Background: This study was performed to characterize the incidence, costs, and risk factors associated with renal and cardiovascular adverse outcomes following primary percutaneous coronary intervention (pPCI) in patients with ST-elevation myocardial infarction (STEMI). Methods: Patients with STEMI who underwent pPCI using iso-osmolar contrast were enrolled at 39 centers. The incidence of acute kidney injury (AKI) and major adverse renal and cardiovascular events (MARCE) was analyzed, as well as inpatient costs. Logistic regression analysis was performed to identify risk factors. Results: Among 2,293 patients, the incidence of AKI and MARCE within 72 hours post-pPCI was 4.14% (n = 95) and 4.40% (n = 101), respectively. AKI and/or MARCE were associated with systolic blood pressure (AKI: odds ratio [OR], 1.009; 95% confidence interval [CI], 1.000–1.018), hypertension (AKI: OR, 1.815; 95% CI, 1.133–2.906; MARCE: OR, 1.760;95% CI, 1.118–2.769), anterior wall infarction (AKI: OR, 1.895; 95% CI, 1.196–3.004; MARCE:OR, 1.939; 95% CI, 1.240–3.032), Killip class (AKI: OR, 1.465; 95% CI, 1.117–1.922; MARCE:OR, 1.467; 95% CI, 1.131–1.903), and serum creatinine (SCr; MARCE: OR, 1.006; 95% CI, 1.000–1.012). Hospitalization costs for patients with STEMI who developed AKI or MARCE were significantly higher than for those without AKI (9,595 ± 5,795 vs. 8,279 ± 3,872 USD, P = 0.003) or without MARCE (9,890 ± 5,616 vs. 8,255 ± 3,859 USD, P < 0.001). Conclusions In patients with STEMI undergoing pPCI with iso-osmolar contrast, the incidence of AKI and MARCE was associated with higher hospitalization costs. Systolic blood pressure, hypertension, anterior wall infarction, Killip class, and SCr were identified as risk factors for these outcomes.

Peri-implant keratinized mucosa (PIKM) augmentation refers to surgical procedures aimed at increasing the width of PIKM. Consensus reports emphasize the necessity of maintaining a minimum width of PIKM to ensure long-term peri-implant health. Currently, several surgical techniques have been validated for their effectiveness in increasing PIKM. However, the selection and application of PIKM augmentation methods may present challenges for dental practitioners due to heterogeneity in surgical techniques, variations in clinical scenarios, and anatomical differences. Therefore, clear guidelines and considerations for PIKM augmentation are needed. This expert consensus focuses on the commonly employed surgical techniques for PIKM augmentation and the factors influencing their selection at second-stage surgery. It aims to establish a standardized framework for assessing, planning, and executing PIKM augmentation procedures, with the goal of offering evidence-based guidance to enhance the predictability and success of PIKM augmentation.
Humans ; Consensus ; Dental Implants ; Mouth Mucosa/surgery* ; Keratins

OBJECTIVE: This cross-sectional study assessed the methodological quality of systematic reviews (SRs) of Chinese herbal medicine (CHM) published in Chinese between Jan 2021 and Sep 2022. METHODS: Chinese language CHM SRs were identified through literature searches across 3 international and 4 Chinese databases. Methodological quality was appraised using A MeaSurement Tool to Assess systematic Reviews 2. Logistic regressions were used to explore associations between bibliographical characteristics and quality. RESULTS: Analyses of methodological quality found that among the 213 sampled SRs, 69.5% were of critically low quality, 30.5% were of low quality, and none achieved high or moderate quality. Common shortcomings included the failure to identify the studies excluded from the analysis, failure to disclose funding sources, and limited evaluation of the potential impact of bias on conclusions. Logistic regressions revealed that SRs led by corresponding authors affiliated with universities or academic institutions tended to be of lower quality than SRs led by authors affiliated with hospitals or clinical facilities. CONCLUSION Recent Chinese language CHM SRs exhibited limited methodological quality, making them unlikely to support the development of clinical practice guidelines. Urgent initiatives are needed to enhance training for researchers, peer-reviewers and editors involved in the preparation and publication of SRs. Adoption of Preferred Reporting Items for Systematic Reviews and Meta-Analyses reporting guidelines in Chinese language journals is crucial to improve the relevance of SRs for Chinese medicine development. Addressing deficiencies in methodology and reporting is essential for promoting evidence-based practices and informed clinical decisions in Chinese medicine. Please cite this article as: Jiang Y, Zhong CC, Wang BH, Xu SS, Ho FF, Kwong MH, Ho L, Zhou JHS, Lam KC, Liu JP, Zhang BT, Chung VCH. Methodological quality of systematic reviews on orally administered Chinese herbal medicine published in Chinese between 2021 and 2022: A cross-sectional study. J Integr Med. 2025; 23(5):492-501.
Cross-Sectional Studies ; Drugs, Chinese Herbal/administration & dosage* ; Systematic Reviews as Topic/standards* ; Humans ; China ; Administration, Oral ; Medicine, Chinese Traditional

ObjectiveTo investigate the relationship between mitochondrial DNA copy number (mtDNAcn) and cognitive dysfunction, and its mediating role between type 2 diabetes mellitus (T2DM) and cognitive dysfunction. MethodsA case-control study was conducted from May 2019 to April 2021 at the Shanghai Yangpu District Central Hospital, China. A total of 193 subjects were recruited and divided into two groups based on the Montreal Cognitive Assessment (MoCA): normal control (NC) group (n=95) and cognitive impairment group (n=98). The prevalence of T2DM was determined on the basis of medical history, while mtDNAcn in peripheral blood samples was quantified using realtime fluorescent quantitative polymerase chain reaction. ResultsUnivariate analyses revealed that the mean mtDNAcn in the cognitive impairment group was 0.76±0.37, significantly lower than that in the NC group (1.06±0.45) (P<0.05). Logistic regression analyses showed that higher mtDNAcn was associated with a reduced risk of cognitive impairment (OR=0.315, 95%CI: 0.125‒0.795). Additionaly, a statistically significant positive correlation was observed between mtDNAcn and the total MoCA score (r=0.381, P<0.01). Morever, T2DM history (OR=2.741, 95%CI: 1.002‒7.497) and elevated glycosylated hemoglobin (HbA1c) levels (OR=1.796, 95%CI: 1.190‒2.711) were identified as risk factors for cognitive impairment. Mediation analyses indicated that mtDNAcn served as a mediator between T2DM/HbA1c and the risk of cognitive impairment, with proportions of mediating effect of 9.04% and 9.18%, respectively. ConclusionPatients with mild and moderate cognitive impairment have significantly lower mtDNAcn than those with normal cognitive function. Reduced mtDNAcn is an influencing factor for cognitive dysfunction and may play a mediating role in the association between T2DM and mild to moderate cognitive impairment.

Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes

In order to clarify the effects of drought stress training on the quality and drought resistance of Codonopsis pilosula, this study used PEG to simulate drought stress and employed potting with water control for the drought stress training of C. pilosula plants. The polysaccharide content, secondary metabolites, antioxidant system, and photosynthetic pigment system of C. pilosula after drought stress training were analyzed. The results showed that the content of fructans in the root of C. pilosula increased after two rounds of drought stress treatment, and it was significantly higher than that of the control group. The accumulation of fructans in the root of C. pilosula showed an upward trend during the rehydration treatment. The content of lobetyolin and tangshenoside Ⅰ increased after drought stress treatment compared with that of the control group. The rehydration treatment caused first increasing and then decreasing in the content of lobetyolin, while it had no significant effect on the tangshenoside Ⅰcontent. The content of photosynthetic pigments decreased after drought stress treatment, and it gradually increased during the first round of rehydration and the second round of rehydration. Moreover, the increase was faster in the second round of rehydration than in the first round of rehydration. The content of the peroxidation product malondialdehyde(MDA) and the activities of superoxide dismutase(SOD), peroxidase(POD), and catalase(CAT) increased after drought stress treatment compared with those of the control group, and they showed a tendency of decreasing during rehydration. Moreover, the decrease was faster in the second round of rehydration than in the first round of rehydration. When the plants of C. pilosula after drought stress training were again subjected to severe drought stress, the wilting rate decreased significantly, and the biomass increases significantly. This study showed that the drought stress training could promote the accumulation of polysaccharides and secondary metabolites in the root of C. pilosula. When encountering drought stress again, C. pilosula plants could quickly regulate the antioxidant system and delay the decomposition of chlorophyll to respond to drought stress. The findings provide a theoretical basis for the ecological cultivation of C. pilosula in arid and semi-arid areas.
Codonopsis/growth & development* ; Droughts ; Polysaccharides/metabolism* ; Stress, Physiological ; Water/metabolism* ; Antioxidants/metabolism* ; Photosynthesis ; Drought Resistance

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

This study aimed to characterize and identify the non-volatile components in aqueous and ethanolic extracts of the stems and leaves of Rhododendron tomentosum by using sensitive and efficient ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry(UHPLC-Q-TOF-MS) combined with a self-built information database. By comparing with reference compounds, analyzing fragment ion information, searching relevant literature, and using a self-built information database, 118 compounds were identified from the aqueous and ethanolic extracts of R. tomentosum, including 35 flavonoid glycosides, 15 phenolic glycosides, 12 flavonoids, 7 phenolic acids, 7 phenylethanol glycosides, 6 tannins, 6 phospholipids, 5 coumarins, 5 monoterpene glycosides, 6 triterpenes, 3 fatty acids, and 11 other types of compounds. Among them, 102 compounds were reported in R. tomentosum for the first time, and 36 compounds were identified by comparing them with reference compounds. The chemical components in the ethanolic and aqueous extracts of R. tomentosum leaves and stems showed slight differences, with 84 common chemical components accounting for 71.2% of the total 118 compounds. This study systematically characterized and identified the non-volatile chemical components in the ethanolic and aqueous extracts of R. tomentosum for the first time. The findings provide a reference for active ingredient research, quality control, and product development of R. tomentosum.
Rhododendron/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Mass Spectrometry/methods* ; Plant Leaves/chemistry*