BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND: The relationship between glycated hemoglobin (HbA1c) and cognitive impairment in older adults with coronary heart disease (CHD) remains unclear. METHODS: The present study used a prospective cohort study design and included 3244 participants aged ≥ 65 years in Beijing, China. The Mini-Mental State Examination (MMSE) and Montreal Cognitive Assessment (MoCA) were used to assess cognitive function. Serum HbA1c was detected at admission. All patients were divided into high HbA1c group (≥ 6.5 mmol/L) and low HbA1c group (< 6.5 mmol/L) based on their HbA1c levels. Logistic regression analyses were used to evaluate the association between HbA1c and cognitive impairment. RESULTS: In this study of 3244 participants, 1201 (37.0%) patients were in high HbA1c group and 2045 (63.0%) patients were in a state of cognitive impairment. Logistic regression analyses demonstrated that HbA1c was an independent risk factor for cognitive impairment regardless of whether the HbA1c was a continuous or categorical variable (OR = 1.27, 95% CI: 1.15-1.40, P < 0.001; OR = 1.79, 95% CI: 1.41-2.26, P ≤ 0.001, respectively). The restricted cubic spline curve exhibited that the relationship between the HbA1c and cognitive impairment was linear (p for non-linear = 0.323, P < 0.001). CONCLUSION Elevated levels of HbA1c were associated with an increased risk of cognitive impairment in older patients with CHD. These insights could be used to improve the accuracy and sensitivity of cognitive screening in these patient populations.

Probiotics are natural systems bridging synthetic biology, physical biotechnology, and immunology, initiating innate and adaptive anti-tumor immune activity. We previously constructed an all-in-one engineered food-grade probiotic Lactococcus lactis (FOLactis) which could boost the crosstalk among different immune cells such as dendritic cells (DCs), natural killer cells, and T cells. Herein, considering the limited clinical efficacy of naked personalized neoantigen peptide vaccines, we decorate FOLactis with tumor antigens by employing a Plug-and-Display system comprising membrane-inserted peptides. Intranodal injection of FOLactis coated with neoantigen peptides (Ag-FOLactis) induces robust DCs presentation and neoantigen-specific cellular immunity. Notably, Ag-FOLactis not only triggers a 45-fold rise in the quantity of locally reactive neoantigen-specific T cells but also induces epitope spreading in both subcutaneous and metastatic tumor-bearing models, leading to potent inhibition of tumor growth. These findings imply that Ag-FOLactis represents a powerful platform to rapidly and easily display antigens, facilitating the development of a bio-activated platform for personalized therapy.

Osteoarthritis (OA), the most prevalent joint disease of late life, is closely linked to cellular senescence. Previously, we found that the senescence of fibroblast-like synoviocytes (FLS) played an essential role in the degradation of cartilage. In this work, single-cell sequencing data further demonstrated that cartilage acidic protein 1 (CRTAC1) is a critical secreted factor of senescent FLS, which suppresses mitophagy and induces mitochondrial dysfunction by regulating SIRT3 expression. In vivo, deletion of SIRT3 in chondrocytes accelerated cartilage degradation and aggravated the progression of OA. Oppositely, intra-articular injection of adeno-associated virus expressing SIRT3 effectively alleviated OA progression in mice. Mechanistically, we demonstrated that elevated CRTAC1 could bind with NRF2 in chondrocytes, which subsequently suppresses the transcription of SIRT3 in vitro. In addition, SIRT3 reduction could promote the acetylation of FOXO3a and result in mitochondrial dysfunction, which finally contributes to the degradation of chondrocytes. To conclude, this work revealed the critical role and underlying mechanism of senescent FLSs-derived CRTAC1 in OA progression, which provided a potential strategy for the OA therapy.

OBJECTIVE: To compare the efficacy and safety of intravenous colistin sulfate combined with nebulized inhalation versus intravenous monotherapy for pulmonary infections caused by carbapenem-resistant organism (CRO). METHODS: A multicenter retrospective cohort study was conducted. Clinical data were collected from patients admitted to the intensive care unit (ICU) of 10 tertiary class-A hospitals in Henan Province between July 2021 and May 2023, who received colistin sulfate for CRO pulmonary infections. Data included baseline characteristics, inflammatory markers [white blood cell count (WBC), neutrophil count (NEU), procalcitonin (PCT), C-reactive protein (CRP)], renal function indicators [serum creatinine (SCr), blood urea nitrogen (BUN)], life support measures, anti-infection regimens, clinical efficacy, microbiological clearance rate, and prognostic outcomes. Patients were divided into two groups: intravenous group (colistin sulfate monotherapy via intravenous infusion) and combination group ((intravenous infusion combined with nebulized inhalation of colistin sulfate). Changes in parameters before and after treatment were analyzed. RESULTS: A total of 137 patients with CRO pulmonary infections were enrolled, including 89 in the intravenous group and 48 in the combination group. Baseline characteristics, life support measures, daily colistin dose, and combination regimens (most commonly colistin sulfate plus carbapenems in both groups) showed no significant differences between two groups. The combination group exhibited higher clinical efficacy [77.1% (37/48) vs. 59.6% (52/89)] and microbiological clearance rate [60.4% (29/48) vs. 39.3% (35/89)], both P < 0.05. Pre-treatment inflammatory and renal parameters showed no significant differences between two groups. Post-treatment, the combination group showed significantly lower WBC and CRP [WBC (×10⁹/L): 8.2±0.5 vs. 10.9±0.6, CRP (mg/L): 14.0 (5.7, 26.6) vs. 52.1 (24.4, 109.6), both P < 0.05], whereas NEU, PCT, SCr, and BUN levels showed no significant between two groups. ICU length of stay was shorter in the combination group [days: 16 (10, 25) vs. 21 (14, 29), P < 0.05], although mechanical ventilation duration and total hospitalization showed no significant differences between two groups. CONCLUSIONS Intravenous colistin sulfate combined with nebulized inhalation improved clinical efficacy and microbiological clearance in CRO pulmonary infections with an acceptable safety profile.
Humans ; Colistin/therapeutic use* ; Retrospective Studies ; Administration, Inhalation ; Anti-Bacterial Agents/therapeutic use* ; Carbapenems/pharmacology* ; Male ; Female ; Middle Aged ; Gram-Negative Bacteria/drug effects* ; Aged ; Treatment Outcome ; Respiratory Tract Infections/drug therapy*

Osteoporosis is a prevalent skeletal condition characterized by reduced bone mass and strength, leading to increased fragility. Buqi-Tongluo (BQTL) decoction, a traditional Chinese medicine (TCM) prescription, has yet to be fully evaluated for its potential in treating bone diseases such as osteoporosis. To investigate the mechanism by which BQTL decoction inhibits osteoclast differentiation in vitro and validate these findings through in vivo experiments. We employed MTS assays to assess the potential proliferative or toxic effects of BQTL on bone marrow macrophages (BMMs) at various concentrations. TRAcP experiments were conducted to examine BQTL's impact on osteoclast differentiation. RT-PCR and Western blot analyses were utilized to evaluate the relative expression levels of osteoclast-specific genes and proteins under BQTL stimulation. Finally, in vivo experiments were performed using an osteoporosis model to further validate the in vitro findings. This study revealed that BQTL suppressed receptor activator of NF-κB ligand (RANKL)-induced osteoclastogenesis and osteoclast resorption activity in vitro in a dose-dependent manner without observable cytotoxicity. The inhibitory effects of BQTL on osteoclast formation and function were attributed to the downregulation of NFATc1 and c-fos activity, primarily through attenuation of the MAPK, NF-κB, and Calcineurin signaling pathways. BQTL's inhibitory capacity was further examined in vivo using an ovariectomized (OVX) rat model, demonstrating a strong protective effect against bone loss. BQTL may serve as an effective therapeutic TCM for the treatment of postmenopausal osteoporosis and the alleviation of bone loss induced by estrogen deficiency and related conditions.
Animals ; NFATC Transcription Factors/genetics* ; Drugs, Chinese Herbal/pharmacology* ; Ovariectomy ; Osteoclasts/metabolism* ; Female ; Osteogenesis/drug effects* ; Rats, Sprague-Dawley ; Rats ; NF-kappa B/genetics* ; Osteoporosis/genetics* ; Signal Transduction/drug effects* ; Bone Resorption/genetics* ; Cell Differentiation/drug effects* ; Humans ; RANK Ligand/metabolism* ; Mitogen-Activated Protein Kinases/genetics* ; Transcription Factors

To develop a method for determining the antibody-dependent cell-mediated phagocytosis (ADCP) activity of human epidermal growth factor receptor 2 (HER2)-targeted antibody drug conjugate (ADC) based on the reporter gene assay, we established an ADCP activity assay with Jurkat/NFAT/FcγRIIa cells as the effector cells and BT474 as the target cells. Then, the target cell density, the ratio of effector to target cells, the target cell adhesion time, the incubation time for drug administration, and the induction time after adding effector cells were optimized by the method of design of experiment (DOE). The method showed a significant dose-response relationship, which was complied with the four-parameter equation: y=(A-D)/[1+(x/C)^B]+D. The durability ranges of the target cell density, the ratio of effector to target cells, the target cell adhesion time, the incubation time for drug administration, and the induction time after adding effector cells were (2.5-4.0)×10⁵ cells/mL, 3-5, 1.0-2.0 h, 0 h, and 5.0-6.0 h, respectively. The results of the methodological validation showed that the linear equation was y=1.106 8x-0.011 6, r=0.969 2. The established method showed the relative accuracy ranging from -6.59% to 2.98% and the geometric coefficient of variation less than 11% in the intermediate precision test. Furthermore, the method was target-specific. The method was then applied to the determination of ADCP activity of HER2-targeted ADC, demonstrating the result of (103.5±5.7)%. We developed a reporter gene assay for determining the ADCP activity of HER2-targeted ADC and the assay demonstrated high accuracy and good reproducibility, which proposes a highly efficient and approache for evaluating ADCP effect of this HER2-targeted ADC, and also provides a referable technique for characterizing the Fc effector functions of ADCs with diverse targets.
Humans ; Receptor, ErbB-2/immunology* ; Phagocytosis/drug effects* ; Immunoconjugates/immunology* ; Genes, Reporter ; Antibody-Dependent Cell Cytotoxicity ; Jurkat Cells

Nitrogen oxides(NOx=NO+NO2)are important precursors of ozone(O3),and NOx and its oxides together constitute reactive nitrogen oxides(NOy)in the atmosphere.A comprehensive understanding of the total NOy level in the atmosphere is of great significance for a deeper understanding of the atmospheric nitrogen cycle and oxidation,as well as for formulating strategies for air pollution prevention and control.In this work,a thermal decomposition-broadband cavity enhanced absorption spectroscopy(TD-BBCEAS)technique for online measurement of total NOy in the atmosphere was developed.With this method,the NOy was efficiently converted into NO2,and the total NOy concentration in the atmosphere was indirectly obtained by measuring NO2.Focusing on the key factors affecting the measurement of total NOy,the influence of NO titration efficiency and other NOy component TD efficiency on measurement accuracy was emphasized.By changing the oxygen(O2)flow rate through the mercury lamp to alter the O3 concentration for titrating NO,the conversion efficiency of NO was evaluated.At O2 flow rate of 6 mL/min,the conversion efficiency of NO was greater than 99%.TD efficiency testing and analysis on NO2,peroxyacetyl nitrate(PAN),nitric acid(HNO3),and nitrous acid(HONO),which account for a large proportion of atmospheric NOy components,was carried out using 680℃as the optimal TD temperature for efficient conversion of NOy.With NO and HONO sample gases as typical verification gases,the conversion efficiency of NOy and the accuracy of NOy measurement by TD-BBCEAS system were verified by switching the on and off modes of mercury lamp and TD device.At integration time of 60 s,the detection limit of the system for NOy was 2.83×1010 molecules/cm3(60 s,2σ).A comparative measurement of actual atmospheric NOy was conducted between the TD-BBCEAS system and the NOy analyzer.The observation results showed a correlation coefficient(R2)of 0.98 and a slope of 0.93,further verifying the feasibility and accuracy of applying the TD-BBCEAS system to measurement of total NOy.

A method for simultaneous determination of 21 kinds of Aconitum alkaloids(ATS)in biological specimens and infused liquor using ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS)was developed.The biological samples were pretreated with methanol-acetonitrile(1∶2,V/V)for protein precipitation,while infused liquors were diluted 100-fold with acetonitrile,followed by centrifugation,and filtration by a 0.22-μm membrane.Chromatographic separation was carried out on an EC-C18 column using gradient elution with the mixture of 10 mmol/L ammonium acetate and 0.2%formic acid as mobile phase A and acetonitrile as mobile phase B.With this method,all the analytes were separated within 9.5 min.The samples were detected in positive ESI mode with dynamic multiple reaction monitoring(MRM)and quantified via external standard calibration.The results showed that the concentrations of the analytes in the range of 2-1000 ng/mL had excellent linearity(R2>0.9992)with the peak area.The developed method was successfully used for detection of 21 kinds of aconitum alkaloids,with limits of detection of 0.5-2 ng/mL,quantification limits of 2-6 ng/mL,intra/inter-day precision≤6.0%,spiked recoveries of 89.4%-100.9%,extraction recoveries of 74.2%-104.4%,and matrix effects ranging from-11.1%to 9.2%in blood/urine.The method was applied to detection of 12 samples from 4 fatal aconite poisoning cases,and all 21 kinds of ATS with total alkaloid concentrations of 0.04-4.18 μg/mL in blood and 154.96-422.83 μg/mL in medicinal liquors were detected.Tissue distribution revealed that the order of concentrations from highest to lowest is as follows:urine(157.22 μg/mL)>gastric contents(51.37 μg/mL)>kidney(21.6 μg/g)>whole blood(4.18 μg/mL)>liver(0.03 μg/g).This method showed many advantages such as simple pretreatment,low detection limits,accurate quantification,broad analyte coverage,and superior anti-interference capability in complex matrices,proving ideal for forensic and toxicological analysis of aconitum alkaloids.