Implant-Assisted Removable Partial Dentures (IARPDs) treatment is being performed in a fully edentulous patient using implant surveyed prosthesis as an abutment. Implant-supported prosthesis as an abutment of IARPDs is classified into screw-retained and cement-retained type according to the retention type, and each has advantages and disadvantages. The EZ crown system (Samwon DMP, Yangsan, Korea) has a cylinder combined with abutment, and the nickel-titanium spring in this cylinder provides a constant force on the zirconia ball to obtain retention in EZ crown system. In this patient, the natural abutment teeth of the mandibular overdenture was hopeless. We planned implant assisted removable partial denture using anterior implant surveyed prosthesis considering functional and esthetical rehabilitation, cost and patient's needs. When fabricating IARPDs using implant as abutment, we could compensate for the shortcomings of existing implant-supported prosthesis retention type and made the design of removable partial denture easy due to using EZ crown system.
Crowns ; Denture, Overlay ; Denture, Partial, Removable ; Gyeongsangnam-do ; Humans ; Prostheses and Implants ; Prosthesis Retention ; Rehabilitation ; Tooth

The field of prosthetic urology demonstrates the striking impact that simple devices can have on quality of life. Penile prosthesis and artificial urinary sphincter implantation are the cornerstone procedures on which this specialty focuses. Modern research largely concentrates on decreasing the rates of complication and infection, as the current devices offer superior rates of satisfaction when revision is not necessary. These techniques are also able to salvage sexual function and continence in more difficult patient populations including female-to-male transgender individuals, those with ischemic priapism, and those with erectile dysfunction and incontinence secondary to prostatectomy. This review summarizes modern techniques, outcomes, and complications in the field of prosthetic urology.
Erectile Dysfunction/surgery* ; Humans ; Male ; Penile Implantation/methods* ; Penile Prosthesis ; Postoperative Complications/epidemiology* ; Prostatectomy/adverse effects* ; Prosthesis Failure ; Prosthesis Implantation/methods* ; Prosthesis-Related Infections/epidemiology* ; Surgical Wound Infection/epidemiology* ; Urethra/injuries* ; Urinary Incontinence, Stress/surgery* ; Urinary Retention/epidemiology* ; Urinary Sphincter, Artificial ; Urology

The aging society of the global population has led to an increase in the number of patients with edentulous jaw, a common multiple disease. Given the developments in implant techniques, the method of implant denture has received a positive and good response in terms of the quality of life and psychological well-being of patients. Implant-supported overdenture in mandible has two main advantages. 1) It has better retention and chewing efficiency than those of mandibular conventional denture. The required implant site of implant-supported overdenture is less than that of fixed implant-supported denture and can repair more defect tissues to help restore beauty and pronunciation. The price of the former is more acceptable than that of the latter. Therefore, this article aimed to systemically analyze and further discuss the clinical effect of implant-supported overdenture in elderly patients; combine existing related studies on the selection of number, site, and upper restoration of implants; and illustrate the advantages of removable implant-supported protheses in the repair of toothless mandible.
Aged ; Dental Implants ; Dental Prosthesis, Implant-Supported ; Denture Retention ; Denture, Overlay ; Humans ; Jaw, Edentulous ; Mandible ; Patient Satisfaction ; Quality of Life ; Treatment Outcome

The treatment of craniofacial anomalies has been challenging as a result of technological shortcomings that could not provide a consistent protocol to perfectly restore patient-specific anatomy. In the past, wax-up and impression-based maneuvers were implemented to achieve this clinical end. However, with the advent of computer-aided design and computer-aided manufacturing (CAD/CAM) technology, a rapid and cost-effective workflow in prosthetic rehabilitation has taken the place of the outdated procedures. Because the use of implants is so profound in different facets of restorative dentistry, their placement for craniofacial prosthesis retention has also been widely popular and advantageous in a variety of clinical settings. This review aims to effectively describe the well-rounded and interdisciplinary practice of craniofacial prosthesis fabrication and retention by outlining fabrication, osseointegrated implant placement for prosthesis retention, a myriad of clinical examples in the craniofacial complex, and a glimpse of the future of bioengineering principles to restore bioactivity and physiology to the previously defected tissue.
Bioengineering ; Computer-Aided Design ; Dentistry ; Physiology ; Prostheses and Implants ; Prosthesis Retention ; Rehabilitation

PURPOSE: We describe our experience with the Permacol graft in anophthalmic socket reconstruction, and compare it to the autologous buccal mucosal graft, emphasizing the postoperative vascularization and contraction of each graft. METHODS: This was a retrospective comparative study. We measured the time necessary for the graft surface to be completely vascularized, as well as the fornix depth of the conjunctival sac in anophthalmic patients. RESULTS: Ten patients underwent Permacol graft reconstruction, with 44 undergoing buccal mucosal graft reconstruction. Seven eyelids (70%) in the Permacol group had a good outcome, with improvement in lower eyelid position and prosthesis retention. Nine out of 10 eyelids (90%) in this group showed complete vascularization of the graft at 2.6 ± 1.9 months postoperatively, while the grafted buccal mucosa was fully vascularized at 1.1 ± 0.3 months postoperatively (p < 0.01). Postoperative fornix depth in the Permacol group was 9.1 ± 2.2 mm, compared to 14.9 ± 4.5 mm in the buccal mucosal graft group (p < 0.01). Mean increases in fornix depth were 33.1% and 67.9% of the mean vertical length of the implanted graft. CONCLUSIONS: The Permacol graft can be useful as spacer graft material in anophthalmic socket patients. It takes longer to vascularize, and undergoes greater graft shrinkage with time, compared to the buccal mucosal graft.
Acellular Dermis* ; Anophthalmos ; Eyelids ; Humans ; Lacrimal Apparatus ; Mouth Mucosa* ; Prosthesis Retention ; Retrospective Studies ; Transplants*

This case study was to report the possible increase in the denture retention and psychological relief using the implant-supported fixed prostheses in a completely edentulous patient. The implants were placed in the anterior portion of the mandible in a patient who had completely edentulous state following the extraction of residual abutment teeth, and consequently a distal extension removable partial denture was fabricated. The patient's adaptation and satisfaction to the new prosthesis was monitored and confirmed in terms of masticatory function and esthetics, by restoring the oral condition similar to initial status before the residual teeth extraction. After 6 months, radiographic examination confirmed that both the abutment teeth and the implants were stable and well maintained. Considering the relatively short clinical follow-up period, however, continuous long-term monitoring was required.
Dental Prosthesis, Implant-Supported ; Denture Retention ; Denture, Partial, Removable ; Esthetics ; Follow-Up Studies ; Humans ; Mandible ; Mandibular Prosthesis ; Prostheses and Implants ; Tooth

OBJECTIVES: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling. MATERIALS AND METHODS: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, São Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, São Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (f=0.5 Hz) to determine the torque and the detorque values of the retention screws. A servo-hydraulic MTS machine (810-Flextest 40; MTS Systems, Eden Prairie, MN, USA) was used to perform the cycling with 2.5 mm and a displacement of 10 mm/s. The screws of the retention systems received an initial torque of 30 Ncm and the torque values required for loosening the screw values were obtained in three cycles (1,080, 2,160, and 3,240). The screws were retorqued to 30 Ncm before each new cycle. RESULTS: The sample was composed of 24 screws grouped as follows: bar-clip (n=8), ball/O-ring (n=8), and magnet (n=8). There were significant differences between the groups, with greater detorque values observed in the ball/O-ring group when compared to the bar-clip and magnet groups for the first cycle. However, the detorque value was greater in the bar-clip group for the second cycle. CONCLUSION: The results of this study indicate that all prosthetic screws will loosen slightly after an initial tightening torque, also the bar-clip retention system demonstrated greater loosening of the screws when compared with ball/O-ring and magnet retention systems.
Grassland ; Maxillofacial Prosthesis ; Prostheses and Implants* ; Prosthesis Failure ; Prosthesis Retention ; Torque

Prosthesis retention is not recommended for multidrug-resistant Acinetobacter prosthetic joint infection due to its high failure rate. Nevertheless, replacing the prosthesis implies high morbidity and prolonged hospitalization. Although tigecycline is not approved for the treatment of prosthetic joint infection due to multidrug resistant Acinetobacter baumannii, its appropriate use may preclude prosthesis exchange. Since the area under the curve divided by the minimum inhibitory concentration is the best pharmacodynamic predictor of its efficacy, we used tigecycline at high dose, in order to optimize its efficacy and achieve implant retention in 3 patients who refused prosthesis exchange. All patients with prosthetic joint infections treated at our Institution are prospectively registered in a database. Three patients with early prosthetic joint infection of total hip arthroplasty due to multidrug resistant A. baumannii were treated with debridement, antibiotics and implant retention, using a high maintenance dose of tigecycline (100 mg every 12 hours). The cases were retrospectively reviewed. All patients signed informed consent for receiving off-label use of tigecycline. Tigecycline was well tolerated, allowing its administration at high maintenance dose for a median of 40 days (range 30–60). Two patients were then switched to minocycline at standard doses for a median of 3.3 months in order to complete treatment. Currently, none of the patients showed relapse. Increasing the dose of tigecycline could be considered as a means to better attain pharmacodynamic targets in patients with severe or difficult-to-treat infections. Tigecycline at high maintenance dose might be useful when retention of the implant is attempted for treatment for prosthetic joint infections due to multidrug resistant Acinetobacter. Although this approach might be promising, off-label use of tigecycline should be interpreted cautiously until prospective data are available. Tigecycline is probably under-dosed for the treatment of implant and biofilm associated infections.
Acinetobacter baumannii ; Acinetobacter* ; Anti-Bacterial Agents ; Arthroplasty, Replacement, Hip ; Biofilms ; Debridement* ; Hospitalization ; Humans ; Informed Consent ; Joints* ; Microbial Sensitivity Tests ; Minocycline ; Off-Label Use ; Prospective Studies ; Prostheses and Implants ; Prosthesis Retention ; Recurrence ; Retrospective Studies

PURPOSE: The purpose of this study was to evaluate the influence of tightening technique and the screw coating on the loosening torque of screws used for Universal Abutment fixation after cyclic loading. MATERIALS AND METHODS: Forty implants (Titamax Ti Cortical, HE, Neodent) (n=10) were submerged in acrylic resin and four tightening techniques for Universal Abutment fixation were evaluated: A - torque with 32 Ncm (control); B - torque with 32 Ncm holding the torque meter for 20 seconds; C - torque with 32 Ncm and retorque after 10 minutes; D - torque (32 Ncm) holding the torque meter for 20 seconds and retorque after 10 minutes as initially. Samples were divided into subgroups according to the screw used: conventional titanium screw or diamond like carbon-coated (DLC) screw. Metallic crowns were fabricated for each abutment. Samples were submitted to cyclic loading at 106 cycles and 130 N of force. Data were analyzed by two-way ANOVA and Tukey's test (5%). RESULTS: The tightening technique did not show significant influence on the loosening torque of screws (P=.509). Conventional titanium screws showed significant higher loosening torque values than DLC (P=.000). CONCLUSION: The use of conventional titanium screw is more important than the tightening techniques employed in this study to provide long-term stability to Universal Abutment screws.
Crowns ; Dental Implants, Single-Tooth ; Dental Prosthesis Retention ; Dental Prosthesis, Implant-Supported ; Diamond ; Prosthesis Failure ; Titanium ; Torque*

OBJECTIVETo evaluate the effect of different auxiliary resistance forms on the resistance and marginal fitness of complete crowns for short molar preparations.

METHODSA total of 70 Nissin resin teeth were prepared with 20° total occlusal convergence, 2.5 mm of occlusocervical height, and a shallow finish line on a milling machine. The milled preparations were then randomly assigned to 7 groups of 10. The first group was used as the control group. A total of 30 dies were modified by preparing interproximal grooves with angles of 0°, 6°, and 20° centered on the mesial and distal surfaces of the dies. The rest of the teeth were prepared with occlusal holes in the center of the occlusal surface milled with the same burs to form 0°, 6°, and 20° holes. Cobalt-chromium copings were fabricated for all specimens. The marginal gap of specific points on the axial surface was measured before and after cementation. The resistance of each specimen was evaluated by applying an external force at an angle of 45° to the long axis of the die by using a universal testing machine in a lingual to buccal direction. The maximum force applied before crown dislodgement was measured. Data were analyzed using the SAS 9.2 software.

RESULTSThe results showed that the 0° groove, 0° hole, and 6° hole were effective in improving the resistance of the complete crowns (P<0.05). The 0° groove, 6° groove, 0° hole, 6° hole, and 20° hole had significant difference with the control group in terms of marginal discrepancies (P<0.05).

CONCLUSIONAuxiliary resistance forms with less degree indicate greater resistance force but worse marginal fitness. In clinical practice, if the resistance of a preparation is enough, the auxiliary resistance forms should be avoided from being used.