OBJECTIVE: To investigate the biomechanical characteristics of retrograde tibial nailing (RTN) and distal tibial L-shaped plating in the internal fixation of distal tibial fractures. METHODS: Fourteen fresh adult tibia specimens were selected, comprising 7 males and 7 females aged from 34 to 55 years old. The specimens were randomly divided into experimental group and control group by numerical table method with 7 specimens in each group. RTN was used for internal fixation of distal tibial fractures in the experimental group, and L-shaped plate was used for internal fixation of distal tibial fractures in the control group. The axial compression properties of the two groups of specimens were tested under the pressure of 100, 200, 300, 400, and 500 N after operation, and torsional resistance at torque levels of 1.0, 2.0, 3.0, 4.0, 5.0 N·m. The anti-fatigue performance of the specimens was tested at 500 N pressure for 3 000 and 10 000 cycles. X-ray fluoroscopy was performed to observe whether the the internal fixator was deformed and whether the screw was loosened or broken. RESULTS: When the pressure was 400 N and 500 N, the axial compression displacement of the experimental group was (1.11±0.06) mm and (1.24±0.05) mm, which were smaller than those of the control group (1.21±0.08) mm and (1.37±0.11) mm, and the differences were statistically signific (P<0.05). Under the pressure of 500 N, the axial compression stiffness of the experimental group was (389.24±17.79) N·mm^-1, which was significantly higher than that of the control group (362.37±14.44) N·mm^-1(P<0.05). When the torque was 4 and 5 N·m, the torsion angles of the experimental group were (2.97±0.23) ° and (3.41±0.17) °, which were smaller than those of the control group (3.31±0.28) ° and (3.76±0.20) °, and the differences were statistically significant (P<0.05). When the torque was 5 N·m, the torsional stiffness of the experimental group was (1.48±0.07) N·m per degree, which was higher than that of the control group (1.36±0.06) N·m per degree, and the difference was statistically significant (P<0.05). For the intragroup comparison of fatigue resistance, the differences in axial compression displacement between the two groups were not statistically significant at 3 000 and 10 000 cycles (all P>0.05). When 3 000 times and 10 000 times of compression, the axial compression displacement of the experimental group was (1.38±0.08), (1.43±0.07) mm, which was smaller than that of the control group (1.51±0.10), (1.54±0.08) mm, the differences were statistically significant (P<0.05). In the experimental group, no screw loosening, fracture or internal fixation deformation was found, while in the control group, locking screw loosening occurred in 2 models after 10 000 pressures. CONCLUSION The biomechanical performance of RTN is obviously better than that of the distal tibial L-shaped plate, which provides biomechanical data support for the clinical application of RTN.
Humans ; Female ; Male ; Adult ; Tibial Fractures/physiopathology* ; Middle Aged ; Biomechanical Phenomena ; Bone Plates ; Fracture Fixation, Internal/instrumentation* ; Bone Nails ; Tibia/surgery*

OBJECTIVE: To explore the clinical efficacy of conventional transforaminal endoscopic technique and I See transforaminal endoscopic technique in the treatment of recurrent L₅S₁ lumbar disc herniation with high iliac crest. METHODS: A total of 36 patients with recurrent L5S1 lumbar disc herniation with high iliac crest after posterior small-incision discectomy, admitted from May 2016 to May 2023, were selected. They were divided into the conventional transforaminal endoscopy group and the I See transforaminal endoscopy group according to the different transforaminal endoscopic techniques adopted, and all patients in both groups underwent lateral transforaminal spinal canal decompression and discectomy. There were 18 patients in the conventional transforaminal endoscopy group, including 11 males and 7 females, with an age of (52.24±6.68) years;the I See transforaminal endoscopy group also had 18 patients, including 12 males and 6 females, with an age of (50.75±7.79) years. The perioperative indicators (operation time, number of intraoperative radiographs, and length of hospital stay) were compared between two groups. The clinical efficacy was evaluated using the visual analogue scale(VAS) for pain, the Japanese Orthopaedic Association(JOA) low back pain score, and the modified MacNab criteria before and after surgery. RESULTS: All patients achieved gradeⅠincision healing, with no infection cases. The operation time of the I See group was (64.25±16.67) minutes, which was significantly shorter than that of the conventional transforaminal endoscopy group (89.11±17.24) minutes, and the difference was statistically significant(P<0.05). The number of intraoperative radiographs in the I See group was (5.20±2.29) times, which was significantly less than that in the conventional transforaminal endoscopy group(19.16±3.68) times, and the difference was statistically significant(P<0.05). The VAS and total JOA scores of both groups at the 3rd day, the 3rd month after surgery, and the last follow-up were significantly lower than those before surgery, with statistically significant differences(P<0.05);however, there were no statistically significant differences in VAS and total JOA scores between two groups at the 3rd day, the 3rd month after surgery, and the last follow-up (P>0.05). According to the modified MacNab criteria for efficacy evaluation:in the conventional transforaminal endoscopy group, 14 cases were excellent and 4 cases were good;in the I See transforaminal endoscopy group, 15 cases were excellent and 3 cases were good;there was no statistically significant difference in efficacy between two groups(Z=0.177, P=0.674). CONCLUSION Both transforaminal endoscopic techniques have good clinical effects in the treatment of recurrent L₅S₁ lumbar disc herniation with high iliac crest, resulting in significant improvement of postoperative symptoms, and they are safe, reliable, and minimally invasive surgical methods. Compared with the conventional transforaminal endoscopy, the I See transforaminal endoscopic technique has shorter operation time and fewer intraoperative radiographs, so it is generally the first choice.
Humans ; Male ; Female ; Intervertebral Disc Displacement/surgery* ; Endoscopy/methods* ; Middle Aged ; Lumbar Vertebrae/surgery* ; Ilium/surgery* ; Adult ; Diskectomy/methods*

This study was aimed at preliminarily investigating the genetic and antimicrobial resistance characteristics of Salmonella Alachua isolates through whole-genome analyses.Five Salmonella Alachua isolates from various sources(both hu-man and non-human)were collected and identified.Phenotype and serotype verification,antimicrobial susceptibility testing,and whole-genome sequencing were performed.Virulence genes,antimicrobial resistance genes,and plasmid replicons were predicted according to globally available Salmonella Alachua genomic data.A phylogenetic tree was constructed to explore the genetic background.The first report of Salmonella Alachua in China emerged in Shanghai in 2015,and patients presented pri-marily with diarrhea.The isolates have been found predominantly in the eastern and southern coastal regions.Among the five i-solates analyzed,four belonged to sequence type(ST)2061,and one belonged to ST1298.All isolates were susceptible to most commonly used clinical antibiotics.Whole-genome analyses revealed that two ST2061 strains carried the blaKPC-2 gene,and one ST1298 strain carried the fosA7 gene.Phylogenetic analysis of global Salmonella Alachua populations indicated that the ST2061 clone belonged to the C1 clade,which was closely related to strains from the UK,whereas the ST1298 clone was found in the C4 clade,a globally disseminated fosA 7-positive lineage.This study provides initial insights into the genetic and antimi-crobial resistance characteristics of Salmonella Alachua in China,highlighting the presence of strains carrying blaKPC-2 and fo-sA7 genes.These findings may provide a reference for future large-scale molecular epidemiological surveillance and source-trac-ing efforts,and they underscore the importance of enhanced resistance monitoring for Salmonella Alachua.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

AIM:To optimize the clinical dosage and administration regimen of a novel long-acting injectable aripiprazole microsphere(LZMT05)using plasma concentration data from two clinical trials.METHODS:Plasma concentrations were collected from 196 schizophrenia patients administered LZMT05,and a population pharmacokinetic(Pop-PK)model was developed.The therapeutic window was defined as the steady-state trough-to-peak concentration range(94.0-534 ng/mL)of oral ar-ipiprazole.Multiple clinical scenarios were simulat-ed to identify the optimal regimen.RESULTS:A one-compartment model with dual first-order ab-sorption and first-order elimination characterized LZMT05 pharmacokinetics.Covariates like sex and CYP2D6 genotype were integrated into the final model.Simulations demonstrated that switching from 10 mg oral aripiprazole to 350 mg LZMT05 ev-ery 4 weeks sustained concentrations within the therapeutic window with minimal peak-to-trough fluctuations.CONCLUSION:The PopPK-guided opti-mized LZMT05 regimen maintained drug exposure within the therapeutic window,suggesting favor-able efficacy and safety.

This study was aimed at establishing a method of ultra-fast quantitative PCR for Brucella detection.We used an exogenous recombinant plasmid as the internal reference and targeted the T4SS secretion system,an important Brucella viru-lence factor,to design specific primers and probes.The sensitivity,specificity,and repeatability of this method were evaluated,and a standard curve was constructed.The coincidence rate of detection findings with this method versus quantitative PCR was determined.This method markedly decreased the detection time to only 10 minutes.The standard curve demonstrated a good linear relationship(Y=-3.410 7x+38.357,R2=0.998 5)with a low minimum detection limit of 10 copies/μL.The method exhibited good specificity and did not specifically amplify several common clinical bacteria other than Brucella.The de-tection of three concentrations of positive plasmids yielded coefficients of variation(CVs)of 0.20％to 0.91％,thus demonstra-ting the method's excellent repeatability.Furthermore,140 clinical samples were analyzed concurrently with the fluorescence PCR method,which yielded a 100％compliance rate and consistent results.Our findings indicated that the Brucella ultra-fast quantitative PCR was ultrafast;had high sensitivity,high specificity,and good specificity;and can be used for the clinical de-tection of Brucella and emergency investigation of epidemics.Therefore,this method is valuable for the early diagnosis of Bru-cella.

Thoracolumbar spine fracture often leads to severe pain, functional impairments, and neurological deficits, for which open reduction and internal fixation can effectively restore the spinal structural stability. Open decompression and reduction with internal fixation can help relieve spinal cord compression and improve spinal function in cases of concomitant cord injury. Although spinal stability can be restored through surgery, patients often face chronic pain and functional impairments postoperatively. A postoperative rehabilitation program is critical in optimizing therapeutic outcomes, reducing complications, and minimizing the risk of secondary injuries. However, current rehabilitation methods, such as physical therapy, functional training, and pain management, are confronted with problems in clinical practice, including significant variation in efficacy, poor patient adherence, and prolonged rehabilitation period. There is an urgent need for a unified rehabilitation strategy to address these problems. To this end, the Spinal Trauma Group of the Orthopedic Physicians Branch of the Chinese Medical Association and the Spine Health Professional Committee of the Chinese Human Health Technology Promotion Association organized experts from relevant fields to formulate Evidence-based guidelines for rehabilitation treatment after internal fixation of thoracolumbar spine fracture in adults ( version 2025) by integrating evidences from clinical researches and advanced rehabilitation concepts at home and abroad. A total number of 14 recommendations concerning the rehabilitation treatment with multimodal analgesia, psychological intervention, deep vein thrombosis prevention, core muscle and extremity exercise, appropriate use of braces, early weight-bearing, device-aided rehabilitation exercise, neuroregulatory therapy, rehabilitation team were put forward, aiming to standardize the post-operative rehabilitation process following internal fixation, promote the functional recovery, and enhance patients′ quality of life.

Acute symptomatic osteoporotic thoracolumbar compression fracture (ASOTLF) can lead to chronic low back pain, kyphosis deformity, pulmonary dysfunction, loss of mobility, and even life-threatening complications. Vertebral augmentation is currently the mainstream treatment method for this condition. In 2019, the Editorial Board of Chinese Journal of Trauma and the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association collaboratively led the development of Clinical guideline for vertebral augmentation for acute symptomatic osteoporotic thoracolumbar compression fractures. Six years later, with advances in clinical diagnosis and treatment techniques as well as accumulating evidence in related fields, the 2019 guideline requires updating. To this end, the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association, the Spinal Health Professional Committee of China Human Health Science and Technology Promotion Association, and the Minimally Invasive Orthopedics Professional Committee of Shaanxi Medical Doctor Association have organized experts in the field to develop the Clinical guideline for vertebral augmentation of acute symptomatic osteoporotic thoracolumbar compression fractures ( version 2025) , based on the latest evidence-based medical researches. This guideline incorporates 3 recommendations retained from the 2019 version with updated strength of evidence, along with 12 new recommendations. It provides recommendations from six aspects of diagnosis, pain management, treatment option selection, prevention of postoperative complications, anti-osteoporosis therapy, and postoperative rehabilitation, aiming to provide a reference for standard treatment of vertebral augmentation for ASOTLF in hospitals at all levels.