PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

Background: Chromosomal alterations serve as diagnostic and prognostic markers in acute leukemia. Given the evolving landscape of chromosomal abnormalities in acute leukemia, we previously studied these over two periods. In this study, we investigated the frequency of these abnormalities and clinical trends in acute leukemia in Korea across three time periods. Methods: We retrospectively analyzed data from 1,787 patients with acute leukemia (319 children and 1,468 adults) diagnosed between 2006 and 2020. Conventional cytogenetics, FISH, and multiplex quantitative PCR were used for analysis. The patient groups were divided according to the following three study periods: 2006–2009 (I), 2010–2015 (II), and 2016–2020 (III). Results: Chromosomal aberrations were detected in 92% of patients. The PML::RARA translocation was the most frequent. Over the 15-yr period, chromosomal aberrations showed minimal changes, with specific fusion transcripts being common among patients.ALL was more prevalent in children than in adults and correlated significantly with the ETV6::RUNX1 and RUNX1::RUNX1T1 aberrations. The incidence of ALL increased during the three periods, with PML::RARA remaining common. Conclusions The frequency of chromosomal abnormalities in acute leukemia has changed subtly over time. Notably, the age of onset of adult AML has continuously increased. Our results may help in establishing diagnoses and clinical treatment strategies and developing various molecular diagnostic platforms.

The study aimed to investigate the role of peripheral NLR family pyrin domain-containing 3 protein (NLRP3) in inflammatory pain development in the orofacial area. Male Sprague–Dawley rats were used in experiments, with orofacial formalin-induced pain behavior and complete Freund’s adjuvant (CFA)-induced thermal hyperalgesia as chronic inflammatory pain models. Administration of 5% formalin produced biphasic nociceptive behavior, and subcutaneous pretreatment with MCC950 (50 and 100 μg/50 μL), an NLRP3 inhibitor, remarkably attenuated nociceptive behavior during the second phase. Subcutaneous CFA injection induced thermal hyperalgesia 1 day after injection, which persisted for 7 days. Five days after CFA injection, subcutaneous treatment with MCC950 (50 and 100 μg/50 μL) significantly attenuated thermal hyperalgesia. Additionally, subcutaneous injection of BMS-986299 (50 and 100 μg/50 μL), an NLRP3 agonist, induced significant nociceptive behavior for 1 hour in naïve rats. Pretreatment with an interleukin-1β (IL-1β) receptor antagonist blocked the nociceptive behavior produced by subcutaneous injection of BMS-986299 (100 μg/50 μL);however, treatment with a hypoxia-inducible factor 1α inhibitor did not. These findings suggest the involvement of the peripheral NLRP3 and IL-1β pathway in chronic inflammatory pain development in the orofacial area, highlighting the potential of blocking this pathway as a strategy for developing future inflammatory pain treatment drugs.

Recent amendments to regulatory frameworks have placed a greater emphasis on the utilization of in vitro testing platforms for preclinical drug evaluations and toxicity assessments. This requires advanced tissue models capable of accurately replicating liver functions for drug efficacy and toxicity predictions. Liver organoids, derived from human cell sources, offer promise as a reliable platform for drug evaluation. However, there is a lack of standardized quality evaluation methods, which hinders their regulatory acceptance. This paper proposes comprehensive quality standards tailored for liver organoids, addressing cell source validation, organoid generation, and functional assessment. These guidelines aim to enhance reproducibility and accuracy in toxicity testing, thereby accelerating the adoption of organoids as a reliable alternative or complementary tool to animal testing in drug development. The quality standards include criteria for size, cellular composition, gene expression, and functional assays, thus ensuring a robust hepatotoxicity testing platform.

The diagnosis of common bile duct (CBD) stones is conducted through various imaging tests, endoscopic examinations, and the patient's clinical presentation. In patients with symptomatic gallstone disease, initial tests such as liver function tests, abdominal ultrasound, and abdominal computed tomography can be performed. Based on the results of these initial tests, symptomatic patient with cholelithiasis can be classified into low risk, intermediate risk, and high risk groups. Low risk of choledocholithiasis is characterized by normal liver function test results and absence of CBD dilation on abdominal ultrasound. For patients in this category, additional tests are not necessary unless symptoms indicating CBD stones persist. Intermediate risk of choledocholithiasis is identified by abnormal liver function test results or CBD dilation on abdominal ultrasound. Additional tests such as endoscopic ultrasound or magnetic resonance cholangiopancreatography can be performed. If CBD stones are confirmed in the additional tests, endoscopic retrograde cholangiopancreatography (ERCP) is required. High risk of choledocholithiasis is diagnosed when there is clinical evidence of cholangitis or CBD stones are identified on imaging tests. In such cases, ERCP is recommended for both diagnosis and treatment purposes without the need for further additional tests.

Purpose: DA-8010 is a novel muscarinic M3 receptor antagonist with significant selectivity for bladder over salivary gland in preclinical studies. We evaluated the clinical efficacy and safety of DA-8010 in overactive bladder (OAB) patients. Methods: This phase 2, randomized, double-blind, parallel-group, active reference- and placebo-controlled trial was conducted at 12 centers in South Korea (NCT03566134). Patients aged ≥19 years with OAB symptoms for ≥3 months were enrolled. Three hundred six patients (30.07% male) were randomized to 12 weeks of treatment among 4 groups; 2 experimental groups (DA-8010 2.5 or 5 mg), an active reference group (solifenacin 5 mg), and a placebo group. The change from the baseline of (=∆) 24-hour frequency at 12 weeks (primary endpoint), episodes of urgency, overall/urgency urinary incontinence, average/ maximum voided volume, nocturia, and patients’ subjective responses were analyzed. Results: In the full analysis set, the mean (standard deviation) [median] values for ∆ 24-hour frequency at 12 weeks were -1.01 (2.44) [-1.33] for placebo, -1.22 (2.05) [-1.33] for DA-8010 2.5 mg, and -1.67 (2.25) [-1.67] for DA-8010 5 mg; DA-8010 5 mg showed a significant decrease compared with placebo (P=0.0413). At 4 and 8 weeks, both DA-8010 2.5 mg (P=0.0391 at 4 weeks, P=0.0335 at 8 weeks) and DA-8010 5 mg (P=0.0001 at 4 weeks, P=0.0210 at 8 weeks) showed significant decrease in ∆ 24-hour frequency compared with placebo. DA-8010 5 mg achieved a significant decrease in ∆ number of urgency episodes, compared with placebo at 4 (P=0.0278) and 8 (P=0.0092) weeks. Adverse drug reactions (ADRs) were observed in 3.95% of placebo, 6.67% of DA-8010 2.5 mg, 18.42% of DA-8010 5 mg, and 17.33% of solifenacin 5 mg groups. No serious ADRs were observed in any patient. Conclusions Both DA-8010 2.5 mg and 5 mg showed therapeutic efficacy for OAB without serious ADRs. Therefore, both dosages of DA-8010 can advance to a subsequent large-scale phase 3 trial.