[This corrects the article DOI: 10.1016/j.apsb.2019.01.013.].

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Objective To investigate the characteristics of epitope distribution on HLA class Ⅰ antigen in the regular platelet donors from Nanjing area and establish the HLA epitope database for regular platelet donors.Methods High-resolution HLA typing was per-formed using Sanger method for the blood samples from 649 regular platelet donors in Nanjing area.The polymorphism of HLA antigen epitopes corresponding to the high-resolution HLA typing results was analyzed using the HLA Eplet Registry website.The frequencies of allele frequencies,HLA haplotype,and HLA antigen epitope were calculated by using the direct counting method.Results Among the 649 regular platelet donors,38 HLA-A alleles were detected,corresponding to 36 HLA-A epitopes,and the higher frequencies were 79GT,144K and 138MI.Seventy-three HLA-B alleles were detected corresponding to 35 HLA-B epitopes,and the higher frequencies were 131S,69TNT,and 80N.Sixty-four HLA class Ⅰ antigen epitopes were detected,in which the higher frequencies were 79GT,131S,and 144K.Conclusions The distribution of HLA antigen epitopes in the regular platelet donors of Nanjing area exhibited u-nique polymorphic characteristics.The epitope matching strategies should be established based on the distribution characteristics of HLA antigen epitopes,which may expand the range of available donors and reduce the incidence of platelet transfusion refractoriness.

Standardization is the universal language of the world, and standardization of traditional Chinese medicine (TCM) is essential for its communication in China and globally. However, the principles and methods of TCM acupuncture standardization have been unclear and inadequate in the early stages. Based on an investigative approach to understanding the current status, identifying problems, and finding solutions, our team has established basic principles of TCM acupuncture that embody Chinese wisdom, evaluated the international strategic environment systematically, proposed the principle of “importance of harmony and exercise of impartiality”, and established basic working principles. A series of methods for TCM acupuncture standard development and evaluation have been constructed, including general standards for the revision of TCM acupuncture standards, the first TCM acupuncture clinical research management specification, a shared full chain technology platform, a data center, and an evaluation research base for TCM acupuncture clinical research. Evaluation criteria for ancient literature and expert experience, a recommendation method for the “three main and three auxiliaries” TCM guideline for prevention were established, and quantifiable assessment methods of TCM standard applicability were proposed. These findings provide methodological guidance for TCM acupuncture standardization.

Objective    To assess mid- and long-term outcomes and share our clinical method of reduction ascending aortoplasty (RAA) in adult patients undergoing aortic valve replacement (AVR). Methods    We retrospectively analyzed clinical data of 41 adult patients with aortic valve disease and ascending aortic dilatation before and after operation of RAA+AVR in Fuwai Hospital from January 2010 to July 2017. There were 28 male and 13 female patients aged 28-76 (53.34±12.06) years. Twenty-three patients received AVR+RAA using the sandwich technique (a sandwich technique group), while other 18 patients received AVR+ascending aorta wrap (a wrapping technique group). Ascending aorta diameter (AAD) was measured by echocardiography or CT scan preoperatively and postoperatively. Results    There was no perioperative death. The mean preoperative AAD in the sandwich technique group and the wrapping technique group (47.04±3.44 mm vs. 46.67±2.83 mm, P=0.709) was not statistically different. The mean postoperative AAD (35.87±3.81 mm vs. 35.50±5.67 mm, P=0.804), and the mean AAD at the end of follow-up (41.26±6.54 mm vs. 38.28±4.79 mm, P=0.113) were also not statistically different between the two groups. There were statistical differences in AAD before, after operation and at follow-up in each group. All 41 patients were followed up for 23-108 (57.07±28.60) months, with a median follow-up of 51.00 months. Compared with that before discharge, the AAD growth rate at the last follow-up was –1.50-6.78 mm/year, with a median growth rate of 0.70 mm/year, and only 3 patients had an annual growth rate of above 3 mm/year. Conclusion    Mid- and long-term outcomes of RAA in adult patients undergoing AVR with both methods are satisfying and encouraging.

OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5^th preparation to the 13^th preparation (P > 0.05). The predicted score of the 14^th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.
Humans ; Tooth Preparation, Prosthodontic/methods* ; Incisor ; Learning Curve ; Crowns ; Tooth Preparation ; Ceramics ; Dental Porcelain ; Dental Prosthesis Design

The appropriate needle device is crucial for obtaining the curative effect of fire needling therapy. The article introduces the material specification, clinical operation, indications, characteristics and advantages of the contemporary traditional fire needling devices (e.g. He's fire needle and Shi 's fire needle) and the contemporary new-type ones (e.g. fire needling with filiform needle and micro-needle); and determines the innovations of modern fire needling. It is anticipated that the needle specifications, production process and operation standard of fire needling devices should be further unified so as to provide the references for the selection of fire needling devices in treatment based on clinical syndrome differentiation and expand the clinical application of fire needling therapy.
Humans ; Male ; Acupuncture Points ; Acupuncture Therapy ; Needles

Physicians in the past dynasties have improved the theory of fire needling from the aspects of fire needling instruments, clinical efficacy, application scope, operation, precautions, etc., which promoted the clinical application of fire needling. Modern fire needling breaks through the traditional clinical taboos such as heat syndrome, face, forbidden acupoints, and no needle retention. By using modern fire needling with various types, characteristics and functions, multiple needles and multiple methods are used to treat various diseases, which can further exert the therapeutic effect of fire needling and promote the popularization and application of fire needle therapy.
Acupuncture Therapy ; Acupuncture Points ; Vascular Surgical Procedures ; Needles ; Treatment Outcome

Objective Comprehensively considering the effectiveness and safety of massage, a method for evaluating the pros and cons of oscillation excitation and pulse excitation for lumbar oblique-pulling manipulation was proposed, and lumbar oblique-pulling manipulation under oscillation excitation was optimized. Methods A multi-rigid body biomechanical model of thoracolumbar spine was established. The manipulation force was used as the input force of the model. Using MATLAB/Simulink, variation of the displacement and acceleration of each lumbar segment with time was simulated. For the optimization of lumbar massage manipulation, the core elements of massage force, namely, frequency (f) and operand (n) were changed, and then the maximum relative displacement and maximum acceleration of each lumbar segment were compared. A new index z was proposed to comprehensively evaluate effectiveness and safety of the manipulation. Results The maximum relative displacement of each lumbar segment was almost equal when lumbar oblique-pulling manipulation under two kinds of excitation was applied. For lumbar oblique-pulling manipulation, the maximum acceleration of each lumbar segment under oscillation excitation was significantly smaller than that under pulse excitation. When the frequency of massage was 1-2.5 Hz, the overall effect of massage was better, and the overall effect had no relation with the operands, and the force of massage lasted for one operand; when the frequency of message was 3.33 Hz and the operands were more than 5, the massage had the best effect, meanwhile the strength of each lumbar segment was relatively large; when the frequency of massage exceeded 5 Hz, and the overall performance of massage was not good. Conclusions Lumbar oblique-pulling manipulation under oscillation excitation is safer than that under pulse excitation. The research findings provide doctors with a reasonable range of operating parameters for lumbar oblique-pulling manipulation under pulse excitation.

Objective    To explore risk factors associated with mortality and restenosis after the surgery for congenital pulmonary venous stenosis (CPVS) combined with congenital heart disease. Methods    From May 2007 to August 2019, 58 patients received surgical relief of CPVS combined with congenital heart disease, including 24 males and 34 females, aged 17.2±26.3 months, weighing 8.8±8.2 kg. Endpoints were death and restenosis, and the risk factors were analyzed. A univariate and multivariate risk analyses were performed. Results    Preoperative pulmonary venous stenosis severity score (PVSSS) was 4.5±2.7. Average pulmonary vein counts with CPVS was 1.9±1.0. There were 2 (3.4%) early deaths. The mean follow-up time was 2-145 (49.8±40.0) months. The 1-, 2-, 3- and 5-year overall survival rates were 86.7%, 81.3%, 78.5% and 73.6%, respectively, and the pulmonary venous restenosis-free rates were 79.6%, 68.5%, 68.5% and 68.5%, respectively. Preterm birth was an independent risk factor for mortality. The pulmonary venous peak flow rate ≥ 1.2 m/s at discharge was an independent risk factor for mortality and restenosis. Conclusion    The prognosis of CPVS is still poor. Postoperative residual stenosis at discharge is an independent risk factor for death and restenosis.