This review article summarizes the current modification methods employed to enhance the osseointegration properties of polyetheretherketone (PEEK), a novel biomaterial. Our analysis highlights that strategies such as surface treatment, surface modification, and the incorporation of bioactive composites can markedly improve the bioactivity of PEEK surfaces, thus facilitating their effective integration with bone tissue. However, to ensure widespread application of PEEK in the medical field, particularly in oral implantology, additional experiments and long-term clinical evaluations are required. Looking ahead, future research should concentrate on developing innovative modification techniques and assessment methodologies to further optimize the performance of PEEK implant materials. The ultimate goal is to provide the clinical setting with even more reliable solutions.
Benzophenones ; Ketones/chemistry* ; Polyethylene Glycols/chemistry* ; Osseointegration ; Humans ; Polymers ; Biocompatible Materials/chemistry* ; Surface Properties ; Prostheses and Implants ; Dental Implants

OBJECTIVE: To investigate the biological activity and antitumor effect of pegylated recombinant human interleukin 2 (PEG-rhIL-2) obtained by site-specific conjugation of polyethylene glycol (PEG) with non-natural amino acids, and to explore its antitumor mechanism. METHODS: The binding activities of PEG-rhIL-2 at three different sites (T41, Y45, and V91) to human interleukin 2 receptors α (IL-2R_α) and β (IL-2R_β) and were detected by surface plasmon resonance (SPR) technology. Western blot was used to detect the levels of the Janus kinase-signal transducer and activator of transcription 5 (JAK-STAT5) signaling pathway activated by different doses of rhIL-2 and PEG-rhIL-2 in CTTL-2 and YT cells. Blood was collected after a single administration in mice to detect the drug concentration at different time points and evaluate the pharmacokinetic parameters of Y45-PEG-rhIL-2. Mouse hepatoma cell line Hepa1-6, pancreatic cancer cell line Pan-02, and colon cancer cell line MC-38 were selected. Tumor models were constructed in C57BL/6 mice. Different doses of Y45-PEG-rhIL-2 and excipient control were administrated respectively to evaluate the tumor suppression effect of the drug. In the MC-38 colon cancer model, the tumor suppression effect of Y45-PEG-rhIL-2 combined with anti-programmed death-1 (PD-1) monoclonal antibody was evaluated. Hepa1-6 mouse tumor models were constructed and rhIL-2, Y45-rhIL-2 and Y45-PEG-rhIL-2 were administrated respectively. The proportion of tumor-infiltrating lymphocytes was analyzed by flow cytometry. RESULTS: The SPR detection results showed that the binding activities of PEG-rhIL-2 to IL-2R_α/IL-2R_β were both reduced. The affinity of Y45-PEG-rhIL-2 to IL-2R_α was reduced to approximately 1/250, and its affinity to IL-2R_β was reduced to 1/3. Western blot results showed that the activity of Y45-PEG-rhIL-2 in stimulating JAK-STAT5 signaling in CTLL-2 cells expressing heterotrimeric IL-2 receptor complex IL-2R_αβγwas reduced to approximately 1/300, while its activity in YT cells expressing heterodimeric IL-2 receptor complex IL-2R_βγwas reduced to approximately 1/3. The pharmacokinetic evaluation after a single dose in the mice showed that the elimination half-life of Y45-PEG-rhIL-2 was 17.7 h. Y45-PEG-rhIL-2 has pharmacokinetic characteristics superior to those of rhIL-2. Y45-PEG-rhIL-2 showed dose-dependent tumor suppression activity, and the combination of Y45-PEG-rhIL-2 and anti-PD-1 antibody had a better tumor-inhibiting effect than the single use of Y45-PEG-rhIL-2 or anti-PD-1 antibody. Flow cytometry analysis demonstrated that 72 h after the administration of Y45-PEG-rhIL-2, the proportion of tumor-infiltrating cytotoxic T lymphocytes (CD8⁺T cells) increased by 86.84%. At 120 h after administration, the ratio of CD8⁺T cells to regulatory T cells (Treg) increased by 75.10%. CONCLUSION Y45-PEG-rhIL-2 obtained by site-specific conjugation via non-natural amino acids changed its receptor binding activity and inhibited tumor growth in dose-dependent manner in multiple tumor models by regulating CD8⁺T cells.
Interleukin-2/pharmacokinetics* ; Animals ; Mice ; Humans ; Recombinant Proteins/pharmacology* ; Polyethylene Glycols/chemistry* ; Cell Line, Tumor ; Antineoplastic Agents/pharmacokinetics* ; Signal Transduction/drug effects* ; STAT5 Transcription Factor/metabolism* ; Interleukin-2 Receptor alpha Subunit/metabolism* ; Interleukin-2 Receptor beta Subunit/metabolism*

OBJECTIVES: The application of photodynamic therapy in solid tumors has attracted increasing attention in recent years, and the efficiency of photosensitizers is a crucial determinant of therapeutic efficacy. This study aims to evaluate the cytotoxic effects of a novel photosensitizer, PEG-MTPABZ-PyC, in photodynamic therapy against gastric cancer cells. METHODS: Gastric cancer MKN45 cells were treated with PEG-MTPABZ-PyC. A high-content live-cell imaging system was used to assess the cellular uptake kinetics and subcellular localization of the photosensitizer. The cytotoxic effects of PEG-MTPABZ-PyC-mediated photodynamic therapy were examined using the cell counting kit-8 (CCK-8) assay and flow cytometry, while the intrinsic cytotoxicity of the photosensitizer alone was verified by the CCK-8 assay. Intracellular reactive oxygen species (ROS) generation after photodynamic therapy was detected using 2'-7'-dichlorodihydrofluorescein diacetate (DCFH-DA). RESULTS: PEG-MTPABZ-PyC alone exhibited no cytotoxicity toward MKN45 cells, indicating excellent cytocompatibility. The compound efficiently entered cells within 6 hours and localized predominantly in lysosomes. Upon light irradiation, PEG-MTPABZ-PyC-mediated photodynamic therapy induced significant cytotoxicity compared with the control group (P<0.05) and generated abundant intracellular ROS. CONCLUSIONS The novel photosensitizer PEG-MTPABZ-PyC demonstrates potent photodynamic cytotoxicity against gastric cancer cells, showing promising potential for further development in gastric cancer photodynamic therapy.
Humans ; Stomach Neoplasms/drug therapy* ; Photochemotherapy/methods* ; Photosensitizing Agents/pharmacology* ; Cell Line, Tumor ; Polyethylene Glycols/chemistry* ; Reactive Oxygen Species/metabolism* ; Mesoporphyrins/pharmacology*

OBJECTIVES: This study investigated the effects of a polycaprolactone (PCL)-polyethylene glycol (PEG) scaffold incorporated with concentrated growth factor (CGF) on the adhesion, proliferation, and osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs). METHODS: The PCL-PEG-CGF composite scaffold was fabricated using an immersion and freeze-drying technique. Its microstructure, mechanical properties, and biocompatibility were systematically characterized. The hPDLSCs were isolated through enzymatic digestion, and the hPDLSCs were identified through flow cytometry. Third-passage hPDLSCs were seeded onto the composite scaffolds, and their adhesion, proliferation and osteogenic differentiation were assessed using CCK-8 assays, 4',6-diamidino-2-phenylindole (DAPI) staining, alkaline phosphatase (ALP) staining, alizarin red staining, and Western blot analysis of osteogenesis-related proteins [Runt-related transcription factor 2 (Runx2), ALP, and morphogenetic protein 2 (BMP2)]. RESULTS: Scanning electron microscopy revealed that the PCL-PEG-CGF composite scaffold exhibited a honeycomb-like structure with heterogeneous pore sizes. The composite scaffold exhibited excellent hydrophilicity, as evidenced by a contact angle (θ) approaching 0° within 6 s. Its elastic modulus was measured at (4.590 0±0.149 3) MPa, with comparable hydrophilicity, fracture tensile strength, and fracture elongation to PCL-PEG scaffold. The hPDLSCs exhibited significantly improved adhesion to the PCL-PEG-CGF composite scaffold compared with the PCL-PEG scaffold (P<0.01). Additionally, cell proliferation was markedly improved in all the experimental groups on days 3, 5, and 7 (P<0.01), and statistically significant differences were found between the PCL-PEG-CGF group and other groups (P<0.01). The PCL-PEG-CGF group showed significantly elevated ALP activity (P<0.05), increased mineralization nodule formation, and upregulated expression of osteogenic-related proteins (Runx2, BMP2 and ALP; P<0.05). CONCLUSIONS The PCL-PEG-CGF composite scaffold exhibited excellent mechanical properties and biocompatibility, enhancing the adhesion and proliferation of hPDLSCs and promoting their osteogenic differentiation by upregulating osteogenic-related proteins.
Humans ; Polyesters/chemistry* ; Periodontal Ligament/cytology* ; Polyethylene Glycols/chemistry* ; Stem Cells/cytology* ; Tissue Scaffolds ; Cell Proliferation ; Osteogenesis ; Cell Differentiation ; Cell Adhesion ; Bone Morphogenetic Protein 2/metabolism* ; Cells, Cultured ; Alkaline Phosphatase/metabolism* ; Core Binding Factor Alpha 1 Subunit/metabolism* ; Intercellular Signaling Peptides and Proteins/pharmacology* ; Tissue Engineering/methods*

With the continuous exploration of microemulsions as solvents for traditional Chinese medicine extraction, polyoxyethy-lene(35) castor oil(CrEL), a commonly used surfactant, is being utilized by researchers. However, the problem of detecting residues of this surfactant in microemulsion extracts has greatly hampered the further development of microemulsion solvents. Based on the chemical structures of the components in CrEL and the content determination method of castor oil in the 2020 edition of the Chinese Pharmacopoeia(Vol. Ⅳ), this study employed gas chromatography(GC) and single-factor experiments to optimize the preparation method of methyl ricinoleate from CrEL. The conversion coefficient between the two was validated, and the optimal sample preparation method was used to process microemulsion extracts of Zexie Decoction from three batches. The content of methyl ricinoleate generated was determined, and the content of CrEL in the microemulsion extracts of Zexie Decoction was calculated using the above conversion coefficient. The results showed that the optimal preparation method for CrEL was determined. Specifically, 10 mL of 1 mol·L~(-1) KOH-methanol solution was heated at 60 ℃ for 15 min in a water bath. Subsequently, 10 mL of boron trifluoride etherate-methanol(1∶3) solution was heated at 60 ℃ for 15 min in a water bath, followed by extraction with n-hexane twice. CrEL could stably produce 20.84% methyl ricinoleate. According to this conversion coefficient, the average mass concentration of CrEL in the three batches of Zexie Decoction microemulsion extracts was 11.94 mg·mL~(-1), which was not significantly different from the CrEL mass concentration of 11.57 mg·mL~(-1) during microemulsion formulation, indicating that the established content determination method of this study was highly accurate, sensitive, and repeatable. It can be used for subsequent research on microemulsion extracts of Zexie Decoction and provide a reference for quality control of other drug formulations containing CrEL.
Polyethylene Glycols/chemistry* ; Castor Oil ; Methanol ; Surface-Active Agents/chemistry* ; Solvents ; Water/chemistry* ; Emulsions/chemistry*

Soft tissue is an indispensable tissue in human body. It plays an important role in protecting the body from external physical, chemical or biological factors. Mild soft tissue injuries can self-heal, while severe soft tissue injuries may require related treatment. Natural polymers (such as chitosan, hyaluronic acid, and collagen) and synthetic polymers (such as polyethylene glycol and polylactic acid) exhibit good biocompatibility, biodegradability and low toxicity. It can be used for soft tissue repairs for antibacterial, hemostatic and wound healing purposes. Their related properties can be enhanced through modification or preparation of composite materials. Commonly used soft tissue repairs include wound dressings, biological patches, medical tissue adhesives, and tissue engineering scaffolds. This study introduces the properties, mechanisms of action and applications of various soft tissue repair medical materials, including chitosan, hyaluronic acid, collagen, polyethylene glycol and polylactic acid, and provides an outlook on the application prospects of soft tissue repair medical materials and products.
Humans ; Biocompatible Materials/chemistry* ; Chitosan/chemistry* ; Hyaluronic Acid ; Tissue Scaffolds/chemistry* ; Collagen/chemistry* ; Polymers/chemistry* ; Polyethylene Glycols ; Soft Tissue Injuries

Polyetheretherketone (PEEK) is a polymer material composed of aromatic rings connected by ether and ketone groups. It has advantages of excellent biocompatibility, stable chemical properties, and appropriate elasticity modulus. Since PEEK are increasingly used in dentistry in recent years, the properties, modification methods, and research advances of them in oral implantology were discussed in this review.
Dental Implants ; Polymers ; Ketones/chemistry* ; Polyethylene Glycols/chemistry* ; Ethers

The present study prepared a new type of Ginkgo biloba ketone ester(GBE50) preparation from polyethylene glycol and croscarmellose sodium with good biocompatibility and a certain viscosity by fused deposition modeling(FDM)-type 3D printing technique. Firstly, a cylindrical 3D printing model with a diameter of 9.00 mm and a height of 4.50 mm was established. Subsequently, the 3D-GBE50 preparations with three paths(concentric, zigzag, and grid), different layer heights, and different filling gaps were designed and prepared after the optimization of the proportions of excipients. The morphology, size, chemical properties, and dissolution activity of the 3D-GBE50 preparations were fully characterized and investigated. The results showed that 3D-GBE50 preparations had smooth appearance, clear texture, standard friability, good thermal stability, and stable chemical properties. Moreover, the printing path, layer height, and filling gap were directly related to the release rate of 3D-GBE50 preparations. The dissolution of 3D-GBE50 tablets with zigzag printing path was the fastest, while the dissolution rates of 3D-GBE50 tablets with concentric circle and grid-shaped printing paths were slower than that of commercially available G. biloba Ketone Ester Tablets. In addition, the dissolution of 3D-GBE50 tablets was faster with higher layer height and wider filling gap. As revealed by the results, th FDM-type 3D printing technique can flexibly regulate the drug release activity via controlling the printing parameters, providing effective ideas and methods for the pre-paration of personalized pharmaceutical preparations.
Carboxymethylcellulose Sodium ; Esters ; Excipients/chemistry* ; Ginkgo biloba ; Ketones ; Polyethylene Glycols/chemistry* ; Printing, Three-Dimensional ; Tablets/chemistry* ; Technology, Pharmaceutical/methods*

Polymer micelles formed by self-assembly of amphiphilic polymers are widely used in drug delivery, gene delivery and biosensors, due to their special hydrophobic core/hydrophilic shell structure and nanoscale. However, the structural stability of polymer micelles can be affected strongly by environmental factors, such as temperature, pH, shear force in the blood and interaction with non-target cells, leading to degradations and drug leakage as drug carriers. Therefore, researches on the structural integrity and in vivo distribution of micelle-based carriers are very important for evaluating their therapeutic effect and clinical feasibility. At present, fluorescence resonance energy transfer (FRET) technology has been widely used in real-time monitoring of aggregation, dissociation and distribution of polymer micelles ( in vitro and in vivo). In this review, the polymer micelles, characteristics of FRET technology, structure and properties of the FRET-polymer micelles are briefly introduced. Then, methods and mechanism for combinations of several commonly used fluorescent probes into polymer micelles structures, and progresses on the stability and distribution studies of FRET-polymer micelles ( in vitro and in vivo) as drug carriers are reviewed, and current challenges of FRET technology and future directions are discussed.
Micelles ; Drug Carriers/chemistry* ; Polymers/chemistry* ; Fluorescence Resonance Energy Transfer ; Polyethylene Glycols/chemistry*

Carbon nanotube (CNT) composite materials are very attractive for use in neural tissue engineering and biosensor coatings. CNT scaffolds are excellent mimics of extracellular matrix due to their hydrophilicity, viscosity, and biocompatibility. CNTs can also impart conductivity to other insulating materials, improve mechanical stability, guide neuronal cell behavior, and trigger axon regeneration. The performance of chitosan (CS)/polyethylene glycol (PEG) composite scaffolds could be optimized by introducing multi-walled CNTs (MWCNTs). CS/PEG/CNT composite scaffolds with CNT content of 1%, 3%, and 5% (1%=0.01 g/mL) were prepared by freeze-drying. Their physical and chemical properties and biocompatibility were evaluated. Scanning electron microscopy (SEM) showed that the composite scaffolds had a highly connected porous structure. Transmission electron microscope (TEM) and Raman spectroscopy proved that the CNTs were well dispersed in the CS/PEG matrix and combined with the CS/PEG nanofiber bundles. MWCNTs enhanced the elastic modulus of the scaffold. The porosity of the scaffolds ranged from 83% to 96%. They reached a stable water swelling state within 24 h, and swelling decreased with increasing MWCNT concentration. The electrical conductivity and cell adhesion rate of the scaffolds increased with increasing MWCNT content. Immunofluorescence showed that rat pheochromocytoma (PC12) cells grown in the scaffolds had characteristics similar to nerve cells. We measured changes in the expression of nerve cell markers by quantitative real-time polymerase chain reaction (qRT-PCR), and found that PC12 cells cultured in the scaffolds expressed growth-associated protein 43 (GAP43), nerve growth factor receptor (NGFR), and class III β‍-tubulin (TUBB3) proteins. Preliminary research showed that the prepared CS/PEG/CNT scaffold has good biocompatibility and can be further applied to neural tissue engineering research.
Animals ; Axons ; Biocompatible Materials/chemistry* ; Chitosan/chemistry* ; Nanotubes, Carbon/chemistry* ; Nerve Regeneration ; Polyethylene Glycols ; Porosity ; Rats ; Tissue Engineering/methods* ; Tissue Scaffolds/chemistry*