Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

ObjectiveTo explore the current situation of adverse medical behaviors in oncology patients and propose corresponding countermeasures to reduce the incidence of adverse medical behaviors in oncology patients， standardize their diagnosis and treatment order， and ensure the quality and safety of medical care. MethodsUsing the purposive sampling method， 16 oncology patients and caregivers from 3 communities in a city were selected for semi-structured and in-depth qualitative interviews from October to December 2023. Nvivo 12.0 software was used for data transcription and thematic analysis. ResultsThree themes were extracted. First， the adverse medical behaviors in oncology patients included overtreatment， non-standardized medication， and inaccurate recommendations of exorbitant examination items. Second， the influencing factors of adverse medical behaviors in oncology patients included limitations of the medical system and policy issues， difficulty in defending the rights of patients in a vulnerable position， as well as inadequacy of related ethical supervision and laws and regulations. Third， the countermeasures for adverse medical behaviours in cancer patients mainly encompassed improving the construction of medical systems and policies， optimizing the allocation of medical resources， enhancing the medical ethical literacy of medical personnel， standardizing the professional behaviour of medical personnel， strengthening medical ethical education for patients and enhancing their awareness of the protection of rights and interests， as well as strengthening ethical supervision and evaluation. ConclusionThe adverse medical behaviors in oncology patients are affected by tripartite factors， including medical staff， patients， and the system. The government， medical institutions， medical personnel， and patients should all adopt targeted countermeasures to deal with adverse medical behaviours， thus regulating diagnosis and treatment orders and ensuring the quality and safety of medical care.

Parkinson’s disease (PD) is a neurodegenerative disorder characterized by the progressive loss of dopamine (DA) neurons in the substantia nigra pars compacta (SNpc), primarily manifesting as motor dysfunctions such as resting tremor, muscle rigidity, and bradykinesia. According to the classical model of basal ganglia motor control, approximately half of the medium spiny neurons (MSNs) in the striatum are D1-MSNs, which constitute the direct pathway. These neurons express D₁-dopamine receptor (D₁R) and substance P, and they mainly participate in the selection, initiation, and execution of movements. The other half are D2-MSNs, which constitute the indirect pathway. These neurons express D₂-dopamine receptor (D₂R) and adenosine 2A receptors and are involved in inhibiting unnecessary movements or terminating ongoing movements, thereby adjusting movement sequences to perform more precise motor behaviors. The direct pathway in the striatum modulates the activity of motor cortex neurons by exciting D1-MSNs through neurotransmitters such as glutamate (Glu), allowing the motor cortex to send signals more freely to the motor system, thus facilitating the generation and execution of specific motor behaviors. Studies using D1-Cre and D2-Cre mice with neurons labeled for D₁R and D₂R have shown that both types of neurons are involved in the execution of movements, with D1-MSNs participating in movement initiation and D2-MSNs in inhibiting actions unrelated to the target movement. These findings suggest that the structural and functional plasticity of D1-MSNs and D2-MSNs in the basal ganglia circuitry enables motor learning and behavioral regulation. Additionally, when SNpc DA neurons begin to degenerate, D1-MSNs are initially affected but do not immediately cause motor impairments. In contrast, when D2-MSNs undergo pathological changes, they are first activated by upstream projecting neurons, leading to the inhibition of most motor behaviors and resulting in motor dysfunction. Therefore, it is hypothesized that motor impairments such as bradykinesia and initiation difficulties are more closely related to the functional activity of D2-MSNs. The extracellular signal-regulated kinase (Erk)/mitogen-activated protein kinase (MAPK) signaling pathway has been identified as a critical modulator in the pathophysiology of PD. Recent findings indicate that Erk/MAPK signaling pathway can mediate DA and Glu signaling in the central nervous system, maintaining normal functional activity of striatal MSNs and influencing the transmission of motor control signals. Within this complex regulatory network, the Erk/MAPK signaling pathway plays a key role in transmitting motor information to downstream neurons, regulating normal movements, avoiding unnecessary movements, and finely tuning motor behaviors. Our laboratory’s previous research found that 4 weeks of aerobic exercise intervention improved motor dysfunction in PD mice by inhibiting the Erk1/2 signaling upstream of striatal MSNs, primarily involving the Erk1/2 signaling in D2-MSNs rather than D1-MSNs. This review summarizes the neurobiological mechanisms of Erk/MAPK signaling pathway in D2-MSNs for the prevention and treatment of motor dysfunction in PD. By exploring the role of this signaling pathway in regulating motor abnormalities and preventing motor dysfunction in the central nervous system of PD, this review provides new theoretical perspectives for related mechanistic research and therapeutic strategies.

To introduce the general thinking, guidelines, work objectives and elaboration process of the general technical requirements adopted by volume Ⅳ of the Chinese Pharmacopoeia 2025 Edition, and to summarize and figure out the main characteristics on dosage forms, physico-chemical testing, microbial and biological testing, reference standards and guidelines The newly revised general chapters of pharmacopoeia give full play to the normative and guiding role of the Chinese Pharmacopoeia standard, track the frontier dynamics of international drug regulatory science and the elaboration of monographs, expand the application of state-of-the-art technologies, and steadily promote the harmonization and unification with the ICH guidelines； further enhance the overall capacity of TCM quality control, actively implement the 3 R principles on animal experiments, and practice the concept of environmental-friendly； replace and/or reduce the use of toxic and hazardous reagents, strengthen the requirements of drug safety control This paper aims to provide a full-view perspective for the comprehensive, correct understanding and accurate implementation of general technical requirements included in the Chinese Pharmacopoeia 2025 Edition.

Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.

ObjectiveTo construct a family-centered care model for children with tuberculosis based on the double ABC-X model, and to evaluate its clinical effects. MethodsFrom December 2022 to October 2023, 64 newly admitted children with tuberculosis who met the criteria and their caregivers were recruited from the tuberculosis department of Shanghai Public Health Clinical Center were randomly divided into an experimental group (32 cases) and a control group (32 cases).The control group was given a conventional health care, while the experimental group was given a family-centered health care intervention based on the double ABC-X model, in which a multidisciplinary care team provided personalized information and emotional support for the caregivers and their children. Medication adherence of the children, caregiver’s teading burden, and disease management competence were compared between the 2 groups. ResultsA total of 29 cases in the experimental group and 27 cases in the control group completed the intervention. At 12 weeks of intervention, the medication adherence score (7.72±0.45 vs 7.41±0.50, P<0.05) and disease management competence score (36.97±7.85 vs 31.56±7.30, P<0.05) were higher in the experimental group than that in the control group while the caregiving burden score (31.79±13.40 vs 40.04±9.01, P<0.05) and difficulty of disease management score (30.41±12.41 vs 38.56±9.48, P<0.05) were lower than that in the control group. At 24 weeks of intervention, the medication adherence score (7.34±0.97 vs 6.70±1.14, P<0.05) and disease management competence score (42.07±6.93 vs 35.63±7.32, P<0.05) were higher in the experimental group than that in the control group as well, but the caregiving burden score (31.62±11.72 vs 39.63±10.17, P<0.05) and difficulty of disease management score (30.59±10.87 vs 37.81±9.32, P<0.05) were lower than that in the control group. ConclusionFamily-centered care based on the double ABC-X model can effectively promote medication adherence among children with tuberculosis, reduce caregivers’ care burden and disease management difficulties, and improve caregiver’s disease management competence.

Objective To investigate and analyze the resources and application frequency of radiological diagnosis and treatment in Jinan City in 2023 and provide a basis for the rational application of radiological diagnosis and treatment resources and strengthening radiological health protection management. Methods The health administrative department issued a work plan. A general survey was conducted on radiological diagnosis and treatment institutions (excluding dental clinics) in Jinan City using a questionnaire. The survey covered the basic information of the radiological diagnosis and treatment institutions, the distribution of the radiological diagnosis and treatment equipment, the number of radiological workers, and the frequency of radiological diagnosis and treatment. Results There were 301 radiological diagnosis and treatment institutions in Jinan City, with 1603 sets of radiological diagnosis and treatment equipment and 5789 radiological workers. These institutions included 41 (13.62%) tertiary hospitals, 57 (18.94%) secondary hospitals, 110 (36.54%) primary hospitals, and 93 (30.90%) ungraded hospitals. Tertiary hospitals had the highest proportions of radiological diagnosis and treatment equipment and workers, accounting for 49.53% and 69.10% of the total, respectively. The frequencies of radiological diagnosis and treatment were 868.86 X-ray diagnostic imaging examinations per 1000 population, 5.07 radiotherapies per 1000 population, 14.19 interventional diagnostic and therapeutic procedures per 1000 population, 7.36 nuclear medical diagnostic procedures per 1000 population, and 0.56 nuclear medical therapeutic procedures per 1000 population. The frequency of CT diagnosis was the highest, reaching 407.76 procedures per 1000 population. Conclusion The radiological diagnosis and treatment resources and activities in Jinan City were mainly concentrated in tertiary hospitals, with unbalanced distribution among hospitals of different grades. It is necessary to apply various medical radiations correctly and reasonably and strengthen radiation protection to reduce the frequency of radiation and the collective effective dose.

BACKGROUND:The use of 3D-printed patient-specific instruments in opening wedge high tibial osteotomy has advantages such as shorter operative time,fewer fluoroscopic exposures,and higher correction accuracy.However,previous studies have reported issues such as significant damage to surrounding soft tissues and improper fixation of the plates. OBJECTIVE:To investigate the clinical efficacy of using 3D-printed patient-specific instruments combined with customized locking plate in opening wedge high tibial osteotomy for the treatment of knee osteoarthritis. METHODS:A total of 20 patients diagnosed with knee osteoarthritis were divided into the 3D group(n=10)and the conventional group(n=10)according to surgical methods.The 3D group underwent opening wedge high tibial osteotomy using 3D-printed patient-specific instruments combined with customized locking plate,while the conventional group underwent opening wedge high tibial osteotomy using conventional methods.The operative time,fluoroscopic exposures,incision length,pre-and postoperative hip-knee-ankle angle,medial proximal tibial angle,posterior tibial slope,the difference between the planned and actual correction angle,preoperative and 1,3,6 months postoperative knee range of motion and Lysholm score,and incidence of complications were analyzed and compared between the two groups. RESULTS AND CONCLUSION:(1)The operative time and fluoroscopic exposures were significantly shorter in the 3D group compared to the conventional group,with a statistically significant difference(P<0.001).(2)Both groups showed a significant improvement in postoperative hip-knee-ankle angle and medial proximal tibial angle compared to preoperative values,with a statistically significant difference(P<0.001),while there was no significant change in posterior tibial slope.In the 3D group,the postoperative hip-knee-ankle angle,medial proximal tibial angle,and posterior tibial slope differed from their respective preoperative planned values by(-0.22±0.72)°,(-0.20±0.73)°,and(0.23±0.37)°,but the differences were not statistically significant.The difference between the planned and actual correction angle of 3D group was significantly smaller than that of conventional group(P<0.05).(3)Both groups showed a gradual increase in knee range of motion and Lysholm scores after surgery(P<0.001).Compared to the conventional group,the 3D group had superior knee range of motion at 1 and 3 months postoperatively,as well as a higher Lysholm score at 1 month postoperatively,with statistically significant differences(P<0.05).There were no statistically significant differences in Lysholm score at 3 months and knee range of motion and Lysholm score at 6 months between the two groups(P>0.05).(4)Complications occurred in neither groups.(5)The above results indicate that both 3D-printed patient-specific instruments combined with customized locking plate and conventional methods have good clinical efficacy.However,the former has a shorter operative time,fewer fluoroscopic exposures,and faster postoperative recovery of knee joint function.Additionally,3D-printed patient-specific instruments can achieve preoperative planning accurately.

Objective: To investigate the association between habitual reading/writing postures and the co-occurrence of common health conditions (overweight/obesity, visual impairment, hypertension, and scoliosis) and comorbidities among children and adolescents, in order to provide data support for the joint prevention of common diseases and comorbidities among children and adolescents. Methods: From September 2021 to June 2022, a multi-stage cluster random sampling method was used to select a total of 4 577 children and adolescents from 16 primary and secondary schools in Ningxia: Jinfeng District of Yinchuan City, Shapotou District of Zhongwei City, Yanchi County of Wuzhong City, and Pingluo County of Shizuishan City. A weighted complex sampling design was used to investigate the association of habitual reading and writing postures with common comorbidities in children and adolescents. Results: The prevalence rates of common diseases among children and adolescents in Ningxia were as follows: overweight/obesity was 22.87%, visual impairment was 62.52%, scoliosis was 2.30%, and hypertension was 1.30%. The prevalence of multimorbidity (co-occurrence of ≥2 conditions) among Ningxia children and adolescents was 15.95%. Multivariate unconditional Logistic regression analysis showed that frequent/always collapsing waist and sitting forward with head lowered increased the risk of common comorbidities in children and adolescents ( OR =1.90, P <0.05). Compared with the corresponding reference group, male children and adolescents aged 9 to 12 years and boys had relatively lower risks of overweight/obesity ( OR =0.71, 0.70); the risk of poor vision among children and adolescents aged 9 to 12 years, male, and urban was relatively low ( OR =0.59, 0.60, 0.73)( P < 0.05 ). Children and adolescents who often/always sat leaning to the left or right were at higher risk of poor vision ( OR =1.78); urban children and adolescents had a higher risk of developing scoliosis ( OR =3.71); children and adolescents aged 9 to 12 had a relatively low risk of developing hypertension ( OR =0.09), and children and adolescents who often/always bent their backs and sat forward on their knees had a higher risk of hypertension ( OR =5.03)( P <0.05). Conclusions Ningxia has a high incidence of common diseases and multiple diseases among children and adolescents, frequent or always collapsing waist and sitting forward with head lowered is associated with common comorbidities in children and adolescents in Ningxia. Proper postural measures for reading and writing should be carried out as soon as possible to encourage children and adolescents to develop good reading and writing habits for effectively preventing and controlling the occurrence of common diseases.

T7 RNA polymerase (T7 RNAP) is one of the simplest known RNA polymerases. Its unique structural features make it a critical model for studying the mechanisms of RNA synthesis. This review systematically examines the static crystal structure of T7 RNAP, beginning with an in-depth examination of its characteristic “thumb”, “palm”, and “finger” domains, which form the classic “right-hand-like” architecture. By detailing these structural elements, this review establishes a foundation for understanding the overall organization of T7 RNAP. This review systematically maps the functional roles of secondary structural elements and their subdomains in transcriptional catalysis, progressively elucidating the fundamental relationships between structure and function. Further, the intrinsic flexibility of T7 RNAP and its applications in research are also discussed. Additionally, the review presents the structural diagrams of the enzyme at different stages of the transcription process, and through these diagrams, it provides a detailed description of the complete transcription process of T7 RNAP. By integrating structural dynamics and kinetics analyses, the review constructs a comprehensive framework that bridges static structure to dynamic processes. Despite its advantages, T7 RNAP has a notable limitation: it generates double-stranded RNA (dsRNA) as a byproduct. The presence of dsRNA not only compromises the purity of mRNA products but also elicits nonspecific immune responses, which pose significant challenges for biotechnological and therapeutic applications. The review provides a detailed exploration of the mechanisms underlying dsRNA formation during T7 RNAP catalysis, reviews current strategies to mitigate this issue, and highlights recent progress in the field. A key focus is the semi-rational design of T7 RNAP mutants engineered to minimize dsRNA generation and enhance catalytic performance. Beyond its role in transcription, T7 RNAP exhibits rapid development and extensive application in fields, including gene editing, biosensing, and mRNA vaccines. This review systematically examines the structure-function relationships of T7 RNAP, elucidates the mechanisms of dsRNA formation, and discusses engineering strategies to optimize its performance. It further explores the engineering optimization and functional expansion of T7 RNAP. Furthermore, this review also addresses the pressing issues that currently need resolution, discusses the major challenges in the practical application of T7 RNAP, and provides an outlook on potential future research directions. In summary, this review provides a comprehensive analysis of T7 RNAP, ranging from its structural architecture to cutting-edge applications. We systematically examine: (1) the characteristic right-hand domains (thumb, palm, fingers) that define its minimalistic structure; (2) the structure-function relationships underlying transcriptional catalysis; and (3) the dynamic transitions during the complete transcription cycle. While highlighting T7 RNAP’s versatility in gene editing, biosensing, and mRNA vaccine production, we critically address its major limitation—dsRNA byproduct formation—and evaluate engineering solutions including semi-rationally designed mutants. By synthesizing current knowledge and identifying key challenges, this work aims to provide novel insights for the development and application of T7 RNAP and to foster further thought and progress in related fields.