1.The effect of esketamine on postoperative recovery in children after endoscopic adenoidectomy
Kai-Zheng CHEN ; Ya-Ming XIE ; Qi-Neng XUE ; Xia SHEN
Fudan University Journal of Medical Sciences 2024;51(1):76-80
Objective To observe the effect of esketamine on postoperative recovery in children after endoscopic adenoidectomy.Methods Sixty pediatric patients who underwent adenoidectomy with endoscope from Jan 2022 to Jan 2023 in Eye&ENT Hospital,Fudan University were enrolled.The pediatric patients were randomly divided into hydro-morphine group(n=30)and esketamine group(n=30).Anesthesia induction:lidocaine 1.5 mg/kg,propofol 2.5 mg/kg and remifentanil 4 μg/kg were injected intravenously,and then the endotracheal tube was used for airway management.Anesthesia maintenance:remifentanil infusion was at 0.2-0.5 μg·kg-1·min-1 and the end tidal concentration of sevoflurane was at 0.7-1.0 minimum alveolar concentration(MAC).At the end of surgery,either hydromorphone 0.01 mg/kg or esketamine 0.5 mg/kg were administered for postoperative pain control.Time to resume spontaneous breathing was recorded.Other parameters included respiratory rate per minute,duration of stay in the post-anesthesia care unit,hemodynamic profiles.The adverse events including agitation and desaturation were also of note.Results Children in esketamine group resumed spontaneous breathing faster(P=0.048),had faster respiratory rate when recovery of spontaneous breathing(P=0.001)and lower concentration of end tidal CO2(P=0.005).The findings suggested that esketamine did not impair respiratory function.Compared to hydro-morphine group,children in esketamine group had shorter stay in the post-anesthesia care unit with statistical difference(P=0.020).Esketamine had no effect on heart rate and blood pressure,so there were less adverse events.Conclusion Compared with 0.01 mg/kg hydro-morphine,0.5 mg/kg esketamine does not impair respiratory function and it facilitate fast recovery in children undergoing endoscopic adenoidectomy after general anesthesia.
2.Printing Process Quality Control of Bioprinting Medical Devices
Neng XIE ; Qixin CAO ; Jinwu WANG ; Yuanjing XU ; Changru ZHANG ; Ya WANG ; Zitong WANG
Chinese Journal of Medical Instrumentation 2024;48(3):245-250
Objective This study analyzes the risk points in the quality control of bioink and the main processes of bioprinting,clarifies and explores the quality control and supervision model for bioprinting medical devices,and provides theoretical and practical guidance to ensure the safety and effectiveness of bioprinting medical devices.Methods The quality control risk points throughout the bioprinting process were comprehensively analyzed,with a particular focus on bioprinting materials and key processes.The regulatory model and methods for bioprinting medical devices were examined.This research concentrated on critical technologies such as extrusion,laser-assisted,and in situ bioprinting,assessing their potential for clinical applications and regulatory challenges.Results Bioink from different sources should meet regulatory requirements.It is essential to ensure aseptic handling of raw materials and to validate sterilization under"worst-case"conditions.Conclusion As bioprinting technology advances rapidly,corresponding research into materials,processes,and quality risk control should be conducted to ensure the concurrent development of the regulatory system.This will continuously contribute to the orderly progression of the entire industry and human health.
3.Three-dimensional finite element analysis of lumbar disc herniation under different body positions
Ben-Jing YIN ; Yu LU ; Fu-Tao JI ; Rong-Neng QIU ; Yuan-Yang XIE ; Ge CHEN ; Tian-Li XU ; Chao-Yu BAO ; Ju-Bao LI
China Journal of Orthopaedics and Traumatology 2024;37(6):599-604
Objective To campare biomechanical effects of different postural compression techniques on three-dimensional model of lumbar disc herniation(LDH)by finite element analysis.Methods Lumbar CT image of a 48-year-old female patient with LDH(heighted 163 cm,weighted 53 kg)was collected.Mimics 20.0,Geomagic Studio,Solidwords and other software were used to establish three-dimensional finite element model of LDH on L4,5 segments.Compression techniques under horizon-tal position,30° forward bending and 10° backward extension were simulated respectively.After applying the pressure,the ef-fects of compression techniques under different positions on stress,strain and displacement of various tissues of intervertebral disc and nerve root were observed.Results L4,5 segment finite element model was successfully established,and the model was validated.When compression manipulation was performed on the horizontal position,30° flexion and 10° extension,the annular stress were 0.732,5.929,1.286 MPa,the nucleus pulposus stress were 0.190,1.527,0.295 MPa,and the annular strain were 0.097,0.922 and 0.424,the strain sizes of nucleus pulposus were 0.153,1.222 and 0.282,respectively.The overall displace-ment distance of intervertebral disc on Y direction were-3.707,-18.990,-4.171 mm,and displacement distance of nerve root on Y direction were+7.836,+5.341,+3.859 mm,respectively.The relative displacement distances of nerve root and interverte-bral disc on Y direction were 11.543,24.331 and 8.030 mm,respectively.Conclusion Compression manipulation could make herniated intervertebral disc produce contraction and retraction trend,by increasing the distance between herniated interverte-bral disc and nerve root,to reduce symptoms of nerve compression,to achieve purpose of treatment for patients with LDH,in which the compression manipulation is more effective when the forward flexion is 30°.
4.Study on after-effect of electroacupuncture with different time intervals on corticospinal excitability in primary motor cortex.
Meng-Meng XIE ; Zi-Zhen CHEN ; Wei-Li CHENG ; Jian-Peng HUANG ; Neng-Gui XU ; Jian-Hua LIU
Chinese Acupuncture & Moxibustion 2023;43(11):1239-1245
OBJECTIVES:
To compare the effects of electroacupuncture (EA) with different time intervals on corticospinal excitability of the primary motor cortex (M1) and the upper limb motor function in healthy subjects and observe the after-effect rule of acupuncture.
METHODS:
Self-comparison before and after intervention design was adopted. Fifteen healthy subjects were included and all of them received three stages of trial observation, namely EA0 group (received one session of EA), EA6h group (received two sessions of EA within 1 day, with an interval of 6 h) and EA48h group (received two sessions of EA within 3 days, with an interval of 48 h). The washout period among stages was 1 week. In each group, the needles were inserted perpendicularly at Hegu (LI 4) on the left side, 23 mm in depth and at a non-acupoint, 0.5 cm nearby to the left side of Hegu (LI 4), separately. Han's acupoint nerve stimulator (HANS-200A) was attached to these two needles, with continuous wave and the frequency of 2 Hz. The stimulation intensity was exerted higher than the exercise threshold (local muscle twitching was visible, and pain was tolerable by healthy subjects, 1-2 mA ). The needles were retained for 30 min. Using the single pulse mode of transcranial magnetic stimulation (TMS) technique, before the first session of EA (T0) and at the moment (T1), in 2 h (T2) and 24 h (T3) after the end of the last session of EA, on the left first dorsal interosseous muscle, the amplitude, latency (LAT), resting motor threshold (rMT) of motor evoked potentials (MEPs) and the completion time of grooved pegboard test (GPT) were detected. Besides, in the EA6h group, TMS was adopted to detect the excitability of M1 (amplitude, LAT and rMT of MEPs) before the last session of EA (T0*).
RESULTS:
The amplitude of MEPs at T1 and T2 in the EA0 group, at T0* in the EA6h group and at T1, T2 and T3 in the EA48h group was higher when compared with the value at T0 in each group separately (P<0.001). At T1, the amplitude of MEPs in the EA0 group and the EA48h group was higher than that in the EA6h group (P<0.001, P<0.01); at T2, it was higher in the EA0 group when compared with that in the EA6h group (P<0.01); at T3, the amplitude in the EA0 group and the EA6h group was lower than that of the EA48h group (P<0.001). The LAT at T1 was shorter than that at T0 in the three groups (P<0.05), and the changes were not obvious at the rest time points compared with that at T0 (P > 0.05). The GPT completion time of healthy subjects in the EA0 group and the EA48h group at T1, T2 and T3 was reduced in comparison with that at T0 (P<0.001). The completion time at T3 was shorter than that at T0 in the EA6h group (P<0.05); at T2, it was reduced in the EA48h group when compared with that of the EA6h group (P<0.05). There were no significant differences in rMT among the three groups and within each group (P>0.05).
CONCLUSIONS
Under physiological conditions, EA has obvious after-effect on corticospinal excitability and upper limb motor function. The short-term interval protocol (6 h) blocks the after-effect of EA to a certain extent, while the long-term interval protocol (48 h) prolongs the after-effect of EA.
Humans
;
Electroacupuncture
;
Motor Cortex/physiology*
;
Transcranial Magnetic Stimulation/methods*
;
Upper Extremity
;
Exercise
;
Muscle, Skeletal/physiology*
5.Survey on occupational hazards of enterprises in Pingshan district of Shenzhen City
DUAN Jia li LIN Yan fa HE Zhi ming WU Neng jian XIE Wei HUANG Yu quan WANG Qing
China Occupational Medicine 2022;52(04):472-
Abstract: Objective
To analyze the occupational hazards of enterprises in Pingshan district of Shenzhen in 2017.
Methods
Occupational hazards were analyzed in 200 enterprises in Pingshan district of Shenzhen City selected using stratified
Results
random sampling method. A total of 24 industries were involved in the 200 enterprises. The declaration rate of
,
occupational hazards was 91.5% and the exposure rate of occupational hazards among workers was 49.2%. The regular
monitoring rate of occupational hazard factors in workplaces of the enterprises was 79.5%. There were 129 kinds of occupational
, ,
hazard factors of which 19 factors exceeded the national occupational exposure limit accounting for 14.7%. The over standard
, , , , , , , ,
rates of noise silica dust cotton dust methanol toluene and other dust were 28.7% 13.6% 11.8% 5.86% 0.5% and
, ,
0.4% respectively. There were 13 kinds of occupational hazard factors in the workplace of metal products industry all of which
( )
exceeded the occupational exposure limit. The exposure rate 56.7% of occupational hazard factors in workers was the highest.
Conclusion , ,
The main occupational hazard factors were noise dust and chemical factor and the major occupational hazard
industry was metal manufacturing in Pingshan district of Shenzhen City.
6.Value of anti-neutrophil cytoplasmic antibody in assessing the severity of bronchiolitis obliterans in children.
Xiao-Wen CHEN ; De-Hui CHEN ; Shang-Zhi WU ; Na XIE ; Wen-Kuan LIU ; Yu-Neng LIN ; Ya-Wen ZHANG ; Qing-Si ZENG
Chinese Journal of Contemporary Pediatrics 2020;22(9):990-995
OBJECTIVE:
To study the value of anti-neutrophil cytoplasmic antibody (ANCA) in assessing the severity of bronchiolitis obliterans (BO) in children.
METHODS:
A prospective analysis was performed on 59 children who were diagnosed with BO from June 2009 to October 2014. ELISA was used to measure the concentrations of myeloperoxidase (MPO)-ANCA and proteinase 3 (PR3)-ANCA in serum. According to the results of ELISA, the children were divided into three groups: double-negative ANCA (n=22), single-positive ANCA (n=17), and double-positive ANCA (n=20). The three groups were compared in terms of the scores of BO risk factors, clinical symptoms, chest high-resolution computed tomography (HRCT), and lung pathology on admission, as well as the changes in the expression level of ANCA and the scores of clinical symptoms and chest HRCT over time.
RESULTS:
Compared with the double-negative ANCA group, the double-positive ANCA group had a significantly higher score of BO risk factors (P<0.05), and the single-positive ANCA group and the double-positive ANCA group had significantly higher scores of clinical symptoms, chest HRCT, and lung pathology (P<0.05). The children were followed up for 6 months after discharge, and there were significant reductions in MPO-ANCA and PR3-ANCA titers from admission and discharge to the end of follow-up (P<0.05), as well as a significant reduction in the score of clinical symptoms from admission to the end of follow-up (P<0.05), while there was no significant change in the score of chest HRCT from admission to the end of follow-up (P>0.05). The single-positive ANCA and double-positive ANCA groups still had a significantly higher score of clinical symptoms than the double-negative ANCA group (P<0.05).
CONCLUSIONS
The expression level of ANCA is correlated with the severity of BO in children and thus has certain clinical significance in disease evaluation.
Antibodies, Antineutrophil Cytoplasmic
;
Bronchiolitis Obliterans
;
Child
;
Humans
;
Myeloblastin
;
Peroxidase
;
Prospective Studies
7.Expert consensus statement on Hugan Tablets in clinical practice.
Huan LIU ; Rong-Bing WANG ; Yan-Ming XIE ; Yuan-Yuan LI ; Xing LIAO ; Shao-Neng LIU ; Yong-An YE ; Chun-Yan GOU ; Si-Yan ZHAN ; Yong-Yan WANG
China Journal of Chinese Materia Medica 2019;44(14):2943-2946
Hugan Tablets is a Chinese patent medicine,it has the function of anti-inflammation and reducing transaminase. Based on questionnaire investigation of doctors and a systematic review of research literature on Hugan Tablets,using international clinical practice guidelines' developing methods,with the best available evidence and fully combining expert experience,and following the principle of " evidence-based,consensus-based and experience-based",Expert consensus statement on Hugan Tablets in clinical practice was developed by more than 30 multidisciplinary experts from the nationwide,aimed at guiding and standardizing the rational use of Hugan Tablets by clinicians and to improve clinical efficacy and safety. The expert consensus adopts internationally recognized recommendation criteria for classification of evidence: GRADE. The formation of expert consensus adopts the nominal group technique. Six main considerations are quality of evidence,curative effect,safety,economical efficiency,patient acceptability and other factors. If there is sufficient evidence,a " recommendation" is formed,using GRADE grid voting rule. If there isn' t sufficient evidence,a " consensus opinion" is formed,using majority counting rule. Focus on the indication,usage and dosage,drug use in special population and safety of Hugan Tablets,two recommendations and eight consensus opinions were put forward. Through expert meetings and correspondence,a nationwide consultation and peer review was conducted. This consensus applies to clinicians in hospitals and grass-roots health services,to provide guidance and reference for the rational use of Hugan Tablets.
Consensus
;
Drugs, Chinese Herbal
;
therapeutic use
;
Humans
;
Inflammation
;
drug therapy
;
Nonprescription Drugs
;
Tablets
8.Clinical research of transurethral turning holmium laser enucleation of the prostate in the treatment of benign prostatic hyperplasia
Huilong TANG ; Neng ZHU ; Li LONG ; Xiangbin LI ; Huawei YANG ; Xiao XIE
Chinese Journal of Urology 2019;40(7):531-536
Objective To compare the efficacy and safety of turning holmium laser enucleation of the prostate (THoLEP) and transurethral holmium laser enucleation of the prostate (HoLEP) in the treatment of benign prostatic hyperplasia (BPH).Methods A retrospective analysis of 532 patients with BPH surgery from January 2016 to December 2017 was performed,including 289 cases of transurethral resection of holmium laser enucleation (THoLEP) and 43 cases of transurethral holmium laser enucleation (HoLEP).Cases with incomplete data were excluded.Finally,100 patients were enrolled and divided into THoLEP group and HoLEP.The mean ages of patients in the THoLEP group and the HoLEP group were (74.6 ± 8.2) years and (75.3 ± 7.7) years,respectively.The prostate weights were (52.3 ± 23.1) g and (52.6 ± 22.7) g,respectively.International prostate symptom scores (IPSS) were (22.8 ± 1.3) and (23.1 ± 1.6),and the quality of life score (QOL) scores were (4.4 ± 0.5) and (4.3 ± 0.8),respectively.The rate of mximum flow rate (Qmax) was (5.9 ± 2.7) ml/s and (6.3 ± 2.8) mL/s,respectively.The residual urine volume was (149.3 ± 8.7) ml and (145.3 ± 9.7) ml,respectively.There was no significant difference between the two groups (P > 0.05).Results Compared with HoLEP group,THoLEP group showed shorter operation time [(44 ± 13) min vs.(61 ± 15) min,P < 0.05] and less intraoperative bleeding [(101.6 ± 13.2) ml vs.(119.9 ± 18.0) ml,P < 0.05].The weight of the resected tissue in the THoLEP group was slightly larger than that in the HoLEP group,however the difference was not statistically significant [(30.5 ± 9.5) g vs.(28.7 ± 8.5) g] (P > 0.05).The incidence of transient urinary incontinence in THoLEP group was less than that in HoLEP group [2 and 4 cases,P < 0.05].There were no cases of urinary incontinence in both groups after 3 months,and no permanent urinary incontinence in both groups.THoLEP was slightly better than HoLEP group,but the difference was not statistically significant (P >0.05).Conclusions Compared with HoLEP,THoLEP has similar short-term results,and has more advantages in shortening the operation time,reducing intraoperative bleeding and transient urinary incontinence.It is a safer and effective method for the treatment of benign prostatic hyperplasia.
9.Study on quality of standard decoction of Coptidis Rhizoma based on traditional decoction process.
Shuang GUO ; Qian-Neng SHEN ; Hong-Hong CAO ; Ping LI ; Ke-Wei ZHANG ; Hui XIE ; Guo-Jun YAN ; Tu-Lin LU ; Chun-Qin MAO
China Journal of Chinese Materia Medica 2019;44(18):3985-3993
In order to determine the quality evaluation method for standard decoction of Coptidis Rhizoma,15 batches of standard decoction of Coptidis Rhizoma were prepared by using standardized process. Parameters such as traits,p H value,indicative component content,fingerprint similarity,composition transfer rate and dry extract rate were selected as the indexes for quality evaluation. Similarity evaluation and cluster analysis were performed for HPLC fingerprint of standard decoction,and mathematical model was used to study the correlation between dry extract rate,berberine content,berberine transfer rate in standard decoction and berberine content in decoction pieces. The results showed that the similarity of fingerprints was greater than 0. 99 for these 15 batches of standard decoctions of Coptidis Rhizoma. In cluster analysis,the standard decoctions of Coptidis Rhizoma from 4 producing areas were classified into 3 categories,consistent with the content determination results,indicating that there were quality differences among different producing areas.R2 in three linear regression mathematical models established was all greater than 0. 9,with significant difference. The validation of three batches of data showed that the models had good accuracy. Therefore,this model can be used to predict the quality of standard decoction prepared from different Coptidis Rhizoma pieces. In the standard decoction process established in this study,the integrity of the traditional process was greatly preserved,and the established quality evaluation method could be used to comprehensively examine the quality of the standard decoction,which can provide a demonstration for the related research of water extraction preparation containing Coptidis Rhizoma pieces.
Berberine/analysis*
;
Chromatography, High Pressure Liquid
;
Coptis/chemistry*
;
Coptis chinensis
;
Drugs, Chinese Herbal/analysis*
;
Linear Models
;
Quality Control
;
Rhizome/chemistry*
10.Analysis of Technical Evaluation for Current Regulation of 3D Printed Customized Medical Device.
Chinese Journal of Medical Instrumentation 2018;42(4):279-281
This paper summarizes the current research status of 3D printed customized medical devices regulations in US and EU. Based on the discussion of 3D printed customized medical devices in the US and the European Union, some thoughts are put forward from design, manufacturing, testing and other aspects.
Equipment and Supplies
;
European Union
;
Printing, Three-Dimensional
;
United States

Result Analysis
Print
Save
E-mail