OBJECTIVES: Magnetic resonance imaging (MRI) was used to study the efficacy of modified anterior splint (MAS) combined with anterior repositioning splint (ARS) in maintaining the normal disk-condyle relationship. METHODS: We obtained clinical and imaging data of 10 patients with acute anterior disk displacement without reduction (ADDwoR) of the temporomandibular joint undergoing successful mandibular manipulation in the Affiliated Stomatological Hospital, Nanchang University from January to June 2024. The MAS and ARS were used for subsequent treatment. Maximum active mouth opening (MMO) and visual analogue score (VAS) were recorded before treatment and 2 weeks, 1 month, and 3 months after treatment. The changes in the disk-condyle relationship, disk-condyle angle, joint effusion, and double contour sign before and after treatment were analyzed through MRI. RESULTS: Three months after treatment, the MMO increased from 28.90 mm to 46.85 mm, VAS decreased from 4.68 to 0.61, and the disk-condyle angle decreased from 58.84° to 25.99°. MRI analysis found that 6 patients showed normal disk-condyle relationship, 2 patients exhibited displacement with reduction, and 2 patients exhibited ADDwoR. The disk-condyle angle was 58.84° before treatment and 25.99° after treatment. CONCLUSIONS The MAS combined with ARS could further stabilize the coordinated disk-condyle relationship and reduce the recurrence rate.
Humans ; Male ; Magnetic Resonance Imaging ; Female ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Splints ; Middle Aged ; Mandible ; Temporomandibular Joint Disc ; Occlusal Splints ; Temporomandibular Joint ; Young Adult ; Joint Dislocations/therapy*

OBJECTIVE: To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro. METHODS: A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05. RESULTS: With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm. CONCLUSION A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.
Computer-Aided Design ; Cone-Beam Computed Tomography ; Dental Articulators ; Humans ; Jaw Relation Record ; Occlusal Splints ; Software ; Splints

Patients with masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) experience limited mouth opening due to restricted muscle extension. Hyperplastic aponeurosis and tendons lead to the restriction of muscle extension. The criteria for the diagnosis of MMTAH are limited mouth opening that progresses very slowly from adolescence, intraoral palpation reveals a hard cord-like structure along the overhang of the anterior border of the masseter muscle on maximum mouth opening, and a square mandible. Conservative treatment, including pharmacotherapy, occlusal splint and physical therapy are ineffective. The standard therapy is surgical treatment, such as anterior partial aponeurectomy of the masseter muscle and coronoidectomy. The long-term results are very satisfying.
Adolescent ; Diagnosis ; Drug Therapy ; Humans ; Hyperplasia ; Mandible ; Masseter Muscle ; Masticatory Muscles ; Mouth ; Occlusal Splints ; Palpation ; Tendons

OBJECTIVE: To establish a complete workflow of digital design and manufacturing occlusal splint for sleep bruxism, which can be preliminarily applied in clinical use, thus observe the clinical efficacy. METHODS: Twenty-four patients with sleep bruxism were recruited in the study and randomly divided into two groups by using random number tables. Digital-occlusal-splint (experimental group) treatment plan and traditional-occlusal-splint (control-group) treatment plan were carried out for each group, respectively. For experimental group, digital models of patients' both dental arches and the occlusion relationship after elevation were captured using an intraoral scanner. The occlusal splint was carried out by computer aided design/computer aided manufacturing (CAD/CAM), including splint designing and milling. For control group, the traditional soft occlusal splint was fabricated by vacuum laminator. The two kinds of occlusal splints were tried in the patients from each group, and the occlusal contacts were tested respectively by T-scan analysis system, which recorded the changes of occlusal indicators in the two groups. The retention, appearance and occlusal comfort degree were evaluated by the two groups of patients. Mann-Whitney test was performed with IBM SPSS 20.0 software, and bilateral test was performed. P<0.05 was considered to be statistically significant. RESULTS: The complete workflow of digital design and manufacturing occlusal splint was successfully established. During the clinical use, there was no statistical difference in the retention evaluation of two kinds of occlusal splints between the two groups of patients (Z=-0.538, P=0.590). The appearance score (Z=2.038, P=0.042) and the occlusal comfort score (Z=-2.579, P=0.010) of the experimental group were higher than those of the control group, with statistically significant differences. The T-scan analysis results showed that only the second molar on both sides of the traditional occlusal splint had occlusal contact in intercupsal position, while the digital occlusal splint had stable and bilaterally balanced contact between the maxillary and mandibular teeth. Furthermore, the occlusal force was uniformly distributed in the experimental group. CONCLUSION The complete workflow of digital occlusal splint improves the occlusal design, greatly simplifies and optimizes the traditional process of making occlusal splint. This new method is resource-saving and environmental-friendly, and it is able to serve patients more conveniently and efficiently.
Dental Arch ; Dental Occlusion ; Humans ; Occlusal Splints ; Sleep Bruxism ; Workflow

Occlusion may change spontaneously but dental treatment or trauma in the patients with temporomandibular disorders (TMDs) may also alter occlusion. This report presents three cases displaying occlusal changes. Review of literature emphasizes the significance of TMD treatment. Conservative treatment modalities such as counseling, medication, physical therapy and splint therapy may be selected as initial treatment options. Irreversible or invasive treatment, such as orthodontic, prosthodontic, and occlusal adjustment should not be attempted early. In case there is no response to conservative treatment, joint injection, muscle injection, arthrocentesis or arthroscopic surgery might be performed.
Arthrocentesis ; Arthroscopy ; Counseling ; Humans ; Joints ; Occlusal Adjustment ; Splints ; Temporomandibular Joint Disorders ; Temporomandibular Joint

This article describes cases of applying non-surgical treatment including scaling and root planing, occlusal adjustment and tooth splinting of periodontally compromised lower anterior incisors Clinical and radiographic evaluations were performed over a 1–3-year period. All clinical parameters and radiographic bone levels improved in both cases. Dramatic regeneration of alveolar bone and lamina dura were observed on radiographic images, and no specific complications occurred during the follow-up period. Within the limitations of this study, these cases demonstrated the possibility of tooth rescue through non-surgical treatment and splinting of periodontally compromised teeth typically considered for extraction.
Bone Regeneration ; Dental Occlusion, Traumatic ; Follow-Up Studies ; Incisor ; Occlusal Adjustment ; Periodontal Splints ; Regeneration ; Root Planing ; Splints ; Tooth

Severe dental attrition causes pathological changes of the tooth, collapsed occlusion, and functional and aesthetic complications and can also result in a decrease in occlusal vertical dimension. Before increasing the vertical dimension with full-mouth rehabilitation, it is important to determine the amount of vertical dimension through accurate diagnosis. In this case, a 77 year old elderly male patient on anticoagulant medication with generalized attrition and fracture of teeth was treated with full-mouth rehabilitation in order to recover vertical dimension and aesthetics. Accurate clinical and radiographic examination, diagnostic, wax-up, and occlusal vertical dimension evaluation were step by step performed considering pre-medical history and old age. Patient adaptability was evaluated using an occlusal splint and interim restoration. After 3 months of stabilization with interim restoration, definitive prostheses were fabricated. Satisfactory functional and esthetic outcomes are observed after 6 months of follow up.
Aged ; Dentition ; Diagnosis ; Esthetics ; Follow-Up Studies ; Humans ; Male ; Mouth Rehabilitation ; Mouth ; Occlusal Splints ; Prostheses and Implants ; Rehabilitation ; Tooth ; Tooth Attrition ; Vertical Dimension

OBJECTIVES: The aim of this study was to develop a decision support model for the prediction of occlusal force from the size and color of articulating paper markings in bruxism patients. METHODS: We used the information from the datasets of 30 bruxism patients in which digital measurements of the size and color of articulating paper markings (12-µm Hanel; Coltene/Whaledent GmbH, Langenau, Germany) on canine protected hard stabilization splints were measured in pixels (P) and in red (R), green (G), and blue (B) values using Adobe Photoshop software (Adobe Systems, San Jose, CA, USA). The occlusal force (F) was measured using T-Scan III (Tekscan Inc., South Boston, MA, USA). The multiple regression equation was applied to predict F from the P and RGB. Model evaluation was performed using the datasets from 10 new patients. The patient's occlusal force measured by T-Scan III was used as a ‘gold standard’ to compare with the occlusal force predicted by the multiple regression model. RESULTS: The results demonstrate that the correlation between the occlusal force and the pixels and RGB of the articulating paper markings was positive (F = 1.62×P + 0.07×R –0.08×G + 0.08×B + 4.74; R 2 = 0.34). There was a high degree of agreement between the occlusal force of the patient measured using T-Scan III and the occlusal force predicted by the model (kappa value = 0.82). CONCLUSIONS: The results obtained demonstrate that the multiple regression model can predict the occlusal force using the digital values for the size and color of the articulating paper markings in bruxism patients.
Bite Force* ; Bruxism* ; Dataset ; Decision Making ; Decision Support Systems, Clinical* ; Decision Support Techniques ; Humans ; Logistic Models ; Occlusal Splints ; Splints

PURPOSE: This article describes a case of the successful non-surgical management of a periodontally compromised maxillary premolar. METHODS: A combination therapy, including root planing, occlusal adjustment, and tooth splinting, was applied. Clinical and radiographic examinations were performed during the 16-month follow-up period. RESULTS: All periodontal parameters were improved. There were dramatic decreases (3–6 mm) in the probing pocket depth, tooth mobility, and marginal bone loss. Interestingly, gradual resolution of the periapical radiolucency and alveolar bone regeneration were observed in the radiographs, and the periodontal condition was maintained during the follow-up period. CONCLUSIONS: Within the limits of this study, these results demonstrate the importance of natural tooth preservation through proper periodontal treatment and occlusal adjustment of the periodontally compromised tooth, which is typically targeted for tooth extraction and dental implantation.
Bicuspid ; Bone Regeneration ; Dental Implantation ; Dental Implants ; Dental Occlusion, Traumatic ; Follow-Up Studies ; Occlusal Adjustment ; Periodontitis ; Root Planing ; Splints ; Tooth Extraction ; Tooth Mobility ; Tooth*

Here, the author presents a case of bruxism-induced otalgia in a 29-year-old female patient. The pain was sharp and penetrating in character. It was usually worse in the morning and frequently radiated to the right temporal area. She had received unsuccessful medical treatments for migraine headache. The otoendoscopic examination revealed a normal tympanic membrane. A thorough inspection of her teeth revealed excessive wear on the incisal edges, and the cause of her otalgia was identified as bruxism-related temporomandibular joint disorder. After the use of an occlusal splint and repeated botulinum toxin injections in the masseter and anterior temporalis muscles, along with good sleep hygiene, she experienced significant relief of pain and symptoms. The author suggests that multidisciplinary cooperation between ENT clinicians and dentists is necessary for the quick and accurate diagnosis and treatment of bruxism and the consequential referred otalgia.
Adult ; Botulinum Toxins ; Bruxism ; Dentists ; Diagnosis ; Earache* ; Female ; Humans ; Hygiene ; Migraine Disorders ; Muscles ; Occlusal Splints ; Pain, Referred ; Temporomandibular Joint Disorders ; Tooth ; Tooth Wear ; Tympanic Membrane