BACKGROUND AND OBJECTIVE

Orthodontic brackets predispose dental biofilm accumulation causing caries and gingivitis. Chlorhexidine is an adjunct to mechanical plaque removal, but has side-effects (tooth staining, bacterial resistance) due to long term use. This study tested the efficacy of Photodynamic Therapy, which produces reactive oxygen species, to reduce Streptococcus mutans in dental biofilm on orthodontic brackets.

A 5-day S. mutans biofilm was grown on forty enamel-bracket specimens. Thirty-nine specimens were randomized to three treatment groups: A. Distilled Water; B. 0.12% Chlorhexidine (CHX); C. Photodynamic Therapy (PDT) using Toluidine Blue O (TBO) as a photosensitizer, activated by red LED (630nm). After treatment, one random specimen from each group was viewed under Environmental Scanning Electron Microscopy (ESEM); the other 12 specimens, biofilms were collected, weighed, and cultured onto BHI agar plates to determine the number of CFU/mg. For baseline evaluation, one clean and one untreated specimens were preserved for ESEM.

Based on Tukey HSD test, group A had the most S. mutans (37.0573 CFU/mg) and was significantly different (pCONCLUSION

Both Photodynamic Therapy and 0.12% Chlorhexidine showed a significant reduction of S. mutans in dental biofilm on orthodontic brackets. However, there is no significant difference between them in reducing S. mutans CFU/mg. Photodynamic therapy could be an alternative adjunctive tool to mechanical removal of plaque adhered to orthodontic brackets.

OBJECTIVE: To establish a three-dimensional finite element model of a digital wire loop space maintainer for the mandible and primary tooth loss, in order to investigate the stress, deformation, and shear force experienced by patients with the loss of the second primary molar when wearing the wire loop space maintainer. METHODS: Cone beam computed tomography (CBCT) scans were performed on the patients to create a digital model of the mandible with the absence of the second primary molar using Mimics 21.0 software. A digital model integrating the crown's retention and the wire loop structure of the full crown and ring wire loop space maintainer was constructed using pediatric space maintainer design software, utilizing three different materials: cobalt-chromium alloy, polyether ether ketone (PEEK), and titanium alloy. In ANSYS Work Beach 2023 R2 software, vertical loads of 70 N, tilted 45° along the long axis of the tooth loads of 70 N, and a 10 N load on the surface of the wire loop were applied to the occlusal surfaces of models 46 and 84, simulating centric and lateral occlusions during chewing with the wire loop space maintainer in place. The stress states of the wire loop space maintainer and supporting teeth were analyzed. RESULTS: Under various loading conditions, the maximum principal stress of the ring wire loop space maintainer was significantly lower than that of the full crown. Stress contour maps indicated that the peak of the maximum principal stress occurred at the junction of the wire loop and crown structure, indicating that this area was more susceptible to fracture. The ring wire loop space maintainer made from PEEK material exhibited the lowest maximum shear stress on the internal organizational surfaces, with equivalent stresses of 23.18 MPa and 36.35 MPa for models 46 and 84, respectively. Stress contour maps demonstrated that the maximum stress on tooth 46 was located at its mesial, while the maximum stress on tooth 84 was situated near the root area on its distal, in contact with the wire loop space maintainer. CONCLUSION In cases of second primary molar loss, wearing the digital ring wire loop space maintainer can effectively distribute stress, and the ring wire loop space maintainer made from PEEK material reduces the stress experienced by supporting teeth to some extent, demonstrating its superiority in clinical application.
Finite Element Analysis ; Humans ; Tooth, Deciduous ; Cone-Beam Computed Tomography ; Space Maintenance, Orthodontic/methods* ; Imaging, Three-Dimensional ; Orthodontic Wires ; Dental Stress Analysis ; Mandible ; Stress, Mechanical

Clear aligner treatment is a novel technique in current orthodontic practice. Distinct from traditional fixed orthodontic appliances, clear aligners have different material features and biomechanical characteristics and treatment efficiencies, presenting new clinical challenges. Therefore, a comprehensive and systematic description of the key clinical aspects of clear aligner treatment is essential to enhance treatment efficacy and facilitate the advancement and wide adoption of this new technique. This expert consensus discusses case selection and grading of treatment difficulty, principle of clear aligner therapy, clinical procedures and potential complications, which are crucial to the clinical success of clear aligner treatment.
Humans ; Consensus ; Orthodontic Appliance Design ; Orthodontic Appliances, Removable ; Tooth Movement Techniques/methods* ; Malocclusion/therapy* ; Orthodontics, Corrective/instrumentation*

OBJECTIVES: Magnetic resonance imaging (MRI) was used to study the efficacy of modified anterior splint (MAS) combined with anterior repositioning splint (ARS) in maintaining the normal disk-condyle relationship. METHODS: We obtained clinical and imaging data of 10 patients with acute anterior disk displacement without reduction (ADDwoR) of the temporomandibular joint undergoing successful mandibular manipulation in the Affiliated Stomatological Hospital, Nanchang University from January to June 2024. The MAS and ARS were used for subsequent treatment. Maximum active mouth opening (MMO) and visual analogue score (VAS) were recorded before treatment and 2 weeks, 1 month, and 3 months after treatment. The changes in the disk-condyle relationship, disk-condyle angle, joint effusion, and double contour sign before and after treatment were analyzed through MRI. RESULTS: Three months after treatment, the MMO increased from 28.90 mm to 46.85 mm, VAS decreased from 4.68 to 0.61, and the disk-condyle angle decreased from 58.84° to 25.99°. MRI analysis found that 6 patients showed normal disk-condyle relationship, 2 patients exhibited displacement with reduction, and 2 patients exhibited ADDwoR. The disk-condyle angle was 58.84° before treatment and 25.99° after treatment. CONCLUSIONS The MAS combined with ARS could further stabilize the coordinated disk-condyle relationship and reduce the recurrence rate.
Humans ; Male ; Magnetic Resonance Imaging ; Female ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Splints ; Middle Aged ; Mandible ; Temporomandibular Joint Disc ; Occlusal Splints ; Temporomandibular Joint ; Young Adult ; Joint Dislocations/therapy*

BACKGROUND AND OBJECTIVE

Orthodontic brackets predispose dental biofilm accumulation causing caries and gingivitis. Chlorhexidine is an adjunct to mechanical plaque removal, but has side-effects (tooth staining, bacterial resistance) due to long term use. This study tested the efficacy of Photodynamic Therapy, which produces reactive oxygen species, to reduce Streptococcus mutans in dental biofilm on orthodontic brackets.

A 5-day S. mutans biofilm was grown on forty enamel-bracket specimens. Thirty-nine specimens were randomized to three treatment groups: A. Distilled Water; B. 0.12% Chlorhexidine (CHX); C. Photodynamic Therapy (PDT) using Toluidine Blue O (TBO) as a photosensitizer, activated by red LED (630nm). After treatment, one random specimen from each group was viewed under Environmental Scanning Electron Microscopy (ESEM); the other 12 specimens, biofilms were collected, weighed, and cultured onto BHI agar plates to determine the number of CFU/mg. For baseline evaluation, one clean and one untreated specimens were preserved for ESEM.

Based on Tukey HSD test, group A had the most S. mutans (37.0573 CFU/mg) and was significantly different (p < 0.05) from groups B (0.1712 CFU/mg) and C (1.1193 CFU/mg), where both showed less bacteria than group A. The statistical difference between groups B and C was insignificant. ESEM images showed specimen A covered with more abundant and denser S. mutans biofilm than specimens B and C, with almost similar morphology showing sparse, less dense, and disintegrated biofilm with unclear cellular walls and presence of amorphous masses.

Both Photodynamic Therapy and 0.12% Chlorhexidine showed a significant reduction of S. mutans in dental biofilm on orthodontic brackets. However, there is no significant difference between them in reducing S. mutans CFU/mg. Photodynamic therapy could be an alternative adjunctive tool to mechanical removal of plaque adhered to orthodontic brackets.

Background and Objective: According to microbiological investigations, microorganisms, especially Lactobacillus strains, considerably increase after using fixed orthodontic appliances. One of the Lactobacilli bacteria found in the oral cavity is Lactobacillus acidophilus. The purpose of this study was to compare the adhesion of Lactobacillus acidophilus to metal and ceramic brackets with coated and uncoated nickel titanium (NiTi) orthodontic archwires. Methods: Forty () samples were divided into four groups for this in vitro study: 10 metal brackets with coated NiTi archwire, 10 metal brackets with uncoated NiTi archwire, 10 ceramic brackets with coated NiTi archwire, and 10 ceramic brackets with uncoated NiTi archwire. Elisa Reader was used to count the number of Lactobacillus acidophilus attachments, and the one-way ANOVA and Tukey HSD tests were used to analyze all results. Results: The results showed significant differences in the attachment of Lactobacillus Acidophilus between the ceramic bracket and coated NiTi archwire sample groups and the metal bracket and uncoated NiTi archwire sample groups (P= 0.01). The adherence of Lactobacillus acidophilus to the ceramic bracket and uncoated NiTi archwire group was higher than the metal bracket and coated NiTi archwire group, and the metal bracket and uncoated NiTi archwire group. The attachment of Lactobacillus acidophilus to the metal bracket and uncoated NiTi archwire groups was the lowest of all sample groups in this study. Conclusion The highest Lactobacillus acidophilus adherence was in the ceramic bracket with coated NiTi archwire group compared to the other three groups.
Lactobacillus acidophilus ; Orthodontic Brackets ; Orthodontic Wires

OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.
Finite Element Analysis ; Molar ; Bicuspid ; Periodontal Ligament ; Tooth Movement Techniques/methods* ; Orthodontic Appliances, Removable

OBJECTIVES: To evaluate the effects of a Twin-block appliance on the condyles of patients with ClassⅡmalocclusion by conducting a systematic review and a Meta-analysis. METHODS: Pubmed, Embase, Cochrane Library, Chinese BioMedical Literature Database, China National Knowledge Infrastructure, and VIP Database were electronically searched. Randomized controlled trials, controlled clinical trials, and single-arm trials on condylar changes produced by a Twin-block appliance in patients with ClassⅡmalocclusion were included. Two reviewers independently extracted and assessed the risk of bias. Meta-analyses were conducted with Review Manager 5.3. RESULTS: Eight studies were included; among which, seven were of high quality. After treatment with a twin block appliance, condyles moved anteriorly. The anterior joint spaces decreased (P<0.000 01), whereas the posterior spaces increased (P<0.000 01). The superior spaces were not changed (P=0.11). Moreover, a significant difference was observed in the increase of the condylar space index (P<0.000 01). After treatment, the anteroposterior diameters of the condyles and condylar height increased (P=0.000 2 and P<0.000 01, respectively). By contrast, no significant changes were discovered in the medial external diameters of the condyles (P=0.42). CONCLUSIONS A Twin-block appliance can promote the growth of a condyle in the posterior and upper direction and move it forward in favor of the correction of Class Ⅱ malocclusion.
Humans ; Malocclusion, Angle Class II/therapy* ; Temporomandibular Joint ; Bone and Bones ; China ; Orthodontic Appliances, Functional ; Cephalometry

OBJECTIVES: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group. METHODS: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis. RESULTS: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group. CONCLUSIONS The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.
Humans ; Malocclusion, Angle Class II/therapy* ; Mandibular Advancement ; Orthodontics, Corrective ; Orthodontic Appliances, Functional ; Mandible ; Orthodontic Appliances, Removable ; Cephalometry

In the orthodontics process, intervention and sliding of an orthodontic bracket during the orthodontic process can arise large response of the labio-cheek soft tissue. Soft tissue damage and ulcers frequently happen at the early stage of orthodontic treatment. In the field of orthodontic medicine, qualitative analysis is always carried out through statistics of clinical cases, while quantitative explanation of bio-mechanical mechanism is lacking. For this purpose, finite element analysis of a three-dimensional labio-cheek-bracket-tooth model is conducted to quantify the bracket-induced mechanical response of the labio-cheek soft tissue, which involves complex coupling of contact nonlinearity, material nonlinearity and geometric nonlinearity. Firstly, based on the biological composition characteristics of labio-cheek, a second-order Ogden model is optimally selected to describe the adipose-like material of the labio-cheek soft tissue. Secondly, according to the characteristics of oral activity, a two-stage simulation model of bracket intervention and orthogonal sliding is established, and the key contact parameters are optimally set. Finally, the two-level analysis method of overall model and submodel is used to achieve efficient solution of high-precision strains in submodels based on the displacement boundary obtained from the overall model calculation. Calculation results with four typical tooth morphologies during orthodontic treatment show that: ① the maximum strain of soft tissue is distributed along the sharp edges of the bracket, consistent with the clinically observed profile of soft tissue deformation; ② the maximum strain of soft tissue is reduced as the teeth align, consistent with the clinical manifestation of common damage and ulcers at the beginning of orthodontic treatment and reduced patient discomfort at the end of treatment. The method in this paper can provide reference for relevant quantitative analysis studies in the field of orthodontic medical treatment at home and abroad, and further benefit to the product development analysis of new orthodontic devices.
Humans ; Periodontal Ligament/physiology* ; Orthodontic Wires ; Cheek ; Ulcer ; Tooth ; Finite Element Analysis