Objective:To investigation the situation of water improvement projects in villages affected by drinking water-type endemic fluorosis in Qinghai Province and the prevalence of dental fluorosis among children, in order to provide a basis for consolidating the achievements in prevention and control of drinking water-type endemic fluorosis and adjusting prevention and control measures.Methods:The monitoring data on drinking water-type endemic fluorosis were collected from the disease prevention and control centers in various counties of Qinghai Province from 2021 to 2023, the situation of water improvement projects, the fluorine content of domestic drinking water and the prevalence of dental fluorosis in children aged 8 to 12 years old were retrospectively analyzed.Results:From 2021 to 2023, the numbers of villages affected by drinking water-type endemic fluorosis in Qinghai Province were 338, 335, and 328, respectively. The numbers of water improvement projects were 125, 127 and 124, respectively. The normal operation rates were 100%, 100% and 99.19% (123/124), respectively. The qualified rates of water fluoride level were 100%, 99.21% (126/127) and 99.19% (123/124), respectively. The detection rates of dental fluorosis among children aged 8 to 12 were 4.34% (515/11 877), 5.70% (646/11 331) and 4.48% (490/10 943), respectively. There was a statistically significant difference in the detection rate of dental fluorosis among children in different years (χ 2 = 22.79, P < 0.001). Conclusions:The overall operation status of water improvement project in villages affected by drinking water-type endemic fluorosis in Qinghai Province is generally good, but there has been some relaxation in management and maintenance in the later stage, and there is a phenomenon of project intermittency. The detection rate of dental fluorosis among children aged 8 to 12 remains low, and endemic fluorosis caused by drinking water is under continuous control.

Objective:To analyze the differences in determination of fluoride level in drinking water by ion-selective electrode method and high-throughput rapid determination method.Methods:The precision test was carried out by using the two methods to measure two kinds of fluoride standard substances, water samples of external quality control assessment from 2021 to 2023 (two kinds each year) and the fluoride level in three drinking water samples (for 5 times/each sample). Accuracy testing was conducted by measuring the external quality control assessment water samples and the spiked recovery rates drinking water, and water samples were grouped (water fluoride ≤1.00, > 1.00 mg/L) and analyzed according to the "Hygienic Standards for Drinking Water" (GB 5749-85). SPSS 23.0 software was used for statistical analysis of the measurement results.Results:(1) The correlation coefficients ( r) of the working curves of the two methods were both > 0.990, meeting the quality control requirements. (2) In the precision test, when comparing the results of the two methods for detecting two kinds of fluoride standard substances, there was no statistically significant difference ( F = 0.36, 0.15, P = 0.564, 0.707), and the coefficients of variation ( CV) were all < 5%. The CV of the detection results of the external quality control assessment water samples and drinking water samples were < 5%. (3) In the accuracy test, when the fluoride concentration in water was ≤1.00 mg/L, there was no statistically significant difference in the spiked recovery rates between the two methods ( F = 0.49, P = 0.504). When the fluoride concentration in water was > 1.00 mg/L, there was a statistically significant difference in the spiked recovery rates between the two methods ( F = 24.75, P = 0.003). Conclusions:The ion-selective electrode method has the advantages of wide detection range and wide adaptability, while the high-throughput rapid determination method has high accuracy. Testing personnel can weigh and choose the appropriate determination method based on the actual laboratory conditions and sample concentration range.

Objective To study the influences of the structural parameters of the pump head flow channel on the energy dissipation of injection pumps and optimize the pump head flow channel structural parameters.Methods Firstly,three structural parameters of the injection pump head flow channel,namely the input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter,were selected as the experimental factors for orthogonal experimental design,and the total entropy production values of the injection pump head flow channels with different structures were obtained through entropy production analysis;secondly,the effects of the three structural parameters on the total entropy production values were explored with the range method;finally,the Kriging interpolation proxy model analysis and computational fluid dynamics(CFD)numerical analysis of the injection pump head flow channel were carried out to determine the effects of the combinations of the three structural parameters by pairs on the total entropy production values,and the structural parameters of the injection pump head flow channel were optimized with the objective of energy dissipation.Results The minimum total entropy production value was 2 783 970 mW/K,which was 29.8%lower than that in case of the initial structure(3 966 072 mW/K),when the input chamber diameter was 4.8 mm,the connecting chamber diameter was 0.32 mm and the plunger rod chamber diameter was 1.0 mm;the three structural parameters had significant differences in the effects on the total entropy production value,ordered as the plunger rod chamber diameter,the input chamber diameter and the connecting chamber diameter;considering the energy dissipation,the total entropy production value was minimized in case of the minimal input chamber diameter,the maximal connecting chamber diameter and the medium-sized plunger rod chamber diameter.Conclusion The input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter have differences in the sensitivity to the effects on the energy dissipation of the injection pump head flow channel,and the structural parameters of the head flow path can be optimized accordingly with the goal of minimizing energy dissipation.[Chinese Medical Equipment Journal,2025,46(9):28-32]

Objective:To explore the equity and driving path of primary healthcare human resource allocation across 31 provinces in China,providing references for optimizing such allocations.Methods:Using data from the 2022 primary healthcare human resources in 31 provinces in China,the Health Resource Density Index(HRDI)was used to measure the equity of primary healthcare human resource allocation.The fuzzy-set Qualitative Comparative Analysis(fsQCA)was applied to construct configurational pathways influencing on allocation patterns.Results:In 2022,the HRDI for primary healthcare human resources in China was 2.349 0 in the East,1.198 6 in the Central region,and 0.775 2 in the West.Configurational analysis revealed three paths that promote high equity:the internal-external balance-driven model(H1),the government-led model(H2),and the economic-demand combined model(H3),with overall consistency and coverage of 0.955 and 0.794,respectively.Seven paths lead to low equity:internal-external constraint models(L1,L2),economic constraint models(L3),and demand constraint models(L4,L5,L6,L7),with overall consistency and coverage of 0.967 and 0.795,respectively.Conclusions:Significant regional disparities exist in the equity of primary healthcare human resource allocation in China.Population density is a critical factor influencing allocation equity.The collaboration of various factors contributes to enhancing the equity of primary healthcare human resources distribution.Therefore,future efforts to enhance equity should focus on promoting inter-regional mobility and resource sharing,while precisely addressing regional shortcomings to achieve high equity in primary healthcare human resource allocation.

With the rapid development of generative artificial intelligence(GAI)technologies,their widespread application in academic research and writing is continuously expanding the boundaries of sci-entific inquiry.However,this trend has also raised a series of ethical and regulatory challenges,inclu-ding issues related to authorship,content authenticity,citation accuracy,and accountability.In light of the growing involvement of AI in generating academic content,establishing an open,controllable,and trustworthy ethical governance framework has become a key task for safeguarding research integrity and maintaining trust within the academic community.This expert consensus outlines ethical requirements across key stages of AI-assisted academic writing-including topic selection,data management,citation practices,and authorship attribution.It aims to clarify the boundaries and ethical obligations surrounding AI use in academic writing,ensuring that technological tools enhance efficiency without compromising in-tegrity.The goal is to provide guidance and institutional support for building a responsible and sustainable research ecosystem.

Objective:To investigate lymph node metastasis(LNM)in the prostatic anterior fat pad(PAFP)of PCa patients after robot-assisted radical prostatectomy(RARP),and analyze the clinicopathological features and prognosis of LNM in the PAFP.Methods:We retrospectively analyzed the clinicopathological data on 1 003 cases of PCa treated by RARP in the Department of Urolo-gy of PLA General Hospital from January 2017 to December 2022.All the patients underwent routine removal of the PAFP during RARP and pathological examination,with the results of all the specimens examined and reported by pathologists.Based on the pres-ence and locations of LNM,we grouped the patients for statistical analysis,compared the clinicopathological features between different groups using the Student's t,Mann-Whitney U and Chi-square tests,and conducted survival analyses using the Kaplan-Meier and Log-rank methods and survival curves generated by Rstudio.Results:Lymph nodes were detected in 77(7.7％)of the 1 003 PAFP samples,and LNM in 11(14.3％)of the 77 cases,with a positive rate of 1.1％(11/1 003).Of the 11 positive cases,9 were found in the upgraded pathological N stage,and the other 2 complicated by pelvic LNM.The patients with postoperative pathological stage≥T3 constituted a significantly higher proportion in the PAFP LNM than in the non-PAFP LNM group(81.8％[9/11]vs 36.2％[359/992],P=0.005),and so did the cases with Gleason score ≥8(87.5％[7/8]vs 35.5％[279/786],P=0.009).No statisti-cally significant differences were observed in the clinicopathological features and biochemical recurrence-free survival between the pa-tients with PAFP LNM only and those with pelvic LNM only.Conclusion:The PAFP is a potential route to LNM,and patients with LNM in the PAFP are characterized by poor pathological features.There is no statistically significant difference in biochemical recur-rence-free survival between the patients with PAFP LNM only and those with pelvic LNM only.Routine removal of the PAFP and inde-pendent pathological examination of the specimen during RARP is of great clinical significance.

Objective:To investigate the anatomical characteristics of the atlantoaxial joint associated with nonuniform settlement of the C 2 lateral mass (C 2LM-NUS) and its correlation with atlantoaxial osteoarthritis. Methods:A retrospective analysis was conducted on clinical and imaging data of 522 hospitalized patients (288 males, 234 females; mean age 60.8±11.2 years; range 18-83 years) who underwent CT scans of the head/neck or cervical spine at the Second Affiliated Hospital of Army Medical University between January 1, 2022 and December 31, 2022. Multiplanar reconstruction of CT data was performed to measure the settlement of the C 2 lateral mass (C 2LMS). Patients with a difference in bilateral C 2LMS (d-C 2LMS) >1.4 mm were classified into the C 2LM-NUS group (137 cases; 71 males, 66 females; mean age 63.3±11.6 years), while the normal group included 385 patients (217 males, 168 females; mean age 59.9±11.0 years). Imaging parameters of the atlantoaxial joint were measured, including the C 1, 2 coronal inclination angle (C 1, 2 CI), atlanto-dental interval (ADI), lateral atlanto-dental interval (LADI), coronal deviation angle of the odontoid (Od-CDA), and C 1, 2 relative rotation angle (C 1, 2 RRA). Osteoarthritis prevalence was recorded. A normal C 0-C 3 finite element (FE) model was constructed using CT data from a 48-year-old female in the normal group. A C 2LM-NUS FE model was developed based on anatomical differences between the C 2LM-NUS and normal groups, and stress distribution on the C 2 lateral mass articular surface was analyzed under flexion-extension, lateral bending, and axial rotation torques. Results:The C 2LM-NUS group exhibited asymmetric atlantoaxial joint morphology, with bilateral differences in C 1, 2CI and LADI of 8.5°(5.8°, 11.3°) and 0.8(0.1, 1.4) mm, respectively, significantly greater than those in the normal group [1.7°(0.8°, 2.7°) and 0.2(0.1, 0.5) mm, P<0.05]. Od-CDA and C 1, 2RRA were 3.9°(2.0°, 5.4°) and 7.2°(5.0°, 10.0°) in the C 2LM-NUS group, exceeding the normal group's values [0°(0°, 1.0°) and 0°(0°, 5.5°), P<0.05]. The prevalence of C 2LM-NUS was 37.8% in the atlantoaxial osteoarthritis group, significantly higher than in the non-osteoarthritis group (22.8%, P<0.05). Significant differences were observed in age (68.3±9.4 vs. 58.6±10.8 years), sex distribution (50/69 vs. 238/165), and C 1, 2RRA [5.6°(0°, 8.2°) vs. 3.8°(0°, 6.2°)] between the osteoarthritis and non-osteoarthritis groups ( P<0.05). After adjusting for age, sex, and C 1, 2RRA, binary logistic regression identified C 2LM-NUS as an independent risk factor for atlantoaxial osteoarthritis [ OR=2.024, 95% CI (1.300, 3.150), P<0.001]. FE analysis demonstrated a reduced C 1, 2 range of motion in the C 2LM-NUS model, with elevated stress concentrations on the settled side lateral mass during simulated flexion-extension, lateral bending, and rotation. Conclusions:The study indicated that C 2LM-NUS is associated with asymmetric anatomical changes in the atlantoaxial joint, increasing the risk of osteoarthritis. Stress concentration on the C 2 lateral mass articular surface, caused by C 2LM-NUS, is a biomechanical contributor to this heightened risk.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

This study aimed to comprehensively examine the association of gallstones, cholecystectomy, and cancer risk. Multivariable logistic regressions were performed to estimate the observational associations of gallstones and cholecystectomy with cancer risk, using data from a nationwide cohort involving 239 799 participants. General and gender-specific two-sample Mendelian randomization (MR) analysis was further conducted to assess the causalities of the observed associations. Observationally, a history of gallstones without cholecystectomy was associated with a high risk of stomach cancer (adjusted odds ratio (aOR)=2.54, 95% confidence interval (CI) 1.50-4.28), liver and bile duct cancer (aOR=2.46, 95% CI 1.17-5.16), kidney cancer (aOR=2.04, 95% CI 1.05-3.94), and bladder cancer (aOR=2.23, 95% CI 1.01-5.13) in the general population, as well as cervical cancer (aOR=1.69, 95% CI 1.12-2.56) in women. Moreover, cholecystectomy was associated with high odds of stomach cancer (aOR=2.41, 95% CI 1.29-4.49), colorectal cancer (aOR=1.83, 95% CI 1.18-2.85), and cancer of liver and bile duct (aOR=2.58, 95% CI 1.11-6.02). MR analysis only supported the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer. This study added evidence to the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer, highlighting the importance of cancer screening in individuals with gallstones.
Humans ; Mendelian Randomization Analysis ; Gallstones/complications* ; Female ; Male ; Cholecystectomy/statistics & numerical data* ; Middle Aged ; Risk Factors ; Aged ; Adult ; Neoplasms/etiology* ; Stomach Neoplasms/epidemiology*