Post-and-core crown is one of the most common forms of restoration of tooth after root canal therapy (RCT). Infection control is the core objective of RCT, which is usually well realized by endodontists. However, many prosthodontists often neglect the infection control of the tooth and the maintenance of the curative effect of RCT during the process of post-and-core crown, which may lead to the failure of the final restoration. The concept of integrated crown-root treatment advocated recently requires clinicians to consider the RCT and final restoration as a whole, rather than simply divided into two parts-endodontic treatment and restorative treatment. As the core content of integrated crown-root treatment, infection control should be taken seriously by clinicians and implemented throughout the whole treatment process, especially in the restorative treatment that is easily overlooked after RCT. Therefore, this article describes the infection control of post-and-core crown restoration, classifies the tooth requiring post-and-core crown restoration, and puts forward the measures of infection control before and during post-and-core crown restoration, in order to provide reference and guidance for clinical practice.
Humans ; Crowns ; Tooth Crown ; Post and Core Technique ; Root Canal Therapy ; Infection Control ; Tooth Fractures

OBJECTIVES: The objectives of this study were to assess the quality of prosthetic prescriptions of removable partial dentures (RPDs) and to analyze the current situation of the communication and information delivery between clinicians and technicians. METHODS: All RPD prosthetic prescriptions received by a major dental laboratory in 4 weeks were involved in a quality audit, and the prescriptions were divided into three groups in accordance with the grades of clients. The filling of prosthetic prescriptions was recorded. The items in the prescriptions for audit included the general information of the patient, the general information of the clinician, the design diagram information, other detailed information, and the return date. The prescriptions were categorized into four levels on the basis of their quality by two quality inspectors who have been working for more than 10 years. RESULTS: A total of 916 prescriptions were collected and assessed. The names in the general information of the patient and the clinician were filled out best, both at the rate of 97.6% (n=894). The return date was filled out worst, only at the rate of 6.4% (n=59). Of those prescriptions, 86.8% (n=795) exhibited inadequate design diagram information. The results of the quality assessment demonstrated that 74.2% of prescriptions were assessed as noncompliant ones and failed to meet the acceptable clinical quality standard. CONCLUSIONS At present, the overall quality of RPD prosthetic prescriptions is poor. The responsibilities of clinicians and technicians are unclear, and the communication between them is not ideal.
Humans ; Denture Design ; Denture, Partial, Removable ; Prescriptions

OBJECTIVES: This study aimed to evaluate the long-term clinical efficacy of simple taper retentive implants in the posterior dental area after immediate implantation for 5-7 years. METHODS: Selected from January 2015 to December 2017 in the Fourth Affiliated Hospital of Nanchang University dental clinic line tooth area immediately after the implant prosthesis, a total of 38 patients, 53 implants, were deep into (bone under 2 mm or higher) and the upper structure was repaired. In addition, after the completion of tracking observation of 60-90 months, the implant surrounding bone health was recorded and analyzed. RESULTS: After 5-7 years of follow-up, 1 of the 53 implants failed to fall out, and the implant retention rate was 98.1%. The amount of bone resorption in the proximal and distal margins 5-7 years after implant restoration was (0.16±0.94) mm and (-0.01±1.29) mm, respectively, and the difference in bone height between the proximal and distal margins of the implant and the immediate post-restoration period was not statistically significant (P>0.05). No statistically significant differences were found in the effects of periodontitis, implant site inflammation, and smoking on peri-implant marginal bone resorption (P>0.05). CONCLUSIONS The single taper-retained implant broadens the indications for immediate implant placement in the posterior region, and its deep sub-osseous placement (≥2 mm below the bone) avoids to a certain extent the disturbance of the implant by external stimuli and the exposure of the cervical abutment of the implant, with the good long-term stability of the marginal bone around the implant.
Humans ; Dental Implantation, Endosseous ; Dental Implants ; Immediate Dental Implant Loading ; Follow-Up Studies ; Dental Implants, Single-Tooth ; Alveolar Bone Loss/surgery* ; Treatment Outcome ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure

Based on evidence-based clinical and material researches, the Society of Prosthodontics, Chinese Stomatological Association organized a panel of experts to write a recommended application guideline via in-depth discussion and literature reviewing. This guideline formulates the standardized operation procedures for the clinical usage of chairside computer aided design and computer aided manufacturing (CAD/CAM) rehabilitation with resin-ceramic composites, aiming at guiding and specifying this clinical technique. This guideline will help to improve the quality, the clinical efficacy, and the long-term success rate of chairside CAD/CAM rehabilitation with resin-ceramic composites via standardizing this restoration technique. At the same time, this guideline will contribute to the clinical promotion of this technique.
Ceramics ; Composite Resins ; Computer-Aided Design ; Dental Prosthesis Design ; Prosthodontics

With the rapid development of digital techniques and the lack of reference standards for chairside computer aided design and computer aided manufacturing (CAD/CAM) operation and application, it is imperative to draft guidelines for chairside CAD/CAM restoration techniques for all ceramics. Therefore, the Society of Prosthodontics, Chinese Stomatological Association recruited experts to compose a recommended application guideline based on the relevant literatures and clinical experiences, including the selection of indications, tooth preparation, optical impression making and other key steps. This guideline is aimed at providing a standardized operation procedure to improve the quality and long-term success rate of chairside CAD/CAM rehabilitation for all ceramics.
Dental Prosthesis Design ; Computer-Aided Design ; Ceramics ; Prosthodontics ; Dental Porcelain

In recent years, with the rapid development of digital technology, the application of oral virtual patients in prosthodontics, orthodontics, oral and maxillofacial surgery, and other disciplines has gradually increased. Although the focus on oral virtual patients varies in different disciplines, the application of oral virtual patients in assisting the prediction of treatment effects and the formulation of treatment plans will have good prospects. The construction accuracy and presentation effects of oral virtual patients can be influenced by the source of three-dimensional (3D) image, and methods of registration. Based on the studies and clinical experiences of our team, researches of other teams, the source of 3D images, the construction methods, and the clinical applications of virtual patients in prosthodontics will be presented, so as to provide a reference for normalized application and development of oral virtual patients and to offer a future development direction of oral virtual patients.
Humans ; Prosthodontics/methods* ; Imaging, Three-Dimensional ; Orthodontics ; Surgery, Oral

OBJECTIVE: To compare the effects of resin base and different retention depth on the fracture resistance of mandibular molars restored with nano-ceramic endocrowns. METHODS: Forty mandibular molars selected and randomly divided into 5 groups: ① The control group which was consisted of intact teeth, ② the non-resin base group, ③ the 2 mm retention depth group, ④ the 3 mm retention depth group, ⑤ the 4 mm retention depth group, respectively. After tooth preparation, in vitro root canal therapy was conducted, which was followed by endocrown design, production and adhesive of groups ②-⑤. All the samples were under load (N) of the universal mechanical testing machine after embedding. The fracture pattern of each sample was observed under stereomicroscope. Then the microstructure of the fracture surface was observed by scanning electron microscopy. RESULTS: The fracture loads of each group were respectively: the control group fracture load was (3 069.34±939.50) N; experimental groups: fracture load of (2 438.04±774.40) N for the group without resin base; fracture load of (3 537.18±763.65) N for the group with 2 mm retention depth. The fracture load of the retention depth 3 mm group was (2 331.55±766.39) N; the fracture load of the retention depth 4 mm group was (2 786.98±709.24) N. There was statistical significance in the effect of resin base and different retention depth on the fracture loads of molars restored with nano-ceramic endocrown (P < 0.05). Repairable fractures in each group were as follows: control group 2/8, non-resin base group 1/8, retention depth of 2 mm group 1/8, retention depth of 3 mm group 2/8, and retention depth of 4 mm group 0/8. The effects of the retention depth and the presence of resin base on the fracture resistance of the resin nano-ceramic endocrowns were statistically significant (P < 0.05). Scanning electron microscopy showed more arrest lines and small twist hackles on the fracture surface of the restorations with resin base (retention depths of 2 mm, 3 mm, and 4 mm), with cracks extending towards the root. In addition to the characteristics above, more transverse cracks parallel to the occlusal surface, pointing outwards from the center of the pulp cavity retention, were also observed on the fracture surface of the non-resin base restorations. CONCLUSION When molar teeth with nano-ceramic endocrowns are restored, resin base and the retention depth of 2 mm help the teeth to obtain optimal fracture strength.
Ceramics ; Composite Resins ; Dental Porcelain ; Dental Restoration Failure ; Dental Stress Analysis ; Materials Testing ; Molar

OBJECTIVE: To compare the retentions of different designs of cobalt-chromium (Co-Cr), pure titanium (CP Ti), and titanium alloy (Ti-6Al-4V) removable partial denture (RPD) circumferential clasps manufactured by selective laser melting (SLM) and to analyze the stress distribution of these clasps during the removal from abutment teeth. METHODS: Clasps with clasp arm size A (1.9 mm width/1.1 mm thickness at the body and 0.8-taper) or B (1.2 times A) and 0.25 mm or 0.50 mm undercut engagement were modeled on a prepared first premolar die, named as designs A1, A2, A3, and A4, respectively. The density and elastic modulus of SLM-built Co-Cr, CP Ti, and Ti-6Al-4V were measured and given to different groups of clasps. The density, elastic modulus, and Poisson ' s ratio of enamel were given to the die. The control group was the cast Co-Cr clasp with design A1, to which the density and elastic modulus of cast Co-Cr alloy were given. The Poisson's ratio of all metals was 0.33. The initial 5 N dislodging force was applied, and the maximum displacement of the clasp along the insertion path was computed. The load was reapplied with an increment of 5 N than in the last simulation until the clasp was completely dislodged. The retentive force range of different groups of clasps was obtained. The retentive forces of the SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with equivalent computed retentive force range to the control group were validated through the insertion/removal experiment. The von Mises stress distributions of these three groups of SLM-built clasps under 15 N loads were analyzed. RESULTS: SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with designs B1 or B2, and Co-Cr clasps with design A2 had higher retentive forces than those of the control group. SLM-built CP Ti and Ti-6Al-4V clasps with design A1 had lower retentive forces than those of the control group. SLM-built Co-Cr clasp with design A1 and SLM-built CP Ti and Ti-6Al-4V clasps with design A2 had equivalent retentive forces to those of the control group. The insertion/removal experiment showed that the measured retentive forces of these three groups of SLM-built clasps were (21.57±5.41) N, (19.75±4.47) N, and (19.32±2.04) N, respectively. No statistically significant measured retentive force difference was found among these three groups of SLM-built clasps (P>0.05). The maximum von Mises stress of these three groups of SLM-built clasps exceeded their responding yield strength except for the Ti-6Al-4V one. CONCLUSION SLM-built Co-Cr circumferential clasps had higher retention than CP Ti and Ti-6Al-4V ones with the same clasp arm size and undercut engagement. The retention of SLM-built circumferential clasps could be adjusted by changing the undercut engagement and clasp arm size. If SLM-built circumferential clasps are used in clinical practice, the Ti-6Al-4V clasp with clasp arm size A and 0.50 mm undercut engagement is recommended considering the long-term use of RPD in the patient's mouth.
Chromium Alloys ; Dental Clasps ; Denture Retention ; Denture, Partial, Removable ; Finite Element Analysis ; Humans ; Lasers ; Titanium

ABSTRACT Implant periapical lesion (IPL) is also known as retrograde peri-implantitis and as the name suggests, it involves inflammation surrounding the apical part of the dental implants. Previously, many studies have reported the event of IPL that further delays osseointegration, and some reported failure of implant placement due to this disease. In this article, we described two cases of early dental implant failure that was associated with active IPL and correlated the clinical and radiographical findings with the histopathological findings.
Dental Restoration Failure ; Dental Implants--adverse effects ; Periapical Tissue

Zirconia is widely used in the field of dentistry because of its superior mechanical and esthetic characteristics. However, the tetragonal zirconia polycrystal restorations commonly used in clinics will degrade at low temperatures in the oral environment, resulting in increased surface roughness, microcracks, and decreased mechanical properties. Low-temperature degradation of zirconia can be affected by grain size, stress, stabilizer content and type, surface treatment, sintering conditions, and other factors. Through a literature review and analysis, this review summarizes the research progress on the low-temperature degradation of zirconia in prosthetic dentistry to provide references for the improvement of zirconia in clinical and research applications.
Ceramics ; Dental Materials ; Esthetics, Dental ; Materials Testing ; Prosthodontics ; Surface Properties ; Temperature ; Yttrium/chemistry* ; Zirconium