ObjectiveTo optimize the processing technology of honey bran-fried Rosae Laevigatae Fructus（h-RLF）， formulate relevant quality standards， and explore its improving effect and mechanism on mice with ulcerative colitis（UC） induced by dextran sodium sulfate（DSS）. MethodsTaking the content of polysaccharides and water-soluble extract as the indexes， L₉（3⁴） orthogonal test was used to optimize parameters of the amount of honey bran， frying time and frying temperature. The quality of 15 batches of h-RLF decoction pieces was evaluated according to the optimized process， and the inspection limit standard was preliminarily drawn up. Eighty SPF male Kunming mice were randomly divided into 8 groups， including the blank group， model group， mesalazine group（0.13 g·kg^-1）， RLF group（3.77 g·kg^-1）， bran-fried RLF group（3.77 g·kg^-1）， h-RLF low， medium and high dose groups（1.89， 3.77， 7.54 g·kg^-1）， with 10 mice in each group. The mice in the blank group were free to drink pure water， and the other groups were free to drink 3% DSS solution for 7 days to prepare UC mouse model. Each treatment group was given corresponding drugs by intragastric administration， and the blank and model groups were given equal volume of normal saline. The body weight of mice was recorded daily and the disease activity index（DAI） was calculated. After the administration， the colon tissues of mice were collected to observe the pathological changes by hematoxylin-eosin（HE） staining. The levels of tumor necrosis factor（TNF）-α， interleukin（IL）-1β， IL-6 and IL-10 in the colon of mice were detected by enzyme-linked immunosorbent assay（ELISA）. Western blot was used to detect the expression levels of phosphorylation nuclear transcription factor-κB p65（p-NF-κB p65）， Toll-like receptor 4（TLR4）， p-p38 mitogen-activated protein kinase（p-p38 MAPK）， p-extracellular signal-regulated kinase（p-ERK） and p-c-Jun N-terminal kinase（p-JNK） proteins in colon tissues. ResultsThe optimum processing technology of h-RLF was 20 g honey bran per 100 g RLF， and stir-frying at 200 ℃ for 8 min. The limit standard under the examination of h-RLF was preliminarily formulated as follows：the polysaccharide content should not be less than 25% based on anhydrous glucose（C₆H₁₂O₆）， the content of water-soluble extract should not be less than 38%， the moisture content should not be more than 12.0%， the total ash content should not be more than 5.0%， and the acid-insoluble ash content should not be more than 1.0%. The cluster heat map analysis showed that the quality of RLF from Huanggang， Hubei province was better. Animal experiments showed that compared with the blank group， the DAI score of the model group was significantly increased， the levels of TNF-α， IL-1β and IL-6 in the colon tissue were significantly increased， the IL-10 level was significantly decreased， the colonic mucosa was seriously damaged， accompanied by a large number of inflammatory cell infiltration， tissue congestion and a significant reduction in glands， and the expression levels of p-NF-κB p65， TLR4， p-p38 MAPK， p-ERK and p-JNK proteins were significantly increased（P<0.01）. Compared with the model group， each administration group could alleviate the symptoms of colonic ulcer， the structure of colonic crypt was basically intact， and the glands were arranged in an orderly manner. Among them， the high-dose group of h-RLF had a better effect， which could significantly reduce the DAI score and the levels of TNF-α， IL-1β and IL-6 in colon tissue（P<0.01）， and significantly increase the level of IL-10（P<0.01）， alleviate the colonic mucosal injury， and effectively inhibit the expression levels of p-NF-κB p65， TLR4， p-p38 MAPK， p-ERK and p-JNK proteins（P<0.01）. ConclusionThe key parameters of the processing technology of h-RLF are determined， and the optimized technology is stable and feasible. The established quality standard is simple and reliable， and can be used for the quality control. h-RLF can effectively alleviate DSS-induced UC， and its mechanism may be related to inhibiting the activation of NF-κB/TLR4/MAPK pathway.

This study aims to develop a fully automated method for tooth segmentation and root canal measurement based on cone beam computed tomography (CBCT) images, providing objective, efficient, and accurate measurement results to guide and assist clinicians in root canal diagnosis grading, instrument selection, and preoperative planning. The method utilized Attention U-Net to recognize tooth descriptors, cropped regions of interest (ROIs) based on the center of mass of these descriptors, and applied an integrated deep learning method for segmentation. The segmentation results were mapped back to the original coordinates and position-corrected, followed by automatic measurement and visualization of root canal lengths and angles. The results indicated that the Dice coefficient for segmentation was 96.42%, the Jaccard coefficient was 93.11%, the Hausdorff Distance was 2.07 mm, and the average surface distance was 0.23 mm, all of which surpassed existing methods. The relative error of the root canal working length measurement was 3.15% (< 5%), the curvature angle error was 2.85 °, and the correct classification rate of the treatment difficulty coefficient was 90.48%. The proposed methods all achieved favorable results, which can provide an important reference for clinical application.
Cone-Beam Computed Tomography/methods* ; Deep Learning ; Humans ; Dental Pulp Cavity/diagnostic imaging* ; Image Processing, Computer-Assisted/methods*

Objective To investigate the risk factors for diabetic ketoacidosis(DKA)in children/adolescents with type 1 diabetes mellitus(T1DM)and to establish a model for predicting the risk of DKA.Methods A retrospective analysis was performed on 217 children/adolescents with T1DM who were admitted to General Hospital of Ningxia Medical University from January 2018 to December 2021.Among the 217 children/adolescents,169 cases with DKA were included as the DKA group and 48 cases without DKA were included as the non-DKA group.The risk factors for DKA in the children/adolescents with T1DM were analyzed,and a nomogram model was established for predicting the risk of DKA in children/adolescents with T1DM.Results For the 217 children/adolescents with T1DM,the incidence rate of DKA was 77.9%(169/217).The multivariate logistic regression analysis showed that high levels of random blood glucose,hemoglobin A1c(HbA1c),blood ketone body,and triglyceride on admission were closely associated with the development of DKA in the children/adolescents with T1DM(OR=1.156,3.203×1015,20.131,and 9.519 respectively;P<0.05).The nomogram prediction model had a C-statistic of 0.95,with a mean absolute error of 0.004 between the risk of DKA predicted by the nomogram model and the actual risk of DKA,indicating that the model had a good overall prediction ability.Conclusions High levels of random blood glucose,HbA1c,blood ketone body,and triglyceride on admission are closely associated with the development of DKA in children/adolescents with T1DM,and targeted intervention measures should be developed to reduce the risk of DKA.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.

Programmed cell death 1 ligand 1 (PD-L1) is an important immunosuppressive molecule, which inhibits the function of T cells and other immune cells by binding to the receptor programmed cell death-1. The PD-L1 expression disorder plays an important role in the occurrence, development, and treatment of sepsis or other inflammatory diseases, and has become an important target for the treatment of these diseases. Mesenchymal stem cells (MSCs) are a kind of pluripotent stem cells with multiple differentiation potential. In recent years, MSCs have been found to have a strong immunosuppressive ability and are used to treat various inflammatory insults caused by hyperimmune diseases. Moreover, PD-L1 is deeply involved in the immunosuppressive events of MSCs and plays an important role in the treatment of various diseases. In this review, we will summarize the main regulatory mechanism of PD-L1 expression, and discuss various biological functions of PD-L1 in the immune regulation of MSCs.

Astrocytes are the largest glial population in the mammalian brain. However, we have a minimal understanding of astrocyte development, especially fate specification in different regions of the brain. Through lineage tracing of the progenitors of the third ventricle (3V) wall via in-utero electroporation in the embryonic mouse brain, we show the fate specification and migration pattern of astrocytes derived from radial glia along the 3V wall. Unexpectedly, radial glia located in different regions along the 3V wall of the diencephalon produce distinct cell types: radial glia in the upper region produce astrocytes and those in the lower region produce neurons in the diencephalon. With genetic fate mapping analysis, we reveal that the first population of astrocytes appears along the zona incerta in the diencephalon. Astrogenesis occurs at an early time point in the dorsal region relative to that in the ventral region of the developing diencephalon. With transcriptomic analysis of the region-specific 3V wall and lateral ventricle (LV) wall, we identified cohorts of differentially-expressed genes in the dorsal 3V wall compared to the ventral 3V wall and LV wall that may regulate astrogenesis in the dorsal diencephalon. Together, these results demonstrate that the generation of astrocytes shows a spatiotemporal pattern in the developing mouse diencephalon.
Mice ; Animals ; Astrocytes ; Neuroglia/physiology* ; Diencephalon ; Brain ; Neurons ; Mammals

Receptor-interacting serine/threonine-protein kinase 1 (RIPK1) functions as a key regulator in inflammation and cell death and is involved in mediating a variety of inflammatory or degenerative diseases. A number of allosteric RIPK1 inhibitors (RIPK1i) have been developed, and some of them have already advanced into clinical evaluation. Recently, selective RIPK1i that interact with both the allosteric pocket and the ATP-binding site of RIPK1 have started to emerge. Here, we report the rational development of a new series of type-II RIPK1i based on the rediscovery of a reported but mechanistically atypical RIPK3i. We also describe the structure-guided lead optimization of a potent, selective, and orally bioavailable RIPK1i, 62, which exhibits extraordinary efficacies in mouse models of acute or chronic inflammatory diseases. Collectively, 62 provides a useful tool for evaluating RIPK1 in animal disease models and a promising lead for further drug development.

Objective:To analyze the association between visceral fat area (VFA) and fatty liver based on quantitative CT (QCT) in people receiving health examination with normal body mass index (BMI).Methods:A cross-sectional study. A total of 1 305 physical examiners who underwent chest CT and QCT examination in the Department of Health Management of Henan Provincial People′s Hospital from January to December 2021 were retrospectively selected as subjects. The physical components at the central level of the lumbar two cone were measured with QCT, including subcutaneous fat area (SFA), VFA and liver fat content (LFC). And the metabolic indexes, such as blood lipids and blood glucose, were collected. The t-test and χ2 test were used to analyze the correlation between the detection rate of fatty live and LFCr and age and gender. According to level of VFA (<100 cm 2, 100-150 cm 2 and≥150 cm 2), the subjects were divided into three groups, and one-way ANOVA and χ2 test were used in comparison between groups. Multiple linear regression was used to analyze the correlation between VFA and metabolic indexes and LFC. Results:Of the 1 305 subjects, there were 634 males and 671 females. The detection rate of fatty liver in normal BMI population was 65.67%, and it was 72.71% and 59.02% respectively in men and women ( χ2=27.12, P<0.001), and the detection rate of fatty liver and LFC increased with age (both P<0.05). With the increase of VFA, the age, BMI, SFA, LFC, total cholesterol (TC), triacylglycerol (TG), low-density lipoprotein cholesterol (LDL-C), fasting blood glucose (FBG), alanine aminotransferase (ALT), blood uric acid and prevalence of fatty liver increased (all P<0.05), and the low-density lipoprotein cholesterol (HDL-C) decreased ( P<0.001). Multiple linear regression analysis showed that after adjustment for age factors, regardless of male or female, LFC was independently positively related with VFA, BMI, and ALT (male β=0.206, 0.145, 0.174, female β=0.194, 0.150, 0.184; all P<0.05). FBG was positively correlated with male independently ( β=0.134; P<0.001). The indicators related to female independently were TC, TG, and blood uric acid ( β=-0.121, 0.145, 0.141, all P<0.05) Conclusion:In the population receiving health examination with normal BMI, the VFA measured by QCT technique is closely related to fatty liver.

As the backbone force of China's social and economic construction, the health status of workers is closely related to the nation's productivity and social development. Currently, cancers have become one of the major diseases threatening the health of workers. However, there are still many shortcomings in the cancer screening services for the workers. To standardize cancer screening services for workers, ensure the quality of screening services, and improve the overall screening effectiveness, 19 institutions, including Peking Union Medical College Hospital of the Chinese Academy of Medical Sciences, have jointly formulated the Group Standard "Specification for service of cancer screening for workers (T/CHAA 023-2023)". This standard follows the principles of "legality, scientific rigor, advancement, and feasibility" and combines the frontier scientific advances in cancer screening. It clarifies the relevant requirements for service principles, service design, service delivery, service management, service evaluation, and improving worker cancer screening. Implementing this group standard will help connect the common screening needs of workers, employers, and cancer screening service providers, standardize the screening process, improve screening quality, and ultimately increase the early diagnosis rate and survival rate of cancer patients. Consequently, this group standard will help safeguard workers' health rights and interests, ensure the labor force resources, promote the comprehensive coordinated and sustainable development of society, and contribute to realizing the "Healthy China 2030" strategic policy.

Objective To investigate the relationship between single nucleotide polymorphisms(SNPs)in the eNOS gene and genetic susceptibility to systemic lupus erythematosus(SLE)in Hainan.Methods Blood samples were collected from SLE patients(SLE group,n=214)and healthy controls(control group,n=214)from January 2020 to December 2022 at the First Affiliated Hospital of Hainan Medical College and Hainan Provincial People's Hospital.The bases of eNOS gene rs3918188,rs1799983 and rs1007311 loci in each group were detected by SNaPshot sequencing technology.Logistic regression was used to analyze the correlation between genotypes,alleles and gene models(dominant model,recessive model,and overdominant model)of the above 3 target loci of the eNOS gene and genetic susceptibility to SLE.Haplotype analysis was conducted using HaploView 4.2 software to investigate the relationship between haploid and genetic susceptibility to SLE at each site.Results The results of logistic regression analysis revealed that the CC genotype and the C allele at rs3918188 locus were risk factors for genetic susceptibility to SLE(CC vs.AA:OR=2.449,P<0.05;C vs.A:OR=2.133,P<0.001).In recessive model at rs3918188 locus,CC genotype carriers had an increased risk of SLE development compared with AA+AC genotype carriers(OR=2.774,P<0.001).In contrast,in overdominant model at this locus,AC genotype carriers had a decreased risk of SLE occurrence compared with AA+CC genotype carriers(OR=0.385,P<0.001).In addition,polymorphisms of rs1799983 and rs1007311 were not associated with susceptibility to SLE in genotype,allele type and the 3 genetic models(P>0.05).Haplotype analysis revealed a strong linkage disequilibrium between the rs1007311 and rs1799983 loci of the eNOS gene,but no significant correlation was found between haplotype and genetic susceptibility to SLE(P>0.05).Conclusion The CC genotype and C allele at rs3918188 locus of eNOS gene may be risk factors for SLE in Hainan,while the risk of SLE occurrence is reduced in carriers of AC genotype under the overdominant model.