Tesla blood pumps demonstrate a reduced propensity for hemolysis and thrombosis compared with vane blood pumps. Considering the restricted driving force within the secondary flow channel of vane blood pumps, along with the low hydraulic efficiency of conventional Tesla blood pumps and their internal flow characteristics that significantly contribute to hemolysis and thrombosis, this study introduces a set of vanes atop the rotor of the Tesla blood pump. This forms a dual-fluid domain rotor, and an axial dual-outlet volute shell structure is adopted to realize the separation of the fluid domains. Through numerical simulations of the new structure, a comparative analysis was conducted in this study on the internal flow characteristics of double-outlet and single-outlet volute shells, and symmetric and asymmetric cross-sections of the same rotor. The results indicate that the flow field distribution is more uniform under the double-outlet volute shell structure, and overall energy dissipation is decreased. After implementing the double-outlet design, in the asymmetric cross-section, compared with the symmetric cross-section, the fluid velocity gradient and turbulent kinetic energy at the tongue of the septum are reduced, and the fluid velocity gradient at the convergence of the diffuser tube outlets are also decreased. The maximum scalar stress is lower, and the decline in head and efficiency is mitigated. Moreover, compared with the single-outlet volute shell, the hemolysis index in the asymmetric cross-section is reduced. In summary, this paper proposes a novel dual-outlet centrifugal disk blood pumps, which can provide a reference for the structural design and performance optimization of magnetically levitated centrifugal blood pumps.
Heart-Assist Devices ; Humans ; Equipment Design ; Hemolysis ; Computer Simulation

With the development of Internet technology and big data, artificial intelligence has been widely used in the field of clinical anesthesia. In the field of clinical teaching, artificial intelligence has also led to a series of innovations and changes in teaching model, contents, and evaluation. With reference to the current status of the application of artificial intelligence in the field of anesthesia, this article analyzes the possible impact of artificial intelligence on teaching model, teaching effect evaluation, teaching management, and ethical issues in clinical anesthesia teaching, so as to provide a theoretical basis for integrating artificial intelligence into clinical anesthesia teaching practice in the future.

The interventional therapy of vascular stent implantation is a popular treatment method for cardiovascular stenosis and blockage. However, traditional stent manufacturing methods such as laser cutting are complex and cannot easily manufacture complex structures such as bifurcated stents, while three-dimensional (3D) printing technology provides a new method for manufacturing stents with complex structure and personalized designs. In this paper, a cardiovascular stent was designed, and printed using selective laser melting technology and 316L stainless steel powder of 0-10 µm size. Electrolytic polishing was performed to improve the surface quality of the printed vascular stent, and the expansion behavior of the polished stent was assessed by balloon inflation. The results showed that the newly designed cardiovascular stent could be manufactured by 3D printing technology. Electrolytic polishing removed the attached powder and reduced the surface roughness Ra from 1.36 µm to 0.82 µm. The axial shortening rate of the polished bracket was 4.23% when the outside diameter was expanded from 2.42 mm to 3.63 mm under the pressure of the balloon, and the radial rebound rate was 2.48% after unloading. The radial force of polished stent was 8.32 N. The 3D printed vascular stent can remove the surface powder through electrolytic polishing to improve the surface quality, and show good dilatation performance and radial support performance, which provides a reference for the practical application of 3D printed vascular stent.
Humans ; Stainless Steel ; Powders ; Cardiovascular System ; Constriction, Pathologic

Objective:To explore the value of the logistic regression model with three-dimensional CT quantitative parameters in combination with qualitative parameters in predicting the invasiveness of pure ground glass nodules (pGGN).Methods:The clinical data and image features of 191 patients (196 lesions) with pGGN on CT confirmed as lung adenocarcinoma by pathology from April 2019 to December 2019 in Anhui Chest Hospital were retrospectively analyzed. Totally, 196 lesions were divided into atypical adenomatous hyperplasia (AAH)+adenocarcinoma in situ (AIS)+minimally invasive adenocarcinoma (MIA) group ( n=128) and invasive adenocarcinoma (IAC) group ( n=68). CT quantitative parameters included the maximum diameter, volume, average CT value and quality of pGGN, and the qualitative parameters included the intrinsic vascular changes, abnormal air-bronchogram, lobulated signs, bubble-like sign, pleura-traction sign, and fuzzy tumor-lung interface sign. The Mann-Whitney U test was used to compare the quantitative parameters and the Pearson χ 2 test was used to compare the qualitative parameters between two groups. The independent predictors of IAC and predictive probability value were screened by univariate analysis in combination with multivariate logistic regression analysis. The ROC curves were drawn to compare the diagnostic probability of logistic regression prediction probability and each single parameter. Results:There were statistically significant differences in maximum diameter [0.92(0.77,1.14) cm vs. 1.41(1.12, 1.93) cm, Z=-7.366, P<0.001], volume[0.31(0.20, 0.53) cm 3 vs. 0.88(0.41, 2.00) cm 3, Z=-6.254, P<0.001], average CT value[-571.5(-637.2, -477.0) HU vs. -418.1(-532.4, -338.5) HU, Z=-5.882, P<0.001], quality[0.14(0.09, 0.25) g vs. 0.42(0.26, 1.21) g, Z=-7.438, P<0.001], intrinsic vascular changes(23 vs. 49, χ2=55.906, P<0.001), abnormal air-bronchogram(13 vs. 30, χ2=29.908, P<0.001) and pleura-traction sign(39 vs. 32, χ2=5.291, P=0.021) between the two groups. The logistic regression analysis showed that the maximum diameter, average CT value, intrinsic vascular changes and abnormal air-bronchogram were the independent risk factors of IAC, and the odds ratio value(95%CI) were 10.624(1.275-88.522), 1.004(1.000-1.008), 3.424(1.458-8.043) and 2.993(1.114-8.043), respectively. The ROC curve demonstrated that the area under the curve, sensitivity and specificity of the logistic regression model were 0.899, 0.912, and 0.711 respectively, which were better than separate analysis results from each single parameter. Conclusion:The logistic regression model with a combination of three-dimensional CT quantitative and qualitative parameters can predict the invasiveness of pGGN better.

Objective To analyze the gonadal hormone and seminal plasma of patients with abnormal semen liquefaction and investigate the influence mechanism in order to provide guidance for the diagnosis and treatment. Methods 152 men of childbearing age were divided into two groups according to the liquefaction time (cut?off point: 60 minutes). Routine semen parameters,gonadal hormone and seminal plasma were tested and compared between the above groups. T?test was applied to compare individual gland function (pH value,neutralα?glycosidase,fructopyranose,seminal plasma zinc and citric acid) and gonadal hormone (FSH,LH,PRL,T and E2). Logistic regression analysis was adopted to probe the influencing factors for abnormal semen liquefaction. Results Seminal pH value (7.47 ± 0.13 vs. 7.32 ± 0.18),citric acid(51.12 ± 12.95 vs. 83.11 ± 33.46)and FSH (4.40 ± 1.03 vs. 4.85 ± 1.50)levels were significant different between the two groups (P < 0.05),but the other indexes showed no significant difference. Correlation regression analysis showed that semen liquefaction capacity has correlative relationship with seminal plasma fructose (OR=2.644),citric acid (OR=0.922),serum T (OR=1.029) and E2,while no correlative relationship with other indexes. Conclusions Correlation between two glands (seminal vesicle and prostate) and balance in the two hormones (T and E2) influence the liquefaction time. Specific causes should be distinguished before diagnosis.

Objective To compare the effect of kidney-tonifying blood-activating recipe (KBR) and Aescuven Forte Tablets ( AFT) in improving the sperm quality of varicocele-induced male sterility, thus to optimize the therapeutic therapy for varicocele-induced male sterility. Methods A total of 102 varicocele-induced male sterility with abnormal sperm parameters after conservative treatment were randomized into KBR group (N=53) and AFT group ( N=49) . KBR group was given KBR plus natural vitamin E and AFT group was given AFT plus natural vitamin E, and the treatment lasted for 8 continuous weeks. Before and after treatment, the quality of seminal fluid was analyzed, sperm quantization parameters such as total number of sperm (TNS) , total number of progressive motility sperm ( TNPS) , total number of normal form sperm ( TNNS) and total number of nor mal form and progressive motility sperm ( TNNPS) were observed, and the improvement rate of sperm quantization parameter was compared. Results (1) Before treatment, the differences of TNS, TNPS, TNNS and TNNPS were insignificant between the two groups ( P>0.05) . After treatment, TNNS was not improved in AFT group ( P>0.05) , but TNS, TNPS, TNNPS were much improved in both groups ( P<0.01 compared with those before treatment) . The improvement of KBR group was superior to that of AFT group ( P<0.05) . ( 2) The improvement rate for TNS, TNPS, TNNS, TNNPS was 90.57%, 79.25%, 67.92%, 77.36%in KBR group, and was 75.51%, 73.47%, 28.57%, 61.22% in AFT group respectively. The improvement rate for TNS and TNNS in KBR group was superior to that in AFT group ( P<0.05 or P<0.01) . Conclusion Varicocele-induced male sterility patients usually have the syndrome of kidney deficiency and blood stasis, so KBR, which has the function of tonifying kidney and activating blood, has synergistic action on the effect of AFT in improving sperm quality of varicocele-induced male sterility patients.