OBJECTIVE To investigate the effect and mechanism of gracillin from Reineckia carnea on autophagy in non- small cell lung cancer A549 cells. METHODS Using A549 cells as subjects， the effects of different concentrations of gracillin （0.25， 0.5， 1， 2， 4 μmol/L） on the proliferation of cells were detected by CCK-8 after being treated for different time （12， 24， 48 h）. Compared with the control group without medication， the effect of gracillin （2 μmol/L） on the formation of autophagosomes in cells was observed by transmission electron microscope after 24 h of exposure. The aggregation of GFP-LC3 on autophagosome membrane was detected by GFP-LC3 plasmid transfection after being treated with gracillin （0.25， 0.5， 1， 2 μmol/L） for 24 h. Quantitative real-time PCR and Western blot assay were used to detect the mRNA and protein expressions of family with sequence similarity 102 member A（FAM102A）， the expressions of autophagy-related proteins [p62， Beclin-1， microtubule-associated protein 1 light chain 3B （LC3B）]， and the expressions of phosphoinositide 3-kinase （PI3K）/protein kinase B （Akt） signaling pathway-related proteins in A549 cells after being treated with gracillin （0.25， 0.5， 1 and 2 μmol/L） for 24 h. RESULTS Gracillin significantly inhibited the proliferation of A549 cells in a concentration- and time-dependent manner. The IC50 was 2.55 μmol/L at 24 h. After 24 h of gracillin treatment， autophagosomes with bilayer membrane structure were found in the cell cytoplasm， and GFP-LC3 green fluorescent spots on autophagosome membrane were obvious， representing an increasing trend as drug concentration. Compared with the control group， mRNA and protein expressions of FAM102A （0.5， 1， 2 μmol/L groups）， protein expression of Beclin-1 （1， 2 μmol/L groups） and LC3B-Ⅱ/LC3B-Ⅰ ratio （2 μmol/L group） were significantly increased in different concentrations of gracillin groups， while the protein expression of p62 （1， 2 μmol/L groups）， and the protein phosphorylations of Akt （1， 2 μmol/L groups） and PI3K （2 μmol/L group） were all decreased significantly （P＜0.05 or P＜0.01）. CONCLUSIONS Gracillin can promote excessive autophagy in A549 cells by up-regulating mRNA and protein expressions of FAM102A and inhibiting PI3K/Akt signaling pathway， thus inhibiting cell proliferation.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

Objective:To establish a predictive model of the first cesarean delivery in multiparous women based on the situation of two consecutive pregnancies.Methods:The data of patients with two consecutive deliv-eries of single live birth and the previous delivery was vaginal delivery in the First Affiliated Hospital of Soochow U-niversity during the second delivery time range from January 1,2018 to December 31,2021 were retrospectively analyzed.According to whether the second pregnancy occurred cesarean section,the patients were divided into two groups(vaginal delivery group and cesarean section group).Univariate,stepwise,and multiple Logistic re-gression analyses were used to screen the influencing factors of multipara's first cesarean section delivery,and the prediction model was established.R language was used to build the model's nomogram and calibration curve.The bootstrap resampling method was used for internal verification.After establishing the model,clinical data of patients with two consecutive births of single live birth between January 1,2022 and April 1,2023 were retrospec-tively collected for external verification of the model.Results:①A total of 2709 patients were included in this study for modeling,of which 6.31％(171/2709)underwent cesarean section for the first time.603 cases were included for external verification.②According to univariate,stepwise and multivariate Logistic regression analysis,all the variables affecting the first delivery by cesarean section were screened out,including:abnormal labor in previous labor,age of current delivery,assisted reproductive technology,hypertension disorder complicating pregnancy,pregnancy with thrombocytopenia,oligohydramnios,excessive amniotic fluid,macrosomia,fetal growth restriction,abnormal fetal position,fetal distress,all of the above variables P＜0.05 and incorporated into the final prediction model.③The AUC of this model was 0.949(95％CI 0.928-0.969),and the calibration curve showed that the model intercept was 0 and the slope was 1.Hosmer-Lemeshow test had a P＞0.05,indicating that the model had a high accuracy.④The AUC of external validation was 0.958,the slope of the calibration curve was 0.972,and the Hosmer-Lemeshow test had a P of 0.49.Conclusions:The prediction model of the first delivery by cesarean section during the second pregnancy has been established.The prediction efficiency of the model is good,and it can provide a tool for the individualized evaluation of menstrual women in clinical work.

{L-End}Objective To analyze the spectrum characteristics of noise hazards in the metal products industry. {L-End}Methods A total of six metal product industries were selected as research subjects using stratified sampling method. The noise intensity (A/C-weighted) and noise spectrum (Z-weighted) of workplaces and job positions were detected. The characteristics of the noise spectrum of each job position were analyzed using the difference between equivalent continuous C-weighted sound pressure level (L_Ceq)-equivalent continuous A-weighted sound pressure level (L_Aeq), the dominant frequency of the noise spectrum, and cluster analysis methods. {L-End}Results The workplace noise and job position noise of 11 main noise positions in the metal products industry were exceeded national standard, with incidence of 69.2% and 78.1%, respectively. The average of normalization of equivalent continuous A-weighted sound pressure level to a normal 40 hours working week exceeded the national standard in 100.0% of hydraulic workers, welders, and ultrasonic cleaning workers. The result of spectrum analysis showed that the noise in the metal product industry was mainly broadband. The noise of the collision welder position was classified as low-frequency broadband noise, while the noise of the painter position was classified as low-frequency narrowband noise. The noise spectrum characteristics of other positions were similar and classified into one category, all of which were broadband noise. Among them, numerical control lathe workers, welders, threaders, machinists, and cutters were exposed to high-frequency broadband noise, while press workers were exposed to mid-frequency broadband noise, and grinders, hydraulic workers, and ultrasonic cleaning workers were exposed to low-frequency broadband noise. The detection rate of binaural high-frequency hearing threshold improvement among workers was 61.7%, and there was no statistical correlation between the detection rate of binaural high-frequency hearing threshold improvement and the noise level intensity of each spectrum. {L-End}Conclusion The level of noise hazards in the metal products industry is severe. Effective engineering control measures and hearing protection measures should be implemented based on the spectral characteristics of noises.