Patients with ectodermal dysplasia often have atrophied alveolar bone and an inadequate maxillomandibular relationship owing to congenital edentulism.Accurate implant placement that can overcomes anatomical limitations and orthognathic surgery to improve the maxillomandibular relationship is necessary for creating implant-supported prosthesis for these patients. Implant placement and provisional prosthesis fabrication before orthognathic surgery can provide critical fixed reference points and ensure accuracy during orthognathic surgery.In our patient, a digital system was used to design a surgical guide that considered the predictable position of the definitive prosthesis, allowing the placement of implants to overcome anatomical limitations and the creation of fixed reference points via the delivery of a provisional prosthesis for effective orthognathic surgery. The lack of compensation during orthognathic surgery was considered in the definitive prosthesis. As a result, a prosthesis with a minimal anterior cantilever was fabricated. This study aimed to determine the appropriate sequence of multidisciplinary collaborations that would, result in the best functional and aesthetic outcomes.

Patients with ectodermal dysplasia often have atrophied alveolar bone and an inadequate maxillomandibular relationship owing to congenital edentulism.Accurate implant placement that can overcomes anatomical limitations and orthognathic surgery to improve the maxillomandibular relationship is necessary for creating implant-supported prosthesis for these patients. Implant placement and provisional prosthesis fabrication before orthognathic surgery can provide critical fixed reference points and ensure accuracy during orthognathic surgery.In our patient, a digital system was used to design a surgical guide that considered the predictable position of the definitive prosthesis, allowing the placement of implants to overcome anatomical limitations and the creation of fixed reference points via the delivery of a provisional prosthesis for effective orthognathic surgery. The lack of compensation during orthognathic surgery was considered in the definitive prosthesis. As a result, a prosthesis with a minimal anterior cantilever was fabricated. This study aimed to determine the appropriate sequence of multidisciplinary collaborations that would, result in the best functional and aesthetic outcomes.

Patients with ectodermal dysplasia often have atrophied alveolar bone and an inadequate maxillomandibular relationship owing to congenital edentulism.Accurate implant placement that can overcomes anatomical limitations and orthognathic surgery to improve the maxillomandibular relationship is necessary for creating implant-supported prosthesis for these patients. Implant placement and provisional prosthesis fabrication before orthognathic surgery can provide critical fixed reference points and ensure accuracy during orthognathic surgery.In our patient, a digital system was used to design a surgical guide that considered the predictable position of the definitive prosthesis, allowing the placement of implants to overcome anatomical limitations and the creation of fixed reference points via the delivery of a provisional prosthesis for effective orthognathic surgery. The lack of compensation during orthognathic surgery was considered in the definitive prosthesis. As a result, a prosthesis with a minimal anterior cantilever was fabricated. This study aimed to determine the appropriate sequence of multidisciplinary collaborations that would, result in the best functional and aesthetic outcomes.

Patients with ectodermal dysplasia often have atrophied alveolar bone and an inadequate maxillomandibular relationship owing to congenital edentulism.Accurate implant placement that can overcomes anatomical limitations and orthognathic surgery to improve the maxillomandibular relationship is necessary for creating implant-supported prosthesis for these patients. Implant placement and provisional prosthesis fabrication before orthognathic surgery can provide critical fixed reference points and ensure accuracy during orthognathic surgery.In our patient, a digital system was used to design a surgical guide that considered the predictable position of the definitive prosthesis, allowing the placement of implants to overcome anatomical limitations and the creation of fixed reference points via the delivery of a provisional prosthesis for effective orthognathic surgery. The lack of compensation during orthognathic surgery was considered in the definitive prosthesis. As a result, a prosthesis with a minimal anterior cantilever was fabricated. This study aimed to determine the appropriate sequence of multidisciplinary collaborations that would, result in the best functional and aesthetic outcomes.

Patients with ectodermal dysplasia often have atrophied alveolar bone and an inadequate maxillomandibular relationship owing to congenital edentulism.Accurate implant placement that can overcomes anatomical limitations and orthognathic surgery to improve the maxillomandibular relationship is necessary for creating implant-supported prosthesis for these patients. Implant placement and provisional prosthesis fabrication before orthognathic surgery can provide critical fixed reference points and ensure accuracy during orthognathic surgery.In our patient, a digital system was used to design a surgical guide that considered the predictable position of the definitive prosthesis, allowing the placement of implants to overcome anatomical limitations and the creation of fixed reference points via the delivery of a provisional prosthesis for effective orthognathic surgery. The lack of compensation during orthognathic surgery was considered in the definitive prosthesis. As a result, a prosthesis with a minimal anterior cantilever was fabricated. This study aimed to determine the appropriate sequence of multidisciplinary collaborations that would, result in the best functional and aesthetic outcomes.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Objective: To investigate the effect of low frequency cerebellar repetitive transcranial magnetic stimulation (rTMS) on balance impairment in patients with cerebral infarction. Methods: Thirty-two patients were randomly divided into two groups: rTMS group (n=16) and control (n=16). In the rTMS group, treatment was performed five times per week for 2 weeks (10 sessions), and in the control group, a sham coil was used with the sound and sensation of scalp similar to the rTMS coil. Patients in both groups underwent a conventional rehabilitation program. Berg Balance Scale (BBS) was used as the primary outcome measurement. Timed Up and Go test (TUG), 10-m walk test (10mWT), and Activity-specific Balance Confidence scale (ABC) were used as the secondary outcome measurement. All scales were measured at baseline (T0), after 10 sessions of rTMS (T1), and at 4 weeks after treatment completion (T2) by therapists with over 5 years of clinical experience. Results: There were significant improvements between T0 and T1, and between T0 and T2, for all assessed items in the rTMS group. Whereas there were significant improvements between T0 and T1, and between T0 and T2, for the BBS and 10mWT in the control group. TUG (-4.87±5.05 vs. -0.50±2.97 seconds) and ABC score (8.10±8.33 vs. 0.16±0.97) were observed significant differences in comparison of the changes from T0 to T1 between the two group. BBS score (4.40±3.66 vs. 1.88±3.14), TUG (-4.87±4.56 vs. -0.62±2.96 seconds) and ABC score (8.22±7.70 vs. -0.09±0.86) differed significantly from T0 to T2 between the two groups. Conclusion Our findings suggest that low-frequency cerebellar rTMS is helpful for improving balance in patients with cerebral infarction, and maybe a beneficial treatment for these patients.