ObjectiveTo study the changing law of appearance color and physicochemical properties of Angelicae Sinensis Radix Carbonisata（ASRC） during the processing by color space method combined with statistical analysis， so as to provide reference for determining the processing endpoint and evaluating the quality of the decoction pieces. MethodsTaking processing time（4， 8， 12， 16 min） and temperature（180， 200， 220， 240 ℃） as factors， ASRC decoction pieces with different processing degrees were prepared in a completely randomized design. Then， the brightness value（L^*）， red-green value（a^*）， yellow-blue value（b^*）， and total chromaticity value （E^*ab） of the decoction pieces were determined by spectrophotometer， the color difference value（ΔE） was calculated， and the data of colorimetric values were analyzed by discriminant analysis. At the same time， the pH， charcoal adsorption， and contents of tannins， 5-hydroxymethylfurfural（5-HMF）， tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide of ASRC with different processing degrees were determined by pH meter， ultraviolet and visible spectrophotometry and ultra-high performance liquid chromatography（UPLC）. Principal component analysis（PCA） was used to analyze the data of physicochemical indexes， after determining the processing technology of ASRC， the canonical discriminant function was established to distinguish the decoction pieces with different processing degrees， and leave-one-out cross validation was conducted. Finally， Pearson correlation analysis was used to explore the correlation between various physicochemical indexes and chromaticity values. ResultsWith the prolongation of the processing time， L^*， a^*， b^* and E^*ab all showed a decreasing trend， and the established discriminant model based on color parameters was able to distinguish ASRC with different processing degrees. The pH showed an increasing trend with the prolongation of processing time， and the charcoal adsorption， and the contents of tannins， 5-HMF， and tryptophan all showed an increasing and then decreasing trend. Among them， the charcoal adsorption， contents of tannin and 5-HMF reached their maximum values successively after processing for 8-12 min. While the contents of chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide decreased with the increase of processing time， with a decrease of 60%-80% at 8 min of processing. Therefore， the optimal processing time should be determined to be 8-12 min. PCA could clearly distinguish ASRC with different processing degrees， while temperature had no significant effect on the processing degree. The 12 batches of process validation results（10 min， 180-240 ℃） showed that except for 3 batches identified as class Ⅱ light charcoal， all other batches were identified as class Ⅲ standard charcoal， and the chromaticity values of each batch of ASRC were within the reference range of class Ⅱ-Ⅲ sample chromaticity values. The correlation analysis showed that the chromaticity values were negatively correlated with pH and charcoal adsorption， and positively correlated with contents of tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H， and ligustilide. And both pH and charcoal adsorption were negatively correlated with the contents of the above components， but the charcoal adsorption was positively correlated with the content of 5-HMF. ConclusionThe chromaticity values and the contents of various physicochemical indicators of ASRC undergo significant changes with the prolongation of processing time， and there is a general correlation between chromaticity values and various physicochemical indicators. Based on the changes in color and physicochemical indicators， the optimal processing time for ASRC is determined to be 8-12 min. This study reveals the dynamic changes of the relevant indexes in the processing of ASRC， which can provide a reference for the discrimination of the processing degree and the quantitative study of the processing endpoint.

Objective: To evaluate the clinical efficacy of digitally guided precision crown lengthening in secondary aesthetic rehabilitation cases, and to provide a clinical reference for digitally guided crown lengthening procedures and secondary aesthetic restorations. Methods: We present a case of a patient with tetracycline-stained teeth, partial detachment of anterior resin veneers, and gingival margin discrepancies. The patient underwent digitally guided precision crown lengthening followed by secondary aesthetic rehabilitation. Multimodal data, including intraoral, facial, and CBCT scans, were integrated to construct a four-dimensional virtual patient model (incorporating teeth, face, bone, and occlusion) for surgical planning and 3D-printed guide fabrication. Secondary aesthetic restoration was performed after achieving stable post-surgical outcomes. Based on this case, we conducted a detailed analysis and reviewed relevant literature on crown lengthening in secondary aesthetic rehabilitation. Results: The gingival contour of the anterior teeth exhibited significant improvement, with enhanced symmetry and stable gingival margin positioning that closely matched the preoperative design. The crown lengthening procedure demonstrated high precision, and the final outcome was aesthetic and functional. Literature review indicated that secondary restorations frequently present challenges such as gingival contour discrepancies and inflammation. Aesthetic crown lengthening in the anterior region should optimize both soft and hard tissue morphology to meet aesthetic standards, with digital technology improving procedural accuracy. Conclusion Precision crown lengthening effectively addresses gingival margin discrepancies in secondary aesthetic rehabilitation, ensuring stable gingival positioning and superior aesthetic outcomes. This approach is particularly suitable for cases with high aesthetic demands.

Listeria brainstem encephalitis with myelitis is extremely rare in clinical practice.Since the clinical manifestations are non-specific,MRI is helpful for diagnosis.Positive cerebrospinal fluid culture is considered the gold standard for diagnosis.This article reports a case of an immunocompetent individual with listeria brainstem encephalitis with myelitis,aiming to enhance the awareness of this condition.
Humans ; Brain Stem/pathology* ; Diagnostic Errors ; Encephalitis/complications* ; Encephalomyelitis, Acute Disseminated/diagnosis* ; Listeriosis/complications* ; Myelitis/complications*

To explore the value of the diaphragm thickness fraction (TF) and diaphragm mobility (DM) measured by ultrasound for predicting ventilator withdrawal success in patients with acute respiratory distress syndrome (ARDS) after cardiac surgery. Methods: This study included 246 patients undergoing the spontaneous breathing trial. Diaphragmatic function was evaluated by ultrasound, including the diaphragm thickness at the end of calm breathing (thickness of the diaphragm at functional residual capacity [TdiFRC]) and the maximum diaphragm thickness at the end of inspiration (thickness of the diaphragm at full vital capacity [TdiFVC]); TF=(TdiFVC–TdiFRC)/TdiFRC×100%. DM, the oxygenation index (the ratio of the partial pressure of arterial oxygen to the fraction of inspired oxygen), and the rapid shallow breathing index (RSBI) were measured. Results: Successful liberation from mechanical ventilation was observed in 209 patients. There were no significant differences in the TdiFRC (0.3±0.1 cm vs. 0.3±0.1 cm) or TdiFVC (0.3±0.1 cm vs. 0.2±0.1 cm) between the ventilator withdrawal success group and the ventilator withdrawal failure group (P>0.05). The TF was greater in the ventilator withdrawal success group than in the ventilator withdrawal failure group (40.8%±15.8% vs. 37.7%±9.2%, P<0.01). DM in the ventilator withdrawal success group was greater than that in the ventilator withdrawal failure group (1.5±0.5 cm vs. 1.2±0.4 cm, P=0.040). The RSBI was lower in the ventilator withdrawal success group than in the ventilator withdrawal failure group (74.3±25.6 breaths·min–1·L –1 vs. 89.9±34.5 breaths·min–1·L –1, P<0.01). Conclusions: Diaphragmatic ultrasound can be used to predict the success of ventilator withdrawal in patients with ARDS.

Malignant pleural effusion(MPE)is a common complication in patients with advanced malignant tumors,which not only significantly reduces their quality of life but also shortens their survival duration.Despite the widespread use of traditional treatment methods such as thoracentesis and pleurodesis,their efficacy is limited accompanied by high recurrence rates.Therefore,exploring novel therapeutic strategies becomes particularly urgent.In recent years,immunotherapy has attracted extensive attention for its potential in cancer treatment.This article systematically reviews the roles of CD4+T cell subsets,including regulatory T cells(Treg),T helper cell(Th)17,Th9,and Th22 cells,within the immunosuppressive microenvironment of MPE.These cell subsets are involved in the formation of the immunosuppressive state of MPE through various mechanisms and play key roles in the occurrence and development of the disease.In addition,the article discusses in detail the role of immune checkpoint molecules,such as programmed death protein 1(PD-1),PD-1 ligand(PD-L1),and cytotoxic T-lymphocyte-associated protein 4(CTLA-4),in the immune evasion of MPE.The abnormal expressions of these molecules provide opportunity for tumor cells to evade immune system surveillance.At the same time,this article also summarizes the application prospects of novel immunotherapy strategies,such as adoptive cell therapy(ACT)and chimeric antigen receptor T cell(CAR-T)therapy,in the treatment of MPE.These innovative therapies offer possibilities for improving the prognosis of MPE patients through activating and enhancing the anti-tumor immune response.

ObjectiveTo analyze the clinical characteristics and imaging features of effectively treated pediatric Mycoplasma pneumoniae pneumonia （MPP） with pulmonary consolidation， follow up the volume changes of pulmonary consolidation on lung CT scans of the affected children， and investigate the resolution patterns of pulmonary consolidation， and predict the time required for complete resolution. MethodsWe enrolled children with MPP and pulmonary consolidation hospitalized in the Department of General Pediatrics at Children's Hospital of Chongqing Medical University between January 2018 and May 2024. Data collected included demographics， clinical symptoms， laboratory indicators， treatment status， imaging data during hospitalization， as well as follow-up lung CT data and reexamination intervals after discharge. Consolidation volumes were measured before and after the treatment to calculate the resolution rate and resolution velocity. Descriptive statistical analysis was performed on clinical characteristics， imaging features and consolidation resolution. ResultsAmong 238 children with MPP and lung consolidation， females slightly outnumbered males （the male to female ratio is 109 vs.129）， with a mean age of approximately 5 years. At admission， the median cough and fever durations were 7 （5-9） days and 6 （ 4-7） days， respectively. No significant increase was found in white blood cells count or lactate dehydrogenase（LDH）， and hypersensitive high-sensitivity C-reactive protein （CRP） slightly increased. Azithromycin was the first line of treatment in most cases， though second-line drugs increased in the recent two years due to the rising resistance. Bronchoalveolar lavage was performed in 66.8% （159/238） of children， and 33.2% （79/238） did not receive lavage. Consolidation was predominantly unilateral （206 unilateral vs. 32 bilateral） and right-sided （117 right-sided vs. 89 left-sided）. The ratio of consolidation volume to total lung volume was 4.48 （2.61-7.35） %， the consolidation resolution rate at follow-up was 96.08 （ 88.02-98.95） %， the reexamination interval was 17 （ 15-21） days， the resolution velocity was 2.15 （1.23-4.01） cm³/d， and the time to complete resolution was 18.96 （16.14-23.33） days . ConclusionsPulmonary consolidation in pediatric MPP achieves substantial resolution on CT within 2-3 weeks after effective clinical treatment. Initial consolidation volume and resolution velocity can predict the time required for complete resolution， thereby clinically guiding optimal CT follow-up scheduling.

Hongsheng Dan, historically referred to as the "surgical sacred medicine", is at risk of losing its refining technology in contemporary times. This study aimed to preserve and innovate this traditional non-heritage refining technology. By utilizing the analytic hierarchy process(AHP) combined with the entropy weight method, this study established the hierarchical structure model of refining process of Hongsheng Dan and conducted a single factor experiment and an L_9(3~4) orthogonal experiment to optimize the refining method of Hongsheng Dan. Additionally, the study employed infrared thermal imaging to monitor temperature variations of Hongsheng Dan during the refining process. The optimized refining parameters for Hongsheng Dan were established as follows: a slow fire temperature of 175 ℃ with a duration of 30 minutes, a strong fire temperature of 270 ℃ with a duration of 60 minutes, and a tail fire temperature of 180 ℃ with a duration of 15 minutes. The stability and feasibility of this optimized process were confirmed through validation tests. The research focused on the material transformation of Hongsheng Dan, starting from the material changes during the refining process of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid. The study investigated elemental transformations, physical phase changes, and alterations in thermal properties. 78.98% of the mercury in Hongsheng Dan and 80.21% of the mercury in mercuric oxide from nitric acid were retained. The diffraction peak intensity of the(011) crystal plane of Hongsheng Dan was highest at approximately 30.07°, indicating that the(011) crystal plane had a preferred crystalline orientation. Furthermore, the temperature range for the alteration in thermal properties during the refining process of Hongsheng Dan was found to be between 80 ℃ and 130 ℃. This research not only optimized the refining technology of Hongsheng Dan but also pioneered the application of infrared thermal imaging to study temperature changes throughout the refining process. By exploring the material transformation patterns of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid, the study provided technical support for the preservation and innovation of Hongsheng Dan.
Drugs, Chinese Herbal/standards* ; Temperature

OBJECTIVES: To report the development, validation, and findings of the Multi-dimensional Attention Rating Scale (MARS), a self-report tool crafted to evaluate six-dimension attention levels. METHODS: The MARS was developed based on Classical Test Theory (CTT). Totally 202 highly educated healthy adult participants were recruited for reliability and validity tests. Reliability was measured using Cronbach's alpha and test-retest reliability. Structural validity was explored using principal component analysis. Criterion validity was analyzed by correlating MARS scores with the Toronto Hospital Alertness Test (THAT), the Attentional Control Scale (ACS), and the Attention Network Test (ANT). RESULTS: The MARS comprises 12 items spanning six distinct dimensions of attention: focused attention, sustained attention, shifting attention, selective attention, divided attention, and response inhibition.As assessed by six experts, the content validation index (CVI) was 0.95, the Cronbach's alpha for the MARS was 0.78, and the test-retest reliability was 0.81. Four factors were identified (cumulative variance contribution rate 68.79%). The total score of MARS was correlated positively with THAT (r = 0.60, P < 0.01) and ACS (r = 0.78, P < 0.01) and negatively with ANT's reaction time for alerting (r = -0.31, P = 0.049). CONCLUSIONS The MARS can reliably and validly assess six-dimension attention levels in real-world settings and is expected to be a new tool for assessing multi-dimensional attention impairments in different mental disorders.
Humans ; Adult ; Male ; Attention/physiology* ; Female ; Middle Aged ; Reproducibility of Results ; Young Adult ; Psychometrics

Objective: To analyze the nucleic acid load of human parvovirus B19 in major commercially available blood products in China, including human albumin, human intravenous immunoglobulin, human rabies immunoglobulin and various coagulation factor products, aiming to provide evidence for improving blood product manufacturing processes and quality control of source plasma. Methods: A total of 98 batches of coagulation factor products were tested for human parvovirus B19 nucleic acid using real-time fluorescent quantitative PCR, including 42 batches of human prothrombin complex, 35 batches of human coagulation factor Ⅷ, and 21 batches of human fibrinogen. Additionally, 6 batches of human albumin, 6 batches of human intravenous immunoglobulin, and 38 batches of human rabies immunoglobulin were tested for human parvovirus B19 nucleic acid. Results: Human parvovirus B19 nucleic acid were undetectable in human albumin, human intravenous immunoglobulin and human rabies immunoglobulin. Among the 98 batches of coagulation factor products tested for human parvovirus B19 nucleic acid, B19 nucleic acid reactivity rate was 69.0% (29/42) for human prothrombin complex batches, but nucleic acid concentration were all significantly lower than 10 IU/mL. The reactivity rate of B19 nucleic acid in 35 batches of human coagulation factor Ⅷ was 48.6% (17/35), with nucleic acid concentration all below 10 IU/mL. The reactivity rate of B19 nucleic acid in 21 batches of human fibrinogen was 61.9% (13/21), with nucleic acid concentration all below 10 IU/mL. Conclusion: No human parvovirus B19 has been detected in human albumin, human intravenous immunoglobulin, or human rabies immunoglobulin. Human parvovirus B19 nucleic acid may exist in commercially available coagulation factor products, highlighting the need for enhanced screening of human parvovirus B19 nucleic acid in these products. It is also recommended that B19 viral nucleic acid testing be conducted on source plasma, particularly for coagulation factor products.

Objective: To analyze the nucleic acid load of human parvovirus B19 in major commercially available blood products in China, including human albumin, human intravenous immunoglobulin, human rabies immunoglobulin and various coagulation factor products, aiming to provide evidence for improving blood product manufacturing processes and quality control of source plasma. Methods: A total of 98 batches of coagulation factor products were tested for human parvovirus B19 nucleic acid using real-time fluorescent quantitative PCR, including 42 batches of human prothrombin complex, 35 batches of human coagulation factor Ⅷ, and 21 batches of human fibrinogen. Additionally, 6 batches of human albumin, 6 batches of human intravenous immunoglobulin, and 38 batches of human rabies immunoglobulin were tested for human parvovirus B19 nucleic acid. Results: Human parvovirus B19 nucleic acid were undetectable in human albumin, human intravenous immunoglobulin and human rabies immunoglobulin. Among the 98 batches of coagulation factor products tested for human parvovirus B19 nucleic acid, B19 nucleic acid reactivity rate was 69.0% (29/42) for human prothrombin complex batches, but nucleic acid concentration were all significantly lower than 10 IU/mL. The reactivity rate of B19 nucleic acid in 35 batches of human coagulation factor Ⅷ was 48.6% (17/35), with nucleic acid concentration all below 10 IU/mL. The reactivity rate of B19 nucleic acid in 21 batches of human fibrinogen was 61.9% (13/21), with nucleic acid concentration all below 10 IU/mL. Conclusion: No human parvovirus B19 has been detected in human albumin, human intravenous immunoglobulin, or human rabies immunoglobulin. Human parvovirus B19 nucleic acid may exist in commercially available coagulation factor products, highlighting the need for enhanced screening of human parvovirus B19 nucleic acid in these products. It is also recommended that B19 viral nucleic acid testing be conducted on source plasma, particularly for coagulation factor products.