OBJECTIVE: To explore the feasibility of preparing different doses of tablets for personalized treatment by fused deposition modeling (FDM) 3D printing technology, and to evaluate the in vitro quality of the FDM 3D printed tablets. METHODS: Three different sizes of hollow tablets were prepared by fused deposition modeling 3D printing technology with polyvinyl alcohol (PVA) filaments. Theophylline was chosen as the model drug. In the study, 20 mg, 50 mg and 100 mg of theophylline was filled into the cavity of the tablets, respectively. The microscopic morphology of the tablets was observed by scanning electron microscopy (SEM). The weight variation of the tablets was investigated by weighing method. The hardness of the tablets was measured by tablet hardness tester. The contents of the drugs in the tablets were determined by ultraviolet and visible spectrophotometry (UV-Vis), and the dissolution apparatus was used to assay the in vitro drug release of the tablets. RESULTS: The prepared FDM 3D printed tablets were all in good shape without printing defects. And there was no leakage phenomenon. The diameter and thickness of the tablets were consistent with the design. The layers were tightly connected, and the fine structure of the formulation could be clearly observed without printing defects by scanning electron microscopy. The average weight of the three sizes of tablets was (150.5±2.3) mg, (293.6±2.6) mg and (456.2±5.6) mg, respectively. The weight variation of the three sizes of tablets were boss less than 5%, which met the requirements; The hardness of the tablets all exceeded 200 N; The contents of theophylline in the three tablets were 98.0%, 97.2% and 97.9% of the dosage (20 mg, 50 mg and 100 mg), and the relative standard deviation (RSD) was 1.06%, 1.15% and 0.63% respectively; The time for 80% drug released from the three dosage of tablets was within 30 min. CONCLUSION Three different dosages of theophylline tablets were successfully prepared by FDM 3D printing technology in this study. The exploration may bring beneficial for the preparation of personalized dose preparations. We expect that with the development of 3D printing technology, FDM 3D printed personalized tablets can be used in the clinic as soon as possible to provide personalized treatment for patients.
Humans ; Theophylline/chemistry* ; Tablets/chemistry* ; Drug Liberation ; Printing, Three-Dimensional ; Polyvinyl Alcohol/chemistry* ; Technology, Pharmaceutical/methods*

Using three-dimensional printing to produce antibacterial wound dressing is a new topic that will change the production style of wound dressing industry. Combining with post-3D-printed process, a desktop fused deposition molding equipment can be used to produce wound dressing containing polyvinyl alcohol, alginate and chitosan. The wound dressing produced by FDM has good aspects of absorbency, moisture vapour transmission rate and mechanical property. After loaded with antibacterial agent iodine and silver nano particle, the antibacterial activity rate increases to 99% and it is suitable to use as antibacterial wound dressing. This method affects the production of wound dressing to a more cost-effective way, and provides a possible individualized treatment for patient in the future.
Alginates ; chemistry ; Anti-Bacterial Agents ; administration & dosage ; Bacteria ; drug effects ; Bandages ; economics ; standards ; Chitosan ; chemistry ; Humans ; Iodine ; administration & dosage ; pharmacology ; Nanoparticles ; administration & dosage ; Polyvinyl Alcohol ; chemistry ; Printing, Three-Dimensional ; Silver ; administration & dosage ; pharmacology ; Wound Healing

This study aims to investigate the preparation process and in vitro release behavior of artesunate polylactic acid microspheres, in order to prepare an artesunate polylactic acid (PLA) administration method suitable for hepatic arterial embolization. With PLA as the material and polyvinyl alcohol (PVA) as the emulsifier, O/W emulsion/solvent evaporation method was adopted to prepare artesunate polylactic acid microspheres, and optimize the preparation process. With drug loading capacity, encapsulation efficiency and particle size as indexes, a single factor analysis was made on PLA concentration, PVA concentration, drug loading ratio and stirring velocity. Through an orthogonal experiment, the optimal processing conditions were determined as follows: PLA concentration was 9. 0% , PVA concentration was 0. 9% , drug loading ratio was 1:2 and stirring velocity was 1 000 r x min(-1). According to the verification of the optimal process, microsphere size, drug loading and entrapment rate of artesunate polylactic acid microspheres were (101.7 +/- 0.37) microm, (30.8 +/- 0.84)%, (53.6 +/- 0.62)%, respectively. The results showed that the optimal process was so reasonable and stable that it could lay foundation for further studies.
Artemisinins ; chemistry ; Calibration ; Drug Compounding ; methods ; Lactic Acid ; chemistry ; Microspheres ; Polyesters ; Polymers ; chemistry ; Polyvinyl Alcohol ; chemistry

Lower gastrointestinal haemorrhage due to enteric fever is uncommon and potentially fatal. The majority of patients recover with conservative treatment, with surgery reserved for life-threatening bleeding. Given the advances in radiologically guided procedures, there have been numerous reports of successful embolisation for gastrointestinal haemorrhage, although few of these involved enteric fever as the causative agent. We report an uncommon case of haemorrhagic enteric fever treated successfully with embolisation using polyvinyl alcohol particles and coils.
Adult ; Angiography ; Embolization, Therapeutic ; instrumentation ; methods ; Female ; Gastrointestinal Hemorrhage ; therapy ; Humans ; Polyvinyl Alcohol ; chemistry ; Tomography, X-Ray Computed ; Treatment Outcome ; Typhoid Fever ; therapy

The objective of this investigation was to study the characteristics and biocompatibility of collagen/polyvinyl alcohol (PVA) membrane crosslinked by UV-riboflavin. Membranes that were made into complex ones with different mass ratios of collagen to PVA (1:1 and 2:1) were synthesized, and crosslinked with UV-riboflavin. The surface characteristics were analyzed using the omnipotent materials instrument, IR, SEM, water absorption test, gas permeability test, and degradation test, respectively. The biocompatibility of membrane complex and rat bone marrow mesenchymal stem cells (BMSCs) was evaluated after 7 d and 14 d, respectively. The collagen/PVA complex membranes showed good homogeneity, mechanical property, degradation ratio, water absorption, gas permeability, etc. The biocompatibility of the collagen/PVA (2:1) complex membrane crosslinked with UV-Riboflavin was higher than that of without crosslinking and collagen/PVA (1:1) membrane. It could be well concluded that collagen/PVA complex membranes crosslinked with UV-riboflavin would have a potential application in biomedicine.
Animals ; Biocompatible Materials ; chemistry ; Collagen ; chemistry ; Cross-Linking Reagents ; chemistry ; Materials Testing ; Membranes, Artificial ; Mesenchymal Stromal Cells ; cytology ; drug effects ; Polyvinyl Alcohol ; chemistry ; Rats ; Riboflavin ; chemistry ; Tissue Engineering ; methods ; Ultraviolet Rays

OBJECTIVETo fabricate polyvinyl alcohol (PVA)/chitosan hybrid nanofibrous scaffolds owning the similar physiological structure of ECM, and to observe its biodegradation behavior in vivo and in vitro.

METHODS(1) The PVA nanofibrous scaffold and PVA/chitosan hybrid nanofibrous scaffold were fabricated by electrospinning technique, and then they were crosslinked by glutaraldehyde vapor method. The morphology of both scaffolds was observed by scanning electron microscope (SEM). (2) Biodegradation experiment in vitro: the samples of two scaffolds with size of 2 cm x 2 cm were placed into phosphate-buffer saline (PBS) fluid under 37.0 degrees C water for incubation, and then they were dried to observe morphologic changes under SEM on post incubation day (PID) 3, 7, and 14. (3) Biodegradation experiment in vivo: 48 Wistar rats were divided into PVA group and PVA/chitosan group according to the random number table, with 24 rats in each group. PVA or PVA/chitosan nanofibrous scaffold was implanted into subcutaneous tissue on both sides of back in rats of both groups, with 4 scaffolds in each rat. The scaffold samples were harvested to observe morphologic changes with HE staining on post operation day (POD) 3, 7, 14, and 28.

RESULTS(1) After crosslinking, the surface of fibers in PVA and PVA/chitosan hybrid nanofibrous scaffolds were smooth, and the diameters of fibers were similar, ranging from 200 to 300 nm, with high porosity. (2) Biodegradation experiment in vitro showed that the morphologic changes in fiber was respectively swelling, dissolution, fusion in PVA nanofibrous scaffold on PID 3, 7, 14, and that in PVA/chitosan hybrid nanofibrous scaffold was respectively swelling, dissolution and fragmentation, and disappearance. (3) Biodegradation experiment in vivo showed that the morphologic changes in scaffold structure was respectively loosening, fuzziness of edges, degradation, and disappearance in PVA group and PVA/chitosan group on POD 3, 7, 14, 28.

CONCLUSIONSPVA/chitosan hybrid nanofibrous scaffolds can be prepared with electrospinning technique, and it has an appropriate biodegradation rate compatible with tissue reconstruction after crosslinking.

Animals ; Biocompatible Materials ; Cells, Cultured ; Chitosan ; chemical synthesis ; chemistry ; Materials Testing ; Polyvinyl Alcohol ; chemical synthesis ; chemistry ; Rats ; Rats, Wistar ; Tissue Engineering ; methods ; Tissue Scaffolds

In order to prepare and apply the polyvinyl alcohol/drug-loaded chitosan microspheres composite wound dressing, we first prepared chitosan microspheres by emulsion cross-linking method, and then added chitosan microspheres into the reactants during the acetalization of polyvinyl alcohol and formaldehyde. We further studied the morphology, water absorption, swelling degree, mechanical properties and in vitro release of the sponge with different amount of chitosan microspheres. The results showed that polyvinyl alcohol/drug-loaded chitosan composite sponge has porous structure with connectionism. Increasing the amount of chitosan microspheres would make the apertures smaller, so that the water absorption and the swelling of sponge decreased, but the tensile strength and compressive strength increased. With the increase of the amount of chitosan microspheres, the drug absorption of cefradine and the release rate increase, and the release time become longer. With the results of toxicity grade of 0 to 1, this type of composite sponge is non-toxic and meets the requirement of biocompatibility. The observation of rabbit nasal cavity after surgical operation suggested that polyvinyl acetal sponge modified with the chitosan has antiphlogistic, hemostatic and non-adherent characteristic, and can promote the healing and recovering of the nasalmucosa. After using this composite material, best growing surroundings for patients' granulation tissue were provided. Exposed bone and tendon were covered well with granulation tissue.
Animals ; Bandages ; Chitosan ; chemistry ; Drug Carriers ; chemistry ; Female ; Male ; Microspheres ; Nasal Cavity ; injuries ; Polyvinyl Alcohol ; chemistry ; Rabbits ; Wound Healing ; Wounds and Injuries ; pathology ; therapy

Nano-scale particles of silk fibroin peptide (SFP) were prepared from discarded materials of cocoon or filature by dissolving and enzymolysis. Polyvinyl Alcohol films inlaid with silk fibroin peptide nano-scale particles (SFP in PVA) were prepared by blending nano-SFP and PVA in water according to different blending ratios. The films' characteristics and their promoting cell growth functions were investigated. Silk fibroin fiber was dissolved in 60% NaSCN solution, and was decomposed with alpha-Chymotrypsin, Trypsin and Neutral, respectively. The uniformity of size of SFP nano-particles prepared by Neutral was better and appeared about 80-150 nm. (SFP in PVA) films were characterized by infrared spectroscopy (IR) measurement which demonstrated the combination of SFP and PVA. Scanning electron microscopy revealed the PVA films already inlaid with SFP micro-segment. The surface and form stability in water of the (SFP in PVA) films with blending ratios of 10/90, 20/80, 30/70 and 40/60 were observed. And the results showed that SFP/PVA film with the blending ratio of 30/70 has smoother surface and better stability in water. The Chinese hamster ovary (CHO) cells were cultured, and the promoting cell growth function of (SFP in PVA) films was assessed by MTT colorimetric assay. These findings indicate that SFP/PVA (30/70) film has excellent function of promoting cell growth.
Animals ; CHO Cells ; cytology ; Cell Proliferation ; drug effects ; Cricetinae ; Cricetulus ; Fibroins ; chemistry ; Membranes, Artificial ; Nanoparticles ; chemistry ; Peptides ; chemistry ; Polyvinyl Alcohol ; chemistry

Porous HA ceramics were prepared by using NH4 HCO3/PVA as pore-formed material along with biological glass as intensifier, and these ceramics were immersed in Locke's Physiological Saline and Simulate Body Fluid (SBF). The changes of phase composition, grain size and crystallinity of porous HA ceramics before and after immersion were investigated by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The biological activity was evaluated. The porous HA ceramics showed various degrees of decomposition after immersion in the two solution systems, but there was no evident change in respect to crystallinity. Besides, the impact of different degrees of solution systems on the change of grain size and planar preferred orientation was observed. The TCP phase of the ceramics immersed in Locke's Physiological Saline decomposed and there was no crystal growth on the surface of ceramics; however, the grain size of ceramics immersed in SBF became refined in certain degree and the surface of ceramics took on the new crystal growth.
Bicarbonates ; chemistry ; Biomimetic Materials ; chemical synthesis ; chemistry ; Ceramics ; chemical synthesis ; chemistry ; Durapatite ; chemical synthesis ; chemistry ; Polyvinyl Alcohol ; chemistry ; Porosity

In view of the problems that conventional artificial cartilages have no bioactivity and are prone to peel off in repeated uses as a result of insufficient strength to bond with subchondral bone, we have designed and prepared a novel kind of PVA-BG composite hydrogel as bionic artificial articular cartilage/bone composite implants. The effects of processes and conditions of preparation on the mechanical properties of implant were explored. In addition, the relationships between compression strain rate, BG content, PVA hydrogels thickness and compressive tangent modulus were also explicated. We also analyzed the effects of cancellous bone aperture, BG and PVA content on the shear strength of bonding interface of artificial articular cartilage with cancellous bone. Meanwhile, the bonding interface of artificial articular cartilage and cancellous bone was characterized by scanning electron microscopy. It was revealed that the compressive modulus of composite implants was correspondingly increased with the adding of BG content and the augments of PVA hydrogel thickness. The compressive modulus and bonding interface were both related to the apertures of cancellous bone. The compressive modulus of composite implants was 1.6-2.23 MPa and the shear strength of bonding interface was 0.63-1.21 MPa. These results demonstrated that the connection between artificial articular cartilage and cancellous bone was adequately firm.
Biocompatible Materials ; chemistry ; Biomimetic Materials ; chemistry ; Bone Substitutes ; chemical synthesis ; chemistry ; Cartilage, Articular ; physiology ; surgery ; Compressive Strength ; Humans ; Hydrogel, Polyethylene Glycol Dimethacrylate ; chemistry ; Polyvinyl Alcohol ; chemistry ; Prostheses and Implants ; Prosthesis Design ; Stress, Mechanical