OBJECTIVES: Digitally collect data on the preparation space of the molar occlusal surface for full crown restoration and analyze the minimum preparation spaces and areas prone to insufficient preparation. METHODS: A total of 846 molars (excluding third molars) designated for repair with zirconium dioxide crowns were selected. All molars were prepared by using the fixed-depth groove method under visual guidance. A digital impression was collected, and the occlusal surface of the preparation was divided into regions: mesiobuccal area, mesiolingual area, distobuccal area, distolingual area, mesial marginal ridge, and distal marginal ridge. Image measurement software (3Shape Unite) was employed to record the smallest preparation space on the molar occlusal surface, and a space of <1 mm was defined as insufficient preparation. The chi-square test was utilized for the statistical analysis of data. RESULTS: Significant differences were observed in the areas with the smallest preparation space on the occlusal surface of molars across different quadrants (P<0.05). Notably, the area with the smallest preparation space on the occlusal surface of the maxillary first molar was most frequently found in the mesiobuccal area, whereas the smallest preparation spaces on other molars were predominantly located in the distolingual area. The insufficient preparation of the occlusal surface occurred in 41.0% (347 cases) of teeth. The distribution of prone areas corresponded with the distribution of the smallest spatial areas. CONCLUSIONS Although the fixed-depth groove method is employed, the preparation space on the molar surface unavoidably remains uneven under visual guidance. The identification of the areas prone to minimum preparation spaces can serve as a valuable guide for clinicians to prevent insufficient preparation.
Humans ; Molar/anatomy & histology* ; Crowns ; Zirconium

OBJECTIVEThis research aimed to analyze the three-dimensional position of mandibular canal (MC) and man of MC and its relationship with the surrounding structures dibular morphology of normal young males and females by using data from cone beam computed tomography (CBCT), as well as to provide an anatomical basis for clinical surgery of the mandible.

METHODSNormal occlusion and CBCT scans of 29 normal young people were conducted. InVivo 5 software was used to reconstruct the mandible, anchor the points, and measure the jaw shape and three-dimensional course of MC. All measurements were analyzed with SSPS 17.0 software.

RESULTSThe MC lingual bone cortex was thinner than the MC buccal bone cortex, and the distance of the MC to the buccal bone cortex gradually increased. However, the distance of the MC to the tongue bone cortex and alveolar crest gradually decreased from proximal to distal. In addition, the distance of the MC to the mandibular lower margin was minimal at the first molar and reached the maximum at the second premolar. No significant difference was observed among the heights, widths, and thicknesses of the left and right sides of the cortical bone of the mandibular body cross sections. From the midline to the farthest point, the height and lower one-third thickness of the lingual cortical bone of the mandibular body cross sections gradually decreased, whereas the width of the upper cross section and upper one-third thickness of the buccal cortical bone gradually increased. Significant difference was observed in some measured values.

CONCLUSIONAfter MC enter into the mandibular foramen, it moved away from the lingual to the buccal bone but gradually returned to the lingual bone; its general course is closer to the lingual bone. The mandibles of males are thicker than those of females. CBCT can accurately display the course of MC and its relationship with the surrounding structures.

Alveolar Process ; Bicuspid ; Cone-Beam Computed Tomography ; methods ; Dental Pulp Cavity ; Female ; Humans ; Hyoid Bone ; Male ; Mandible ; anatomy & histology ; diagnostic imaging ; Molar ; Software ; Surveys and Questionnaires ; Tongue ; Zygoma

Continuously growing incisors are common to all rodents, which include the Microtus genus of voles. However, unlike many rodents, voles also possess continuously growing molars. Here, we report spontaneous molar defects in a population of Prairie voles (Microtus ochrogaster). We identified bilateral protuberances on the ventral surface of the mandible in several voles in our colony. In some cases, the protuberances broke through the cortical bone. The mandibular molars became exposed and infected, and the maxillary molars entered the cranial vault. Visualisation upon soft tissue removal and microcomputed tomography (microCT) analyses confirmed that the protuberances were caused by the overgrowth of the apical ends of the molar teeth. We speculate that the unrestricted growth of the molars was due to the misregulation of the molar dental stem cell niche. Further study of this molar phenotype may yield additional insight into stem cell regulation and the evolution and development of continuously growing teeth.
Animals ; Arvicolinae ; anatomy & histology ; genetics ; Female ; Humans ; Male ; Molar ; diagnostic imaging ; growth & development ; Pedigree ; X-Ray Microtomography

OBJECTIVE: to explore the relationship between the maxillary sinus volume and the amount of alveolar bone, and the effect of molar loss upon the maxillary sinus was further analyzed,by measuring adult maxillary sinus volume, sinus ridge distance, and calculating the gasification coefficient of maxillary sinus. METHOD: One hundred and ninety cases (361 maxillary sinus) with CT examinations were collected, they were divided into group A and group B, 121 cases (242 maxillary sinus) of normal subjects served as group A, 42 cases (65 maxillary sinus) with molar part off were B group, in which 31 maxillary sinus with a molar loss were group B1,22 maxillary sinus with two molar loss were B2 group,12 maxillary sinus with three molar loss (one molar remains) were B3 group, 27 cases (54 maxillary sinus) with upper teeth off were C group. Bymeasureing the maxillary sinus volume, sinus ridge distance and the size of the maxillary sinus, calculating the gasification coefficient, we analyzed the relationship between maxillary volume and sinus ridge distance, and comparatively analyzed the differences among the three groups in the size, gasification coefficient, volume of maxillary sinus and sinus ridge distance. RESULT: In the normal group,the volume of maxillary sinus and sinus ridge distance had a correlation coefficient of -0. 63,(P< 0.05); Sinus ridge distance in group A was larger than the other two groups (P<0.05), and larger in B group than in C group (P<0. 05), anteroposterior maxillary sinus diameter and reft-right diameter in C group was greater than in A group and B group(P<0.05), group C gasification coeffiecent was less than A group and B group (P<0. 05). CONCLUSION The volume of maxillary sinus is negatively correlated with the amont of alveolar bone; Upper teeth's shedding promotes maxillary sinus deformation; Maxiuary sinus volume has a tendency to decrease.
Adult ; Humans ; Maxilla ; Maxillary Sinus ; anatomy & histology ; diagnostic imaging ; Molar ; Radiography ; Tooth Loss

OBJECTIVETo measure the effect of laser fluence and scanning velocity on ablation efficiency of enamel and dentin.

METHODSTwo extracted human incisors and two molars were cut transversely along the axial plane with a diamond saw to obtain dentin and enamel slices with thickness of about 1 mm. Samples were fixed on a motorized translation stage, the linear reciprocating movement in the plane perpendicular to the direction of laser incident was programmed by the controller, and the laser focused on the tooth surface, then 36 ablation lines on enamel and 48 ablation lines on dentin were produced. A femtosecond laser system with wavelength of 800 nm, pulse width 30 fs, repetition frequency 1000 Hz was used, and the diameter of the focused spot was approximately 25 µm. A group of different fluence (1.33, 1.77, 2.21, 4.42, 8.85, 17.69 J/cm(2) for enamel and 0.44, 0.66, 0.88, 1.33, 1.77, 2.21, 4.42, 6.63 J/cm(2) for dentin) and two scanning velocity (10 mm/s and 20 mm/s) were tested. Confocal laser scanning microscope was used to measure the ablation volume.Ablation efficiency for enamel and dentin was then calculated.

RESULTSUnder the fluence of 8.85 J/cm(2) there was the highest ablation efficiency for enamel, 18.703×10(-3) mm(3)/J (20 mm/s), and the highest ablation efficiency for dentin was found under the fluence of 2.21 J/cm(2), ie.223.458×10(-3) mm(3)/J (20 mm/s).

CONCLUSIONSFluence and scanning speed of this femtosecond laser can affect ablation efficiency for both enamel and dentin, and this suggests that with appropriate choice of fluence and scanning speed we can improve the ablation efficiency for enamel and dentin.

Dental Enamel ; radiation effects ; Dentin ; radiation effects ; Humans ; Incisor ; anatomy & histology ; Lasers ; Molar ; anatomy & histology

INTRODUCTIONAccurate localisation of the greater palatine foramen (GPF) is imperative while negotiating the greater palatine canal for blocking the maxillary nerve within the pterygopalatine fossa. The aim of this study was to define the position of the foramen relative to readily identifiable intraoral reference points in order to help clinicians judge the position of the GPF in a consistently reliable manner.

METHODSThe GPF was studied in 100 dried, adult, unsexed skulls from the state of Maharashtra in western India. Measurements were made using a vernier caliper.

RESULTSThe mean distances of the GPF from the midline maxillary suture, incisive fossa, posterior palatal border and pterygoid hamulus were 14.49 mm, 35.50 mm, 3.40 mm and 11.78 mm, respectively. The foramen was opposite the third maxillary molar in 73.38% of skulls, and the direction in which the foramen opened into the oral cavity was found to be most frequently anteromedial (49.49%). In one skull, the greater and lesser palatine foramina were bilaterally absent. Except for the invariably present incisive canals, there were no accessory palatal foramina, which might have permitted passage of the greater palatine neurovascular bundle in lieu of the absent GPF. To the best of our knowledge, this is the first study of such a non-syndromic presentation.

CONCLUSIONThe GPF is most frequently palatal to the third maxillary molar. For an edentulous patient, the foramen may be located 14-15 mm from the mid-palatal raphe or about 12 mm anterior to the palpable pterygoid hamulus.

Anesthesia ; methods ; Cadaver ; Humans ; India ; Maxilla ; anatomy & histology ; innervation ; Maxillary Nerve ; pathology ; Molar ; anatomy & histology ; Palate, Hard ; abnormalities ; anatomy & histology ; innervation ; Reference Values ; Skull ; anatomy & histology

Modern photo-mechanics testing techniques are widely used in industrial circles and academic circles. In order to solve the problem of biomedical engineering, shadow moiré method is used in oral and dental area in our study. A molar tooth was tested by phase shift shadow moiré method. Through testing molar tooth, the results show that shadow moiré method could be used for measuring the appearance of the oral area and concave and convex parts of molar tooth could also be distinguished and shown by interference patterns. The characteristics of shadow moirh are that it does't need exerting load on the specimen and could realize non-contact measurement.
Cephalometry ; methods ; Humans ; Moire Topography ; instrumentation ; statistics & numerical data ; Molar ; anatomy & histology ; Photography

The aims of the study were to investigate the incidence of C-shaped root canal systems in mandibular second molars in a native Chinese population using radiography and clinical examination under microscope and to compare the relative efficacies of these methods. For the recognition of C-shaped root canal system, 1 146 mandibular second molars were selected and examined. Teeth with C-shaped canal systems were categorized by using the radiographic classification criteria and the modified Melton's method. C-shaped canals were identified in 397 (34.64%) mandibular second molars by radiography (type I, 31.23%; type II, 38.29%; type III, 30.48%). Clinical examination showed that 449 (39.18%) cases exhibited C-shaped canal systems (C1, 22.94%; C2, 48.11%; C3a, 15.59%; C3b, 13.36%). As for the result of the radiographic and clinical combined examination, C-shaped root canals were found in 473 (41.27%) mandibular second molars (C1, 21.78%; C2, 45.67%; C3a, 16.70%; C3b, 15.86%). The incidence of C-shaped root canal diagnosed by radiographic method was statistically different from that by clinical examination and the combined examination (P<0.05). The study indicated a high incidence of C-shaped canal system in a Chinese population. The combination of microscopic and radiographic examination is an effective method in identifying the C-shaped root canal system.
Adult ; Aged ; Anatomic Variation ; Asian Continental Ancestry Group ; Chi-Square Distribution ; China ; Dental Pulp Cavity ; anatomy & histology ; diagnostic imaging ; Female ; Humans ; Male ; Mandible ; Microscopy ; Middle Aged ; Molar ; anatomy & histology ; Radiography, Dental ; Tooth Root ; anatomy & histology ; Young Adult

OBJECTIVETo investigate the anatomic features of the root apexes of permanent three-rooted mandibular first molars.

METHODSA total of 122 permanent mandibular first molars of Han Chinese patients were collected. Twenty three-rooted and 25 two-rooted molars were scanned by micro-CT and then reconstructed three-dimensionally. The apical anatomy of the tooth models were analyzed in software Mimics 10.01. The long and short diameters of the apical constriction (AC), the distances between AC, apical foramen (AF) and apex were measured. One-way ANOVA and LSD-t tests were used to compare the groups in relation to AC diameter and the distances between the AC, AF and apex.

RESULTSThe AF of the mesiobuccal (MB) canals most frequently presented at the distal side of the apex (10 cases in three-rooted and 6 cases in two-rooted group), and of the mesiolingual (ML) canals, most often at the lingual side (8 cases in each group). The AF of the distobuccal (DB) roots were frequently located at the distolingual (DL) side (10 cases), and those of the DL roots and distal canals of two-rooted molars were most often at the buccal (7 cases) and distal (11 cases) sides, respectively. The percentage of the "classical" singular AC was 53% (80/151). The average long(D) and short(d) diameters of the AC of the DB canals were (0.32 ± 0.09) mm and (0.25 ± 0.05) mm, respectively, significantly larger than the DL canals [D = (0.27 ± 0.08) mm, d = (0.22 ± 0.06) mm, P < 0.05] and the ML canals [D = (0.24 ± 0.06) mm, d = (0.19 ± 0.06) mm, P < 0.01). In three-rooted group, the mean distances between AC and AF, AF and apex, and AC and apex were (0.67 ± 0.32), (0.49 ± 0.28) and (1.01 ± 0.34) mm, respectively.

CONCLUSIONSThe AF of three-rooted mandibular molars frequently deviate from the root apex, and the AC of the DB canal is wider than those of the other canals. The mean distances between AC, AF and the apex suggest that root canal therapy should terminate at 1 to 1.5 mm short of the radiographic apex.

Asian Continental Ancestry Group ; Humans ; Imaging, Three-Dimensional ; Molar ; anatomy & histology ; diagnostic imaging ; Tooth Apex ; anatomy & histology ; diagnostic imaging ; Tooth Root ; anatomy & histology ; diagnostic imaging ; X-Ray Microtomography ; methods

Dental Pulp Cavity ; anatomy & histology ; Humans ; Male ; Maxilla ; Middle Aged ; Molar ; anatomy & histology ; Odontometry ; Tooth Root ; anatomy & histology