ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

ObjectiveBiochemistry and Molecular Biology, a discipline that elucidates life phenomena at the molecular level, serves as a core foundational course in medical education. It provides the theoretical basis for studying other basic and clinical medical subjects, as well as for understanding pathogenesis, disease diagnosis, and treatment. However, its complex content and highly abstract concepts have posed a dual challenge to traditional teaching models: “inefficient instruction” and “inadequate learning outcomes”. Within limited classroom hours, how to engage students and stimulate their intrinsic motivation, and how to help them recognize, understand, and develop a passion for biochemistry from the perspective of the discipline’s essence, have long been key focuses of curriculum research. MethodsUsing the lipid metabolism chapter as an example, this study employs “Rain Classroom”, a generative artificial intelligence (AI)-assisted platform, to support education in four dimensions: teaching, learning, evaluation, and research. In teaching, it assists instructors through virtual experiments, lesson preparation support, knowledge mapping, and assignment design. For learning, it serves as an intelligent study assistant for students, providing automated assignment review, enabling educational resource sharing, and facilitating personalized learning pathways. In evaluation, the platform automates assignment grading, analyzes student performance data, and offers diagnostic feedback and teaching recommendations. In research, it aids educators in collecting and analyzing teaching data, as well as searching for and summarizing relevant literature. ResultsThe results indicate that an educational model integrating teacher-led instruction, student-centered learning, and generative AI assistance significantly enhances teaching quality, students’ self-directed learning abilities, and knowledge mastery. Furthermore, with the support of generative AI, curriculum-based ideological education—focusing on cutting-edge disciplinary advances and topical medical issues—helps cultivate students’ medical spirit of “honoring life and healing the wounded”, thereby fostering the establishment of appropriate professional values. Finally, while generative AI presents both opportunities and challenges for higher education, this study also analyzes potential risks in its teaching applications, emphasizing the need for both instructors and students to avoid over-reliance and to ensure that technological tools consistently serve the fundamental goals of education. ConclusionThis study demonstrates that integrating generative AI, specifically via the “Rain Classroom” platform, can effectively enhance biochemistry education. By supporting teaching, learning, evaluation, and research, this approach improves both educational effectiveness and student outcomes. It also facilitates the incorporation of cutting-edge knowledge and professional ethics, nurturing a patient-centered mindset. Additionally, the study addresses potential implementation risks to ensure that such technological tools remain aligned with the core purpose of education.

ObjectiveTo explore the changes in color， odor and chemical components during wine-processing of Chuanxiong Rhizoma（CR）， identify differential markers， and provide a basis for standardizing the process and establishing quality standards. MethodsFifteen batches of CR samples from 4 producing areas were collected. Colorimeter and electronic nose were used to detect the color changes and odor components of CR before and after wine-processing. Multivariate statistical methods including partial least squares-discriminant analysis（PLS-DA）， principal component analysis（PCA）， discriminant factor analysis（DFA） and Fisher discriminant analysis were applied to identify wine-processed CR at different processing stages and establish discriminant models， and differential components were screened out based on variable importance in the projection（VIP） value1. Then， high performance liquid chromatography（HPLC） was employed to detect the content changes of four components（ferulic acid， senkyunolide I， senkyunolide A and ligustilide） during the processing stages. ResultsThe differences of wine-processed CR at various stages were primarily reflected in color parameters L^*（brightness value）， a^*（red-green value） and b^*（yellow-blue value）. Based on chromaticity differences， the color reference ranges were established for moderately processed CR， including L^* of 46.75-48.24， a^* of 5.37-6.07 and b^* of 20.32-21.70. In odor analysis， DFA revealed significant differences among processing stages， and 11 odor markers were identified， with four differential markers（4-hydroxy-3-butylphthalide， isopropyl butyrate， L-limonene and 1-methoxyhexane） based on VIP values. HPLC results showed that there was no significant difference of the four components except for ligustilide in wine-processed CR at different stages. ConclusionThis study achieved rapid identification of wine-processed CR with different processing degrees by electronic sensory technology and differential component content detection， with discrimination accuracy rates of 92.4% and 93.272% for color and odor， respectively. This paper also established the reference ranges of main colorimetric parameters for wine-processed CR at different stages， and four differential components were screened out， providing a basis for standardizing the processing of wine-processed CR and establishing quality standards for this decoction pieces.

ObjectiveTo explore the changes in color， odor and chemical components during wine-processing of Chuanxiong Rhizoma（CR）， identify differential markers， and provide a basis for standardizing the process and establishing quality standards. MethodsFifteen batches of CR samples from 4 producing areas were collected. Colorimeter and electronic nose were used to detect the color changes and odor components of CR before and after wine-processing. Multivariate statistical methods including partial least squares-discriminant analysis（PLS-DA）， principal component analysis（PCA）， discriminant factor analysis（DFA） and Fisher discriminant analysis were applied to identify wine-processed CR at different processing stages and establish discriminant models， and differential components were screened out based on variable importance in the projection（VIP） value1. Then， high performance liquid chromatography（HPLC） was employed to detect the content changes of four components（ferulic acid， senkyunolide I， senkyunolide A and ligustilide） during the processing stages. ResultsThe differences of wine-processed CR at various stages were primarily reflected in color parameters L^*（brightness value）， a^*（red-green value） and b^*（yellow-blue value）. Based on chromaticity differences， the color reference ranges were established for moderately processed CR， including L^* of 46.75-48.24， a^* of 5.37-6.07 and b^* of 20.32-21.70. In odor analysis， DFA revealed significant differences among processing stages， and 11 odor markers were identified， with four differential markers（4-hydroxy-3-butylphthalide， isopropyl butyrate， L-limonene and 1-methoxyhexane） based on VIP values. HPLC results showed that there was no significant difference of the four components except for ligustilide in wine-processed CR at different stages. ConclusionThis study achieved rapid identification of wine-processed CR with different processing degrees by electronic sensory technology and differential component content detection， with discrimination accuracy rates of 92.4% and 93.272% for color and odor， respectively. This paper also established the reference ranges of main colorimetric parameters for wine-processed CR at different stages， and four differential components were screened out， providing a basis for standardizing the processing of wine-processed CR and establishing quality standards for this decoction pieces.

Objective: To investigate the epidemiological characteristics and spatial-temporal clustering of severe fever with thrombocytopenia syndrome (SFTS) in Huai'an City, Jiangsu Province from 2011 to 2024, so as to provide a basis for optimizing local SFTS prevention and control strategies, and identifying high-risk areas and key populations. Methods: Data on SFTS incidence and deaths in Huai'an City from 2011 to 2024 were collected from the Infectious Disease Reporting Information System of the Chinese Disease Prevention and Control Information System. The reported incidence, mortality, and fatality rates were calculated. Descriptive analysis was performed on temporal, population, and regional distribution. The average annual percent change (AAPC) was used to analyze the trend in the reported incidence of SFTS. Global and local spatial autocorrelation analyses were employed to examine the spatial distribution patterns and spatial association patterns of SFTS incidence while spatio-temporal scanning analyses was used to assess the spatial-temporal clustering of SFTS. Results: A total of 337 SFTS cases were reported in Huai'an City from 2011 to 2024, with the reported incidence rising from 0.17/100 000 to 1.88/100 000. There were 20 deaths, with an average annual mortality of 0.03/100 000, and a fatality rate of 5.93%. The incidence showed obvious seasonality, with a peak in May and June (148 cases, accounting for 43.92%). Spring and summer accounted for 107 cases (31.75%) and 159 cases (47.18%), respectively. The reported SFTS cases were mainly male, farmers, and individuals aged ≥41 years, accounting for 56.38%, 79.23%, and 96.74%, respectively. The population distribution of death cases was basically consistent with that of incident cases. Xuyi County was a high-incidence area, with a total of 332 reported cases, accounting for 98.52%. All death cases were reported in this county. Spatial autocorrelation analyses revealed a positive spatial correlation in SFTS incidence from 2019 to 2024, with Moran's I values ranging from 0.214 to 0.336 (all P<0.05). Heqiao Town, Tianquanhu Town, and Guiwu Town in Xuyi County were identified as high-high clustering areas. Spatio-temporal scanning analyses showed that cluster 1 was consistent with the high-high clustering areas, with an aggregation time from the second quarter of 2019 to the second quarter of 2022. Conclusions From 2011 to 2024, the reported incidence of SFTS in Huai'an City showed an upward trend, with a high incidence in spring and summer. Males, farmers, and the middle-aged and elderly population were the key populations for prevention and control. Xuyi County was the key area for prevention and control.

Abstract The prevention and control of myopia in Chinese children and adolescents has become a major public health issue. While maintaining increased outdoor activity as a cornerstone intervention, there is an urgent need to explore new complementary approaches that can be effectively implemented in both indoor and outdoor settings. In recent years, environmental spatial frequency has gained increasing attention as one of the key environmental factors influencing the development and progression of myopia. Both animal studies and human research have confirmed that indoor environments lacking mid to high spatial frequency components, often characterized as "visually impoverished", can promote axial elongation and myopia through mechanisms such as disruption of retinal neural signaling, impaired accommodative function, and altered expression of related molecules. Based on the scientific consensus, it is recommended that "enriching of environmental spatial frequency" should be integrated into the myopia prevention and control framework. Following the principles of schoolled organization, family cooperation, community involvement, and student participation, specific measures are put forward in three areas：optimizing school visual settings, improving home spatial environments, and promoting healthy visual behavior. The aim is to create "visually friendly" indoor environments as an important supplement to outdoor activity, thereby providing a novel perspective and strategy for comprehensively advancing myopia prevention and control among children and adolescents.

Patients with Takayasu arteritis combined with aortic valve disease often have a poor prognosis following surgical valve replacement, frequently encountering complications such as perivalvular leakage, valve detachment, and anastomotic aneurysm. This article presents a high-risk case wherein severe aortic valve insufficiency associated with Takayasu arteritis was successfully managed through transcatheter aortic valve implantation via the transapical approach. The patient had satisfactory valve function with no complications observed during the six-month postoperative follow-up. This case provides a minimally invasive and feasible alternative for the clinical management of such high-risk patients.

Objective: To investigate the prevalence of undernutrition and its associated factors among left behind and non left behind primary and secondary school students in the Nutrition Improvement Program for Rural Compulsory Education Students (NIPRCES) areas of central and western China, so as to provide evidence for improving the nutritional status of children and adolescents. Methods: A survey was conducted among 123 782 students selected by random cluster sampling method in grades 3-9 from NIPRCES in central (Hebei, Shanxi, Heilongjiang, Jilin, Anhui, Jiangxi, Henan, Hunan, Hubei, and Hainan) and western (Gansu, Guangxi, Inner Mongolia, Ningxia, Tibet, Shaanxi, Guizhou, Sichuan, Xinjiang, the Xinjiang Production and Construction Corps, Yunnan, Qinghai, and Chongqing) China in 2023. Anthropometric measurements and questionnaires were used to assess nutritional and dietary status. The prevalence of undernutrition was compared between left behind and non left behind students by Chi square test, and associated factors were analyzed by three level Logistic mixed effects model. Results: The prevalence of undernutrition was 8.5% (4 326) in left behind students and 8.1% (5 905) in non left behind students. Three level Logistic mixed effect model analysis showed that whether left behind or non left behind, the undernutrition rates of primary and secondary students in western regions were higher than those of students in central regions [ OR (95% CI )=1.72(1.57-1.87),2.25(2.07- 2.43 )]; the undernutrition risk was lower for those whose fathers had a cultural level of high school or above [ OR (95% CI )=0.69(0.62-0.77),0.90(0.82-0.98)] or junior high school [ OR (95% CI )=0.72(0.66-0.79),0.92(0.85-0.99)] compared to those with primary school or below; picky eating or selective eating increased the risk of undernutrition [ OR (95% CI )=2.36(2.07-2.68),2.28(2.04-2.55)], and primary and secondary school students without nutritional content in health education classes had higher rates of undernutrition [ OR (95% CI )=1.12(1.03-1.23),1.09(1.01-1.17)](all P <0.05). Conclusion The prevalence of undernutrition is slightly higher in left behind primary and secondary students than in non left behind primary and secondary students in central and western NIPRCES areas, with variations across different characteristics.

Objective: To analyze the trends of the frequency of meat, egg, and milk consumption among rural primary and junior high school students in central and western China covered by the Nutrition Improvement Program for Rural Compulsory Education Students (NIPRCES) from 2015 to 2023, so as to provide basis for formulating more targeted nutrition intervention policies and health education strategies. Methods: Using data from six rounds of monitoring and evaluation (2015-2021 and 2023), the study included 323 870 students from grade 3 to 9 across 22 provinces (autonomous regions and municipalities) in central and western China. The consumption frequencies of meat, egg, and milk over the past week were collected via questionnaires. The Cochran-Armitage trend test was used to analyze temporal trends, and multivariable Logistic regression models were employed to analyze factors associated with the frequency of meat, egg and milk consumption and to test for interaction effects between the year and gender, region, and grade level. Results: From 2015 to 2023, the proportion of students consuming meat, egg, and milk ≥1 time/day increased from 23.20 %, 10.71%, and 0.74% to 35.53%, 22.09%, and 26.63%, respectively. Trend tests indicated a significant upward trend for the daily intake of all three food categories for meat, egg and milk over the years ( Z =67.18, 64.90, 93.14, all P <0.01). Multivariable Logistic regression analysis showed that the daily meat intake was lower in the central region than in the western region ( OR=0.77, 95%CI =0.76-0.78), whereas the daily intake of eggs ( OR=1.19, 95%CI =1.17-1.22) and milk ( OR= 1.27 , 95%CI =1.24-1.29) was higher in the central region (all P <0.05). Compared with grade 3-4 students, junior high school students had lower daily intake of meat, eggs, and milk≥1 time/day ( OR =0.95, 0.77, 0.77, all P <0.05), with a declining trend as grade increased. Girls also had lower daily intake of meat, eggs, and milk ≥1 time/day than boys ( OR =0.95，0.93，0.91, all P < 0.05). Significant interactions were observed between year and region, as well as between year and grade (all P <0.05). Conclusion From 2015 to 2023, the NIPRCES improved the intake level of among rural students, but the situation of relatively insufficient intake of egg and milk among females, junior high school students and those in the western region still exists.

Objective: To understand the current status of neglect among rural preschool children in Xi an under the multi child policy and the association with family characteristics, so as to provide a reference for preventing and reducing the occurrence of child neglect. Methods: A total of 7 052 parents of preschool children were selected using stratified cluster sampling across 9 suburban counties/districts in Xi an from March to April 2025. A questionnaire survey was administered using the Chinese Norm Scale for Neglect Assessment of Rural(Preschool) Children Aged 3-6. The t-test, Chi-quare test, and analysis of variance (ANOVA) were used for inter group comparisons. Results: The overall prevalence rate and mean score of neglect among rural preschool aged children in Xi an were 32.4% and 38.27±6.70, respectively. Statistically significant differences were detected in neglect rates and neglect degrees among preschool children of different genders and grade levels ( χ 2=30.41, 15.15, t/F =4.92,7.03, all P <0.05). Statistically significant differences were also detected in neglect rates and neglect degrees among preschool children from whether only one child, different family structures, numbers of children in a family and families with different annual incomes ( χ 2=29.22, 10.41 , 31.99, 186.47, t/F =-9.96, 5.50, 33.57, 68.63, all P <0.05). In multi child families, there was a statistically significant difference in neglect degree among children with different birth orders ( F =4.25, P <0.05), but there was no statistically significant difference in neglect rate ( χ 2=5.73, P >0.05). Among all subgroups, the highest neglect rates and neglect degrees were observed in children from multi child families(35.0%,39.00±6.71), other family types(50.0%，42.38±12.34) and families with three children(39.9%，39.50±7.43). Lower annual family income was associated with higher neglect rates and neglect degrees among preschool children( χ 2 trend =186.47， F =270.68，both P <0.05). Conclusions Under the multiple child policy, the neglect of preschool children in rural areas of Xi an is quite severe, particularly in families with multiple children and low income households. Targeted interventions should be implemented for high risk groups.