External fixation devices are essential tools in the field of foot and ankle reconstruction. Mastering the fundamental knowledge and skills of external fixation is crucial for the effective application of this technique. Currently, domestically produced external fixation systems for the foot and ankle can meet the needs of treating various foot and ankle traumas, deformities, and functional reconstruction. Through this special issue on "External fixation and foot and ankle reconstruction", we provide a detailed introduction to the essential knowledge and skills that physicians must acquire to proficiently manage external fixation and foot and ankle reconstruction.
Humans ; External Fixators ; Ankle Injuries/surgery* ; Plastic Surgery Procedures/methods* ; Foot Injuries/surgery* ; Fracture Fixation/instrumentation* ; Foot/surgery*

OBJECTIVE: To compare the effectiveness of using a composite loop plate to reconstruct the coracoclavicular ligament around the coracoid process and using a clavicular hook plate for fixation in treatment of Rockwood type Ⅲ acute acromioclavicular joint dislocation. METHODS: A retrospective analysis was conducted on the clinical data of 60 patients with Rockwood type Ⅲ acute acromioclavicular joint dislocation who were admitted between June 2022 and September 2023 and met the selection criteria. Among them, 30 patients were treated with the composite loop plate to reconstruct the coracoclavicular ligament around the coracoid process (loop plate group) and 30 with clavicular hook plate fixation (hook plate group). There was no significant difference in baseline data between the two groups ( P>0.05), including gender, age, injured side, cause of injury, disease duration, preoperative visual analogue scale (VAS) score for pain, and Constant-Murley score. The incision length, operation time, length of hospital stay, and the occurrence of complications during follow-up were recorded. The Constant-Murley score and VAS score were used to evaluate shoulder joint function and pain, and the differences (change values) of the indicators between before operation and at 6 months after operation were calculated for inter-group comparison. In the loop plate group, the coracoclavicular distance (CCD) on the anteroposterior X-ray films of the acromioclavicular joint was measured at 1 day and 6 months after operation to assess the loss of acromioclavicular joint reduction. RESULTS: The incision length of the loop plate group was significantly shorter than that of the hook plate group ( P<0.05). There was no significant difference in the operation time and the length of hospital stay between the two groups ( P>0.05). All incisions healed by first intention after operation. All patients were followed up 12-18 months (mean, 16.3 months). There was no significant difference in the follow-up time between groups ( P>0.05). The Constant-Murley scores and VAS scores of both groups significantly improved at 6 months after operation when compared with those before operation ( P<0.05); the differences in the change values of the two indicators between groups were significant ( P<0.05). The CCD of the loop plate group were (10.40±0.83) mm at 1 day and (10.70±0.68) mm at 6 months and no repositioning loss was observed. Three cases in the hook plate group had residual shoulder joint pain after operation. The difference in the accidence of complications between groups was not significant ( P>0.05). CONCLUSION For Rockwood type Ⅲ acute acromioclavicular joint dislocation, compared with the clavicular hook plate fixation, the composite loop plate for reconstructing the coracoclavicular ligament around the coracoid process has the advantages of simple operation, safety, minimally invasive, good functional recovery, and fewer complications. Moreover, it avoids the need for a second surgery to remove the internal fixation device, and the patient acceptance and satisfaction are higher.
Humans ; Acromioclavicular Joint/surgery* ; Bone Plates ; Male ; Retrospective Studies ; Female ; Adult ; Ligaments, Articular/injuries* ; Joint Dislocations/surgery* ; Coracoid Process/injuries* ; Treatment Outcome ; Middle Aged ; Plastic Surgery Procedures/instrumentation* ; Fracture Fixation, Internal/instrumentation* ; Young Adult ; Clavicle/surgery*

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

OBJECTIVETo compare the hemodynamic responses to orotracheal intubation with GlideScope videolaryngoscope (GSVL) and with fiberoptic bronchoscope (FOB) after induction of general anesthesia.

METHODSTotally 57 ASA physical status I - II adult patients undergoing elective plastic surgery and requiring orotracheal intubation were randomly allocated to either GSVL group (n = 29) or FOB group (n = 28). After a routine intravenous anesthetic induction, orotracheal intubation was performed. Noninvasive blood pressure (BP) and heart rate (HR) were recorded before and after anesthetic induction, at intubation and thereafter at 1 minute interval for 5 minutes.

RESULTSThe intubation time was not significantly different between the two groups (P > 0.05). After intubation, BP and HR exhibited significant increases compared to the post-induction values in both groups, but the maximum values of BP did not exceed the pre-induction values while the maximum value of HR was higher than the pre-induction value. During the observation, BP and HR at all time points as well as the maximum values of BP and HR had no significant differences between the two groups (P > 0.05).

CONCLUSIONThe orotracheal intubations using FOB and GSVL result in similar hemodynamic responses.

Adolescent ; Adult ; Anesthesia, General ; Blood Circulation ; Bronchoscopes ; Elective Surgical Procedures ; Fiber Optic Technology ; Heart Rate ; Humans ; Intubation, Intratracheal ; instrumentation ; Laryngoscopes ; Middle Aged ; Surgery, Plastic ; Video-Assisted Surgery ; instrumentation

OBJECTIVETo study the polypropylene mesh acted for the moulding and support.

METHODSFour mini-pigs were used in this experimental research. A polypropylene mesh was implanted under the skin on one side of each pig. An expander was thereafter placed in the deep layer to imitate the action of gravity to the skin and mesh. The specimens were collected in two different times for the biomechanics and histology examinations.

RESULTSThe biomechanical data were shown lower and the histological properties were found changeable in the expanded skin without the mesh support, compared with the normal skin. However, the changes did not occur in the expanded skin with the mesh support. Furthermore, the tensile strength and elastic modulus of the polypropylene mesh were significant less than the human skin.

CONCLUSIONThe Polypropylene mesh could prevent the extended skin effectively and has moulding and support effects.

Animals ; Breast ; surgery ; Dermatologic Surgical Procedures ; Mammaplasty ; instrumentation ; methods ; Models, Animal ; Polypropylenes ; Surgery, Plastic ; instrumentation ; methods ; Surgical Mesh ; Swine ; Treatment Outcome