Objective: To understand the subjective and objective comfort evaluations of students from different age groups on desks and chairs, so as to provide reference for standardized allocation and use of desks and chairs. Methods: From January to April 2024, a total of 2 446 students were selected from 26 schools in 13 districts (counties/cities) in Shanghai, Tianjin, and Wuxi from Jiangsu Province by using cluster random method, including students in kindergartens, primary schools, junior high schools,senior high schools, colleges and universities. Standardized procedures were used to measure the height and weight of participants, and the matching desks and chairs models were selected according to the height. The subjective comfort of students on matching desks and chairs was investigated, and their objective comfort was evaluated by using a self designed questionnaire. The χ 2 test was used to analyze the differences of subjective perception and objective evaluation in comfort between different types of desks and chairs. Results: About 84.1% of the students subjectively thought that large desks and small chairs were very comfortable or relatively comfortable, followed by large desks and chairs (75.7%), and the proportion of small desks and chairs was the lowest among the three types (46.2%), and the difference was statistically significant ( χ 2=722.46, P <0.01). The reporting rates of primary school, junior high school and senior high school students who subjectively considered large desks and chairs to be very comfortable/relatively comfortable were higher than that of other types of desks and chairs, and the differences were statistically significant ( χ 2=297.49, 252.82, 343.67, P <0.01). However, there was no significant difference in the subjective comfort evaluation of different types of desks and chairs among kindergarten children ( χ 2=3.21, P >0.05), and 66.3% of the students in colleges and universities felt very comfortable/relatively comfortable when they used the matching standard desks and chairs. The objective evaluation results of the comfort for the three types of desks and chairs were consistent with the subjective evaluation, but the proportions of the objective evaluation as very comfortable/relatively comfortable were higher than that of the subjective evaluation ( χ 2=20.76- 813.47, P <0.01). Conclusions Large desks and chairs, as well as large desks with small chairs are perceived comfortable, while small desks and chairs are perceived less comfortable. It is recommended to match the large desks and chairs or large desks and small chairs that are suitable for them according to the "standard", to promote physical and mental health of students.

ObjectiveThe rapid advancement of bioanalytical technologies has heightened the demand for high-throughput, label-free, and real-time cellular analysis. Electrochemical impedance spectroscopy (EIS) operating in the GHz frequency range (GHz-EIS) has emerged as a promising tool for characterizing cell suspensions due to its ability to rapidly and non-invasively capture the dielectric properties of cells and their microenvironment. Although GHz-EIS enables rapid and label-free detection of cell suspensions, significant challenges remain in interpreting GHz impedance data for complex samples, limiting the broader application of this technique in cellular research. To address these challenges, this study presents a novel method that integrates GHz-EIS with deep learning algorithms, aiming to improve the precision of cell suspension concentration identification and quantification. This method provides a more efficient and accurate solution for the analysis of GHz impedance data. MethodsThe proposed method comprises two key components: dielectric property dataset construction and backpropagation (BP) neural network modeling. Yeast cell suspensions at varying concentrations were prepared and separately introduced into a coaxial sensor for impedance measurement. The dielectric properties of these suspensions were extracted using a GHz-EIS dielectric property extraction method applied to the measured impedance data. A dielectric properties dataset incorporating concentration labels was subsequently established and divided into training and testing subsets. A BP neural network model employing specific activation functions (ReLU and Leaky ReLU) was then designed. The model was trained and tested using the constructed dataset, and optimal model parameters were obtained through this process. This BP neural network enables automated extraction and analytical processing of dielectric properties, facilitating precise recognition of cell suspension concentrations through data-driven training. ResultsThrough comparative analysis with conventional centrifugal methods, the recognized concentration values of cell suspensions showed high consistency, with relative errors consistently below 5%. Notably, high-concentration samples exhibited even smaller deviations, further validating the precision and reliability of the proposed methodology. To benchmark the recognition performance against different algorithms, two typical approaches—support vector machines (SVM) and K-nearest neighbor (KNN)—were selected for comparison. The proposed method demonstrated superior performance in quantifying cell concentrations. Specifically, the BP neural network achieved a mean absolute percentage error (MAPE) of 2.06% and an R² value of 0.997 across the entire concentration range, demonstrating both high predictive accuracy and excellent model fit. ConclusionThis study demonstrates that the proposed method enables accurate and rapid determination of unknown sample concentrations. By combining GHz-EIS with BP neural network algorithms, efficient identification of cell concentrations is achieved, laying the foundation for the development of a convenient online cell analysis platform and showing significant application prospects. Compared to typical recognition approaches, the proposed method exhibits superior capabilities in recognizing cell suspension concentrations. Furthermore, this methodology not only accelerates research in cell biology and precision medicine but also paves the way for future EIS biosensors capable of intelligent, adaptive analysis in dynamic biological research.

ObjectiveTo identify the prototypical components and metabolites absorbed into blood and cerebrospinal fluid of Schisandrae Chinensis Fructus（SCF） based on sequential metabolism combined with liquid chromatography-mass spectrometry. MethodBlood and cerebrospinal fluid samples of integrated metabolism， intestinal metabolism and hepatic metabolism were collected from male SD rats after gavage and in situ intestinal perfusion administration， and ultra-performance liquid chromatography-quadrupole/electrostatic field orbitrap high-resolution mass spectrometry（UPLC Q-Exactive Orbitrap MS） was used to analyze and compare the differences in the spectra of SCF extract， blank plasma， administered plasma， blank cerebrospinal fluid and administered cerebrospinal fluid with ACQUITY UPLC BEH Shield RP18 column（2.1 mm×100 mm， 1.7 µm）， the mobile phase was acetonitrile（A）-0.1% formic acid aqueous solution（B） for gradient elution（0-7 min， 95%B； 7-12 min， 95%-35%B； 12-17 min， 35%-15%B； 17-20 min， 15%-12%B； 20-22 min， 12%-5%B； 22-23 min， 5%B； 23-25 min， 5%-95%B； 25-28 min， 95%B）. And heated electrospray ionization（HESI） was used with positive and negative ion modes， the scanning range was m/z 100-1 500. The prototypical constituents and their metabolites absorbed into blood and cerebrospinal fluid of SCF were identified according to the retention time， characteristic fragments， molecular formulae and the information of reference substances. ResultA total of 42 chemical components were identified in the extract of SCF， including lignans， flavonoids， amino acids， tannins， and others， of which lignans were the main ones. A total of 27 prototypical components and 14 metabolites were identified in plasma samples from different sites. A total of 15 prototypical components and 9 metabolites were identified in cerebrospinal fluid. The main metabolic reactions involved in the formation of metabolites were mainly demethylation， methylation， demethoxylation and hydroxylation. ConclusionThrough the systematic identification of the prototypical components and metabolites of SCF in rats， it provides data support for further better exploring the material basis of SCF in the treatment of central nervous system diseases.

Objective To evaluate the efficacy and safety of brexpiprazole in treating acute schizophrenia.Methods Patients with schizophrenia were randomly divided into treatment group and control group.The treatment group was given brexpiprozole 2-4 mg·d-1 orally and the control group was given aripiprazole 10-20 mg·d-1orally,both were treated for 6 weeks.Clinical efficacy of the two groups,the response rate at endpoint,the changes from baseline to endpoint of Positive and Negative Syndrome Scale(PANSS),Clinical Global Impression-Improvement(CGI-S),Personal and Social Performance scale(PSP),PANSS Positive syndrome subscale,PANSS negative syndrome subscale were compared.The incidence of treatment-related adverse events in two groups were compared.Results There were 184 patients in treatment group and 186 patients in control group.After treatment,the response rates of treatment group and control group were 79.50％(140 cases/184 cases)and 82.40％(150 cases/186 cases),the scores of CGI-I of treatment group and control group were(2.00±1.20)and(1.90±1.01),with no significant difference(all P＞0.05).From baseline to Week 6,the mean change of PANSS total score wese(-30.70±16.96)points in treatment group and(-32.20±17.00)points in control group,with no significant difference(P＞0.05).The changes of CGI-S scores in treatment group and control group were(-2.00±1.27)and(-1.90±1.22)points,PSP scores were(18.80±14.77)and(19.20±14.55)points,PANSS positive syndrome scores were(-10.30±5.93)and(-10.80±5.81)points,PANSS negative syndrome scores were(-6.80±5.98)and(-7.30±5.15)points,with no significant difference(P＞0.05).There was no significant difference in the incidence of treatment-related adverse events between the two group(69.00％vs.64.50％,P＞0.05).Conclusion The non-inferiority of Brexpiprazole to aripiprazole was established,with comparable efficacy and acceptability.

ObjectiveTo observe the clinical effectiveness and safety of Hewei Anshen Formula （和胃安神方） for stress-induced insomnia. MethodsA total of 104 male patients with stress-induced insomnia were randomly divided into a treatment group and a control group， with 52 cases in each group. The treatment group was given Hewei Anshen Formula once a day， while the control group was given zolpidem tartrate tablets 10 mg per time and once a day， and both groups were treated for 4 weeks. The Pittsburgh Sleep Quality Index （PSQI） was applied to evaluate sleep quality before and after treatment， Ford Insomnia Response to Stress Test （FIRST） was used to evaluate insomnia susceptibility， MOS 36-tem Short Form Health Survey （SF-36） ［which includes the domains of Physical Component Summary （PCS） and Mental Health Component Summary （MCS）， with the PCS including the General Health （GH）， Physical Functioning （PF）， Role Physical （RP）， and Body Pain （BP）， and the MCS including Role Emotional （RE）， Social Functioning （SF）， Vitality （VT）， Mental Health （MH）］ was used to evaluate the quality of life， and Fatigue Scale 14 （FS-14） ［including somatic fatigue and brain fatigue scores］ to evaluate the degree of fatigue， and the traditional Chinese medicine （TCM） syndrome scores using a self-developed TCM syndrome survey for insomnia. Clinical effectiveness and TCM syndrome improvement were determined after treatment. The occurrence of adverse events and adverse reactions was recorded during treatment. ResultsThe total effective rate of clinical effectiveness was 90.38% （41/52） in the treatment group and 80.77% （42/52） in the control group， and the difference between the two groups was not statistically significant （P＞0.05）. The total effective rate of TCM syndrome effectiveness in the treatment group was 80.77% （42/52）， which was higher than 44.23% （23/52） in the control group， and the difference was statistically significant （P＜0.01）. The TCM syndrome score， FIRST score， brain fatigue scores， brain fatigue score and total score of FS-14 score all reduced after treatment in both groups， and all scores were lower in the treatment group than those in the control group after treatment （P＜0.05）. All transformed scores of SF-36 scores were higher in both groups after treatment than before treatment in this group， and they were better than the control group in the four dimensions of PF， RP， VT， and MH （P＜0.05）. There were no adverse events and adverse reactions in the two groups. ConclusionHewei Anshen Formula can improve patients' sleep quality， effectively relieve clinical symptoms such as fatigue and pain， alleviate TCM syndromes， enhance the quality of life， reduce the susceptibility to insomnia， and shows good safety.

To establish a method for determining 26 inorganic elements in earthworm polypeptide and determine the elemental content in different batches of earthworm polypeptide, microwave digestion method was used to pre-treat the samples, and ICP-MS method was used to determine the content of 26 elements in different batches of earthworm polypeptide. The linear relationships of 26 elements were good in the range of 0-1 000 μg·L^-1, with R² greater than 0.999, precision RSD 0.21%-2.71%, repeatability RSD 0.19%-4.69%, stability RSD 0.11%-4.24%, and recovery rates of 82.41%-116.16%. The data was plotted using Origin 2022 software to characterize the distribution of elements content. SPSS 27.0 was used for principal component analysis, and SIMCA 14.1 software was used for OPLS-DA analysis. The results showed that among the 26 elements, the higher content of earthworm polypeptide was K, Na, and Ca, followed by Zn, Fe, Al, B and other trace elements, In, Sc, Co, Pb, Bi and other elements had little or no detectable content, and there were differences in the content of polypeptide in different batches. This study provides a theoretical basis for the production quality control, quality evaluation and drug efficacy application of earthworm polypeptide through the determination and analysis of the elements and content of earthworm polypeptide.

ObjectiveTo investigate the possible mechanism of Hewei Anshen Formula （和胃安神方） in the treatment of insomnia. MethodsSixty male SD rats were randomly divided into the normal group， the model group， the eszopiclone group and the low-， medium- and high-dose Hewei Anshen Formula groups. The insomnia model was constructed by intraperitoneal injection of p-chlorophenylalanine （PCPA） for 2 days in all groups except the normal group. After successful modelling， the eszopiclone group was given 0.33 mg/（kg·d） eszopiclone aqueous solution by gavage， the low-， medium- and high-dose Hewei Anshen Formula groups were given 10 ml/kg of Hewei Anshen Formula with a concentration of 1， 2 and 4 g/ml， respectively， and the rats in the normal group and the model group were given 10 ml/kg of saline by gavage， once a day for 7 consecutive days. The general condition of the rats was observed during the experiment， and the body mass of the rats was measured every day after medication administration. The following day after the last medication administration， pentobarbital sodium co-test was used to observe the sleep condition， and the sleep latency and sleep duration were recorded； immunohistochemistry and Western blot were used to detect the expression of hypothalamic clock rhythm regulating protein （CLOCK） and brain and muscle aromatic hydrocarbon receptor nuclear transporter-like protein 1 （BMAL1） in the rats. ResultsThe body mass of rats in the model group was lower than that of rats in the normal group at all time points （P＜0.01）； compared with the same time in the eszopiclone group， the body mass of rats in the low-dose Hewei Anshen Formula group was elevated on the 5th， 6th and 7th days of medication administration （P＜0.05）. Compared with the normal group， the sleep duration of rats in the model group was shortened （P＜0.01）； compared with the model group， the sleep duration of rats in each dosage group increased （P＜0.01）， and the difference between the high-dose Hewei Anshen Formula group and the eszopiclone group showed no statistically significant （P＞0.05）， while the sleep duration of the low- and medium-dose Hewei Anshen Formula groups were shorterned than the eszopiclone group （P＜0.01）. The difference in sleep latency showed no statistically significant among each group （P＞0.05）. The results of both immunohistochemistry and Western blotting showed that the expression of CLOCK and BMAL1 in the hypothalamus of rats in the model group was significantly reduced compared with that in the normal group （P＜0.01）； the expression of CLOCK and BMAL1 in the hypothalamus of rats in the low- and high-dose Hewei Anshen Formula groups increased than that in the model group （P＜0.05 or P＜0.01）. ConclusionHewei Anshen Formula can improve insomnia in model rats， and its mechanism of action may be related to the up-regulation of the expression of the hypothalamic biological clock genes CLOCK and BMAL1 protein.

ObjectiveTo investigate the effect of Fuzheng Huayu prescription on hepatocyte extinction and regeneration in fibrotic liver and its mechanism of action in promoting hepatocyte regeneration. MethodsMice were given intraperitoneal injection of CCl₄ for 6 weeks to establish a model of liver cirrhosis， and there were 10 mice in the model group， 10 in the sorafenib group， 10 in the Fuzheng Huayu prescription group， and 9 in the normal control group. Since week 4 of modeling， the mice in the Fuzheng Huayu prescription group and the sorafenib group were given the corresponding drug by gavage at a dose of 4.8 g/kg and 4 mg/kg， respectively， for three consecutive weeks， and those in the normal group and the model group were given an equal volume of sodium carboxymethyl cellulose. Serum liver function parameters were measured； the METAVIR scoring system was used to evaluate liver inflammation and fibrosis stage； Sirius Red staining and hydroxyproline （Hyp） content in liver tissue were used to evaluate collagen deposition； immunohistochemistry was used to measure the protein expression levels of type IV collagen， CD31， CD32b， Ki67， CyclinD1， glutamine synthetase， Wnt2， and HGF， and Western blot was used to measure the expression levels of Wnt2， LRP6， β-catenin， p-β-catenin， and CyclinD1 in liver tissue. A one-way analysis of variance was used for comparison of continuous data between multiple groups， and the least significant difference t-test was used for further comparison between two groups. ResultsCompared with the model group， the Fuzheng Huayu prescription group and the sorafenib group showed the following changes： significant reductions in the serum levels of alanine aminotransferase and aspartate aminotransferase and the content of Hyp in liver tissue （all P<0.01）； a significant reduction in METAVIR score； significant reductions in the expression levels of type Ⅳ collagen and CD31 （all P<0.05） and a significant increase in the expression level of CD32b （P<0.01）； significant reductions in the number of parenchymal extinction lesions and significant increases in the expression levels of Ki67 and CyclinD1 in liver tissue （all P<0.01）； significant increases in the protein expression levels of Wnt2， LRP6， β-catenin， and CyclinD1 and a significant reduction in the protein expression level of p-β-catenin （all P<0.05）； significant increases in the number of cells stained positive for both CD32b and Wnt2. ConclusionFuzheng Huayu prescription can inhibit hepatic sinusoidal capillarization， improve the Wnt2 exocrine function of liver sinusoidal endothelial cells， activate the Wnt/β-catenin signaling pathway associated with hepatocyte regeneration， and finally reverse liver cirrhosis.

Objective To investigate the value of qualitative and quantitative characteristics of gadolinium ethoxybenzyl diethylenetriamine pentaacetic acid(Gd-EOB-DTPA)enhanced MRI in preoperative prediction of vessels encapsulating tumor clusters(VETC)pattern in hepatocellular carcinoma(HCC).Methods A total of 234 patients diagnosed with HCC by pathology were analyzed retrospectively.A total of 101 VETC-positive HCC patients and 133 VETC-negative HCC patients were included.All patients were divided into training group and validation group according to 7︰3.The training group data were used to construct a prediction model for VETC-positive HCC.Receiver operating characteristic(ROC)curve was drawn and the area under the curve(AUC)was calculated to verify the diagnostic efficiency of the model.Calibration curve was drawn to verify the calibration of the model.Results Multivariate logistic regression analysis predicted the independent risk factors for VETC-positive HCC:portal phase peripheral washout[odds ratio(OR)6.493],necrosis or severe ischemia(OR 4.756),targetoid transitional phase or hepatobiliary phase(OR 0.307),and lesion to liver signal intensity ratio(LLR)on arterial phase(OR 0.074).The AUC of the training group in predicting VETC-positive HCC was 0.790[95%confidence interval(CI)0.720-0.859].The AUC of the validation group in predicting VETC-positive HCC was 0.779(95%CI 0.668-0.889).The calibration curve diagram showed that the calibration curve(the slope was 0.91)almost coincides with the ideal curve,indicating that the prediction model had better calibration.Conclusion The qualitative and quantitative characteristics of Gd-EOB-DTPA enhanced MRI can be used to predict VETC-positive HCC preoperatively,the independent risk factors of VETC include portal phase peripheral washout,necrosis or severe ischemia,targetoid transitional phase or hepatobiliary phase,and LLR on arterial phase.

BACKGROUND:At present,there is still controversy in clinical practice about the choice of internal fixation of Pauwels type Ⅲ femoral neck fracture,and the selection of internal fixation that provides stable fixation strength is the key basis for achieving Pauwels type Ⅲ fracture fixation. OBJECTIVE:The three-dimensional finite element analysis method was used to test the difference in biomechanical strength of three types of internal fixation in Pauwels type Ⅲ femoral neck fracture,which provided a reference for its clinical treatment. METHODS:Using the CT data of the left femur of a healthy male volunteer,a complete femur and its cancellous bone were reconstructed in Mimics software,and Geomagic studio software was used for reverse modeling.Cannulated compression screw,dynamic hip screw,and femoral neck system were created in UG-NX software.Three kinds of internal fixation models were assembled on the femur model,and Pauwels type Ⅲ femoral neck fracture was simulated by Hypermesh software.Finally,Abaqus software was used to carry out finite element experimental analysis to analyze and compare the stress distribution,stress peak,strain,and displacement distribution caused by fixed femoral neck fracture of different internal fixation systems. RESULTS AND CONCLUSION:(1)The stress of the proximal femur bone mass was mainly distributed in the area below the femoral neck near the fracture end,with the highest stress peak in the dynamic hip screw group and the smallest in the femoral neck system group.(2)The stress distribution of the internal fixation device was mainly concentrated on the screw surface near the fracture line,with the highest stress peak in the femoral neck system group and the smallest in the dynamic hip screw group.(3)The main strain field of the proximal femur bone mass was distributed in the upper surface area where the bone and screw contacted,and the yield strain was the smallest in the femoral neck system group and the largest in the cannulated compression screw group.(4)The main strain field of the internal fixation device model was distributed on the upper surface of the femoral neck screw,with the yield strain being the smallest in the femoral neck system group and the largest in the cannulated compression screw group.(5)The displacement distribution values of femur,proximal bone mass,distal bone block,internal fixation device and internal fixation with the femur as a whole in the three femoral neck fracture internal fixation models decreased gradually from proximal to distal,and the peak displacement of the femoral neck system group was the largest and the lowest in the dynamic hip screw group.(6)The results showed that when the Pauwels type Ⅲ femoral neck fracture was fixed,the stress distribution of femoral neck system was more uniform,the mechanical conduction characteristics were better,and it was subjected to lower yield strain,higher stress and higher displacement.It has relatively better biomechanical stability and can provide a superior mechanical environment for fracture healing.