OBJECTIVE: To investigate the effectiveness of digital three-dimensional (3D) printing osteotomy guide plate assisted total knee arthroplasty (TKA) in treatment of knee osteoarthritis (KOA) patients with femoral internal implants. METHODS: The clinical data of 55 KOA patients who met the selection criteria between July 2021 and October 2023 were retrospectively analyzed. Among them, 26 cases combined with femoral implants were treated with digital 3D printing osteotomy guide plate assisted TKA (guide plate group), and 29 cases were treated with conventional TKA (control group). There was no significant difference in gender, age, body mass index, side, Kellgren-Lawrence classification, preoperative visual analogue scale (VAS) score, Hospital for Special Surgery (HSS) knee score, knee range of motion, and other baseline data between the two groups ( P>0.05). The operation time, intraoperative blood loss, incision length, postoperative first ambulation time, surgical complications; VAS score, knee HSS score, knee range of motion before operation, at 1 week and 3 months after operation, and at last follow-up; distal femoral lateral angle, proximal tibial medial angle, hip-knee-ankle angle and other imaging indicators at last follow-up were recorded and compared between the two groups. RESULTS: The operation time, incision length, intraoperative blood loss, and postoperative first ambulation time in the guide plate group were significantly lower than those in the control group ( P<0.05). In the control group, there were 1 case of incision rupture and bleeding and 1 case of lower limb intermuscular venous thrombosis, which was cured after symptomatic treatment. There was no complication such as neurovascular injury, incision infection, or knee prosthesis loosening in both groups. Patients in both groups were followed up 12-26 months, with an average of 16.25 months. The VAS score, HSS score, and knee range of motion improved at each time point after operation in both groups, and further improved with time after operation, the differences were significant ( P<0.05). The above indicators in the guide plate group were significantly better than those in the control group at 1 week and 3 months after operation ( P<0.05), and there was no significant difference between the two groups at last follow-up ( P>0.05). At last follow-up, the distal femoral lateral angle, the proximal tibial medial angle, and the hip-knee-ankle angle in the guide plate group were significantly better than those in the control group ( P<0.05). CONCLUSION The application of digital 3D printing osteotomy guide plate assisted TKA in the treatment of KOA patients with femoral implants can simplify the surgical procedures, overcome limitations of conventional osteotomy guides, reduce surgical trauma, achieve individualized and precise osteotomy, and effectively restore lower limb alignment and knee joint function.
Humans ; Arthroplasty, Replacement, Knee/instrumentation* ; Osteoarthritis, Knee/surgery* ; Osteotomy/instrumentation* ; Male ; Retrospective Studies ; Female ; Printing, Three-Dimensional ; Femur/surgery* ; Middle Aged ; Bone Plates ; Range of Motion, Articular ; Aged ; Treatment Outcome ; Surgery, Computer-Assisted/methods* ; Knee Prosthesis ; Knee Joint/surgery* ; Operative Time

OBJECTIVE: To explore the corrective strategies and effectiveness of osteotomy surgery for severe lower limb deformities in hypophosphatemic rickets. METHODS: A retrospective analysis was conducted on 29 patients with severe lower limb deformities of hypophosphatemic rickets who underwent surgical treatment between February 2012 and August 2024. There were 9 males and 20 females. The age ranged from 13 to 53 years, with an average of 24.6 years. All patients were deformities of both lower limbs, presenting as 24 cases of O-shaped legs, 2 cases of wind-blown deformities, and 3 cases of X-shaped legs. Based on the full-length films of both lower limbs in the standing position before operation, the osteotomy planes of the femur, tibia, and fibula were designed. Among them, if both the same-sided thigh and leg were deformed, staged surgeries of both lower limbs were selected. If only the thigh or leg were deformed, simultaneous surgeries of both lower limbs were selected. The femur deformity was corrected immediately after osteotomy at the deformed plane; the osteotomy fragment was temporarily controlled with an external fixator, which was removed after perform internal fixation with a steel plate. After fibular osteotomy, the Ilizarov frame or Taylor frame was installed on the tibia and fibula. The threaded rods were removed and then tibial osteotomy was performed on the deformed plane. Patients using the Taylor frame did not undergo deformity correction during operation. The external fixators were adjusted starting 7 days after operation to correct the varus, valgus, and rotational deformities of the lower limb. Patients using the Ilizarov frame corrected the rotational deformity of the tibia during operation. The external fixator was adjusted starting 7 days after operation to correct the varus and valgus deformities of the lower limb. During the treatment period, the patient could walk with partial weight-bearing on the operated limb with crutches. The external fixator was removed after the bone healed. Before operation and at last follow-up, the medial proximal tibial angle (MPTA), lateral distal tibial angle (LDTA), posterior proximal tibial angle (PPTA), anterior distal tibial angle (ADTA), anatomic lateral distal femoral angle (aLDFA), posterior distal femoral angle (PDFA), and mechanical axis deviation (MAD), lower limb rotation, limb length discrepancy (LLD) were measured. The self-made scoring criteria were adopted to evaluate the degree of lower limb deformity of the patients. RESULTS: All operations were successfully completed, and no complications such as nerve or vascular injury occurred. The adjustment time of the external fixator of the lower limb after operation was 28-46 days, with an average of 37.4 days. The wearing time of the external fixator ranged from 134 to 398 days, with an average of 181.5 days. Mild pin tract infections occurred in 2 limbs. The osteofascial compartment syndrome occurred in 1 limb after operation. No complications related to orthopedic adjustment of the external fixator occurred in other patients. All patients were followed up 6-56 months, with an average of 28.2 months. At last follow-up, full-length films of both lower limbs in the standing position showed that the coronal mechanical axes of the lower limbs of all patients returned to the normal. At last follow-up, MPTA, LDTA, PPTA, aLDFA, PDFA, MAD, lower limb rotation, LLD, and the score of lower limb deformity significantly improved when compared with those before operation ( P<0.05). There was no significant difference in ADTA between pre- and post-operation ( P>0.05). The degree of lower limb deformity were rated as moderate in 2 cases and poor in 27 cases before operation and as excellent in 7 cases, good in 18 cases, and moderate in 4 cases at last follow-up, with an excellent and good rate of 86.2%. CONCLUSION For severe lower limb deformities in hypophosphatemic rickets, immediate correction of deformities with femoral osteotomy and internal plate fixation, as well as gradually correction of deformities with tibiofibular osteotomy and circular external fixation (Ilizarov frame or Taylor frame), have satisfactory therapeutic effects.
Humans ; Male ; Osteotomy/instrumentation* ; Female ; Adult ; Retrospective Studies ; Tibia/abnormalities* ; Adolescent ; Femur/abnormalities* ; Middle Aged ; Fibula/surgery* ; Rickets, Hypophosphatemic/complications* ; Young Adult ; Treatment Outcome ; External Fixators ; Bone Plates ; Lower Extremity Deformities, Congenital/etiology*

OBJECTIVE: To summarize the biomechanical research progress on different fixation methods in medial opening-wedge high tibial osteotomy (MOWHTO) and provide references for selecting appropriate fixation methods in clinical applications of MOWHTO for treating knee osteoarthritis (KOA). METHODS: Recent domestic and international literature on the biomechanical studies of MOWHTO fixation methods was reviewed to analyze the characteristics and biomechanical performance of various fixation techniques. RESULTS: The medial-specific osteotomy plate system has become the mainstream due to its high stiffness and stability, but issues such as soft tissue irritation and stress shielding remain. The use of filler blocks significantly enhances fixation stability and promotes bone healing when the osteotomy gap is large, reducing axial displacement by 73%-76% and decreasing plate stress by 90%. Auxiliary screws improve axial and torsional stability, particularly in cases with large correction angles, effectively preventing lateral hinge fractures. Alternative fixation methods like external fixators hold unique clinical value by minimizing soft tissue irritation and allowing postoperative adjustment. CONCLUSION There is currently no unified standard for selecting MOWHTO fixation methods. Clinical decisions should comprehensively consider factors such as bone quality, correction angle, and postoperative rehabilitation needs.
Humans ; Osteotomy/instrumentation* ; Biomechanical Phenomena ; Tibia/surgery* ; Bone Plates ; Osteoarthritis, Knee/surgery* ; Bone Screws ; External Fixators ; Knee Joint/surgery*

OBJECTIVE: To explore the biomechanical characteristics and clinical application effects of three-dimensional (3D) printed osteotomy guide plate combined with Ilizarov technique in the treatment of rigid clubfoot. METHODS: A retrospective analysis was performed on the clinical data of 11 patients with rigid clubfoot who met the inclusion criteria and were admitted between January 2019 and December 2024. There were 6 males and 5 females, aged 21-60 years with an average of 43.2 years. Among them, 5 cases were untreated congenital rigid clubfoot, 4 cases were recurrent rigid clubfoot after previous treatment, and 2 cases were rigid clubfoot due to disease sequelae. All 11 patients first received slow distraction using Ilizarov technique combined with circular external fixator until the force lines of the foot and ankle joint were basically normal. Then, 1 male patient aged 24 years was selected, and CT scanning was used to obtain imaging data of the ankle joint and foot. A 3D finite element model was established and validated using the plantar stress distribution nephogram of the patient. After validation, the biomechanical changes of the tibiotalar joint under the same load were simulated after triple arthrodesis and fixation. The optimal correction angle of the hindfoot was determined to fabricate 3D-printed osteotomy guide plates, and all 11 patients underwent triple arthrodesis using these guide plates. The functional recovery was evaluated by comparing the American Orthopaedic Foot and Ankle Society (AOFAS) score, International Clubfoot Study Group (ICFSG) score, and 36-Item Short Form Survey (SF-36) score before and after operation. RESULTS: Finite element analysis showed that the maximum peak von Mises stress of the tibiotalar joint was at hindfoot varus 3° and the minimum at valgus 6°; the maximum peak von Mises stress of the 3 naviculocuneiform joints under various conditions appeared at lateral naviculocuneiform joint before operation, and the minimum appeared at lateral naviculocuneiform joint at neutral position 0°; the maximum peak von Mises stress of the 5 tarsometatarsal joints under various conditions appeared at the 2nd tarsometatarsal joint at hindfoot neutral position 0°, and the minimum appeared at the 1st tarsometatarsal joint at valgus 6°. Clinical application results showed that the characteristics of clubfoot deformity observed during operation were consistent with the preoperative 3D reconstruction model. All 11 patients were followed up 8-24 months with an average of 13.1 months. One patient had postoperative incision exudation, which healed after dressing change; the remaining patients had good incision healing. All patients achieved good healing of the osteotomy segments, with a healing time of 3-6 months and an average of 4.1 months. At last follow-up, the AOFAS score, SF-36 score, and ICFSG score significantly improved when compared with those before operation ( P<0.05). CONCLUSION The 3D-printed osteotomy guide plate combined with Ilizarov technique has favorable biomechanical advantages in the treatment of rigid clubfoot, with significant clinical application effects. It can effectively improve the foot function of patients and achieve precise and personalized treatment.
Humans ; Clubfoot/diagnostic imaging* ; Printing, Three-Dimensional ; Male ; Osteotomy/instrumentation* ; Female ; Ilizarov Technique/instrumentation* ; Adult ; Retrospective Studies ; Biomechanical Phenomena ; Middle Aged ; Bone Plates ; Young Adult ; Finite Element Analysis ; Treatment Outcome ; Ankle Joint/physiopathology* ; Tomography, X-Ray Computed ; External Fixators

OBJECTIVE: To evaluate the functional and aesthetic evaluation of external fixator lengthening through plantar approach for fourth brachymetatarsia. METHODS: A retrospective analysis was conducted on 20 patients (23 feet) with fourth brachymetatarsia who met the selection criteria between January 2016 and January 2024, including 3 males and 17 females, with 8 left, 9 right, and 3 bilateral cases. The mean age was 24.7 years (range, 14-51 years). The preoperative metatarsal shortening length was (13.8±3.2) mm. The preoperative American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was 79.5±3.9, the visual analogue scale (VAS) score of appearance satisfaction was 1.7±0.8, and the appearance index (AI) score was 13.6±0.9. All patients underwent external fixator lengthening through plantar approach. The lengthening length of metatarsal bone, lengthening ratio, healing time, and healing index were recorded. Functional outcomes were assessed using the AOFAS forefoot score, VAS score of appearance satisfaction, and quality-of-life impact with AI questionnaire. RESULTS: All 20 patients were followed up 14-55 months with an average of 36.3 months. During the follow-up, complications occurred in 4 cases (17.4%), including 2 cases of metatarsophalangeal joint stiffness, which had no significant effect on the function and appearance. Delayed union of osteotomy occurred in 1 case (healed at 12 weeks after operation). Pin loosening occurred in 1 case and recovered after outpatient reinforcement. No complications related to plantar scar occurred. At last follow-up, the lengthening length of metatarsal bone was (13.9±3.1) mm, and the lengthening ratio was 25.8%±5.6%. All cases achieved bony union, with a mean healing time of (64.3±12.5) days and a healing index of (46.9±4.8) d/cm. At last follow-up, AOFAS score was 98.9±2.1, the VAS score of appearance satisfaction was 9.3±0.7, and the AI score was 0.6±0.8, which significantly improved when compared with those before operation ( t=27.398, P<0.001; t=32.994, P<0.001; t=56.135, P<0.001). CONCLUSION External fixator lengthening through plantar approach is a safe and effective technique for fourth brachymetatarsia, achieving satisfactory functional and aesthetic outcomes.
Humans ; Male ; Female ; Adult ; External Fixators ; Retrospective Studies ; Bone Lengthening/instrumentation* ; Middle Aged ; Metatarsal Bones/abnormalities* ; Adolescent ; Young Adult ; Treatment Outcome ; Patient Satisfaction ; Esthetics ; Osteotomy/methods* ; Foot Deformities, Congenital/surgery*

OBJECTIVE: To compare effectiveness of multiple metatarsal osteotomy versus first metatarsophalangeal arthrodesis in treating severe metatarsal adductus hallux valgus deformity. METHODS: A retrospective analysis was conducted on the clinical data of 25 patients with severe metatarsal adductus hallux valgus deformity admitted between June 2010 and May 2014 who met the selective criteria. Among them, 15 patients underwent multiple metatarsal osteotomy (osteotomy group), while 10 patients underwent first metatarsophalangeal arthrodesis (fusion group). There was no significant difference between groups ( P>0.05) in gender, age, disease duration, affected side, preoperative American Orthopaedic Foot and Ankle Society (AOFAS) score, visual analogue scale (VAS) score for pain, intermetatarsal angle (IMA), hallux valgus angle (HVA), or metatarsal adduction angle (MAA). The osteotomy group underwent fixation with screws and/or staples fixation, while the fusion group utilized anatomic fusion plates and trans-articular compression screws. The study compared the following outcome indicators between groups: operation time, pre- and post-operative differences (change values) in AOFAS scores, VAS scores, and radiographic parameters (HVA, MAA), osteotomy healing outcomes, and recurrence of hallux valgus deformity. RESULTS: Both surgical procedures were completed successfully. The operation time was significantly shorter in the fusion group than in the osteotomy group ( P<0.05). All patients were followed up 96-144 months (mean, 116 months). The follow-up time was (129.1±7.2) months in the osteotomy group and (104.4±8.0) months in the fusion group, with no significant difference between groups ( P>0.05). X-ray films revealed the radiographic union in two groups, and the fusion time was significantly shorter in the fusion group than in the osteotomy group ( P<0.05). At last follow-up, both groups demonstrated significant improvements in AOFAS and VAS scores compared to preoperative levels ( P<0.05). However, the differences in the change values of AOFAS and VAS scores between groups were not significant ( P>0.05). During follow-up, 3 cases (20%) of deformity recurrence occurred in the osteotomy group, while no recurrence was observed in the fusion group. There was no significant difference in the incidences of deformity recurrence between groups ( P>0.05). CONCLUSION For severe metatarsus adductus hallux valgus deformities, both multiple metatarsal osteotomy and first metatarsophalangeal arthrodesis can correct the deformity. The former preserves metatarsophalangeal joint mobility but demands high technical proficiency from the surgeon, involves relatively longer operation times, extended bone healing periods, and higher complication incidences. The latter procedure is relatively simpler, facilitates faster postoperative recovery, allows early weight-bearing, and yields more reliable outcomes, though it sacrifices first metatarsophalangeal joint mobility.
Humans ; Osteotomy/methods* ; Hallux Valgus/diagnostic imaging* ; Retrospective Studies ; Arthrodesis/instrumentation* ; Treatment Outcome ; Metatarsal Bones/diagnostic imaging* ; Metatarsophalangeal Joint/diagnostic imaging* ; Male ; Female ; Bone Screws ; Adult ; Middle Aged ; Bone Plates ; Pain Measurement

OBJECTIVETo compare clinical efficacy of individual osteotomy instrument and total knee arthrolplasty (TKA) in treating patients with knee osteoarthritis.

METHODSFrom June 2014 to December 2014, 40 patients with unilateral knee osteoarthritis were randomly divided into two groups and 20 cases were in each group. One group (individual group) were treated with TKA with individual osteotomy instrument,including 5 males and 15 females with an average age of (67.3 ± 6.5) years old; 8 cases on the left side and 12 cases on the right side. Another group (conventional group) were treated with conventional TKA , including 6 males and 14 females with an average age of (66.8 ± 7.3) years old; 9 cases on the left side and 11 cases on the right side. Operative time, blood loss, postoperative HSS score at 6 months, and changes of mechanical alignment before and after operation were analyzed.

RESULTSOperative time in individual group was (79.3 ± 4.7) min, and (83.5 ± 3.2) min in conventional group; blood loss in individual group was (287.1 ± 24.9) ml and (363.4 ± 47.2) ml in conventional group, there were statistical differences between two groups in these two items. There was no significant difference in postoperative HSS score at 6 months between individual group (84.8 ± 3.2) and conventional group (84.2 ± 2.5). Postoperative limb alignment in individual group was (2.8 ± 0.6)°, and (2.8 ± 0.6)° in conventional group, with no significant difference between two groups.

CONCLUSIONTKA with individual osteotomy instrument could reduce operative time and blood loss, but there was no differences in knee function, changes of mechanical alignment compared with TKA.

Adult ; Aged ; Arthroplasty, Replacement, Knee ; methods ; Case-Control Studies ; Female ; Humans ; Knee Joint ; surgery ; Male ; Operative Time ; Osteoarthritis, Knee ; surgery ; Osteotomy ; instrumentation ; methods ; Treatment Outcome

BACKGROUND: Although the valgus subtrochanteric osteotomy is considered as a standard surgical treatment for coxa vara, there is no consensus on the optimal method of fixation and osteotomy technique. Fixation of the osteotomy has been achieved by various methods including external fixation and internal fixation with pins and cerclage and a variety of plates. The aim of this study is the evaluation of the results of developmental coxa treated by Y intertrochanteric valgus osteotomy fixed with a T-buttress plate compared with other methods of fixation in the literature. METHODS: Eighteen corrective valgus intertrochanteric femoral osteotomies were performed in 18 patients (18 hips) for treatment of unilateral developmental coxa vara deformity and fixed with a T plate. There were 12 males and 6 females. The right hip was affected in 10 patients and the left hip in 8 patients. Clinically, patients were evaluated by Larson hip score. Radiographically, anteroposterior view of the pelvis and frog leg lateral views of the affected hip were taken preoperatively and compared with the findings at the final follow-up. RESULTS: The average follow-up was 29 months (range, 24 to 36 months). Clinical results showed improvement of the mean Larson hip score from 57.8 to 97.0 (p < 0.001). Radiological results showed that all osteotomies were completely united in 2.4 months (range, 2 to 3 months) with the achievement of the planned correction angle. The average correction of Hilgenreiner's epiphyseal angle improved from 78.2° to 27.8° (p < 0.001) at the final follow-up. The femoral neck shaft angle was improved from 93.7° to 129.9° (p < 0.001) at the final follow-up. Shortening of the affected limb was corrected from 2.8 cm to 1.3 cm (p < 0.001) at the last follow-up. No major serious complications were recorded in the present study. CONCLUSIONS: Intertrochanteric valgus osteotomy of the proximal femur fixed with a T plate may be efficient for treatment of developmental coxa vara. With careful planning, it can result in a low complication rate and insignificant or minimal recurrence rate.
*Bone Plates ; Child ; Child, Preschool ; Coxa Vara/*surgery ; Female ; Femur Neck/*surgery ; Follow-Up Studies ; *Fracture Fixation, Internal/instrumentation/methods/statistics & numerical data ; Humans ; Male ; *Osteotomy/methods/statistics & numerical data

PURPOSE: The aim of this study was to compare clinical and radiographic outcomes of proximal opening wedge osteotomy using a straight versus oblique osteotomy. MATERIALS AND METHODS: We retrospectively reviewed 104 consecutive first metatarsal proximal opening wedge osteotomies performed in 95 patients with hallux valgus deformity. Twenty-six feet were treated using straight metatarsal osteotomy (group A), whereas 78 feet were treated using oblique metatarsal osteotomy (group B). The hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal articular angle, and distance from the first to the second metatarsal (distance) were measured for radiographic evaluation, whereas the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was used for clinical evaluation. RESULTS: Significant corrections in the HVA, IMA, and distance from the first to the second metatarsal were obtained in both groups at the last follow-up (p<0.001). There was no difference in the mean IMA correction between the 2 groups (6.1+/-2.7degrees in group A and 6.0+/-2.1degrees in group B). However, a greater correction in the HVA and distance from the first to the second metatarsal were found in group B (HVA, 13.2+/-8.2degrees; distance, 25.1+/-0.2 mm) compared to group A (HVA, 20.9+/-7.7degrees; distance, 28.1+/-0.3 mm; p<0.001). AOFAS scores were improved in both groups. However, group B demonstrated a greater improvement relative to group A (p=0.005). CONCLUSION: Compared with a straight first metatarsal osteotomy, an oblique first metatarsal osteotomy yielded better clinical and radiological outcomes.
Adult ; Aged ; Bone Plates ; Epiphyses/surgery ; Ethnic Groups ; Female ; Foot ; Fracture Fixation, Internal/*instrumentation ; Hallux Valgus/radiography/*surgery ; Humans ; Lower Extremity ; Male ; Metatarsal Bones/*radiography/*surgery ; Middle Aged ; Osteotomy/*methods ; Range of Motion, Articular ; Retrospective Studies ; Treatment Outcome ; Upper Extremity

PURPOSE: The object of this study was to evaluate entrance angle effects on femoral tunnel length and cartilage damage during anteromedial portal drilling using three-dimensional computer simulation. MATERIALS AND METHODS: Data was obtained from an anatomic study performed using 16 cadaveric knees. The anterior cruciate ligament femoral insertion was dissected and the knees were scanned by computer tomography. Tunnels with different of three-dimensional entrance angles were identified using a computer simulation. The effects of different entrance angles on the femoral tunnel length and medial femoral cartilage damage were evaluated. Specifically, tunnel length and distance from the medial femoral condyle to a virtual cylinder of the femoral tunnel were measured. RESULTS: In tunnels drilled at a coronal angle of 45degrees, an axial angle of 45degrees, and a sagittal angle of 45degrees, the mean femoral tunnel length was 39.5+/-3.7 mm and the distance between the virtual cylinder of the femoral tunnel and the medial femoral condyle was 9.4+/-2.6 mm. The tunnel length at a coronal angle of 30degrees, an axial angle of 60degrees, and a sagittal angle of 45degrees, was 34.0+/-2.9 mm and the distance between the virtual cylinder of the tunnel and the medial femoral condyle was 0.7+/-1.3 mm, which was significantly shorter than the standard angle (p<0.001). CONCLUSION: Extremely low and high entrance angles in both of axial plane and coronal plane produced inappropriate tunnel angles, lengths and higher incidence of cartilage damage. We recommend that angles in proximity to standard angles be chosen during femoral tunnel drilling through the anteromedial portal.
Aged ; Anterior Cruciate Ligament/*surgery ; Anterior Cruciate Ligament Reconstruction/instrumentation/*methods ; Cadaver ; Computer Simulation ; Female ; Femur/anatomy & histology/*surgery ; Humans ; Imaging, Three-Dimensional ; Knee Joint/radiography/*surgery ; Male ; Middle Aged ; Osteotomy/*methods ; Outcome and Process Assessment (Health Care) ; Patient Positioning ; Surgical Instruments ; Tomography, X-Ray Computed