Pyroptosis, an inflammatory caspase-dependent programmed cell death, plays a vital role in maintaining tissue homeostasis and activating inflammatory responses. Orthodontic tooth movement (OTM) is an aseptic force-induced inflammatory bone remodeling process mediated by the activation of periodontal ligament (PDL) progenitor cells. However, whether and how force induces PDL progenitor cell pyroptosis, thereby influencing OTM and alveolar bone remodeling remains unknown. In this study, we found that mechanical force induced the expression of pyroptosis-related markers in rat OTM and alveolar bone remodeling process. Blocking or enhancing pyroptosis level could suppress or promote OTM and alveolar bone remodeling respectively. Using Caspase-1^-/- mice, we further demonstrated that the functional role of the force-induced pyroptosis in PDL progenitor cells depended on Caspase-1. Moreover, mechanical force could also induce pyroptosis in human ex-vivo force-treated PDL progenitor cells and in compressive force-loaded PDL progenitor cells in vitro, which influenced osteoclastogenesis. Mechanistically, transient receptor potential subfamily V member 4 signaling was involved in force-induced Caspase-1-dependent pyroptosis in PDL progenitor cells. Overall, this study suggested a novel mechanism contributing to the modulation of osteoclastogenesis and alveolar bone remodeling under mechanical stimuli, indicating a promising approach to accelerate OTM by targeting Caspase-1.
Animals ; Humans ; Mice ; Rats ; Bone Remodeling/physiology* ; Caspase 1 ; Periodontal Ligament ; Pyroptosis ; Tooth Movement Techniques

Background: Orthodontic tooth movement occurs due to bone resorption and apposition on the pressure and tension side of the PDL. The transcription factors associated with osteoclast differentiation are NFATc1 while osteoblast differentiation is associated with RUNX2. The optimum force of orthodontic tooth movement can move the teeth to the desired position, without causing discomfort and tissue damage to the patient. Objective: This study aims to analyse the effect of gradually increasing force on orthodontic tooth movement (by evaluating the NFATc1 and RUNX2 expression) in rats. Methods: This research is an in vivo experimental study with a post-test control group design. Twenty-eight healthy male adult Wistar rats (Rattus novergicus) aged 4-5 months with body weights 200-250 g rats were divided into seven study groups. Treatment groups in this study are given the force (by applying a closed coil spring between the maxillary central incisor and the maxillary first molar) of 5 g, 5-10 g, 10 g, and 10-20 g with the duration of treatment in 14 and 28 days. After the treatment day was finished, the alveolar bone tissue was isolated and investigated by immunohistochemical methods. Results: Indicate a significant difference between the control and all treatment groups of NFATc1 (p=0.003; p=0.000; p:0.010; p=0.001; p=0.001; p=0.000) and RUNX2 with groups of 10 g/14 days, 10 g/28 days, 5 g/28 days, 10 g/14 days,10-20 g/28 days (p=0.001; p=0.000; p=0.000; p=0.017; p=0.014; p=0.000) values. Conclusion Gradually increasing force affects orthodontic tooth movement by inducing bone resorption (high expression of NFATc1) in the pressure area and bone apposition (high expression of RUNX2) in the tension area. Applying heavy force by initially applying light force could inhibit hyalinization.
Orthodontic Tooth Movement ; Tooth Movement Techniques

OBJECTIVES: This study aimed to compare the effects of virtual adjustment on occlusal interferences in mandibular posterior single crown and three-unit bridge restorations by using the mandibular movement track and the movement parameters of a virtual articulator. METHODS: Twenty-two participants were recruited. Digital casts of the maxillary and mandibular arches were obtained using an intraoral scanner, and the jaw registration system was used to record the data of the mandibular movement track and the movement parameters of the articulator. Four kinds of restorations with 0.3 mm occlusal interferences were designed with dental design software. In particular, single crowns were designed for teeth 44 and 46, whereas three-unit bridges were designed for teeth 44-46 and 45-47, and the corresponding natural teeth were virtually extracted. Virtual adjustment of the restorations was performed using two dynamic occlusal recordings, namely, the mandibular movement track and the movement parameters of the virtual articulator. A reverse-engineering software was used to measure the root-mean-square of the three-dimensional deviation of the occlusal surfaces between natural teeth and the adjusted restorations. The differences between the two methods of virtual-occlusion adjustment were compared and analyzed. RESULTS: For the same group of restorations, the three-dimensional deviation of the mandibular movement track group were lower than those of the virtual articulator group, and the differences were statistically significant (P<0.05). For the four groups of restorations adjusted by the same method, the three-dimensional deviation of the 46-tooth single crown was the largest and the smallest three-dimensional deviation was that of the 44-tooth single crown. Statistical differences existed between the 44-tooth single crown and the other groups (P<0.05). CONCLUSIONS For the occlusal design of posterior single crown and three-unit bridge, the mandibular movement track could be a more effective approach to virtual occlusal adjustment than the movement parameters of the virtual articulator.
Humans ; Mouth, Edentulous ; Occlusal Adjustment ; Jaw Relation Record ; Dental Articulators ; Software

OBJECTIVES: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group. METHODS: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis. RESULTS: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group. CONCLUSIONS The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.
Humans ; Malocclusion, Angle Class II/therapy* ; Mandibular Advancement ; Orthodontics, Corrective ; Orthodontic Appliances, Functional ; Mandible ; Orthodontic Appliances, Removable ; Cephalometry

In dentistry, orthodontic root resorption is a long-lasting issue with no effective treatment strategy, and its mechanisms, especially those related to senescent cells, remain largely unknown. Here, we used an orthodontic intrusion tooth movement model with an L-loop in rats to demonstrate that mechanical stress-induced senescent cells aggravate apical root resorption, which was prevented by administering senolytics (a dasatinib and quercetin cocktail). Our results indicated that cementoblasts and periodontal ligament cells underwent cellular senescence (p21⁺ or p16⁺) and strongly expressed receptor activator of nuclear factor-kappa B (RANKL) from day three, subsequently inducing tartrate-resistant acid phosphatase (TRAP)-positive odontoclasts and provoking apical root resorption. More p21⁺ senescent cells expressed RANKL than p16⁺ senescent cells. We observed only minor changes in the number of RANKL⁺ non-senescent cells, whereas RANKL⁺ senescent cells markedly increased from day seven. Intriguingly, we also found cathepsin K⁺p21⁺p16⁺ cells in the root resorption fossa, suggesting senescent odontoclasts. Oral administration of dasatinib and quercetin markedly reduced these senescent cells and TRAP⁺ cells, eventually alleviating root resorption. Altogether, these results unveil those aberrant stimuli in orthodontic intrusive tooth movement induced RANKL⁺ early senescent cells, which have a pivotal role in odontoclastogenesis and subsequent root resorption. These findings offer a new therapeutic target to prevent root resorption during orthodontic tooth movement.
Rats ; Animals ; Root Resorption/prevention & control* ; Senotherapeutics ; Stress, Mechanical ; Dasatinib/pharmacology* ; Quercetin/pharmacology* ; Osteoclasts ; Tooth Movement Techniques ; Periodontal Ligament ; RANK Ligand

Objective: To investigate the influence of light and heavy bite force on the mandibular movement trajectories, and the influence of bite force on virtual occlusal pre-adjustment of digital full crown. Methods: From October 2021 to March 2022, 10 postgraduate volunteers (3 males and 7 females, aged 22-26 years) were recruited from Peking University School and Hospital of Stomatology. Maxillary and mandibular digital models of the participants were obtained by intraoral scanning. Jaw relations were digitally transferred under heavy bite force and mandibular movement trajectories under light and heavy bite force were recorded by jaw motion analyser. Three mandibular markers were chosen, namely the mesial proximal contact point of the central incisor (incisal point) and the mesial buccal cusp tips of the bilateral first molars. The three-dimensional displacements of the markers under two kinds of bite force in the intercuspal position (ICP), the sagittal projection of the three-dimensional displacements in the protrusive edge-to-edge position, and the coronal projection of the three-dimensional displacements in the lateral edge-to-edge position of upper and lower posterior teeth were measured. Single-sample t-test was used to compare the three-dimensional displacements and the corresponding sagittal projection and coronal projection with 0, respectively. The left maxillary central incisor and left mandibular first molar were virtually prepared by the reverse engineering software. Then dental design software was used to design digital full crown using the copy method. The mandibular movement trajectories under light and heavy bite force were separately used to guide virtual occlusal pre-adjustment. The three-dimensional deviations (mean deviations and root mean square) between the lingual surface of the left maxillary central incisor or the occlusal surface of the left mandibular first molar and that of the natural tooth before preparation were calculated (light bite force group and heavy bite force group), and the differences between the two groups were compared by the paired t-test. Results: Under the two kinds of bite force, the three-dimensional displacements of the markers in the ICP were (0.217±0.135), (0.210±0.133) and (0.237±0.101) mm, respectively; the sagittal projection of the three-dimensional displacements of the markers in the protrusive edge-to-edge position were (0.204±0.133), (0.288±0.148) and (0.292±0.136) mm, respectively; the coronal projection of the three-dimensional displacements of the mesial buccal cusp tips of the bilateral first molars in the lateral edge-to-edge position were (0.254±0.140) and (0.295±0.190) mm, respectively. The differences between the above displacements and 0 were statistically significant (P<0.05). The results of occlusal pre-adjustment showed that the mean deviations of the lingual surface of the left maxillary central incisor in the light and heavy bite force groups were (0.215±0.036) and (0.195±0.041) mm (t=3.95, P=0.004), respectively. The mean deviations of the occlusal surface of the left mandibular first molar were (0.144±0.084) and (0.100±0.096) mm (t=0.84, P=0.036), respectively. Conclusions: Both the light and heavy bite force have an influence on the mandibular movement trajectories. Virtual occlusal pre-adjustment of prostheses with mandibular movement trajectories under heavy bite force can obtain morphology of lingual or occlusal surfaces closer to the natural teeth before preparation.
Male ; Female ; Humans ; Bite Force ; Tooth ; Mandible ; Molar ; Occlusal Adjustment

Obstructive sleep apnea hypopnea syndrome (OSAHS) is a common sleep respiratory disorder characterized by upper respiratory collapse during sleep, with a high prevalence and potentially fatal complications. Currently, maxillary transverse deficiency are considered to be an important pathogenic factor of OSAHS. For patients with poor compliance with positive airway pressure therapy, rapid maxillary expansion can increase the volume and ventilation of the upper respiratory tract, which is an alternative treatment. This paper reviewed the current research on surgically assisted rapid palatal expansion, miniscrew assisted rapid palatal expansion, and distraction osteogenesis maxillary expansion in the treatment of adult OSAHS. By comparing the indications, contraindications, complications, efficacy and long-term stability of the three treatment methods, it provided reference for treatment of patients with OSAHS.
Adult ; Humans ; Nose ; Palatal Expansion Technique ; Palate ; Sleep Apnea, Obstructive/surgery* ; Syndrome

OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.
Finite Element Analysis ; Molar ; Bicuspid ; Periodontal Ligament ; Tooth Movement Techniques/methods* ; Orthodontic Appliances, Removable

OBJECTIVE: To investigate the effect of human subcutaneous adipose-derived stem cells (hADSCs) local transplantation on orthodontically induced root resorption (OIRR) and provide theoretical and experimental basis for the clinical application of hADSCs to inhibit OIRR. METHODS: Forty 8-week-old male Sprague Dawley rats were randomly divided into experimental group and control group, with 20 rats in each group, to establish the first molar mesial orthodontic tooth movement (OTM) model of rat right maxillary. The rats in the experimental group were injected with 25 μL of cell suspension containing 2.5×10 ⁵ hADSCs on the 1st, 4th, 8th, and 12th day of modeling, while the rats in the control group were injected with 25 μL of PBS. The rat maxillary models were obtained before and after 7 and 14 days of force application, and 10 rats in each group were killed and sampled after 7 and 14 days of force application. The OTM distance was measured by stereomicroscope, the root morphology of the pressure side was observed by scanning electron microscope and the root resorption area ratio was measured. The root resorption and periodontal tissue remodeling of the pressure side were observed by HE staining and the root resorption index was calculated. The number of cementoclast and osteoclast in the periodontal tissue on the pressure side was counted by tartrate resistant acid phosphatase staining. RESULTS: The TOM distance of both groups increased with the extension of the force application time, and there was no significant difference ( P<0.05). There was no significant difference in OTM distance between the experimental group and the control group after 7 and 14 days of force application ( P>0.05). Scanning electron microscope observation showed that small and shallow scattered resorption lacunae were observed on the root surface of the experimental group and the control group after 7 days of force application, and there was no significant difference in the root resorption area ratio between the two groups ( P>0.05); after 14 days of application, the root resorption lacunae deepened and became larger in both groups, and the root resorption area ratio in the experimental group was significantly lower than that in the control group ( P<0.05). The range and depth of root absorption in the experimental group were smaller and shallower than those in the control group, and the root absorption index in the experimental group was significantly lower than that in the control group after 14 days of force application ( P<0.05). The number of cementoclast in the experimental group was significantly lower than that in the control group after 7 and 14 days of force application ( P<0.05); the number of osteoclasts in the experimental group was significantly lower than that in the control group after 14 days of force application ( P<0.05). CONCLUSION Local transplantation of hADSCs may reduce the area and depth of root resorption by reducing the number of cementoclasts and osteoclasts during OTM in rats, thereby inhibiting orthodontic-derived root resorption.
Rats ; Male ; Humans ; Animals ; Root Resorption/therapy* ; Rats, Sprague-Dawley ; Osteoclasts ; Tooth Movement Techniques ; Stem Cells

Over the past decade, dramatic progress has been made in dental research areas involving laser therapy. The photobiomodulatory effect of laser light regulates the behavior of periodontal tissues and promotes damaged tissues to heal faster. Additionally, photobiomodulation therapy (PBMT), a non-invasive treatment, when applied in orthodontics, contributes to alleviating pain and reducing inflammation induced by orthodontic forces, along with improving tissue healing processes. Moreover, PBMT is attracting more attention as a possible approach to prevent the incidence of orthodontically induced inflammatory root resorption (OIIRR) during orthodontic treatment (OT) due to its capacity to modulate inflammatory, apoptotic, and anti-antioxidant responses. However, a systematic review revealed that PBMT has only a moderate grade of evidence-based effectiveness during orthodontic tooth movement (OTM) in relation to OIIRR, casting doubt on its beneficial effects. In PBMT-assisted orthodontics, delivering sufficient energy to the tooth root to achieve optimal stimulation is challenging due to the exponential attenuation of light penetration in periodontal tissues. The penetration of light to the root surface is another crucial unknown factor. Both the penetration depth and distribution of light in periodontal tissues are unknown. Thus, advanced approaches specific to orthodontic application of PBMT need to be established to overcome these limitations. This review explores possibilities for improving the application and effectiveness of PBMT during OTM. The aim was to investigate the current evidence related to the underlying mechanisms of action of PBMT on various periodontal tissues and cells, with a special focus on immunomodulatory effects during OTM.
Humans ; Inflammation ; Low-Level Light Therapy/adverse effects* ; Orthodontics ; Root Resorption/therapy* ; Tooth Movement Techniques