Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

Objective To explore the relationship between uric acid, visceral fat thickness and insulin resistance in elderly patients with hypertriglyceridemia (HTG). Methods A total of 347 elderly patients with HTG admitted to the hospital from January 2021 to January 2025 were retrospectively selected, and the related factors of insulin resistance in elderly HTG were analyzed. Results Among the 347 elderly patients with HTG, 218 cases had insulin resistance and 129 cases did not develop insulin resistance, and were included in the insulin resistance group (n=218) and the non-insulin resistance group (n=129) respectively. Compared with the non-insulin resistance group, patients in the insulin resistance group had higher proportions of severe HTG and concurrent fatty liver, higher levels of IL-6, TNF- α, FFA and uric acid, and thicker visceral fat thickness (P<0.05). After logistic regression analysis, it was found that the related factors for insulin resistance in elderly patients with HTG included the severity of HTG, IL-6, FFA, uric acid, and visceral fat thickness (P<0.05). Conclusion The severity of HTG, IL-6, FFA, uric acid, and visceral fat thickness are related to insulin resistance in elderly HTG patients. Clinically, it is necessary to pay attention to targeted interventions for uric acid control and visceral fat reduction in elderly patients with HTG so as to improve the insulin resistance status.

Background: Malignant pleural effusion (MPE), a common complication of advanced cancers, is associated with poor prognosis and reduced quality of life. Although host–tumor interactions are known to drive MPE development, the associated immune dynamics during disease progression remain unclear. Using a Lewis lung carcinoma-induced MPE model in C57BL/6JNidfc mice, we systematically evaluated general parameters and immune cell changes at two-day intervals throughout disease progression. Results: The day of Lewis lung carcinoma cell injection into the pleural space was designated as day 0. By day 10 post-injection (p.i.), MPE-bearing mice exhibited ~ 10% body weight loss, marking the experimental endpoint. Pleural tumor mass and pleural effusion volume were minimal up to day 4 p.i. but increased sharply from day 6 onward.CD45⁺ immune cell counts rose over time, and days 6, 8, and 10 p.i. marked key stages of MPE progression. On day 6, B cells, T cells, and natural killer cells, but not macrophages and neutrophils, increased significantly compared to earlier timepoints. By day 8, all immune cell subsets except T cells exceeded day 6 levels, and at day 10, natural killer cell numbers declined while others continued to increase. Besides, the numbers of CD8⁺ T cells, Th1 cells, regulatory T cells, and M2 macrophages progressively increased from day 6 to 10. Based on these data, days 6 and 10 were defined as early and advanced MPE stages, respectively, with distinct immune phenotypes. In advanced MPE, CD8⁺ T cells displayed reduced IFN-γ, TNF-α, Granzyme B, Perforin, FasL, and Ki-67, but upregulated PD-1 and CTLA-4 relative to early stage. Similarly, Th1 cells showed decreased IFN-γ, TNF-α, and IL-2 production along with reduced Ki-67 expression. Advanced-stage M2 macrophages exhibited lower MHC-II levels and impaired phagocytosis, but higher PD-L1 and IL-10 production, while neutrophils showed reduced TNF-α release and phagocytic activity. Conclusions Our findings characterize the temporal immune dynamics associated with MPE progression in a mouse model, revealing a transition from an early immunostimulatory state to a late immunosuppressive state. This study enhances our understanding of MPE immunopathogenesis and provides a foundation for developing precise, stagespecific therapeutic strategies.

Background: and Purpose Vertebrobasilar fusiform aneurysms (VBFAs) carry substantial morbidity and mortality, but optimal management for unruptured VBFAs remains unclear. We compared the safety and efficacy of conservative management (CM), stent-assisted coiling (SAC), and flow diverters (FDs) in patients with unruptured VBFAs, focusing on long-term prognosis. Methods: This study included data from a nationwide Chinese cohort of patients with vertebrobasilar dissecting aneurysms. Inverse probability of treatment weighting (IPTW) balanced confounders across groups. The primary outcome was poor prognosis (modified Rankin Scale score >2). Secondary outcomes included aneurysm rupture, ischemic stroke, compression symptoms, and VBFA-related deaths. Logistic regression estimated odds ratios (ORs) and 95% confidence intervals (CIs). Subgroup and sensitivity analyses were performed. Results: Among 1,115 patients with unruptured VBFAs, 838 (median age, 54 years; 655 men) were included. After IPTW, baseline characteristics were balanced. Median follow-up was 54 months. FD was associated with a lower risk of poor prognosis than CM (OR, 0.48 [95% CI, 0.30 to 0.77]; p=0.002), with no difference between CM and SAC. FD also reduced aneurysm rupture (OR, 0.20 [95% CI, 0.07 to 0.60]; p=0.004) and compression symptoms (OR, 0.30 [95% CI, 0.13 to 0.68]; p=0.004) versus CM. Time-to-event analyses further revealed significant differences in vertebral artery lesions and Type I–II VBFAs, whereas no significant differences were observed in basilar or vertebrobasilar junction lesions or in Type III–IV VBFAs. Conclusions Compared with CM, FD was associated with improved long-term outcomes in unruptured VBFAs, particularly in vertebral artery lesions and Type I–II VBFAs, although residual confounding cannot be excluded.

Objective In order to understand the current resistance status of Aedes albopictus(Ae. albopictus) adult population to commonly used insecticides and the resistance dynamics development in Zhejiang Province and provide a theoretical basis for the scientific and rational use of hygienic insecticides. Methods Resistance determination was carried out using the diagnostic dose method(GB/T 26347-2010)recommended by WHO in the adult mosquito contact cylinder method to monitor the resistance of Ae. albopictus field populations in 11 cities and districts in Zhejiang Province in 2024. Results The monitoring result showed that adult Ae. albopictus in 11 areas were resistant or suspected resistant populations to both cis-cypermethrin and permethrin; suspected and resistant populations to the organophosphate insecticide malathion were as high as 81.82%; while suspected resistance to the carbamate insecticide residual carbofuran accounted for 45.45%, and the rest of the monitoring sites were sensitive to it. Conclusions The result suggest that the generalized resistance of Ae. albopictus populations to pyrethroids and organophosphorus insecticides in the field in Zhejiang Province needs to be highly emphasized. In future mosquito vector and mosquito-borne disease control, insecticides should be selected based on the resistance monitoring information, while following scientific guidelines for insecticide use.

OpenSim is an open source, free motion simulation and gait analysis software, which can be used to dynamically simulate and analyze the complex motion of the human body, and is widely used in human biomechanical research. Since OpenSim can analyze multi-dimensional motion data such as muscle strength, joint torque, and muscle synergistic activation during human movement, it can be used to study the biomechanical mechanism of musculoskeletal imbalance diseases and various treatment methods in TCM orthopedics, and has a broad application prospect in the field of TCM orthopedics. By the analysis of the basic characteristics, elements, analysis process, and application prospects of OpenSim, it is concluded that OpenSim musculoskeletal model has a large application space in the field of traditional Chinese medicine orthopedic, which is helpful to explain the pathogenesis and mechanism of diseases, and promote the precision diagnosis and treatment of orthopedics diseases;the application of OpenSim musculoskeletal model can solve the problem that the previous research paid attention to the bone malalignment and not enough attention to the tendon, and provide a new method for the research of orthopedic diseases. At present, there are still problems in the promotion and application of OpenSim, such as large equipment requirements and high operation threshold. Therefore, multidisciplinary cooperation, clinical research, and data sharing are the basic research strategies in this field.
Humans ; Biomechanical Phenomena ; Orthopedics ; Traumatology ; Software ; Medicine, Chinese Traditional ; Musculoskeletal System ; Models, Biological

OBJECTIVE: To investigate the biomechanical characteristics of retrograde tibial nailing (RTN) and distal tibial L-shaped plating in the internal fixation of distal tibial fractures. METHODS: Fourteen fresh adult tibia specimens were selected, comprising 7 males and 7 females aged from 34 to 55 years old. The specimens were randomly divided into experimental group and control group by numerical table method with 7 specimens in each group. RTN was used for internal fixation of distal tibial fractures in the experimental group, and L-shaped plate was used for internal fixation of distal tibial fractures in the control group. The axial compression properties of the two groups of specimens were tested under the pressure of 100, 200, 300, 400, and 500 N after operation, and torsional resistance at torque levels of 1.0, 2.0, 3.0, 4.0, 5.0 N·m. The anti-fatigue performance of the specimens was tested at 500 N pressure for 3 000 and 10 000 cycles. X-ray fluoroscopy was performed to observe whether the the internal fixator was deformed and whether the screw was loosened or broken. RESULTS: When the pressure was 400 N and 500 N, the axial compression displacement of the experimental group was (1.11±0.06) mm and (1.24±0.05) mm, which were smaller than those of the control group (1.21±0.08) mm and (1.37±0.11) mm, and the differences were statistically signific (P<0.05). Under the pressure of 500 N, the axial compression stiffness of the experimental group was (389.24±17.79) N·mm^-1, which was significantly higher than that of the control group (362.37±14.44) N·mm^-1(P<0.05). When the torque was 4 and 5 N·m, the torsion angles of the experimental group were (2.97±0.23) ° and (3.41±0.17) °, which were smaller than those of the control group (3.31±0.28) ° and (3.76±0.20) °, and the differences were statistically significant (P<0.05). When the torque was 5 N·m, the torsional stiffness of the experimental group was (1.48±0.07) N·m per degree, which was higher than that of the control group (1.36±0.06) N·m per degree, and the difference was statistically significant (P<0.05). For the intragroup comparison of fatigue resistance, the differences in axial compression displacement between the two groups were not statistically significant at 3 000 and 10 000 cycles (all P>0.05). When 3 000 times and 10 000 times of compression, the axial compression displacement of the experimental group was (1.38±0.08), (1.43±0.07) mm, which was smaller than that of the control group (1.51±0.10), (1.54±0.08) mm, the differences were statistically significant (P<0.05). In the experimental group, no screw loosening, fracture or internal fixation deformation was found, while in the control group, locking screw loosening occurred in 2 models after 10 000 pressures. CONCLUSION The biomechanical performance of RTN is obviously better than that of the distal tibial L-shaped plate, which provides biomechanical data support for the clinical application of RTN.
Humans ; Female ; Male ; Adult ; Tibial Fractures/physiopathology* ; Middle Aged ; Biomechanical Phenomena ; Bone Plates ; Fracture Fixation, Internal/instrumentation* ; Bone Nails ; Tibia/surgery*

Cervical spine health issues not only seriously affect patients' quality of life but also impose a heavy burden on the social healthcare system. Existing guidelines lack sufficient clinical guidance on lifestyle and work habits, such as exercise, posture, daily routine, and diet, making it difficult to meet practical needs. To address this, relying on the China Association of Chinese Medicine, Wangjing Hospital of China Academy of Chinese Medical Sciences took the lead and joined hands with more than ten institutions to form a multidisciplinary guideline development group. For the first time, the group developed the Guidelines for Cervical Spine Health Intervention based on evidence-based medicine methods, strictly following the standardized procedures outlined in the World Health Organization Handbook for Guideline Development and the Guiding Principles for the Formulation/Revision of Clinical Practice Guidelines in China (2022 Edition). This proposal systematically explains the methods and steps for developing the guideline, aiming to make the guideline development process scientific, standardized, and transparent.
Humans ; Practice Guidelines as Topic/standards* ; Cervical Vertebrae ; China