ObjectiveTo explore the clinical efficacy of Juanbitang hot compress pack combined with intensive rehabilitation training in stroke patients with hemiplegia. MethodsA total of 80 stroke patients with hemiplegia were selected and assigned into a control group （40 cases） and an observation group （40 cases） according to the random number table method. The control group received conventional rehabilitation training and nursing intervention，while the observation group was additionally treated with Juanbitang hot compress pack. The two groups were compared in terms of the neurological function （national institute of health stroke scale score，NIHSS score），muscle strength，motor function （fugl-meyer assessment scale score，FMA score），daily living activity （modified barthel index，MBI），balance ability （berg balance scale score，BBS score），trunk control ability （Sheikh Trunk Control Test score，Sheikh TCT score），and homocysteine （Hcy） level before and after treatment. ResultsAfter treatment，the observation group had lower NIHSS score and Hcy level than the control group （P<0.05）. The total response rate of the observation group （97.50%） was higher than that of the control group （77.50%）. The scores of upper limb and lower limb FMA，MBI，BBS，and Sheikh TCT in the observation group were all higher than those in the control group （P<0.05）. ConclusionThe application of Juanbitang hot compress pack combined with rehabilitation training can effectively improve the neurological function，muscle strength，motor function，daily living ability，balance ability，and trunk control ability and reduce the Hcy level in stroke patients with hemiplegia，demonstrating enhanced clinical efficacy.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Background The prevalence of low back pain among workers using vibrating tools in the automobile manufacturing industry is high; however, research on associated risk factors remains limited. Objective To investigate the association between use of vibrating tools and low back pain among automobile manufacturing workers, and to estimate related population attributable risk percentage (PAR%). Methods A cross-sectional survey was conducted using the Chinese Musculoskeletal Disorders Questionnaire among workers with over one year of service in an automobile manufacturing enterprise. Workers were categorized into an exposed group (vibrating tool users) and a control group (non-users) based on their use of vibrating tools during work. The variables showing statistically significant differences between the two groups were selected as covariates for matching by 1∶2 nearest-neighbor propensity score. Chi-square test was used to compare the prevalence of low back pain between the matched exposed and control groups. Log-binomial regression model was employed to calculate the prevalence ratio (PR), and the PAR% of low back pain attributable to vibrating tool use was subsequently determined. Results A total of 6973 valid questionnaires were collected, comprising 5676 males and 1297 females, with an overall low back pain prevalence of 40.3% (2809/6973). The exposed group included 1255 workers (1134 males, 121 females), with a mean age of (44.2 ± 8.7) years and a mean tenure in the current position of (23.5 ± 9.9) years; the matching control group consisted of 2510 workers (2279 males, 231 females), with a mean age of (44.7 ± 8.6) years and a mean tenure in the current position of (24.0 ± 10.0) years. The prevalence of low back pain was 76.7% (963/1255) in the exposed group, significantly higher than the 29.9% (750/2510) in the control group (P<0.001). The log-binomial regression analysis showed a PR of 2.57 (95%CI: 2.28, 2.90) for the exposed group, with a PAR% of 22.03%. Conclusion The use of vibrating tools among automobile manufacturing workers is positively associated with reporting low back pain. Implementing effective measures to mitigate vibration hazards is crucial for reducing the burden of low back pain in this population.

AIM: To explore the relationship between hyperopia reserve and ocular biometric parameters in 4-14 year-old Uyghur students from Hotan County, Xinjiang, and to provide scientific evidence for myopia prevention.METHODS: From September 1 to October 31, 2023, a stratified random cluster sampling method was used to select 3 264 students(3 264 eyes)from 6 schools in Hotan County. Participants underwent uncorrected distance visual acuity testing, cycloplegic refraction, and ocular biometric measurements. The correlation between spherical equivalent(SE)and ocular biometric parameters was analyzed by multiple linear regression.RESULTS: A total of 1 998 non-myopic students(1 998 eyes)were included in the study, with 1 354 students(67.77%)showing insufficient hyperopia reserve. The detection rate of insufficient hyperopia reserve decreased with age, from 94.12% at age 4 to 18.13% at age 14(P<0.001). Multiple linear regression analysis showed that in the group with sufficient hyperopia reserve, age, gender, uncorrected distance visual acuity, axial length(AL), and keratometry(K)explained 66.5% of the variance in SE; while in the group with insufficient hyperopia reserve, these factors explained only 28.0% of the SE variance.CONCLUSION: In non-myopic Uyghur students aged 4-14 in Hotan County, Xinjiang, the detection rate of insufficient hyperopia reserve was 67.77%. In the group with insufficient hyperopia reserve, age, gender, AL, and K explained only a small portion of the SE variance, suggesting that the refractive status of this population may be influenced by more complex factors.

Objective To explore the clinical and genetic characteristics of children with holocarboxylase synthetase(HLCS)deficiency.Methods A retrospective analysis was conducted on the clinical data of 3 children with HLCS deficiency who were admitted to Children's Hospital Affiliated to Zhengzhou University from December 2014 to January 2024.Relevant literature indexed in CNKI,Wanfang Data,PubMed and other databases was reviewed to summarize the clinical characteristics and HLCS gene mutations of children with HLCS deficiency.Results All 3 children were male,with onset age of 4-6 months.The main clinical manifestations included shortness of breath,vomiting,diarrhea,and poor mental state,and partial cases were complicated by growth retardation and neurological symptoms.Laboratory tests showed metabolic acidosis in all cases,blood amino acid and acylcarnitine profiles as well as urinary organic acid analysis suggested multiple carboxylase deficiency.Genetic testing revealed compound heterozygous mutation in the HLCS gene of all 3 children,among which the c.1892delT(p.L631X)mutation was previously unreported.According to the guidelines of the American College of Medical Genetics and Genomics(ACMG),the c.1892delT(p.L631X)mutation was rated as pathogenic mutation(PVS1+PM2_supporting+PM3).Biotin supplementation was effective in all cases.Literature review included 27 English literatures and 29 Chinese literatures,reporting a total of 133 children with HLCS deficiency caused by HLCS gene mutation.Common clinical manifestations included metabolic acidosis,skin lesions,vomiting,feeding difficulties,dyspnea,diarrhea,and neurological symptoms,etc.Conclusions Blood amino acid and acylcarnitine profiles,urine organic acid analysis,and gene testing are helpful for the diagnosis of HLCS deficiency.Timely biotin supplementation leads to a good prognosis.The mutation of HLCS gene is considered as the genetic etiology of HLCS deficiency in 3 children,among which the c.1892delT(p.L631X)mutation is a newly discovered mutation.

Objective To investigate the characteristics of changes in hepatitis B surface antigen(HBsAg),hepatitis B virus(HBV)deoxyribonucleic acid(DNA),and alanine aminotransferase(ALT)levels following the cessation of nucleos(t)ide analogues(NAs)therapy in hepatitis B e antigen(HBeAg)-negative chronic hepatitis B(CHB)patients with baseline HBsAg levels<1000 IU/ml.Methods This retrospective cohort study analyzed 73 HBeAg-negative CHB patients treated at the Fifth Medical Centre of Chinese PLA General Hospital from January 2020 to June 2023.Patients were divided into 3 groups according to baseline HBsAg level and discontinuation strategy:HBsAg-negative discontinuation group(n=14),HBsAg-positive discontinuation group(n=25),and HBsAg-positive continuation group(n=34).All patients were followed for 48 weeks.Baseline clinical characteristics and changes in virological and hepatic biochemical indicators during follow-up were compared among the 3 groups.Univariate logistic regression analysis was performed to assess the correlation between clinical indicators and HBV DNA reappearance in HBsAg-positive discontinuation group,and between clinical indicators and HBsAg decline>0.5 log IU/ml in this group.Results There were no significant differences in the baseline levels of gender,age,albumin,and total bilirubin among the 3 groups(P>0.05).The baseline direct bilirubin level was significantly higher in HBsAg-positive discontinuation group than that in other groups(P<0.05),while the lymphocyte counts were significantly higher in HBsAg-negative discontinuation group(P<0.05).During the 48-week follow-up period,the HBV DNA reappearance rate in HBsAg-positive discontinuation group(72.0%)was significantly higher than that in other groups(P<0.001).There was no significant difference in the incidence of ALT elevation among the three groups(P=0.260).The proportion of patients with HBsAg decline>0.5 log IU/ml in HBsAg-positive discontinuation group(24.0%)was significantly higher than that in HBsAg-positive continuation group(5.9%,P<0.05).The proportion of patients with HBsAg increase>0.5 log IU/ml in HBsAg-positive discontinuation group(12.0%)was also significantly higher than that in HBsAg-positive continuation group(0%,P<0.05).Univariate logistic regression analysis revealed no significant association between the analyzed clinical indicators and HBsAg decline(P>0.05).Conclusions Discontinuation of NAs therapy in HBsAg-negative patients demonstrates high safety,with sustained HBsAg negativity post-cessation and low risks of viral relapse and liver function abnormalities.For HBsAg-positive patients,discontinuation may promote HBsAg decline in some individuals but is associated with risks of HBV DNA reappearance and HBsAg elevation.The decision to discontinue therapy should be comprehensively evaluated based on patients'baseline HBsAg levels and clinical characteristics.

Objective To rvaluate the therapeutic efficacy of balloon-dilatation covered stents in the treatment of renal artery stenosis(RAS).Methods The clinical data of 30 patients with RAS,who received intravascular ultrasonography(IVUS)-guided LifeStream balloon-dilatation covered stent implantation at the Affiliated Central Hospital of Dalian University of Technology(Dalian Municipal Central Hospital)of China from August 2022 to December 2023,were retrospectively analyzed.The various parameters of the lumen and the stent were measured,and the performance of the stent was evaluated.Results The minimum original blood vessel diameter below the base of the stenotic segment plaque was 5.40(5.17,5.80)mm and the maximum blood vessel diameter was 6.20(5.80,6.93)mm,which became 6.00(5.80,6.00)mm and 7.90(6.00,8.00)mm respectively after stent release,the differences were statistically significant(both P＜0.05).Before stent release the luminal eccentricity index was(14.72±9.37)％,which was(1.54±9.16)％after stent release,the difference was statistically significant P＜0.05).The instant stent symmetry after stent release was(82.69±14.61)％,and the stent expansion factor was(99.81±10.70)％.Ideal narrow coverage rate was obtained.During operation,poor stent adhesion occurred in 2 patients and renal artery rupture with bleeding occurred in one patient,which were solved after immediate re-expansion treatment.Spearman's correlation analysis showed that stent symmetry,stent expansion factor,and stent eccentricity index did not linearly correlate with the lumen cross-sectional area stenosis rate and the plaque eccentricity index(all P＞0.05).Conclusion For the treatment of RAS,the LifeStream balloon-dilatation covered stent is clinically safe,feasible,and effective with satisfactory immediate clinical outcomes.

Objective To distinguish Cremastra appendiculata(D.Don)Makino,Pleione yunnanensis Rolfe and Pleione bulbocodioides,and its easily confusing products Oreorchis patens and Iphigenia indica Kunth using the ITS sequence in DNA barcodes;To explore the genetic diversity of Cremastra appendiculata germplasm resources.Methods Three different original Cremastra appendiculata,Pleione yunnanensis Rolfe and Pleione bulbocodioides,and their easily confusing products Cremastrae Pseudobulbus of Oreorchis patens and Iphigenia indica Kunth were selected as the research objects,and the genomic DNA of the above samples were extracted by the modified CTAB method,and then the ITS sequences were amplified,sequenced and spliced by PCR technology.The Kimura 2-Parameter(K2P)model was used to calculate the genetic distance,and the phylogenetic tree was constructed with the help of neighbour joining method(NJ)for genetic relationship analysis.Results Except for the Iphigenia indica Kunth species that were not found during the BLAST search,the BLAST comparison results of the other samples were higher than 95%.At the same time,the results of phylogenetic tree showed that Cremastra appendiculata,Pleione yunnanensis Rolfe and Pleione bulbocodioides were clustered into one branch,respectively,and the easily confusing products were also respectively clustered into one branch.Conclusion The ITS sequence in DNA barcodes can be used to accurately distinguish Cremastra appendiculata,Pleione yunnanensis Rolfe and Pleione bulbocodioides,and its easily confusing products Oreorchis patens and Iphigenia indica Kunth.