OBJECTIVE To formulate Guidelines for the standardized implementation of pharmacist-managed clinics （ 2026 edition ） in response to the challenges faced by such clinics in China， including uneven development， large discrepancies in service specifications， insufficient patient awareness， and limited medical insurance coverage. METHODS Led by the Pharmaceutical Affairs Professional Committee of the Chinese Hospital Association， the Evidence-based Pharmacy Professional Committee of the Chinese Pharmaceutical Association， and the Hospital Pharmacy Professional Committee of the Cross-strait Medical and Health Exchange Association， a total of 19 domestic hospital pharmacy experts were organized. Through a systematic review of national policies and literature research， current practical experience was summarized. Consensus on the contents of the guidelines was reached after in-depth discussions. RESULTS &CONCLUSIONS The guidelines covered five sections： definition and connotation of pharmacist-managed clinics， establishment requirements， implementation and management， post competency， and practical research. Firstly， the definition and connotation included three operational forms of pharmacist-managed clinics （independent mode， physician-pharmacist joint mode， and online pharmacist-managed clinic mode） and classified service modes （specialty-specific， drug-specific， and disease-specific pharmacist-managed clinics）. The establishment requirements were further refined， covering system construction （pharmaceutical service management system， quality control and assessment mechanism）， personnel qualifications （professional credentials， continuing education and professional training， etc）， service recipients， as well as service venues and facilities. Subsequently， the implementation and management of pharmacist-managed clinics were proposed， involving service procedures， intervention measures， documentation and records， patient education and follow-up， humanistic care， as well as risk management and quality control. Finally， post competency encompassed the competency requirements for pharmacists providing services in pharmacist-managed clinics， as well as the suggestions on teaching methods； practical research encouraged the conduct of high-quality pharmaceutical practice in the setting of pharmacist-managed clinics. The guidelines provide valuable guidance for the standardized implementation of pharmacist-managed clinics in China in terms of establishment， management， teaching， and research， fill the guideline gap in this field， and can promote the high-quality development of pharmacist-managed clinics.

BACKGROUND:Human periodontal ligament stem cells are potential functional cells for periodontal tissue engineering.However,long-term in vitro culture may lead to reduced stemness and replicative senescence of periodontal ligament stem cells,which may impair the therapeutic effect of human periodontal ligament stem cells. OBJECTIVE:To investigate the effect of oxymatrine on the stemness maintenance and osteogenic differentiation of periodontal ligament stem cells in vitro,and to explore the potential mechanism. METHODS:Periodontal ligament stem cells were isolated from human periodontal ligament tissues by tissue explant enzyme digestion and cultured.The surface markers of mesenchymal cells were identified by flow cytometry.Periodontal ligament stem cells were incubated with 0,2.5,5,and 10 μg/mL oxymatrine.The effect of oxymatrine on the proliferation activity of periodontal ligament stem cells was detected by CCK8 assay.The appropriate drug concentration for subsequent experiments was screened.Western blot assay was used to detect the expression of stem cell non-specific proteins SOX2 and OCT4 in periodontal ligament stem cells.qRT-PCR and western blot assay were used to detect the expression levels of related osteogenic genes and proteins in periodontal ligament stem cells. RESULTS AND CONCLUSION:(1)The results of CCK8 assay showed that 2.5 μg/mL oxymatrine significantly enhanced the proliferative activity of periodontal stem cells,and the subsequent experiment selected 2.5 μg/mL oxymatrine to intervene.(2)Compared with the blank control group,the protein expression level of SOX2,a stem marker of periodontal ligament stem cells in the oxymatrine group did not change significantly(P>0.05),and the expression of OCT4 was significantly up-regulated(P<0.05).(3)Compared with the osteogenic induction group,the osteogenic genes ALP,RUNX2 mRNA expression and their osteogenic associated protein ALP protein expression of periodontal ligament stem cells were significantly down-regulated in the oxymatrine+osteogenic induction group(P<0.05).(4)The oxymatrine up-regulated the expression of stemness markers of periodontal ligament stem cells and inhibited the bone differentiation of periodontal ligament stem cells,and the results of high-throughput sequencing showed that it may be associated with WNT2,WNT16,COMP,and BMP6.

Objective:To evaluate the safety and efficacy of the TiRobot assisted screw placement in patients with lumbar degenerative diseases.Methods:The clinical data of 165 patients with lumbar degenerative diseases from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyze, and all patients were treated with posterior lumbar decompression and instrumentation. Among them, 46 patients were used the TiRobot assisted screw placement during surgery (robotic-assisted group), and 119 patients underwent freehand screw placement by C-arm X-ray machine fluoroscopy (freehand group). The operation time, intraoperative blood loss, complication and skelalgia visual analogue scale (VAS), Oswestry disability index (ODI) before and after operation were recorded. The accuracy of screw placement and rate of proximal facet joint violation were compared between two groups.Results:There were no statistical difference in operation time, intraoperative blood loss and incidence of complication between two groups ( P>0.05). In the two groups, the 3 d VAS and ODI after operation were significantly lower than those before operation, robot-assisted group: (3.33 ± 1.40) scores vs. (6.54 ± 2.00) scores and (16.96 ± 8.03) scores vs. (43.09 ± 5.48) scores; freehand group: (3.56 ± 1.29) scores vs. (6.55 ± 1.65) scores and (18.89 ± 6.74) scores vs. (44.91 ± 4.96) scores, and there were statistical differences ( P<0.01); there were no statistical difference in VAS and ODI before operation and 3 d after operation between two groups ( P>0.05). A total of 234 screws were implanted in robot-assisted group, and 590 screws were implanted in freehand group. The accuracy of screw placement in robot-assisted group was significantly higher than that in freehand group: 80.77% (189/234) vs. 74.58% (440/590), the rate of proximal facet joint violation was significantly lower than that in freehand group: 2.56% (6/234) vs. 7.29% (43/590), and there were statistical differences ( χ2 = 3.56 and 6.68, P<0.05). Conclusions:The TiRobot assisted screw placement for lumbar degenerative diseases is safe and effective. Compared to freehand technique, the TiRobot assisted method demonstrates higher screw placement accuracy and a lower rate of proximal facet joint violation.

Objective To explore the value of 18F-flortaucipir tau PET combined with APOE ε4 genotype status for diagnosing mild cognitive impairment(MCI).Methods A total of 213 MCI patients(MCI group)and 402 healthy controls(HC group)were selected from Alzheimer's disease neuroimaging initiative(ADNI)database.The neuropsychological information,APOE ε4 gene carrier status,tau PET and high-resolution structural MRI data were recorded.The random forest algorithm was used to screen the most informative brain regions of tau PET for diagnosing MCI,and the efficacy of tau PET for distinguishing MCI with or without APOE ε4 gene and HC were compared.Results Amygdala,parahippocampal gyrus,entorhinal cortex,posterior cingulate gyrus,inferior temporal gyrus,fusiform gyrus and middle temporal gyrus in turn were the important brain regions of tau PET for diagnosing MCI.The accuracy and the area under the curve(AUC)of tau PET standardized uptake value ratio(SUVR)model for identifying MCI with APOE ε4 gene and HC was 86.68％and 0.784,respectively,both higher than those for identifying MCI and HC,as well as MCI without APOE e4 gene and HC(with accuracy of 70.57％and 75.05％,and AUC of 0.711 and 0.609).Conclusion 18F-flortaucipir tau PET SUVR model established based on amygdala,parahippocampal gyrus,entorhinal cortex,posterior cingulate gyrus,inferior temporal gyrus,fusiform gyrus and middle temporal gyrus could be used to diagnosing MCI.Combining with APOE ε4 gene could further improve its efficacy.

End-stage dilated cardiomyopathy belongs to the irreversible cardiac decompensation stage,and neither drugs nor cardiac resynchronization therapy can improve the symptoms of heart failure in patients.Orthotopic heart transplantation is a surgical procedure that involves removing the diseased heart of the recipient and implanting the donor heart in its original position.With the advancements in surgical transplantation techniques and immunosuppressive therapy,it has become an effective treatment for end-stage heart disease.Coronary artery disease after heart transplantation is one of the issues that need attention after heart transplantation.This article reports a 68-year-old male who suffered from recurrent heart failure and ventricular tachycardia due to"dilated cardiomyopathy"and underwent allogeneic orthotopic heart transplantation 5 years ago.The patient underwent coronary angiography and intravascular ultrasound examination under local anesthesia.This case has certain guiding significance for studying the progression of coronary artery disease in heart transplant patients.

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Aim To explore the mechanism of action of Guizhi Jia Gegen decoction(GGD)in treating pneu-monia-enteritis induced by H1N1 influenza virus infec-tion in a mouse model,using network pharmacology and molecular docking techniques,followed by in vivo verification.Methods A pneumonia-enteritis mouse model was established,and the intervention effects of GGD on the model mice were evaluated using indica-tors such as body weight,rectal temperature,lung in-dex,colon length,H1N1 M gene expression,relative mRNA expression levels of inflammatory cytokines,and pathological sections of the lung and intestine.The targets of the blood-absorbed components of GGD were identified using the Swiss Target Prediction platform,and the disease targets were retrieved from the Gene-Cards platform.The intersecting targets were analyzed through PPI network analysis using the STRING data-base to identify core targets.GO analysis and KEGG pathway enrichment analysis were performed using the Metascape database.RT-qPCR was employed to vali-date the core targets and pathways.Molecular docking was conducted using AutoDock Tools software to verify the interactions between blood-absorbed components and key targets.Results GGD demonstrated signifi-cant therapeutic effects on the pneumonia-enteritis mouse model.The results of network pharmacology in-dicated that the therapeutic effects of GGD were strong-ly associated with targets such as TNF,ALB,PTGS2,MMP9,EGFR,ESR1,SRC,HSP90AA1,PPARG and MMP2.RT-qPCR results indicated that GGD could intervene in pneumonia-enteritis by regulating the targets TNF,ALB,EGFR and the related targets of the NF-κB pathway.Molecular docking results re-vealed that blood-absorbed components such as puerar-in and liquiritin could stably bind to TNF,ALB and EGFR.Conclusion Components such as puerarin and liquiritin in GGD may exert therapeutic effects on pneumonia-enteritis induced by H1N1 influenza virus infection by acting on targets such as TNF,ALB and EGFR.

Objective To observe the morphology of the superficial,middle,and deep layers of the masseter muscle and related bony structures in the lateral facial region of adults through gross anatomy,and to probe into the effects of these muscle layers on the bony structures of the lateral facial region.Methods The bilateral masseter muscles of 12 adult cadavers were exposed,and the superficial,middle,and deep layers were separated and measured for muscle length,tendon length,and muscle belly length.After the masseter muscles were stripped,the total thickness was measured,and the mandible and zygomatic arch were exposed to measure the angle of the mandibular angle,thickness of the zygomatic arch,and width of the zygomatic arch.Observations were made of the masseter tuberosities,and statistical analysis was conducted on their interrelations.Results The zygomatic arch thickness was positively correlated with the length of superficial,middle and deep masseter muscles and the length of superficial and middle masseter belly(r superficial masseter length=0.624,r middle masseter length=0.787,r deep masseter length=0.423,r superficial masseter belly length=0.493,r middle masseter belly length=0.548).The width of the zygomatic arch was positively correlated with the lengths of the superficial and middle muscle layers and the middle muscle belly length(r superficial masseter length=0.527,r middle masseter length=0.521,r middle masseterbelly length=0.437).The angle of the mandibular angle was only negatively correlated with the middle muscle belly length(r=-0.422).The tuberosities of the superficial and middle masseter muscles were not affected by the corresponding muscle layers;However,the tuberosity of the deep masseter was negatively correlated with the length of the deep muscle and the length of the deep tendon(r deep masseter length=-0.543,r deep masseter tendon length=-0.443).Conclusion In the masseter muscle layers of Chinese individuals,the superficial and middle layers have the most significant impact on the bony structures structures of the lateral facial region.These findings are of guiding significance for the remodeling of structures in the lateral facial region.

Objective:To investigate the application of the conjugate gradient (CG) algorithm to treatment plan optimization for intensity-modulated brachytherapy (IMBT).Methods:The general Monte Carlo software TOPAS was utilized to simulate the 192Ir source of IMBT, and the unit dose contribution matrix was calculated. An objective function was established using the weighted least squares method and was solved using the CG algorithm to achieve optimized IMBT treatment plans. The optimization was validated using five clinical cervical cancer cases under modulation width 60°. The dose distributions of IMBT treatment plans under 45°, 60°, 90°, 120°, and 180° modulation widths were compared using the Wilcoxon test to determine the optimal IMBT treatment plan for cervical cancer treatment. Results:The CG algorithm successfully optimized IMBT treatment plans under modulation width 60° for five cases within 22.2 s on average. On the premise of sufficient target dose coverage, the average D2 cm 3 values of the bladder and rectum in IMBT treatment plans were 3.66 and 1.97 Gy, respectively, representing reductions of 0.54 and 0.69 Gy compared to traditional brachytherapy plans. For the five modulation widths, the D90% values of all IMBT treatment plans reached 6 Gy, without statistically significant differences ( P > 0.05). The average D2 cm 3 values of the bladder in IMBT treatment plans were significantly lower than those in the traditional brachytherapy plans( P<0.05), with modulation width 60° associated with the greatest reduction of 0.61 Gy. In contrast, the average D2 cm 3 values of the rectum under 45°, 60°, and 90° modulation widths decreased by 0.63, 0.54, and 0.45 Gy, respectively, compared to traditional plans, with statistically significant differences( P<0.05). Conclusions:The CG method enables rapid achievement of optimized IMBT treatment plans that meet clinical requirements, and modulation width 60° contributes to valid dosimetric optimization. This study can serve as a guide for the clinical implementation of IMBT.

Objective To explore the clinical effect of 3D-printed interbody fusion cage applied in anterior cervical decompression and bone graft fusion for the treatment of cervical spondylotic myelopathy.Methods A total of 100 patients with cervical spondylotic myelopathy who underwent anterior cervical fusion surgery in our hospital from June 2020 to June 2023 were selected as the research subjects,they were randomly divided into the 3D group and the control group according to the random number table method,with 50 cases in each group.Patients in the 3D group were implanted with a 3D-printed interbody fusion cage which was made of microporous metal materials,while patients in the control group were implanted with intervertebral fusion cage which was made of polyetheretherketone material.The surgery-related indicators,cervical imaging parameters,cervical spinal cord function,cervical axial function and surgical complications of patients between the two groups were compared.Results There was no statistically significant difference in the operation time,intraoperative blood loss or length of hospital stay of patients between the two groups(P>0.05).The height of the cervical fusion segments and the Cobb angle of the fusion segments of patients in both groups at each time point after the operation were significantly increased compared with those before the operation(P<0.05).The height of the cervical fusion segments and the Cobb angle of the fusion segments of patients 1 month,3 months,and 6 months after the operation in the 3D group were all greater than those in the control group(P>0.05).The subjective symptom score and the total score of the Japanese orthopaedic association(JOA)of patients 6 months after the operation in the 3D group were higher than those in the control group(P<0.05).The cervical axial function of patients 6 months after the operation in the 3D group was better than that in the control group(P<0.05).The incidence of surgical complications in the 3D group was lower than that in the control group(P<0.05).Conclusion The use of 3D-printed interbody fusion cage during the anterior cervical decompression and bone graft fusion for patients with cervical spondylotic myelopathy can significantly improve the clinical symptoms of patients,achieve better cervical axial function,and have fewer complications.