This review describes a psychological support service designed to address post-traumatic stress disorder in workers impacted by workplace injuries, assisting in their recovery and facilitating their return to work. It explores the rationale and context behind establishing trauma counseling centers for these individuals, along with the status, roles, future directions, and recommendations for these centers. The review details the operational framework and functions of the workplace injury trauma management program, the scope of the impacts of such injury, the groups targeted for crisis intervention, and the psychological interventions tailored to each stage of recovery. Initiated as a pilot project in 2018, trauma counseling centers for workers have gradually become more common, with 23 centers in operation across Korea as of 2024.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background/Aims: Elevated troponin levels predict in-hospital mortality and influence decisions regarding thrombolytic therapy in patients with acute pulmonary embolism (PE). However, the usefulness of high-sensitivity troponin T (hsTnT) regarding PE remains uncertain. We aimed to establish the optimal cut-off level and compare its performance for precise risk stratification. Methods: 374 patients diagnosed with acute PE were reviewed. PE-related adverse outcomes, a composite of PE-related deaths, cardiopulmonary resuscitation incidents, systolic blood pressure < 90 mmHg, and all-cause mortality within 30 days were evaluated. The optimal hsTnT cut-off for all-cause mortality, and the net reclassification index (NRI) was used to assess the incremental value in risk stratification. Results: Among 343 normotensive patients, 17 (5.0%) experienced all-cause mortality, while 40 (10.7%) had PE-related adverse outcomes. An optimal hsTnT cut-off value of 60 ng/L for all-cause mortality (AUC 0.74, 95% CI 0.61–0.85, p < 0.001) was identified, which was significantly associated with PE-related adverse outcomes (OR 4.07, 95% CI 2.06–8.06, p < 0.001). Patients with hsTnT ≥ 60 ng/L were older, hypotensive, had higher creatinine levels, and right ventricular dysfunction signs. Combining hsTnT ≥ 60 ng/L with simplified pulmonary embolism severity index ≥1 provided additional prognostic information. Reclassification analysis showed a significant shift in risk categories, with an NRI of 1.016 ± 0.201 (p < 0.001). Conclusions We refined troponin’s predictive value in patients with acute PE, proposing a new cut-off value of hsTnT ≥ 60 ng/L. Validation through large-scale studies is essential to offer clinically useful guidance for managing patient population.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Background: Syphilis, an infectious and chronic disease primarily transmitted through sexual contact, is caused by the spirochete bacterium Treponema pallidum. Although the introduction of penicillin has significantly reduced its incidence, syphilis continues to have a substantial impact on public health. Objective: The purpose of this study was to investigate trends in syphilis and to analyze its epidemiologic, clinical, and serologic characteristics. Methods: We retrospectively reviewed the medical records of 330 patients who tested positive for the Venereal Disease Research Laboratory (VDRL) test, including 192 patients who received a diagnosis of syphilis and who visited the Dermatology Department of Gachon University Gil Medical Center between 2000 and 2023. Statistical analyses were performed to evaluate trends in syphilis incidence and related variable factors, such as sex, age, and serological results. Results: The average age of the 192 syphilis patients was 34.18±15.81 years, with a male-to-female ratio of 1:1.2. The most prevalent age group was 20∼29 years, comprising 71 patients (37.0%). Over time, the incidence of syphilis demonstrated a decreasing trend (p＜0.001). A total of 105 patients (54.7%) were diagnosed with symptomatic syphilis, with a male-to-female ratio of 1.5:1. The proportion of symptomatic syphilis patients tended to decrease with increasing age (p＜0.05). Maculopapular syphilis was the most frequently observed presentation in secondary syphilis (36.2%). The proportion of symptomatic syphilis patients significantly increased with higher VDRL titers (p＜0.001). Conclusion The incidence of syphilis has shown a consistent decline over the past two decades. However, the relatively higher prevalence among younger age groups indicates the need for continued public health efforts.

Regorafenib is an oral multikinase inhibitor used to treat advanced solid tumors, including hepatocellular carcinoma (HCC), gastrointestinal stromal tumors, and colorectal cancer. Adverse dermatological reactions are common after regorafenib treatment. The most frequent cutaneous adverse reaction is hand-foot skin reaction (HFSR). Compared to HFSR, reports on adverse reactions on the scrotum associated with regorafenib are limited. Only a few cases of adverse reactions on the scrotum associated with HFSR have been reported. We present the case of a 55-year-old male patient with a 1-year history of scrotal dermatitis and HFSR, who had been undergoing treatment for HCC.One year after administration of oral regorafenib (160 mg/d), multiple vesicles, pustules, desquamation, and hyperkeratosis developed on both hands and feet, accompanied by scaly erythematous plaques around the scrotum.The lesions improved after two weeks of treatment with topical and systemic steroids. Herein, we report a rare case of scrotal dermatitis associated with regorafenib-induced HFSR.

In forensic science, age estimation is essential for identifying both living and deceased individuals. Teeth and jawbones serve as reliable indicators due to their gradual age-related changes and resistance to environmental factors. Among the various methods, attrition and pulp cavity size are commonly used to estimate adult age. This study aimed to enhance the accuracy of age estimation in Korean adults by combining measurements of tooth attrition and pulp cavity size obtained from panoramic radiographs of mandibular first molars. We evaluated 118 patients (62 male, 56 female) who visited Pusan National University Dental Hospital between 2010 and 2024. Radiographs and clinical photographs were analyzed for grade C teeth with exposed dentin using Takei’s method, and the pulp chamber height ratio (PCHR) and width ratio (PCWR) were measured using Jeon’s method. Intraobserver reliability was high (intraclass correlation coefficient>0.6), with no significant sex-based differences in PCHR and PCWR. Both ratios negatively correlated with age, with PCWR showing a stronger correlation, particularly in females (r=–0.606). This study derived an improved age estimation formula with R² values ranging from 0.540 to 0.546 when both PCHR and PCWR were combined. Despite the limitations of this study, such as its small sample size and reliance on panoramic radiographs, the findings suggest that combining tooth wear and pulp cavity size offers a more robust tool for age estimation in clinical and forensic settings.

This review describes a psychological support service designed to address post-traumatic stress disorder in workers impacted by workplace injuries, assisting in their recovery and facilitating their return to work. It explores the rationale and context behind establishing trauma counseling centers for these individuals, along with the status, roles, future directions, and recommendations for these centers. The review details the operational framework and functions of the workplace injury trauma management program, the scope of the impacts of such injury, the groups targeted for crisis intervention, and the psychological interventions tailored to each stage of recovery. Initiated as a pilot project in 2018, trauma counseling centers for workers have gradually become more common, with 23 centers in operation across Korea as of 2024.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.