The wide use of ZnO and CuO nanoparticles in research, medicine, industry, and other fields has raised concerns about their biosafety. It is therefore unavoidable to be discharged into the sewage treatment system. Due to the unique physical and chemical properties of ZnO NPs and CuO NPs, it may be toxic to the members of the microbial community and their growth and metabolism, which in turn affects the stable operation of sewage nitrogen removal. This study summarizes the toxicity mechanism of two typical metal oxide nanoparticles (ZnO NPs and CuO NPs) to nitrogen removal microorganisms in sewage treatment systems. Furthermore, the factors affecting the cytotoxicity of metal oxide nanoparticles (MONPs) are summarized. This review aims to provide a theoretical basis and support for the future mitigating and emergent treatment of the adverse effects of nanoparticles on sewage treatment systems.
Wastewater/toxicity* ; Sewage/chemistry* ; Zinc Oxide/chemistry* ; Waste Disposal, Fluid ; Nanoparticles/chemistry* ; Metal Nanoparticles/chemistry* ; Nitrogen/metabolism* ; Water Purification

To investigate the formation of polystyrene nanoplastic-plant protein corona and its potential impact on plants, three differently modified polystyrene nanoplastics with an average particle size of 200 nm were taken to interact with the leaf proteins of Impatiens hawkeri for 2 h, 4 h, 8 h, 16 h, 24 h, and 36 h, respectively. The morphological changes were observed by scanning electron microscopy (SEM), the surface roughness was determined by atomic force microscopy (AFM), the hydrated particle size and zeta potential were determined by nanoparticle size and zeta potential analyzer, and the protein composition of the protein corona was identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The proteins were classified in terms of biological processes, cellular components, and molecular functions to study the adsorption selection of nanoplastics to proteins, investigate the formation and characteristics of polystyrene nanoplastic-plant protein corona and predict the potential impact of protein corona on plants. The results showed that the morphological changes of the nanoplastics became clearer as the reaction time extends, as evidenced by the increase in size and roughness and the enhancement of stability, thus demonstrating the formation of protein corona. In addition, the transformation rate from soft to hard protein corona was basically the same for the three polystyrene nanoplastics in the formation of protein corona with leaf proteins under the same protein concentration conditions. Moreover, in the reaction with leaf proteins, the selective adsorption of the three nanoplastics to proteins with different isoelectric points and molecular weights differed, and the particle size and stability of the final formed protein corona also differed. Since a large portion of the protein fraction in protein corona is involved in photosynthesis, it is hypothesized that the formation of the protein corona may affect photosynthesis in I. hawkeri.
Polystyrenes/chemistry* ; Protein Corona/chemistry* ; Microplastics ; Plant Proteins ; Chromatography, Liquid ; Tandem Mass Spectrometry ; Nanoparticles/chemistry*

This study aimed to investigate the effects of nanoparticles PLGA-NPs and mesoporous silicon nanoparticles(MSNs) of different stiffness before and after combination with menthol or curcumol on the mechanical properties of bEnd.3 cells. The particle size distributions of PLGA-NPs and MSNs were measured by Malvern particle size analyzer, and the stiffness of the two nanoparticles was quantified by atomic force microscopy(AFM). The bEnd.3 cells were cultured in vitro, and the cell surface morphology, roughness, and Young's modulus were examined to characterize the roughness and stiffness of the cell surface. The changes in the mechanical properties of the cells were observed by AFM, and the structure and expression of cytoskeletal F-actin were observed by a laser-scanning confocal microscope. The results showed that both nanoparticles had good dispersion. The particle size of PLGA-NPs was(98.77±2.04) nm, the PDI was(0.140±0.030), and Young's modulus value was(104.717±8.475) MPa. The particle size of MSNs was(97.47±3.92) nm, the PDI was(0.380±0.016), and Young's modulus value was(306.019±8.822) MPa. The stiffness of PLGA-NPs was significantly lower than that of MSNs. After bEnd.3 cells were treated by PLGA-NPs and MSNs separately, the cells showed fine pores on the cell surface, increased roughness, decreased Young's modulus, blurred and broken F-actin bands, and reduced mean gray value. Compared with PLGA-NPs alone, PLGA-NPs combined with menthol or curcumol could allow deepened and densely distributed surface pores of bEnd.3 cells, increase roughness, reduce Young's modulus, aggravate F-actin band breakage, and diminish mean gray value. Compared with MSNs alone, MSNs combined with menthol could allow deepened and densely distributed surface pores of bEnd.3 cells, increase roughness, reduce Young's modulus, aggravate F-actin band breakage, and diminish mean gray value, while no significant difference was observed in combination with curcumol. Therefore, it is inferred that the aromatic components can increase the intracellular uptake and transport of nanoparticles by altering the biomechanical properties of bEnd.3 cells.
Animals ; Mice ; Menthol/pharmacology* ; Actins/metabolism* ; Endothelial Cells/metabolism* ; Nanoparticles/chemistry*

The application of intraocular drug delivery is usually limited due to special anatomical and physiological barriers, and the elimination mechanisms in the eye. Organic nano-drug delivery carriers exhibit excellent adhesion, permeability, targeted modification and controlled release abilities to overcome the obstacles and improve the efficiency of drug delivery and bioavailability. Solid lipid nanoparticles can entrap the active components in the lipid structure to improve the stability of drugs and reduce the production cost. Liposomes can transport hydrophobic or hydrophilic molecules, including small molecules, proteins and nucleic acids. Compared with linear macromolecules, dendrimers have a regular structure and well-defined molecular mass and size, which can precisely control the molecular shape and functional groups. Degradable polymer materials endow nano-delivery systems a variety of size, potential, morphology and other characteristics, which enable controlled release of drugs and are easy to modify with a variety of ligands and functional molecules. Organic biomimetic nanocarriers are highly optimized through evolution of natural particles, showing better biocompatibility and lower toxicity. In this article, we summarize the advantages of organic nanocarriers in overcoming multiple barriers and improving the bioavailability of drugs, and highlight the latest research progresses on the application of organic nanocarriers for treatment of ocular diseases.
Drug Carriers ; Delayed-Action Preparations ; Drug Delivery Systems ; Nanoparticles/chemistry*

Nucleoside drugs play an essential role in treating major diseases such as tumor and viral infections, and have been widely applied in clinics. However, the effectiveness and application of nucleoside drugs are significantly limited by their intrinsic properties such as low bioavailability, lack of targeting ability, and inability to enter the cells. Nanocarriers can improve the physiological properties of nucleoside drugs by improving drug delivery efficiency and availability, maintaining drug efficacy and system stability, adjusting the binding ability of the carrier and drug molecules, as well as modifying specific molecules to achieve active targeting. Starting from the design strategy of nucleoside drug nanodelivery systems, the design and therapeutic effect of these nanomedicines are described in this review, and the future development directions of nucleoside/nucleotide-loaded nanomedicines are also discussed.
Nanomedicine ; Nucleosides/chemistry* ; Nucleotides ; Nanoparticles/chemistry* ; Drug Delivery Systems ; Drug Carriers

Currently, the first-line drugs for invasive fungal infections (IFI), such as amphotericin B, fluconazole and itraconazole, have drawbacks including poor water solubility, low bioavailability, and severe side effects. Using drug delivery systems is a promising strategy to improve the efficacy and safety of traditional antifungal therapy. Synthetic and biomimetic carriers have greatly facilitated the development of targeted delivery systems for antifungal drugs. Synthetic carrier drug delivery systems, such as liposomes, nanoparticles, polymer micelles, and microspheres, can improve the physicochemical properties of antifungal drugs, prolong their circulation time, enhance targeting capabilities, and reduce toxic side effects. Cell membrane biomimetic drug delivery systems, such as macrophage or red blood cell membrane-coated drug delivery systems, retain the membrane structure of somatic cells and confer various biological functions and specific targeting abilities to the loaded antifungal drugs, exhibiting better biocompatibility and lower toxicity. This article reviews the development of antifungal drug delivery systems and their application in the treatment of IFI, and also discusses the prospects of novel biomimetic carriers in antifungal drug delivery.
Antifungal Agents/therapeutic use* ; Drug Delivery Systems ; Amphotericin B/therapeutic use* ; Liposomes/chemistry* ; Nanoparticles ; Drug Carriers

Flavonoids have been reported to possess significant pharmacological activities,such as antioxidant, anti-inflammatory and anticancer effects. However, the low solubility and low bioavailability limits their clinical application. Nanocrystal technology can solve the delivery problems of flavonoids by reducing particle size, increasing the solubility of insoluble drugs and improving their bioavailability. This article summaries nanosuspension preparation methods and the stabilizers for flavonoid nanocrystals, and reviews the drug delivery routes including oral, Injection and transdermal of flavonoid nanocrystals, to provide information for further research on nanocrystal delivery system of flavonoids.
Flavonoids/pharmacology* ; Pharmaceutical Preparations/chemistry* ; Biological Availability ; Nanoparticles/chemistry* ; Anti-Inflammatory Agents ; Particle Size

Objective:To prepare PLGA nanoparticles loaded with Der f 1/IGF-1（Der f 1/IGF-1 NPs） and investigate their role in promoting the formation of Treg cells. Methods:NPs coated with Der f 1/IGF-1 were prepared by double emulsion method and their physicochemical properties and cumulative release rate in vitro were analyzed. After pretreatment, BMDC was divided into Saline group, Blank NPs group, Der f 1/IGF-1 group and Der f 1/IGF-1 NPs group. Determination of the expression of IL-10 and TGF-β in BMDC by ELISA. The number of Treg cells was detected by flow cytometry. Results:The results showed that Der f 1/IGF-1 NPs were spherical structures, with good dispersion, particle size less than 200 nm, negative charge and stable slow-release effect of Zeta potential. After BMDC pretreatment, the expression levels of TGF-β and IL-10 in BMDC cells in the Der f 1/IGF-1 NPs group were significantly increased compared with the Blank NPs group, and the difference was statistically significant（P<0.001）. After co-culture with CD4+ T cells, the proportion of Treg cells produced in the Der f 1/IGF-1 NPs group was significantly increased, and the difference was statistically significant（P<0.001）. Conclusion:Der f 1/IGF-1 NPs can induce Treg cell generation in vitro. This study provides a new and more effective method for the reconstruction of immune tolerance dysfunction.
Humans ; T-Lymphocytes, Regulatory/metabolism* ; Interleukin-10/metabolism* ; Insulin-Like Growth Factor I ; Transforming Growth Factor beta ; Nanoparticles/chemistry* ; Particle Size ; Drug Carriers/chemistry*

Polymer nanoparticles generally refer to hydrophobic polymers-based nanoparticles, which have been extensively studied in the nanomedicine field due to their good biocompatibility, efficient long-circulation characteristics, and superior metabolic discharge patterns over other nanoparticles. Existing studies have proved that polymer nanoparticles possess unique advantages in the diagnosis and treatment of cardiovascular diseases, and have been transformed from basic researches to clinical applications, especially in the diagnosis and treatment of atherosclerosis (AS). However, the inflammatory reaction induced by polymer nanoparticles would induce the formation of foam cells and autophagy of macrophages. In addition, the variations in the mechanical microenvironment of cardiovascular diseases may cause the enrichment of polymer nanoparticles. These could possibly promote the occurrence and development of AS. Herein, this review summarized the recent application of polymer nanoparticles in the diagnosis and treatment of AS, as well as the relationship between polymer nanoparticles and AS and the associated mechanism, with the aim to facilitate the development of novel nanodrugs for the treatment of AS.
Humans ; Polymers/chemistry* ; Cardiovascular Diseases ; Nanoparticles/chemistry* ; Drug Delivery Systems ; Atherosclerosis/pathology*

Antibiotics are playing an increasingly important role in clinical antibacterial applications. However, their abuse has also brought toxic and side effects, drug-resistant pathogens, decreased immunity and other problems. New antibacterial schemes in clinic are urgently needed. In recent years, nano-metals and their oxides have attracted wide attention due to their broad-spectrum antibacterial activity. Nano-silver, nano-copper, nano-zinc and their oxides are gradually applied in biomedical field. In this study, the classification and basic properties of nano-metallic materials such as conductivity, superplasticity, catalysis, and antibacterial activities were firstly introduced. Secondly, the common preparation techniques, including physical, chemical and biological methods, were summarized. Subsequently, four main antibacterial mechanisms, such as cell membrane, oxidative stress, DNA destruction and cell respiration reduction, were summarized. Finally, the effect of size, shape, concentration and surface chemical characteristics of nano-metals and their oxides on antibacterial effectiveness and the research status of biological safety such as cytotoxicity, genotoxicity and reproductive toxicity were reviewed. At present, although nano-metals and their oxides have been applied in medical antibacterial, cancer treatment and other clinical fields, some issues such as the development of green preparation technology, the understanding of antibacterial mechanism, the improvement of biosafety, and the expansion of application fields, require further exploration.
Oxides/chemistry* ; Metal Nanoparticles/chemistry* ; Anti-Bacterial Agents/chemistry* ; Zinc ; Copper