Purpose: The purpose of this study is to evaluate Ti-base abutment’s three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer’s instructions. All 90 specimens were placed and tested in a universal testingmachine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performedusing Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights.After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height.However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion Although Ti-base abutment height did not influenced zirconia restorations’ retentiveness, cement types showed significant differences.

Early diagnosis and early treatment of human immunodeficiency virus (HIV) infection are essential for clinical and public health benefits. Diagnostic algorithms for early diagnosis are being emphasized, and rapid tests at the point of care have been expanded to improve voluntary testing rates. Despite advances in laboratory diagnostic tests, early HIV infection can still be missed due to window periods, and it is crucial to recognize the limitations of testing methods and the potential for false negative and false positive results.

Purpose: The purpose of this study is to evaluate Ti-base abutment’s three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer’s instructions. All 90 specimens were placed and tested in a universal testingmachine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performedusing Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights.After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height.However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion Although Ti-base abutment height did not influenced zirconia restorations’ retentiveness, cement types showed significant differences.

Early diagnosis and early treatment of human immunodeficiency virus (HIV) infection are essential for clinical and public health benefits. Diagnostic algorithms for early diagnosis are being emphasized, and rapid tests at the point of care have been expanded to improve voluntary testing rates. Despite advances in laboratory diagnostic tests, early HIV infection can still be missed due to window periods, and it is crucial to recognize the limitations of testing methods and the potential for false negative and false positive results.

Early diagnosis and early treatment of human immunodeficiency virus (HIV) infection are essential for clinical and public health benefits. Diagnostic algorithms for early diagnosis are being emphasized, and rapid tests at the point of care have been expanded to improve voluntary testing rates. Despite advances in laboratory diagnostic tests, early HIV infection can still be missed due to window periods, and it is crucial to recognize the limitations of testing methods and the potential for false negative and false positive results.

Purpose: The purpose of this study is to evaluate Ti-base abutment’s three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer’s instructions. All 90 specimens were placed and tested in a universal testingmachine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performedusing Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights.After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height.However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion Although Ti-base abutment height did not influenced zirconia restorations’ retentiveness, cement types showed significant differences.

Early diagnosis and early treatment of human immunodeficiency virus (HIV) infection are essential for clinical and public health benefits. Diagnostic algorithms for early diagnosis are being emphasized, and rapid tests at the point of care have been expanded to improve voluntary testing rates. Despite advances in laboratory diagnostic tests, early HIV infection can still be missed due to window periods, and it is crucial to recognize the limitations of testing methods and the potential for false negative and false positive results.

Background/Aims: To identify changes in symptoms and pulmonary sequelae in patients with coronavirus disease 2019 (COVID-19). Methods: Patients with COVID-19 hospitalized at seven university hospitals in Korea between February 2020 and February 2021 were enrolled, provided they had ≥ 1 outpatient follow-up visit. Between January 11 and March 9, 2021 (study period), residual symptom investigations, chest computed tomography (CT) scans, pulmonary function tests (PFT), and neutralizing antibody tests (NAb) were performed at the outpatient visit (cross-sectional design). Additionally, data from patients who already had follow-up outpatient visits before the study period were collected retrospectively. Results: Investigation of residual symptoms, chest CT scans, PFT, and NAb were performed in 84, 35, 31, and 27 patients, respectively. After 6 months, chest discomfort and dyspnea persisted in 26.7% (4/15) and 33.3% (5/15) patients, respectively, and 40.0% (6/15) and 26.7% (4/15) patients experienced financial loss and emotional distress, respectively. When the ratio of later CT score to previous ones was calculated for each patient between three different time intervals (1–14, 15–60, and 61–365 days), the median values were 0.65 (the second interval to the first), 0.39 (the third to the second), and 0.20 (the third to the first), indicating that CT score decreases with time. In the high-severity group, the ratio was lower than in the low-severity group. Conclusions In COVID-19 survivors, chest CT score recovers over time, but recovery is slower in severely ill patients. Subjects complained of various ongoing symptoms and socioeconomic problems for several months after recovery.

Human Q fever, a zoonosis caused by Coxiella burnetii, presents with diverse clinical manifestations ranging from mild self-limited febrile illnesses to life-threatening complications such as endocarditis or vascular infection. Although acute Q fever is a benign illness with a low mortality rate, a large-scale outbreak of Q fever in the Netherlands led to concerns about the possibility of blood transfusion-related transmission or obstetric complications in pregnant women. Furthermore, a small minority (< 5%) of patients with asymptomatic or symptomatic infection progress to chronic Q fever. Chronic Q fever is fatal in 5–50% of patients if left untreated. In South Korea, Q fever in humans was designated as a notifiable infectious disease in 2006, and the number of Q fever cases has increased sharply since 2015. Nonetheless, it is still considered a neglected and under-recognized infectious disease. In this review, recent trends of human and animal Q fever in South Korea, and public health concerns regarding Q fever outbreaks are reviewed, and we consider how a One Health approach could be applied as a preventive measure to prepare for zoonotic Q fever outbreaks.

Erythema nodosum (EN) is the most common form of panniculitis and may be triggered by a variety of stimuli, including infections, drugs, pregnancy, sarcoidosis, inflammatory bowel disease, and malignancies. Rare cases of vaccination-related EN have been reported, but none due to the coronavirus disease 2019 (COVID-19) vaccine of Pfizer have been documented. We report a case of EN associated with the Pfizer vaccine. A 43-year-old woman presented with acute-onset painful nodular lesions that appeared bilaterally on the extensor surface of the lower legs. These lesions appeared 5 days after the first dose of Pfizer vaccination. The patient reported no recent infectious history other than fever for 3 days after vaccination. Skin biopsy revealed inflammation extending into the subcutaneous fat with a septal distribution. It is important for physicians to be aware of the side effects of the COVID-19 vaccine because more people are bound to be vaccinated.