Objective:To analyze the efficacy, influencing factors, and risk warning of multi-plane low-temperature plasma radiofrequency ablation（MLT-RFA） in the treatment of obstructive sleep apnea hypopnea syndrome（OSAHS）. Methods:A total of 118 OSAHS patients admitted from October 2022 to June 2024 were selected as the research subjects. They were divided into mild group（n=46）, moderate group（n=52）, and severe group（n=20） according to the severity of their condition. MLT-RFA treatment was used for all patients. After surgery, the results of polysomnography（PSG） and the changes in the Calier Sleep Apnea Quality of Life Index（SAQLI） were observed before and after treatment. The incidence of complications after treatment was recorded, and the clinical efficacy of the patients was evaluated. At the same time, they were divided into a treatment effective group（n=106） and an ineffective group（n=12） according to their effects. The general clinical data of the two groups were compared, and binary logistics regression analysis was conducted to identify independent factors that affect treatment efficacy and construct a model. ROC curve analysis was used to evaluate the diagnostic efficacy of the model. Results:The treatment effectiveness rate of the mild group was 93.48%, the moderate group was 90.38%, and the severe group was 80.00%. There was no statistically significant difference in the treatment effectiveness rate among the three groups（P>0.05）. The AHI of the mild group, moderate group, and severe group increased sequentially, while the LSaO2and SAQLI scores decreased sequentially. After treatment, the AHI of all three groups decreased compared to before treatment, while the LSaO2and SAQLI scores increased compared to before treatment, and the differences were statistically significant（P<0.05）. The pre-treatment AHI of the effective group was lower than that of the ineffective group, and the pre-treatment LSaO2and SAQLI were higher than those of the ineffective group, with statistically significant differences（P<0.05）. Pre-treatment LSaO2and pre-treatment SAQLI are independent factors affecting the efficacy of MLT-RFA（P<0.05）. The AUC of pre-treatment LSaO2, pre-treatment SAQLI, and combined prediction were 0.907, 0.763, and 0.947, respectively, with sensitivities of 0.896, 0.840, and 0.917, and specificities of 0.833, 0.667, and 0.887, respectively. Conclusion:MLT-RFA has a significant effect on the treatment of OSAHS, and the AHI, LSaO2, and SAQLI of patients before treatment can predict the treatment effect, with LSaO2 and SAQLI being independent influencing factors. The combinerd prediction model exhibits high diagnostic efficiency, sensitivity, and specificity.
Radiofrequency Ablation/methods* ; Plasma Gases ; Sleep Apnea, Obstructive/surgery* ; Polysomnography ; Postoperative Complications/epidemiology* ; Quality of Life ; Severity of Illness Index ; Treatment Outcome ; Humans

As a convenient and effective surface modification approach, non-thermal atmospheric pressure plasma (NTAPP)can be used to improve dentin bonding, and has recently become a research focus. Studies have shown that NTAPP can alter dentin surface properties, improve the penetration and polymerization of adhesives, stimulate the cross-linking of collagen, and change the micro-morphology and element content of dentin surface, thus improve the dentin bonding quality. This article introduces the current research progress in the application of NTAPP in the field of dentin bonding, in order to provide innovative information for future research in optimization of the quality of dentin bonding.
Dental Bonding ; Dental Cements ; Dentin ; Dentin-Bonding Agents ; Materials Testing ; Plasma Gases ; Resin Cements ; Surface Properties

PURPOSE: Direct application of atmospheric-pressure plasma jets (APPJs) has been established as an effective method of microbial decontamination. This study aimed to investigate the bactericidal effect of direct application of an APPJ using helium gas (He-APPJ) on Porphyromonas gingivalis biofilms on sandblasted and acid-etched (SLA) titanium discs. METHODS: On the SLA discs covered by P. gingivalis biofilms, an APPJ with helium (He) as a discharge gas was applied at 3 different time intervals (0, 3, and 5 minutes). To evaluate the effect of the plasma itself, the He gas–only group was used as the control group. The bactericidal effect of the He-APPJ was determined by the number of colony-forming units. Bacterial viability was observed by confocal laser scanning microscopy (CLSM), and bacterial morphology was examined by scanning electron microscopy (SEM). RESULTS: As the plasma treatment time increased, the amount of P. gingivalis decreased, and the difference was statistically significant. In the SEM images, compared to the control group, the bacterial biofilm structure on SLA discs treated by the He-APPJ for more than 3 minutes was destroyed. In addition, the CLSM images showed consistent results. Even in sites distant from the area of direct He-APPJ exposure, decontamination effects were observed in both SEM and CLSM images. CONCLUSIONS: He-APPJ application was effective in removing P. gingivalis biofilm on SLA titanium discs in an in vitro experiment.
Bacterial Load ; Biofilms ; Decontamination ; Helium ; In Vitro Techniques ; Methods ; Microbial Viability ; Microscopy, Confocal ; Microscopy, Electron, Scanning ; Plasma Gases ; Plasma ; Porphyromonas gingivalis ; Porphyromonas ; Stem Cells ; Titanium

OBJECTIVE: To investigate the effect of different treatment temperatures of a novel cold atmospheric plasma jet treatment on the resin-dentin bonding. METHODS: (1) Fifty-two freshly extracted, non-carious and intact third molars were collected. The occlusal one-third of the crown was removed by means of a water-cooled low-speed Isomet saw. One dentin disc [(900 ±100) μm] was prepared for each tooth. The fifty-two dentin discs were randomly divided into control group and experimental groups, of which four were in control group, and forty-eight were divided into four experimental groups according to the different treatment temperatures (4 °C, 10 °C, 20 °C and 30 °C) of the novel radio-frequency atmospheric-pressure glow discharge (RF-APGD) plasma jet, twelve in each group. Each experimental group was divided into three subgroups according to different treatment time (10 s, 20 s and 30 s), with four in each subgroup. The occlusal one-third of the crown was removed by means of a water-cooled low-speed Isomet saw. The morphology of demineralized dentin surfaces was analyzed using field emission scanning electron microscopy. (2) Twenty unerupted, non-carious and intact third molars were randomly divided into five groups, four in each group: control group, untreated; 4 °C, 10 °C, 20 °C and 30 °C experimental groups, each group was treated with the RF-APGD plasma jet for 20 s. The micro-tensile resin dentin bond strength was tested after 20 s RF-APGD plasma jet treatment with different temperatures, using a universal mechanical machine. RESULTS: (1) The field emission scanning electron microscopy results indicated that when compared with the control group, a 10 s RF-APGD plasma jet treatment with 30 °C and 20 °C collapsed the collagen scaffold. Collagen fibrils maintained an uncollapsed three-dimensional structure after the 4 °C RF-APGD plasma jet treatment for even 30 s treatment. (2) The microtensile resin dentin bond strength results of the 4 °C RF-APGD plasma jet treatment group (57.8±0.7) MPa were significantly higher than that of the control group [(47.4±0.5) MPa] and 10 s, 20 s and 30 s RF-APGD plasma treatment group [(51.9±0.7) MPa,(29.7±1.0) MPa and (22.2±1.5) MPa] with statistically significant difference (P<0.05). Compared with the control group, the micro-tensile bond strength increased about 21.9% and 9.5% after 4 °C and 10 °C RF-APGD plasma jet treatment, respectively. CONCLUSION Compared with other treatment temperatures, this novel RF-APGD plasma jet treatment with the temperature of 4 °C can preserve the three-dimensional morphology of demineralized dentin better, and can improve the resin-dentin bonding.
Composite Resins ; Dental Bonding ; Dentin ; Dentin-Bonding Agents ; Materials Testing ; Microscopy, Electron, Scanning ; Plasma Gases ; Resin Cements ; Temperature ; Tensile Strength

The aim of this study was to investigate the synergistic effect of cold atmospheric plasma (CAP) treatment and RGD peptide coating for enhancing cellular attachment and proliferation over titanium (Ti) surfaces. The surface structure of CAP-treated and RGD peptide-coated Ti discs were characterized by contact angle goniometer and atomic force microscopy. The effect of such surface modification on human bone marrow derived mesenchymal stem cells (hMSCs) adhesion and proliferation was assessed by cell proliferation and DNA content assays. Besides, hMSCs' adhesion and morphology on surface modified Ti discs were observed via fluorescent and scanning electron microscopy. RGD peptide coating following CAP treatment significantly enhanced cellular adhesion and proliferation among untreated, CAP-treated and RGD peptide-coated Ti discs. The treatment of Ti surfaces with CAP may contribute to improved RGD peptide coating, which enables increased cellular integrations with the Ti surfaces.
Bone Marrow ; Cell Proliferation ; DNA ; Humans ; Mesenchymal Stromal Cells ; Microscopy, Atomic Force ; Microscopy, Electron, Scanning ; Plasma ; Plasma Gases ; Titanium

Nonthermal atmospheric plasma has been studied for its many biomedical effects, such as tooth bleaching, wound healing, and coagulation. In this study, the effects of dentinal tubules occlusion were investigated using fluoride-carboxymethyl cellulose (F-CMC) gel, nano-sized hydroxyapatite (n-HA), and nonthermal atmospheric plasma. Human dentin specimens were divided to 5 groups (group C, HA, HAF, HAP, and HAFP). Group HA was treated with n-HA, group HAF was treated with n-HA after a F-CMC gel application, group HAP was treated with n-HA after a plasma treatment and group HAFP was treated with n-HA after a plasma and F-CMC gel treatment. The occlusion of dentinal tubules was investigated using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS), which shows Ca/P ratio. In the EDS results, a higher Ca/P ratio was shown in the groups including n-HA than in the control group. The specimens of group HAP and HAFP had a higher Ca/P ratio in retentivity. In the SEM results, there was not a significant difference in the amount of times applied. Therefore, this study suggests F-CMC gel and n-HA treatment using nonthermal atmospheric plasma will be a new treatment method for decreasing hypersensitivity.
Carboxymethylcellulose Sodium ; Cellulose ; Dentin Sensitivity ; Dentin ; Durapatite ; Fluorides ; Humans ; Hydroxyapatites ; Hypersensitivity ; Methods ; Microscopy, Electron, Scanning ; Plasma Gases ; Plasma ; Spectrometry, X-Ray Emission ; Tooth Bleaching ; Wound Healing

PURPOSE: To investigate the effect of non-thermal atmospheric pressure plasma (NTAPP) treatment on shear bond strength (SBS) between resin cement and colored zirconia made with metal chlorides. MATERIALS AND METHODS: 60 zirconia specimens were divided into 3 groups using coloring liquid. Each group was divided again into 2 sub-groups using plasma treatment; the experimental group was treated with plasma, and the control group was untreated. The sub-groups were: N (non-colored), C (0.1 wt% aqueous chromium chloride solution), M (0.1 wt% aqueous molybdenum chloride solution), NP (non-colored with plasma), CP (0.1 wt% aqueous chromium chloride solution with plasma), and MP (0.1 wt% aqueous molybdenum chloride solution with plasma). Composite resin cylinders were bonded to zirconia specimens with MDP-based resin cement, and SBS was measured using a universal testing machine. All data was analyzed statistically using a 2-way ANOVA test and a Tukey test. RESULTS: SBS significantly increased when specimens were treated with NTAPP regardless of coloring (P<.001). Colored zirconia containing molybdenum showed the highest value of SBS, regardless of NTAPP. The molybdenum group showed the highest SBS, whereas the chromium group showed the lowest. CONCLUSION: NTAPP may increase the SBS of colored zirconia and resin cement. The NTAPP effect on SBS is not influenced by the presence of zirconia coloring.
Chlorides ; Chromium ; Molybdenum ; Plasma Gases ; Plasma* ; Resin Cements*

PURPOSE: The fourth state of matter, plasma is known as an ionized gas with electrons, radicals and ions. The use of non-thermal plasma (NTP) in cancer research became possible because of the progresses in plasma medicine. Previous studies on the potential NTP-mediated cancer therapy have mainly concentrated on cancer cell apoptosis. In the present study, we compared the inhibitory effect of NTP on cell migration and invasion in the oral squamous cancer cell lines. MATERIALS AND METHODS: We used oral squamous cancer cell lines (SCC1483, MSKQLL1) and different gases (N₂, He, and Ar). To investigate the mechanism of plasma treatment, using different gases (N₂, He, and Ar) which induces anti-migration and anti-invasion properties, we performed wound healing assay, invasion assay and gelatin zymography. RESULTS: The results showed that NTP inhibits cancer cell migration and invasion of oral squamous cancer cell. In addition, focal adhesion kinase expression and matrix metalloproteinase-2/9 activity were also inhibited. CONCLUSION: The suppression of cancer cell invasion by NTP varied depending on the type of gas. Comparison of the three gases revealed that N₂ NTP inhibited cell migration and invasion most potently via decreased expression of focal adhesion kinase and matrix metalloproteinase activity.
Apoptosis ; Cell Line ; Cell Movement ; Epithelial Cells* ; Focal Adhesion Protein-Tyrosine Kinases ; Gases ; Gelatin ; Ions ; Neoplasms, Squamous Cell* ; Paxillin ; Plasma ; Plasma Gases* ; Wound Healing

As a novel cofactor of oxidoreductase, pyrroloquinoline quinone (PQQ) has a great potential of application in medicine, food industries. In order to improve the efficiency of the PQQ production by Methylobacterium extorquens AM1, the strain was treated by atmospheric and room temperature plasma (ARTP). Positive mutants with changes in PQQ yield were obtained based on a high-throughput screening approach. After ARTP treatment, analysis data show that the positive mutation rate was 31.6%. Furthermore, we obtained an excellent positive mutant M. extorquens AM1 (E-F3) with the yield of 54.0 mg/L PQQ, which was approximately 3 times as much compared with that of the wild-type strain. The robust high-throughput screening method for mutagenesis by ARTP improves PQQ production. In addition, this method also provides a new strategy for further strain improvement.
Bacterial Proteins ; biosynthesis ; High-Throughput Screening Assays ; Methylobacterium extorquens ; enzymology ; genetics ; Mutagenesis ; PQQ Cofactor ; biosynthesis ; Plasma Gases ; Temperature

The hydrogen peroxide low temperature plasma sterilization technology solved the problems of thermo-sensitive materials' disinfection and sterilization based on its development and unique characteristics. This paper introduced the researches of clinical application quality control, and showed the hydrogen peroxide low temperature plasma sterilizers were being widely used in hospitals and highly recognized. According to the clinical data and the literatures of the domestic equipment in preliminary application, it could be concluded that the technology maturity of domestic hydrogen peroxide low temperature plasma sterilizers was in a high level. The advantages of using domestic hydrogen peroxide low temperature plasma sterilizers to do disinfection and sterilization included lower cost, safer, faster and non-toxic, etc. Also the management system should be improved and the clinical staff should master the technical essentials, obey the procedures strictly, verify periodically and offer full monitoring to upgrade the quality of sterilization.
Cold Temperature ; Disinfection ; instrumentation ; Hydrogen Peroxide ; chemistry ; Plasma Gases ; chemistry