Objective: This study aimed to develop a configurable clean room paradigm with low air pressure for assisted reproductive technology (ART) clinics and demonstrate the concept’s efficacy using in vitro fertilization (IVF) treatment. Methods: A high-standard clean room system with positive pressure (13 Pa) was built using accessible materials and equipment for ART laboratories. Methods for controlling and evaluating the clean room’s characteristics were developed and implemented for quality assessment and calibration to maximize efficiency. The feasibility of the flexible clean room concept was assessed by analyzing the key performance indicators of embryo culture and IVF treatment. Results: After 3 weeks of testing, the concentration of particles ≥0.5 μm was 6.04 times lower than the International Organization for Standardization (ISO) class 5 standard (3,520 particles/m3) in the IVF laboratory. Air pressure, noise, temperature, and humidity were controlled stably and appropriately. Five days after installation and handover, the volatile organic compound concentration dropped to 0.00 ppm. With blastocysts and a respectable blastocyst rate, embryonic culture with female patients younger than 40 matched the criteria (63.5% and 38.9%, respectively). After vitrified blastocysts were transferred, the pregnancy and implantation rates were 58.5% and 36.2%, respectively, demonstrating a high degree of treatment success. Conclusion Our customizable, high-quality, low-air-pressure clean room model can be implemented to achieve positive outcomes for infertility treatment.

Objective: This study aimed to develop a configurable clean room paradigm with low air pressure for assisted reproductive technology (ART) clinics and demonstrate the concept’s efficacy using in vitro fertilization (IVF) treatment. Methods: A high-standard clean room system with positive pressure (13 Pa) was built using accessible materials and equipment for ART laboratories. Methods for controlling and evaluating the clean room’s characteristics were developed and implemented for quality assessment and calibration to maximize efficiency. The feasibility of the flexible clean room concept was assessed by analyzing the key performance indicators of embryo culture and IVF treatment. Results: After 3 weeks of testing, the concentration of particles ≥0.5 μm was 6.04 times lower than the International Organization for Standardization (ISO) class 5 standard (3,520 particles/m3) in the IVF laboratory. Air pressure, noise, temperature, and humidity were controlled stably and appropriately. Five days after installation and handover, the volatile organic compound concentration dropped to 0.00 ppm. With blastocysts and a respectable blastocyst rate, embryonic culture with female patients younger than 40 matched the criteria (63.5% and 38.9%, respectively). After vitrified blastocysts were transferred, the pregnancy and implantation rates were 58.5% and 36.2%, respectively, demonstrating a high degree of treatment success. Conclusion Our customizable, high-quality, low-air-pressure clean room model can be implemented to achieve positive outcomes for infertility treatment.

Objective: This study aimed to develop a configurable clean room paradigm with low air pressure for assisted reproductive technology (ART) clinics and demonstrate the concept’s efficacy using in vitro fertilization (IVF) treatment. Methods: A high-standard clean room system with positive pressure (13 Pa) was built using accessible materials and equipment for ART laboratories. Methods for controlling and evaluating the clean room’s characteristics were developed and implemented for quality assessment and calibration to maximize efficiency. The feasibility of the flexible clean room concept was assessed by analyzing the key performance indicators of embryo culture and IVF treatment. Results: After 3 weeks of testing, the concentration of particles ≥0.5 μm was 6.04 times lower than the International Organization for Standardization (ISO) class 5 standard (3,520 particles/m3) in the IVF laboratory. Air pressure, noise, temperature, and humidity were controlled stably and appropriately. Five days after installation and handover, the volatile organic compound concentration dropped to 0.00 ppm. With blastocysts and a respectable blastocyst rate, embryonic culture with female patients younger than 40 matched the criteria (63.5% and 38.9%, respectively). After vitrified blastocysts were transferred, the pregnancy and implantation rates were 58.5% and 36.2%, respectively, demonstrating a high degree of treatment success. Conclusion Our customizable, high-quality, low-air-pressure clean room model can be implemented to achieve positive outcomes for infertility treatment.

Objective: To investigate the cause of a foodborne outbreak that occurred in Dong Nai province, Viet Nam, in 2024, and implement control measures. Methods: An initial investigation was conducted to confirm the outbreak, which was followed by epidemiological and environmental investigations to find the plausible causative food item. Clinical specimens and food samples were tested to identify the pathogen. Results: A total of 547 symptomatic cases were recorded, of whom two were in severe condition requiring extracorporeal membrane oxygenation and ventilation, one of whom died. Among 99 interviewed cases, the mean incubation time was 9 hours (range 2–24 hours), with the main symptoms being fever, abdominal pain, diarrhoea and vomiting. All patients had eaten banh mi from a local bakery. Salmonella spp. were identified in food samples and clinical specimens. The bakery halted production, and the outbreak ended after 1 week. Discussion: All the patients were exposed to only one food in common, which facilitated the investigation process. This outbreak is a reminder to small retailers and take-away shops of the importance of food safety management in preventing similar future outbreaks. All food handlers must comply with food hygiene principles, especially in hot temperatures, which boosts bacterial growth.

Objectives: The objective of this study was to characterize mental health issues among Vietnamese healthcare workers (HCWs) and to identify related factors. Methods: A cross-sectional study was conducted with 990 HCWs in 2021. Their mental health status was measured using the Depression, Anxiety, and Stress Scale. Results: In total, 49.9%, 52.3%, and 29.8% of respondents were found to have depression, anxiety, and stress, respectively. The multivariable linear regression model revealed that factors associated with increased anxiety scores included depression scores (β, 0.45; 95% confidence interval [CI], 0.39 to 0.51) and stress scores (β, 0.46; 95% CI, 0.41 to 0.52). Factors associated with increased depression scores included being frontline HCWs (β, 0.57; 95% CI, 0.10 to 1.10), stress scores (β, 0.50; 95% CI, 0.45 to 0.56), and anxiety scores (β, 0.41; 95% CI, 0.36 to 0.47), while working experience was associated with reduced depression scores (β, -0.08; 95% CI, -0.16 to -0.01). Factors associated with increased stress scores included working experience (β, 0.08; 95% CI, 0.00 to 0.16), personal protective equipment interference with daily activities (β, 0.55; 95% CI, 0.07 to 1.00), depression scores (β, 0.54; 95% CI, 0.48 to 0.59), and anxiety scores (β, 0.45; 95% CI, 0.39 to 0.50), while age was associated with reduced stress scores (β, -0.12; 95% CI, -0.20 to -0.05). Conclusions Specific interventions are necessary to enhance and promote the mental health of HCWs so they can successfully cope with the circumstances of the pandemic.

Background: Melaleuca essential oil has many good effects, bringing economic efficiency; however, low extraction efficiency is a problem that needs to be overcome. This study aims to enhance the efficiency of extracting Melaleuca essential oil by employing deep eutectic solvents (DESs). Materials and methods: Branches and leaves of Melaleuca cajuputi Powell were pretreated by DESs. Carry out the distillation of essential oils by steam distillation. Determination of the chemical composition of essential oils by chromatography-mass spectrometry (GC-MS). Results: The combination of choline chloride and oxalic acid to create DESs solvent system helps the extraction efficiency of Melaleuca essential oil increase by 160%. In addition, the total content of 1,8-cineol and isocineol in the essential oil extracted with DESs solvent was 34.019%, higher than that of the essential oil extracted with distilled water at 30.749%. Conclusions: The positive results show the potential of using DESs solvents to improve the yield and quality of Melaleuca essential oil

Background: Hypertension is one of the dangerous chronic diseases. In the treatment of hypertension, controlling blood pressure to achieve treatment target is paramount to prevent dangerous complications and death. The study was conducted to identify the percentage of hypertensive patients who do not achieve treatment target among outpatients at the internal medicine clinic, Hue University of Medicine and Pharmacy Hospital, and explore some related factors. Methods: A cross-sectional study was conducted among 403 hypertensive patients treated as outpatients at the internal medicine clinic. A multivariate logistic regression model was used to identify the related factors. Results: 46.4% of hypertensive patients did not reach the treatment target. Factors related to uncontrolled hypertension were male, non-religion, comorbidities, no reduction in salt intake, the use of coffee/tea, and non-compliance with medication (p < 0.05). Conclusions: The rate of patients with uncontrolled hypertension was still high. The health sector should consider establishing an outpatient management team; strengthening communication activities and advice on diet and drug use in parallel with medical examination and treatment.

Objective: This study aimed to compare the efficacy of physiological intracytoplasmic sperm injection (PICSI) and intracytoplasmic sperm injection (ICSI) in terms of the fertilization rate and embryo quality using sibling oocyte cycles. Methods: This prospective, cross-sectional study collected data from 76 couples who underwent their first cycle at the Hue Center for Reproductive Endocrinology and Infertility, Vietnam, between May 2019 and November 2021. The inclusion criteria were cycles with at least eight oocytes and a sperm concentration of 5×106/mL. Sperm parameters, sperm DNA fragmentation (SDF), fertilization, and the quality of cleavage-stage embryos on day 2 and blastocysts on day 5 were examined. Results: From 76 ICSI cycles, 1,196 metaphase II (MII) oocytes were retrieved, half of which were randomly allocated to either the PICSI (n=592) or ICSI (n=604) treatment group. The results showed no significant difference between the two groups in terms of fertilization (72.80% vs. 75.33%, p=0.32), day 2 cleavage rate (95.13% vs. 96.04%, p=0.51), blastulation rate (52.68% vs. 57.89%), and high-quality blastocyst rate (26.10% vs. 31.13%, p=0.13). However, in cases where SDF was low, 59 cycles consisting of 913 MII oocytes produced a considerably higher blastulation rate with PICSI than with ICSI (50.49% vs. 35.65%, p=0.00). There were no significant differences between the pregnancy outcomes of the PICSI and ICSI embryo groups following embryo transfer. Conclusion Using variable sperm quality provided no benefit for PICSI versus ICSI in terms of embryo outcomes. When SDF is low, PICSI appears to be able to produce more blastocysts.

As the associations of sperm DNA fragmentation with morphology have not been examined in detail, this study aimed to investigate the relationship between abnormalities of morphological details and DNA integrity in human sperm. Methods: In this cross-sectional study, men from infertile couples were enrolled at Hue Center for Reproductive Endocrinology and Infertility, Vietnam. Conventional semen parameters, including morphological details, were analyzed following the World Health Organization 2010 criteria. Sperm DNA fragmentation was evaluated using a sperm chromatin dispersion assay. The relationships and correlations between semen parameters, sperm morphology, and the type of halosperm and the DNA fragmentation index (DFI) were analyzed. Results: Among 130 men in infertile couples, statistically significant differences were not found in the sperm halo type between the normal and abnormal sperm morphology groups. The percentage of round-head spermatozoa was higher in the DFI >15% group (16.98%±12.50%) than in the DFI ≤15% group (13.13% ±8.82%), higher values for amorphous heads were found in the DFI >15% group, and lower values for tapered heads were observed in the DFI ≤15% group; however, these differences were not statistically significant. Small-halo sperm and the DFI were positively correlated with round-head sperm (r=0.243, p=0.005 and r=0.197, p=0.025, respectively). Conclusion: The rate of general sperm morphological abnormalities in semen analysis was not related to sperm DNA integrity. However, round sperm heads were closely associated with sperm DNA fragmentation.

As part of our continued study on the chemical constituents of Willughbeia edulis stems, a new dimeric lignan named edulignan (1) was isolated from its EtOAc-soluble extract. Based on NMR spectroscopic interpretation, the planar structure of 1 has been suggested to have two 2-substituted 4-chromanone subunits with different stereochemical configurations. In addition, the MS/MS analysis of the products obtained by acidcatalyzed hydrolysis of 1 was supportive of its structure. Unfornatually, the new compound 1 did not show α-glucosidase inhibitory activity with an IC 50 value > 250 μM.