Objective To investigate the value of the novel lymphatic contrast-enhanced ultrasound(LCEUS)and conventional venous contrast-enhanced ultrasound(VCEUS)in the differential diagnosis of benign and malignant cervical lymph nodes in patients with thyroid cancer. Methods Patients with suspected thyroid cancer underwent conventional ultrasound,VCEUS,and LCEUS examinations of cervical lymph nodes before biopsy.The diagnostic abilities of conventional ultrasound,VCEUS,and LCEUS were compared with pathological results as the golden standard. Results Forty-four patients with 52 lymph nodes were included in the final data.Thirty-eight metastatic lymph nodes were confirmed by pathological results,and 14 were benign.The diagnostic sensitivity,specificity,and accuracy were 97.37%,71.43%,and 90.38% for LCEUS,92.11%,35.71%,and 76.92% for VCEUS,and 94.74%,21.43%,and 75.00% for conventional ultrasound,respectively.The area under the curve of LCEUS analyzed by the receiver operating characteristic curve was greater than that of VCEUS(P=0.020)and conventional ultrasound(P<0.001). Conclusion LCEUS could significantly improve the differential diagnosis of cervical lymph node metastasis in the patients with thyroid cancer,providing a basis for precise clinical treatment.
Humans ; Thyroid Neoplasms/diagnostic imaging* ; Lymphatic Metastasis/diagnostic imaging* ; Diagnosis, Differential ; Female ; Male ; Middle Aged ; Ultrasonography ; Adult ; Lymph Nodes/pathology* ; Contrast Media ; Neck ; Aged ; Young Adult ; Adolescent ; Sensitivity and Specificity

OBJECTIVE: To evaluate precise assessment methods for predicting the optimal acetabular cup size in total hip arthroplasty (THA). METHODS: A clinical data of 73 patients (80 hips) who underwent primary THA between December 2022 and July 2024 and met the inclusion criteria was analyzed. There were 39 males and 34 females with an average age of 66.3 years (range, 56-78 years). Among them, 66 cases were unilateral THA and 7 were bilateral THAs. There were 29 patients (34 hips) of osteoarthritis, 35 patients (35 hips) of femoral neck fractures, and 9 patients (11 hips) of osteonecrosis of the femoral head. Based on anteroposterior pelvic X-ray films, three methods were employed to predict acetabular cup size, including preoperative template planning, radiographic femoral head diameter (FHD) measurement, and intraoperative FHD measurement. The predicted acetabular cup sizes from these methods were compared with the actual implanted sizes. RESULTS: The predicted acetabular cup sizes using the preoperative template planning, radiographic FHD measurement, and intraoperative FHD measurement were (51.25±2.81), (49.72±3.11), and (49.90±2.74) mm, respectively, compared to the actual implanted cup size of (50.57±2.74) mm, with no significant difference ( P>0.05). Regarding agreement with the actual implanted cup size, the preoperative template planning achieved exact matches in 35 hips (43.75%), one-size deviation in 41 hips (51.25%), and two-size deviations in 4 hips (5%); the radiographic FHD measurement achieved exact matches in 12 hips (15%), one-size deviation in 57 hips (71.25%), and two-size deviations in 11 hips (13.75%); and the intraoperative FHD measurement achieved exact matches in 26 hips (32.5%), one-size deviation in 52 hips (65%), and two-size deviations in 2 hips (2.5%). There were significant differences in agreement distributions between the three methods and the actual implanted cup sizes ( H=18.579, P<0.001). CONCLUSION The intraoperative FHD measurement, as a simple, cost-effective, and accurate method, effectively guides acetabular cup selection, reduces the risk of prosthesis wear, enhances postoperative joint stability.
Humans ; Arthroplasty, Replacement, Hip/instrumentation* ; Male ; Female ; Middle Aged ; Acetabulum/diagnostic imaging* ; Aged ; Hip Prosthesis ; Prosthesis Design ; Femur Head/surgery* ; Osteoarthritis, Hip/surgery* ; Radiography ; Femoral Neck Fractures/surgery* ; Femur Head Necrosis/surgery*

OBJECTIVE: To investigate the effectiveness of using 3 hollow compression screws combined with 1 screw off-axis fixation under the guidance of three-dimensional (3D) printed guide plate with mortise-tenon joint structure (mortise-tenon joint plate) for the treatment of Pauwels type Ⅲ femoral neck fractures. METHODS: A clinical data of 78 patients with Pauwels type Ⅲ femoral neck fractures, who were admitted between August 2022 and August 2023 and met the selection criteria, was retrospectively analyzed. The operations were assisted with mortise-tenon joint plates in 26 cases (mortise-tenon joint plate group) and traditional guide plates in 28 cases (traditional plate group), and without guide plates in 24 cases (control group). There was no significant difference in the baseline data of gender, age, body mass index, cause of injury, and fracture side between groups ( P>0.05). The operation time, intraoperative blood loss, frequency of intraoperative fluoroscopy, incision length, incidence of postoperative deep vein thrombosis of lower extremity, pain visual analogue scale (VAS) score at 1 week after operation, and Harris score of hip joint at 3 months after operation were recorded and compared. X-ray re-examination was taken to check the quality of fracture reduction, fracture healing, and the shortening length of the femoral neck at 3 months after operation, and the incidences of internal fixation failure and osteonecrosis of the femoral head during operation. RESULTS: Compared with the control group, the operation time, intraoperative blood loss, and frequency of intraoperative fluoroscopy reduced in the two plate groups, and the quality of fracture reduction was better, but the incision was longer, and the differences were significant ( P<0.05). The operation time and intraoperative blood loss were significantly higher in the traditional plate group than in the mortise-tenon joint plate group ( P<0.05), the incision was significantly longer ( P<0.05); and the difference in fracture reduction quality and the frequency of intraoperative fluoroscopy was not significant between two plate groups ( P>0.05). There was 1 case of deep vein thrombosis of lower extremity in the traditional plate group and 1 case in the control group, while there was no thrombosis in the mortise-tenon joint plate group. There was no significant difference in the incidence between groups ( P>0.05). All patients were followed up 12-15 months (mean, 13 months). There was no significant difference in VAS score at 1 week and Harris score at 3 months between groups ( P>0.05). Compared with the control group, the fracture healing time and the length of femoral neck shortening at 3 months after operation were significantly shorter in the two plate groups ( P<0.05). There was no significant difference between the two plate groups ( P>0.05). There was no significant difference in the incidences of non-union fractures, osteonecrosis of the femoral head, or internal fixation failure between groups ( P>0.05). CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the use of 3D printed guide plate assisted reduction and fixation can shorten the fracture healing time, reduce the incidence of postoperative complications, and be more conducive to the early functional exercise of the affected limb. Compared with the traditional guide plate, the mortise-tenon joint plate can reduce the intraoperative bleeding and shorten the operation time.
Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Plates ; Fracture Fixation, Internal/instrumentation* ; Male ; Female ; Retrospective Studies ; Middle Aged ; Bone Screws ; Adult ; Aged ; Treatment Outcome ; Printing, Three-Dimensional ; Operative Time

OBJECTIVE: To investigate whether adding 1 transverse screw (TS) to the triangular parallel cannulated screw (TPCS) fixation has a mechanical stability advantage for Pauwels type Ⅲ femoral neck fractures by conducting finite element analysis on four internal fixation methods. METHODS: Based on CT data of a healthy adult male volunteer's femur, three Pauwels type Ⅲ femoral neck fracture models (Pauwels angle 70°, Pauwels angle 80°, and Pauwels angle 70° combined with bone defect) were constructed using Mimics 21.0 software and SolidWorks 2017 software. Four different internal fixation models were built at the same time, including TPCS, TPCS+TS, three cross screws (TCS), and TPCS+medial buttress plate (MBP). The mechanical stability of different models under the same load was compared by finite element analysis. RESULTS: The femoral model established in this study exhibited a maximum stress of 28.62 MPa, with relatively higher stress concentrated in the femoral neck. These findings were comparable to previous studies, indicating that the constructed femoral finite element model was correct. The maximum stress of internal fixation in finite element analysis showed that TCS was the lowest and TPCS+MBP was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. The maximum displacement of internal fixation in each fracture model was located at the top of the femoral head, with TCS having the highest maximum displacement of the femur. The maximum stress of fracture surface in finite element analysis showed that TCS was the lowest and TPCS was the highest in the Pauwels angle 70° model, while TPCS+MBP was the lowest and TPCS/TCS were the highest in the Pauwels angle 80° model and the Pauwels angle 70° combined with bone defect model, respectively. The maximum displacement of fracture surfece analysis showed that TPCS+MBP was the lowest and TCS was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the biomechanical stability of TPCS+TS was superior to that of TPCS alone and TCS, but it has not yet reached the level of TPCS+MBP.
Finite Element Analysis ; Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Bone Plates ; Stress, Mechanical ; Biomechanical Phenomena ; Tomography, X-Ray Computed ; Adult ; Femur Neck/surgery*

OBJECTIVE: To investigate the effectiveness of Holosight robotic navigation-assisted percutaneous cannulated screw fixation for femoral neck fractures. METHODS: A retrospective analysis was conducted on 65 patients with femoral neck fractures treated with cannulated screw fixation between January 2022 and February 2024. Among them, 31 patients underwent robotic navigation-assisted screw placement (navigation group), while 34 underwent conventional freehand percutaneous screw fixation (freehand group). Baseline characteristics, including age, gender, fracture side, injury mechanism, Garden classification, Pauwels classification, and time from injury to operation, showed no significant differences between the two groups ( P>0.05). The operation time, intraoperative blood loss, fluoroscopy frequency, fracture healing time, and complications were recorded and compared, and hip function was evaluated by Harris score at last follow-up. Postoperative anteroposterior and lateral hip X-ray films were taken to assess screw distribution accuracy, including deviation from the femoral neck axis, inter-screw parallelism, and distance from screws to the femoral neck cortex. RESULTS: No significant difference was observed in operation time between the two groups ( P>0.05). However, the navigation group demonstrated superior outcomes in intraoperative blood loss, fluoroscopy frequency, deviation from the femoral neck axis, inter-screw parallelism, and distance from screws to the femoral neck cortex ( P<0.05). No incision infections or deep vein thrombosis occurred. All patients were followed up 12-18 months (mean, 16 months). In the freehand group, 1 case suffered from cannulated screw dislodgement and nonunion secondary to osteonecrosis of femoral head at 1 year after operation, 1 case suffered from screw penetration secondary to osteonecrosis of femoral head at 5 months after operation; and 1 case suffered from nonunion secondary to osteonecrosis of femoral head at 6 months after operation in the navigation group. All the 3 patients underwent internal fixators removal and total hip arthroplasty. There was no significant difference in the incidence of complications between the two groups ( P>0.05). The fracture healing time and hip Harris score at last follow-up in the navigation group were significantly better than those in the freehand group ( P<0.05). CONCLUSION Compared to freehand percutaneous screw fixation, Holosight robotic navigation-assisted cannulated screw fixation for femoral neck fractures achieves higher precision, reduced intraoperative radiation exposure, smaller incisions, and superior postoperative hip function recovery.
Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Female ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Middle Aged ; Aged ; Adult ; Treatment Outcome ; Operative Time ; Fracture Healing ; Surgery, Computer-Assisted/methods* ; Fluoroscopy

Injuries deeper than the platysma are considered as penetrating neck injuries, constituting approximately 5% - 10% of all trauma. Many vital organs are at risk from a penetrating neck injury. These injuries in zone 1 have the highest mortality, because the injuries are close to the vital organs and difficult to access surgically. A 41-year-old male, a car mechanic by profession, presented to the emergency department with a penetrating neck injury on the right side. CT scan demonstrated a metallic foreign body in zone 1 between the right internal jugular vein and the common carotid artery. The patient was asymptomatic, and the foreign body was removed surgically. This case shows a rare presentation of a penetrating neck injury with a foreign body located in zone 1, where no vital internal structure was injured. As of now, no previous case report has been identified on such presentation. Thus, it will provide a valuable addition to the pre-existing literature.
Humans ; Male ; Adult ; Neck Injuries/diagnostic imaging* ; Wounds, Penetrating/diagnostic imaging* ; Foreign Bodies/diagnostic imaging* ; Jugular Veins ; Tomography, X-Ray Computed ; Carotid Artery Injuries/surgery* ; Carotid Artery, Common

Objective:This aims to investigate the diagnostic and evaluative value of MRI for lymphatic malformations in the head, neck, and facial regions of children. Methods:A retrospective analysis was conducted on the MRI imaging data of 31 cases of head, neck, and facial lymphatic malformations in children admitted to the Department of Otolaryngology, Head and Neck Surgery, Children's Hospital Affiliated to Shanghai Jiao Tong University School of Medicine, from January 2022 to January 2024. Results:The MRI images of this group of cases primarily displayed irregular morphology（80.6%, 25/31）, thin-walled cysts（80.6%, 25/31）, and compression of surrounding tissues. The boundaries were clear（100%, 31/31）, with characteristics of invasive and drill-like growth（93.5%）. The cyst walls or internal septa exhibited high signal intensity on T1WI, low signal intensity on T2WI, and mild to moderate enhancement（100%）. The contents of the cysts showed low signal intensity on T1WI, high signal intensity on T2WI, and no enhancement（35.5%, 11/31）. Mixed signals with varying degrees of enhancement were observed in 20 cases（64.5%）. There were 29 cases of multilocular cysts（93.5%, 29/31）, and 11 cases of fluid-fluid levels（35.5%）. The MRI diagnostic accuracy for this group of cases was 100%. Conclusion:Lymphatic Malformations of head, neck and facial region in children have very characteristic features on MRI, such as typical thin wall, clear boundaries, irregular shapes, invasive growth, no enhancement, multilocular cystic masses, fluid-fluid level, etc. Furthermore, it is more appropriate for children with lymphatic malformations owing to its non-radiation and non-invasive benefits. Diagnosing lymphatic malformations in the head, neck, and facial region in children should begin with this.
Humans ; Retrospective Studies ; Lymphatic Abnormalities/diagnostic imaging* ; Magnetic Resonance Imaging ; Neck/diagnostic imaging* ; Head/diagnostic imaging* ; Face/diagnostic imaging* ; Child ; Male ; Female ; Child, Preschool ; Adolescent ; Infant

OBJECTIVES: To analyze bone mass distribution and the factors affecting bone mass in a general Chinese Han cohort undergoing physical examinations at our center. METHODS: We retrospectively collected the data of bone mineral density (BMD) measurements from 30 599 healthy Han Chinese adults (age≥20 years) who underwent dual-energy X-ray absorptiometry scans at our hospital from July, 2013 to July, 2023. Basic parameters including height, body weight, and gender were recorded, and descriptive statistics and correlation analyses were performed using R software. RESULTS: In this cohort, the male individuals had a mean peak BMD of 1.00±0.12 g/cm² in the lumbar vertebrae, 0.94±0.14 g/cm² in the femoral neck, and 0.99±0.13 g/cm² in the total hip, significantly higher than the values in the female individuals [0.99±0.12 g/cm² in the lumbar vertebrae (P=0.022), 0.79±0.11 g/cm² in the femoral neck (P<0.001), and 0.88±0.11 g/cm² in the total hip (P<0.001)]. In the overall cohort, the BMD values of the lumbar spine and femur decreased with age after reaching their peak levels. There was a positive correlation between BMD value and body mass index (BMI) in both male and female individuals. The 2013-2014 period recorded the lowest BMD values in the lumbar, hip, and femoral neck, which tended to increase steadily in the following years (2015-2023). CONCLUSIONS Our data suggest that the BMD values vary among different populations, and future multi-center studies using more accurate BMD detection technology are warranted to capture the variation patterns of BMD with demographic characteristics of specific populations.
Humans ; Bone Density ; Absorptiometry, Photon ; Male ; Female ; Retrospective Studies ; Osteoporosis/diagnostic imaging* ; Adult ; Middle Aged ; Lumbar Vertebrae/diagnostic imaging* ; China/epidemiology* ; Femur Neck/diagnostic imaging* ; Aged ; Beijing/epidemiology* ; Young Adult

OBJECTIVE: To explore the effect of femoral neck cortical fragments and surfacial area on avascular necrosis(AVN) after internal fixation of femoral neck fractures based on CT imaging in young adult. METHODS: From January 2011 to January 2021, 218 young and middle-aged patients with femoral neck fractures were reverse triangle fixed with three cannulated lag screws, including 104 males and 114 females;aged 19 to 60 years old with a mean of (48.22±10.58) years old. The preoperative waiting time≤48 h was 155 cases, and the preoperative waiting time> 48 h was 63 cases; 68 cases were comminuted cortex of the femoral neck, 32 of them with superficial area of the comminuted cortex>25 mm². All patients were followed up for at least 2 years, the age, gender, injury side, body mass index, injury mechanism, preoperative waiting time, operation time, Garden classification, whether femoral neck cortex fracture and size by CT analysis and complications were analyzed the correlation to the definite occurrence of AVN. The AVN group and the non-AVN group were divided according to the final efficacy results.Univariate analysis yielded significant independent variables, Multiple Logistic regression analysis was further performed to identify the independent risk factors for AVN. RESULTS: By univariate analysis, the AVN and non-AVN groups were significant in injury mechanism(χ²=18.552, P=0.000), preoperative waiting time( χ²=2.065, P=0.033), Garden classification (χ²=12.598, P=0.006), comminuted cortex (χ²=16.357, P=0.000), and the superficial area of the comminuted cortex(χ²=23.371, 0.000, P=0.000). Multiple Logistic regression indicated injury mechanism high energy injury[Exp(B)=3.487, 95%CI(1.583, 10.464), P=0.002], comminuted cortex of the femoral neck[Exp(B)=2.494, 95%CI(1.315, 10.861), P=0.002];the superficial area of the comminuted cortex>25 mm²[Exp(B)=22.161, 95%CI(3.922, 1242.828), P=0.001] were independent risk factors for AVN after internal fixation of femoral neck fractures. CONCLUSION High energy injury mechanism, with comminuted cortex of the femoral neck and the superficial area of the comminuted cortex> 25 mm² were independent risk factors for AVN.The larger the superficial area of the cortex fragment may suggest more complicated injury mechanism and worse outcome.
Humans ; Male ; Female ; Adult ; Femoral Neck Fractures/diagnostic imaging* ; Tomography, X-Ray Computed ; Middle Aged ; Femur Head Necrosis/etiology* ; Young Adult ; Fracture Fixation, Internal/methods*

OBJECTIVE: To explore the related factors of femoral stem anteversion (FSA) after total hip arthroplasty (THA), so as to provide reference for clinical design of FSA before operation and reduce the risk of hip dislocation after arthroplasty. METHODS: Ninty-three patients (103 hips) who underwent THA between October 2021 and September 2022 and met the selection criteria were selected as the study subjects. Among them, there were 48 males and 45 females with an average age of 58.5 years (range, 25-88 years). Body mass index was 18.00-37.84 kg/m ², with an average of 24.92 kg/m ². There were 51 cases (57 hips) of osteonecrosis of femoral head, 35 cases (39 hips) of hip osteoarthritis, and 7 cases (7 hips) of congenital hip dysplasia. Based on CT images, the following indicators were measured: preoperative femoral neck anteversion (FNA), preoperative femoral rotation angle (FRA), preoperative acetabular anteversion (AA), and preoperative combined anteversion (CA; the sum of preoperative FNA and AA); postoperative FSA and the change in femoral anteversion angle (the difference between postoperative FSA and preoperative FNA). Based on preoperative X-ray films, the following indicators were measured: femoral cortical thickness index (CTI) and canal flare index (CFI), the proximal femoral medullary cavity was classified according to Noble classification (champagne cup type, normal type, chimney type), neck-shaft angle (NSA), and femoral offset (FO). Pearson correlation analysis, one-way ANOVA, and Point-biserial correlation analysis were used to investigate the correlation between postoperative FSA, postoperative change in femoral anteversion angle, and patient diagnosis, proximal femoral medullary cavity anatomy type, gender, age, as well as preoperative FNA, FRA, AA, CA, NSA, FO, CTI, and CFI. FSA was used as the dependent variable and the independent variables that may be related to it were included for multiple linear regression analysis. RESULTS: Based on CT image measurement, preoperative FNA was (15.96±10.01)°, FRA (3.36±10.87)°, AA (12.94±8.83)°, CA (28.9±12.6)°, postoperative FSA (16.18±11.01)°, and postoperative change in femoral anteversion angle was (0.22±9.98)°. Based on preoperative X-ray films measurements, the CTI was 0.586±0.081; the CFI was 4.135±1.125, with 23 hips classified as champagne cup type, 68 hips as normal type, and 12 hips as chimney type in the proximal femoral medullary cavity anatomy; NSA was (132.87±7.83)°; FO was (40.53±10.11) mm. There was no significant difference between preoperative FNA and postoperative FSA ( t=-0.227, P=0.821). Pearson correlation analysis showed that postoperative FSA was positively correlated with preoperative FNA, preoperative CA, postoperative change in femoral anteversion angle, and age ( P<0.05), while negatively correlated with preoperative FRA ( P<0.05). The postoperative change in femoral anteversion angle were positively correlated with preoperative FRA and postoperative FSA ( P<0.05), and negatively correlated with preoperative CA and FNA ( P<0.05). One-way ANOVA analysis showed that the above two indicators were not correlated with diagnosis and the proximal femoral medullary cavity anatomy type ( P>0.05). Multiple linear regression analysis showed a linear correlation between FSA and FNA, CA, age, and FRA ( F=10.998, P<0.001), and the best fit model was FSA=0.48×FNA-2.551. CONCLUSION The factors related to FSA after THA include patient's age, preoperative FNA, CA, FRA and postoperative femoral anteversion, of which preoperative FNA is the most closely related. When designing a surgical plan before surgery, attention should be paid to the patient's preoperative FNA, and if necessary, CT around the hip joint should be scanned to gain a detailed understanding of the proximal femoral anatomical structure.
Female ; Male ; Humans ; Middle Aged ; Arthroplasty, Replacement, Hip ; Femur/diagnostic imaging* ; Femur Neck ; Femur Head ; Hip Joint