INTRODUCTION: Antimicrobial resistance (AMR) poses a critical global health threat, with millions of deaths attributed to it annually. Antibiotic stewardship to combat AMR is the responsibility of all healthcare professionals. Despite evidence suggesting that it is unnecessary, dentists routinely prescribe prophylactic antibiotics following third molar (3M) surgeries. METHOD: This mixed-methods study examined the behavioural barriers influencing antibiotic prescribing practices within the Division of Oral and Maxillofacial Surgery at the National University Centre for Oral Health Singapore. This study used the capability, opportunity and motivation for behavioural change or COM-B framework to implement interventions targeting the behavioural barriers. RESULTS: Pre- and post-intervention data over 6 months showed a significant reduction in antibiotic prescriptions from 84.45% to 20.89%, following the implementation of COM-B strategies (P<0.001). Qualitative feedback from focus group discussions highlighted a positive shift in clinicians' attitudes towards antibiotic reduction, acknowledging the minimal infection risk associated with non-prescribing practices. Notably, complication rates remained stable throughout the study period, indicating no adverse effects from reduced antibiotic usage. CONCLUSION These findings demonstrated that the COM-B model can be successfully applied to modify deeply ingrained prescription habits, and underscored the effectiveness of a structured behavioural change intervention in enhancing compliance with antibiotic stewardship guidelines. The study advocates continuation of initiatives to sustain this positive trend and mitigate AMR in clinical practice.
Humans ; Molar, Third/surgery* ; Anti-Bacterial Agents/therapeutic use* ; Singapore ; Antimicrobial Stewardship/methods* ; Practice Patterns, Dentists'/statistics & numerical data* ; Antibiotic Prophylaxis ; Female ; Attitude of Health Personnel ; Male ; Tooth Extraction ; Adult ; Focus Groups ; Practice Patterns, Physicians'

OBJECTIVE: To evaluate the clinical and radiographic efficacy of micro crestal flap-alveolar ridge preservation following extraction of mandibular molars with severe periodontitis compared with natural healing, and to preliminarily propose the surgical indication. METHODS: A retrospective analysis was conducted on clinical data from patients with mandibular molars with severe periodontitis either receiving micro crestal flap-alveolar ridge preservation (MCF-ARP group) or undergoing natural healing in department of periodontology, Peking University School and Hospital of Stomatology from September 2013 to June 2021. Cone-beam computed tomography scannings performed before/immediately after extraction (as baseline) and repeated before implantation (after the extraction socket healing) were used to measure the ridge width, height and volumetric changes of the sockets, and the proportion of guided bone regeneration (GBR) during implant therapy were compared between the two groups. RESULTS: Between baseline and healing, significant differences in changes of MCF-ARP group [(8.34±2.81) mm] and natural healing group [(3.82±3.58) mm] in the distances from mandibular canal to center of the tooth socket were recorded (P < 0.001). The ridge width at 1 mm below the most coronal aspect of the crest increased by (3.50±4.88) mm in the MCF-ARP group but decreased by (0.16±5.70) mm in the natural healing group, respectively (P=0.019). After healing, the MCF-ARP group showed the distances from mandibular canal to center of the tooth socket >8 mm in all the cases, with 97.1% exceeding 10 mm. Natural healing group displayed 23.1% of the cases with center bone height < 8 mm and 61.5% exceeding 10 mm. Volume changes at the buccal and lingual aspect as well as the total socket were significantly greater in the MCF-ARP group compared with natural healing group (P < 0.001).At the time of implantation, GBR was performed in 5 out of 68 subjects (8.3%) in the MCF-ARP group, whereas 8 out of 26 subjects (30.8%) in the natural healing group required GBR, reflecting significant difference (P=0.003). CONCLUSION In the sites of mandibular molars with severe periodontitis, when the distances from mandibular canal to center of the tooth socket was not enough (less than 7 mm), clinicians could consider performing the micro crestal flap-alveolar ridge preservation to achieve augmentation for alveolar ridge and reduce the proportion of guided bone regeneration during implant therapy to reduce the difficulty and risk of injuries during implant therapy.
Humans ; Tooth Extraction ; Retrospective Studies ; Surgical Flaps ; Molar/surgery* ; Mandible/surgery* ; Female ; Periodontitis/surgery* ; Male ; Adult ; Middle Aged ; Cone-Beam Computed Tomography ; Alveolar Ridge Augmentation/methods* ; Alveolar Process/surgery* ; Tooth Socket/diagnostic imaging* ; Dental Implantation, Endosseous/methods*

OBJECTIVE: To compare the influence of different emergence profile of implants in mandibular molar on the peri-implant soft tissue. METHODS: Forty-four implants were divided into two equal groups by mucosal thickness, ≥2 mm (group A) or < 2 mm (group B), and were randomly included in the test group and the control group. In the control group, the patients were treated by a prosthesis with no transmucosal modifications (subgroups A1 and B1). In groups A1 and B1, the prostheses maintained the original emergence profile of the healing abutment. In the test group, the prostheses were designed based on a width-to-height ratio (W/H) of 1.3 ∶ 1 (subgroups A2 and B2). In group A2, the buccal transmucosal configuration design was slightly concave, and in group B2, the prostheses were designed with convex buccal transmucosal configuration. Assessments were made before delivery of the definitive restoration (T0), one month (T1) and 12 months (T2) after loading. The soft tissue and prosthesis information were obtained by intraoral scan and were converted to digital models. The digital models of different time were superimposed together. Buccal mucosal W/H, emergence angle (EA) and buccal mucosal margin recession (ΔGM) were measured. RESULTS: One year after loading, the buccal mucosal margin recession in the test group (groups A2 and B2) was significantly lower than that in the control group (groups A1 and B1). The ΔGM in group A2 was significantly lower than that in group A1 (P=0.033), but in groups B1 and B2, it was not significantly different. The W/H in group A2 increased significantly one month after loading, but remained stable at one year. In the A1 group, the W/H changed little from initial to one month, but increased significantly at one year after loading. The W/H in group B2 remained stable from the beginning to one year, while in group B1, it changed little one month after loading, but increased significantly by one year. CONCLUSION When the initial mucosal thickness was ≥2 mm, the slightly concave prosthesis designed based on the biological W/H significantly maintained the level of buccal mucosa. When the mucosal thickness was < 2 mm, the slightly convex prosthesis design maintained a more stable W/H over one year.
Humans ; Mandible/surgery* ; Molar/surgery* ; Male ; Female ; Adult ; Middle Aged ; Dental Prosthesis Design ; Dental Implants ; Dental Implantation, Endosseous/methods*

OBJECTIVE: To investigate the clinical application effect of the along-axis extraction method in the extraction of impacted mandibular third molars (IMTM) and to compare the biomechanical characteristics of different root extraction techniques through three-dimensional finite element analysis. METHODS: A total of 68 patients requiring IMTM extraction were enrolled and randomly divided into two groups: the experimental group underwent the along-axis extraction method, while the control group underwent the traditional buccal bone removal and root extraction method. The duration of the procedure, intraoperative and postoperative complications were recorded. Three-dimensional finite element analysis further revealed the stress distribution in the tooth root, jawbone, periodontal ligament, and mandibular canal during different root extraction methods. RESULTS: The duration of root extraction, pain score and swelling on the first postoperative day in the control group were (7.87±3.90) min, 4.62±1.90 and (11.37±5.12) mm, respectively, which were significantly higher than those in the experimental group [(5.74±2.37) min, 3.87±1.19 and (7.22±3.39) mm, respectively]. The root fracture rate and lingual bone plate fracture rate in the control group were significantly higher than those in the experimental group (P < 0.05). The results of finite element analysis showed that the control group ' s lingual al-veolar bone had the higher peak equivalent stress, and lingual bone plate fracture was prone to occur. The periodontal ligament of the experimental group had the higher equivalent stress value, making it more likely to rip and more likely to cause root displacement. When subjected to force, the experimental group' s instantaneous root displacement was higher, but the control group ' s root displacement was more pronounced in the lingual direction. CONCLUSION This study suggests that the along-axis extraction me-thod can not only effectively shorten the operative time but also reduce postoperative complications after extraction of impacted mandibular third molars, and enhance the safety of the operation and the patient' s comfort. Three-dimensional finite element analysis shows the biomechanical characteristics of various root extraction techniques visually, serves as a valuable guide for choosing and refining clinical surgical techniques, and confirms that extracting a tooth' s root along its long axis yields better clinical results.
Humans ; Finite Element Analysis ; Tooth, Impacted/surgery* ; Tooth Extraction/methods* ; Molar, Third/surgery* ; Mandible/surgery* ; Imaging, Three-Dimensional ; Female ; Adult ; Biomechanical Phenomena ; Male ; Tooth Root/surgery* ; Young Adult ; Adolescent

OBJECTIVE: To explore the effects of two methods of smear layer removal on the surface properties of dentin. METHODS: Sixty extracted sound third molars were collected in this study, and were prepared as uniform dentin specimens with smear layer. All specimens were randomly divided into three groups: Control group, ultrasonic treatment (UT) group and etched treatment (ET) group. Scanning electron microscope (SEM) were used to observe the surface micromorphology of all three groups. Then, the surface elements, mineral phases and functional groups were analyzed by energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and flourier transformed infrared spectrometer (FTIR) respectively. The mechanical properties, hydrophilicity and biocompatibility were also further evaluated. RESULTS: It was revealed that dentin tubules of UT and ET groups were exposed, but lots of dentin debris piled up on the surface of the control one which covered up dentin tubules on the surface. The EDX results should that the weaker peak value of calcium and phosphorus in ET group than control and UT groups. Characteristic peaks of hydroxyapatite could be seen by XRD in all of the three groups, but lower distinctive peaks of amide Ⅰ, Ⅱ and Ⅲ bands of collagen of the dentin surface in control group than in ET and UT groups. The microhardness results showed that ET group was lower than control and UT groups, the difference was significant (P < 0.05). Better hydrophilicity of ET group was investigated (P < 0.05) than control group and UT group. Cells could be observed to adhere normally to dentin surface of each group which meant that all of the three groups had good biocompatibility. CONCLUSION Both UT and ET could effectively remove the smear layer on the surface of dentin and had no adverse effect of the dentin micromorphology and biocompatibility. The ultrasonic removal of the smear layer did not influence the mineral structure, hydrophilicity and mechanical properties of dentin surface. Although ET can effectively improve the hydrophilicity of dentin but decreased mechanical properties and the content of calcium and phosphorus.
Dentin/ultrastructure* ; Humans ; Surface Properties ; Smear Layer ; Molar, Third ; Microscopy, Electron, Scanning ; Dental Etching/methods*

Primary cilia function as critical sensory organelles that mediate multiple signaling pathways, including the Hedgehog (Hh) pathway, which is essential for organ patterning and morphogenesis. Disruptions in Hh signaling have been implicated in supernumerary tooth formation and molar fusion in mutant mice. Cilk1, a highly conserved serine/threonine-protein kinase localized within primary cilia, plays a critical role in ciliary transport. Loss of Cilk1 results in severe ciliopathy phenotypes, including polydactyly, edema, and cleft palate. However, the role of Cilk1 in tooth development remains unexplored. In this study, we investigated the role of Cilk1 in tooth development. Cilk1 was found to be expressed in both the epithelial and mesenchymal compartments of developing molars. Cilk1 deficiency resulted in altered ciliary dynamics, characterized by reduced frequency and increased length, accompanied by downregulation of Hh target genes, such as Ptch1 and Sostdc1, leading to the formation of diastemal supernumerary teeth. Furthermore, in Cilk1^-/-;PCS1-MRCS1^△/△ mice, which exhibit a compounded suppression of Hh signaling, we uncovered a novel phenomenon: diastemal supernumerary teeth can be larger than first molars. Based on these findings, we propose a progressive model linking Hh signaling levels to sequential changes in tooth patterning: initially inducing diastemal supernumerary teeth, then enlarging them, and ultimately leading to molar fusion. This study reveals a previously unrecognized role of Cilk1 in controlling tooth morphology via Hh signaling and highlights how Hh signaling levels shape tooth patterning in a gradient-dependent manner.
Animals ; Hedgehog Proteins/physiology* ; Mice ; Signal Transduction/physiology* ; Tooth, Supernumerary ; Molar ; Cilia/physiology* ; Odontogenesis/physiology* ; Patched-1 Receptor ; Protein Serine-Threonine Kinases/physiology* ; Mice, Knockout ; Adaptor Proteins, Signal Transducing

OBJECTIVES: The objective of this study is to measuring the morphology and position of bilateral temporomandibular joints in patients with unilateral and bilateral molar scissor bite and simulating the deformation of the mandible during occlusion, in order to provide thesis for the diagnosis of temporomandibular joint disease in patients with unilateral and bilateral molar scissor bite. METHODS: This study was a retrospective study. A total of 10 patients with unilateral molar scissor bite (the unilateral molar scissor bite group) and 10 patients with bilateral molar scissor bite (the bilateral molar scissor bite group) were selected as the experimental group, and 20 adult patients with classⅠ of angle classification of similar ages were selected as the control group. All patients underwent cone beam computed tomography scans, by measuring the width of the fossa, height of the fossa, articular eminence inclination, long axis of the condyle, minor axis of the condyle, horizontal angle of the condyle and the space of the temporomandibular joint, compare temporomandibular joint morphology and position. The three-dimensional finite element analysis of the mandible morphology was carried out to evaluate the force and deformation of the mandible by using software to simulate the occlusion of the patients. It was further explored the relationship between the force of the mandible morphology and the possible temporomandibular joint disorder symptoms of the patients. RESULTS: Intergroup comparisons for the unilateral molar scissor bite group and left sides of the other groups revealed that the superior articular space in the group with unilateral molar scissor bite was shorter than that in the control group (P<0.05); the long axis of the condyle in the unilateral and bilateral molar scissor bite group were both shorter than that of the control group (P<0.05); among which the unilateral group was larger than the bilateral group, and the minor axis of the condyle in bilateral molar scissor bite group was smaller than in the control group (P<0.05), and the unilateral and bilateral condylar groups were larger than the control group (P<0.05); and the condylar horizontal angle in the unilateral and bilateral groups were larger than that in the control group (P<0.05). The normal sides of the unilateral molar scissor bite group and right sides of the other groups had smaller superior articular space than the control group (P<0.05); and the condylar long-axis in bilateral group was smaller than the control group (P<0.05); and the normal side of the condylar short-axis unilateral group was larger than that of the bilateral condylar group. Three-dimensional finite element analysis: the condyle of patients with molar scissor bite was a concentrated area of deformation during the bite of the mandible, when the first molar occlusion of the scissors bite side was simulated, the maximum deformation was located in the condyle in the X-axis and Z-axis directions. The amount of deformation was greater than that of the scissor bite side in the X-axis direction, while in the Z-axis direction, the normal side was greater than the scissor bite side. The maximum sites of local deformation in the X-axis direction were located in anterior and posterior the transverse crest of scissor bite side, and the minimum sites of local deformation was at 1/3 of the anterior slope of the inner pole of the normal side, the maximum local deformation sites in the Z-axis direction were located in the outer pole and below the outer pole of the normal side. The X-axis deformation value was the largest in the molars occlusion on the normal side, the Y-axis deformation value was in the premolars occlusion on the normal side, and the Z-axis deformation value was the largest in the centric occlusion, the deformation value of the condyle was not most significant in molar scissor bite. CONCLUSIONS Unilateral and bilateral molar scissor bite resulting in a short condyle morphology, and the bilateral group had a shorter condylar morphology than the unilateral group. The condyle of the patient with molar scissor bite is a concentrated area of poor occlusal deformation, and the largest sites of deformation are distributed near the transverse ridge of the inner and outer poles of the condyle. Different occlusion conditions have an effect on condylar deformation values, but do not indicate whether there is a clear association between them.
Humans ; Finite Element Analysis ; Retrospective Studies ; Temporomandibular Joint/pathology* ; Cone-Beam Computed Tomography ; Mandible/pathology* ; Imaging, Three-Dimensional ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Mandibular Condyle/diagnostic imaging* ; Female ; Male ; Molar

OBJECTIVES: Digitally collect data on the preparation space of the molar occlusal surface for full crown restoration and analyze the minimum preparation spaces and areas prone to insufficient preparation. METHODS: A total of 846 molars (excluding third molars) designated for repair with zirconium dioxide crowns were selected. All molars were prepared by using the fixed-depth groove method under visual guidance. A digital impression was collected, and the occlusal surface of the preparation was divided into regions: mesiobuccal area, mesiolingual area, distobuccal area, distolingual area, mesial marginal ridge, and distal marginal ridge. Image measurement software (3Shape Unite) was employed to record the smallest preparation space on the molar occlusal surface, and a space of <1 mm was defined as insufficient preparation. The chi-square test was utilized for the statistical analysis of data. RESULTS: Significant differences were observed in the areas with the smallest preparation space on the occlusal surface of molars across different quadrants (P<0.05). Notably, the area with the smallest preparation space on the occlusal surface of the maxillary first molar was most frequently found in the mesiobuccal area, whereas the smallest preparation spaces on other molars were predominantly located in the distolingual area. The insufficient preparation of the occlusal surface occurred in 41.0% (347 cases) of teeth. The distribution of prone areas corresponded with the distribution of the smallest spatial areas. CONCLUSIONS Although the fixed-depth groove method is employed, the preparation space on the molar surface unavoidably remains uneven under visual guidance. The identification of the areas prone to minimum preparation spaces can serve as a valuable guide for clinicians to prevent insufficient preparation.
Humans ; Molar/anatomy & histology* ; Crowns ; Zirconium

OBJECTIVES: To assess the effectiveness of the comparison between pit and fissure sealants and fluoride varnishes, as well as various types of sealants, in preventing caries on the occlusal surface of children's first permanent molars (FPM). METHODS: Conduct a comprehensive search of literature published between January 1, 1988, and May 30, 2024, in the following databases: China National Knowledge Infrastructure, Web of Science, Cochrane Library, Embase, PubMed, China Science Periodical Database and China Biology Medicine database. Meta-analysis and subgroup analyses were performed on the literature that met the inclusion criteria. RESULTS: A total of 5 618 pieces of literature were retrieved, resulting in the inclusion of 14 in the study. Meta-analysis showed that there was no statistically significant difference in the efficacy between varies pit and fissure sealants compared to fluoride varnishes, and between varies types of sealants in preventing caries on the occlusal surface of children's first permanent molars within 24 months post-surgery (P>0.05). CONCLUSIONS Within 24 months, there was no significant difference in the effectiveness of using resin-based or glass iomomer pit and fissure sealants compared with fluoride varnishes in preventing occlusal caries in FPM in children; within 24 months, there was no significant difference in the effectiveness of using resin-based sealants compared with ART sealants in preventing occlusal caries in FPM in children. ART sealants are recommended over resin-based sealers for children who have no conditions for chair-side manipulation or who are poorly co-operative.
Humans ; Pit and Fissure Sealants/therapeutic use* ; Dental Caries/prevention & control* ; Molar ; Child ; Fluorides, Topical/therapeutic use* ; Dentition, Permanent

Fused teeth are usually formed by the partial or complete fusion of two normal tooth germs during the development process and belong to dental developmental abnormalities. Fused teeth are relatively rare clinically, and those occurring in the posterior tooth area are even rarer. This article reports a case of fused teeth between the first permanent molar and the second permanent molar in the right mandible. This fused tooth had a complex root canal anatomical structure (seven root canals). The number and location of the root canals were analyzed by cone beam computed tomography, and root canal treatment was successfully completed with the assistance of microscope.
Humans ; Molar/diagnostic imaging* ; Mandible ; Dental Pulp Cavity/abnormalities* ; Cone-Beam Computed Tomography ; Root Canal Therapy/methods* ; Fused Teeth/surgery*