Objective To analyze the current status and influencing factors of occupational stress, job burnout and sleep quality among workers in the secondary industry in Jinshan District, Shanghai City. Methods A total of 1 418 workers from six key industries in Jinshan District, Shanghai City were selected as the study subjects by the stratified cluster sampling method. The Occupational Stress Core Scale, Maslash Burnout Inventory General Survey and Pittsburgh Sleep Quality Index were used to investigate occupational stress, job burnout and sleep quality of the workers. Results The detection rates of occupational stress, job burnout and sleep disturbance among the study subjects were 33.6%, 65.4% and 23.3%, respectively. Multivariate logistic regression analysis showed that the workers with a monthly income <5 000 yuan had a higher risk of occupational stress than those with a monthly income ≥5 000 yuan (P<0.01). The workers with ≥5.0 years of service had a higher risk than those with <1.0 year (P<0.05). Lack of physical exercise, employment in medium- and large-sized enterprises, and shift work were risk factors of occupational stress in the workers (all P<0.01). The workers aged 18-<30 years had a higher risk of job burnout than those aged 45-<60 years (P<0.05). The workers monthly income <5 000 yuan was associated with a higher risk of job burnout than those with ≥9 000 yuan (P<0.05). The workers with 1.0-<10.0 years or ≥15.0 years of service had higher job burnout risks than those with <1.0 year (all P<0.05). Being unmarried, lack of physical exercise, and employment in medium- and large-sized enterprises were risk factor of job burnout in the workers (all P<0.05). The workers with an educational level of high school or above had a higher risk of sleep disturbance than those with junior school or below (P<0.05). The workers who work >56 hours per week had a higher risk than those working ≤40 hours per week (P<0.01). Conclusion There is a high detection rate of occupational stress, job burnout, and sleep disturbance in the secondary industry workers in Jinshan District, Shanghai City. Special attention should be given to workers with low income, lack of physical exercise, employment in medium- and large-sized enterprises, shift work, long service duration, and long weekly working hours to protect their physical and mental health.

Objective:To investigate the mosquito-borne viruses carried by mosquito specimens collected from Huachuan county and Huanan county in Heilongjiang province.Methods:Mosquito samples were collected locally in 2023 and processed in the laboratory. Homogenates of the mosquitoes were inoculated into cells for virus isolation, followed by molecular and bioinformatics analyses of the viral isolates.Results:In 2023, ten viral isolates were obtained from Anopheles sinensis specimens collected in Heilongjiang province, China. Among these isolates, one was identified as Culex flavivirus (CxFV), one as Menghai rhabdovirus (MRV), and eight as Nam Dinh virus (NDiV). The phylogenetic analysis showed that CxFV belongs to genotype I and is clustered with the strains isolated from Liaoning province in 2011 and Ningxia Hui autonomous Region in 2019 in the same evolutionary branch, with amino acid similarity ranging from 98.2% to 99.2% and nucleotide similarity ranging from 98.8% to 99.2%. The MRV strain belongs to the same evolutionary subclade as the strain detected in Guangdong, with both nucleotide and amino acid similarity of 98.0%. Eight NDiV isolates clustered with the South Korean isolates on the same evolutionary branch, forming an independent evolutionary sub-branch. The nucleotide similarity among these eight isolates ranged from 98.5% to 99.7%, while the amino acid similarity ranged from 98.1% to 99.7%. In comparison, when matched with other NDiV isolates from China, the nucleotide similarity of these eight isolates ranged from 94.1% to 97.8%, and the amino acid similarity ranged from 93.5% to 97.7%.Conclusions:This study represents the first isolation of CxFV, MRV, and NDiV in Heilongjiang province, China, and the findings provide fundamental data for the prevention and control of mosquito-borne viral diseases in this region.

Objective:To investigate the mosquito-borne viruses carried by mosquito specimens collected from Huachuan county and Huanan county in Heilongjiang province.Methods:Mosquito samples were collected locally in 2023 and processed in the laboratory. Homogenates of the mosquitoes were inoculated into cells for virus isolation, followed by molecular and bioinformatics analyses of the viral isolates.Results:In 2023, ten viral isolates were obtained from Anopheles sinensis specimens collected in Heilongjiang province, China. Among these isolates, one was identified as Culex flavivirus (CxFV), one as Menghai rhabdovirus (MRV), and eight as Nam Dinh virus (NDiV). The phylogenetic analysis showed that CxFV belongs to genotype I and is clustered with the strains isolated from Liaoning province in 2011 and Ningxia Hui autonomous Region in 2019 in the same evolutionary branch, with amino acid similarity ranging from 98.2% to 99.2% and nucleotide similarity ranging from 98.8% to 99.2%. The MRV strain belongs to the same evolutionary subclade as the strain detected in Guangdong, with both nucleotide and amino acid similarity of 98.0%. Eight NDiV isolates clustered with the South Korean isolates on the same evolutionary branch, forming an independent evolutionary sub-branch. The nucleotide similarity among these eight isolates ranged from 98.5% to 99.7%, while the amino acid similarity ranged from 98.1% to 99.7%. In comparison, when matched with other NDiV isolates from China, the nucleotide similarity of these eight isolates ranged from 94.1% to 97.8%, and the amino acid similarity ranged from 93.5% to 97.7%.Conclusions:This study represents the first isolation of CxFV, MRV, and NDiV in Heilongjiang province, China, and the findings provide fundamental data for the prevention and control of mosquito-borne viral diseases in this region.

ObjectiveTo construct a macro-evaluation tool for dampness syndrome （DS） animal model， which will provide a basis for experimental research on dampness syndrome in traditional Chinese medicine （TCM）. MethodsConceptual framework of this study was clarified through discussions within the core working group， and dimensions of the evaluation of the animal model of DS were identified according to TCM principles. We searched CNKI， Wanfang， VIP and SinoMed databases from the inception to June 30th， 2023， on experiments involving dampness syndrome animals to create a pool of items about DS animal models. The core items were selected and extracted for factor analysis and cluster analysis. An expert importance rating questionnaire was developed based on the results of the literature review， analyzing the distribution of item scores， importance averages， and coefficient of variation. Through a comprehensive analysis of literature， expert importance scoring， and specific expert opinions， items that did not meet anyone of the criteria of average importance rating ≥2.04， coefficient of variation ≤30%， or literature eva-luation frequency ≥2% were removed， thereafter， the macro-evaluation tool for DS animal model was preliminarily constructed. ResultsSpirit and body state， autonomic activity state， body surface characteristics， diet， urination and defecation， tongue manifestation， and motor behavior assessment were constructed as the seven dimensions in the evaluation of DS animal model. A total of 348 papers about animal experiments were included and analyzed， resulting in a saturated pool of 72 items， which was refined to 38 core items of DS animal models. Factor analysis obtained 16 common factors， which were further clustered into two categories， named dampness transforming from heat syndrome and dampness transforming from cold syndrome. The expert importance scoring showed that the Kendall harmony coefficient was 0.359 （P＜0.05） indicating a high level of agreement， coordination and reliability among the experts. Notably， 50% or more of the experts considered the items thick and greasy tongue coating， unclean perianal area， loose stools， lethargy， unformed stools， and listless expression as very important. The median scores for all items were 2.04（1.73， 2.37）， with a coefficient of variation ranging from 19.73% to 53.38%. After expert evaluation， the macro-evaluation tool for DS animal model in TCM with 33 items and corresponding criteria for assessing the formation of DS models was finally contructed. ConclusionThe Macro-evaluation tool for DS animal model in TCM is highly scientific， credible， and operable， and can be utilized in DS animal experiments after its characteristics are actually evaluated.

Blood brain barrier (BBB) injury is the main pathological manifestation of many neurological diseases. Glycocalyx is the gel layer covering the lumen side of vascular endothelial cells, which plays an important role in regulating BBB function. However, glycocalyx is very fragile and easily damaged in various neurological diseases, leading to BBB destruction. This article focuses on the potential role of glycocalyx in cerebrovascular disease, the possible mechanisms related to glycocalyx and BBB injury, and explores the potential therapeutic strategies for protecting and restoring endothelial glycocalyx.

Objective:To analyze the protective effect of neurotracheal catheter monitoring on recurrent laryngeal nerve in patients with bilateral cervical lymph node dissection of thyroid cancer.Methods:The clinical data of 92 patients undergoing bilateral cervical lymph node dissection for thyroid cancer at the First People's Hospital of Shangqiu from Jul 2019 to Aug 2022 were retrospectively analyzed. Patients were divided into control group (routine exposure, 52 cases) and study group (intraoperative neurotrachatic catheter monitoring, 40 cases) The general data, perioperative indicators, parathyroid function, vocal cord function, voice disorder index, quality of life and postoperative complications were compared between the two groups.Results:The intraoperative blood loss in the study group [(12.3±3.3) ml] was less than that in the control group [(16.9±4.0) ml]. The exposure time [(8.7±2.6) min], operation time [(4.0±0.8) h] and postoperative hospitalization time [(3.2±0.9) d] were shorter than those of control group [(14.4±3.6) min, (4.5±1.2) h, (5.7±1.3) d] ( t=5.770, 8.391, 2.387, 10.853, all P<0.05);Amplitude perturbation (4.85%± 0.58%), fundamental frequency perturbation (0.28%±0.17%), standardized noise energy [(-20.3±4.4) dB], VHI-10 score [(1.6±0.5) score], Quality of life scale for cancer patients 1 month after surgery the TG-V4 score [(43.7±4.8) points] was lower than that of control group [(3.05%±0.54%), (0.42%±0.16%), (-14.6±3.3) dB, (3.3±0.4) points, (50.4±5.6) points]. The harmonic noise ratio [(24.9±4.1) dB] was higher than that of the control group [(20.3±4.4) dB] ( t=10.446, 4.049, 7.036, 19.076, 6.116, 5.144, all P<0.001);The incidence of postoperative complications in the study group (8%) was lower than that in the control group (23%) ( χ2=4.020, P=0.045). Conclusion:Neurotracheal catheter monitoring during bilateral cervical lymph node dissection for thyroid cancer can improve vocal cord function, reduce recurrent laryngeal nerve injury, reduce voice disturbance and improve quality of life.

Objective:To explore the anatomical parameters of the ideal trajectory for pedicle screw fixation through the lamina in the treatment of L 5 spondylolysis. Methods:CT data from 40 male patients with bilateral L 5 spondylolysis (age, 24.95±4.01 years; range, 20-36 years), treated at the 940th Hospital of PLA Joint Logistics Support Force between January 2021 and June 2024, were analyzed. Three-dimensional vertebral models were reconstructed using this data. Measurements included the lumbosacral angle, the thickness at the midpoint of the superior and inferior lamina edges, mid-lamina thickness, the distance from the lateral edge of the lamina to the spinous process midline, the thickness at the defect of the pars interarticularis, and the vertical diameter of the defect. The screws were inserted from the inferior edge of the lamina, passing through the pars interarticularis defect, and exiting at the superior edge of the pedicle. In the vertical direction of the lamina, the inferior and superior edges of the lamina were divided into three zones, named A, B, C (for the inferior lamina edge) and 1, 2, 3 (for the superior pedicle edge). Seven trajectories (A2, A3, B1, B2, B3, C2, and C3) were designed by combining these zones. Screws with diameters of 5.0, 4.5, 4.0, and 3.5 mm were sequentially inserted along each trajectory. Screw trajectories with an insertion success rate ≥95% were selected and evaluated for feasibility. Parameters such as screw length, medial inclination angle, caudal inclination angle, and entry point position were measured. The ideal trajectory and screw dimensions were determined by considering anatomical features, screw characteristics, and insertion safety. Results:The measurement results from the 3D model showed that the lumbosacral angle was 36.22°±5.23°, and the midpoint thickness of the superior lamina edge was 4.14±0.66 mm (left) and 4.18±0.65 mm (right), the mid-lamina thickness was 6.73±0.72 mm (left) and 6.72±0.70 mm (right), the midpoint thickness of the inferior lamina edge was 6.50±0.56 mm (left) and 6.50±0.66 mm (right), the distance from the lateral edge of the lamina to the spinous process midline was 25.95±2.86 mm (left) and 26.39±3.10 mm (right), the thickness at the pars defect was 9.67±0.57 mm (left) and 9.67±0.51 mm (right), and the vertical diameter of the pars defect was 18.76±2.16 mm (left) and 19.26±2.03 mm (right). No statistically significant differences were found between the left and right sides for these parameters ( P>0.05). The trajectories considered feasible and with an insertion success rate ≥95% were B2, B3, C2, and C3. Safe screw diameters were B2 (4.5 mm), B3 (4.0 mm), C2 (4.0 mm), and C3 (3.5 mm). Corresponding screw lengths were B2 (38.28±2.34 mm), B3 (37.03±2.99 mm), C2 (38.37±2.42 mm), and C3 (36.88±2.87 mm). The caudal inclination angles were B2 (52.73°±5.29°), B3 (55.06°± 4.46°), C2 (49.09°±3.92°), and C3 (50.18°±4.36°). The medial inclination angles were B2 (21.21°±3.01°), B3 (5.11°±1.58°), C2 (22.55°±2.46°), and C3 (12.59°±1.80°). The distances from the entry point to the spinous process midline were B2 (13.23±1.68 mm), B3 (13.15±1.46 mm), C2 (11.12±0.64 mm), and C3 (11.09±0.65 mm). The distances from the entry point to the root of the spinous process were B2 (8.23±1.46 mm), B3 (8.21±1.31 mm), C2 (6.65 ±0.76 mm), and C3 (6.67±0.72 mm). Differences in screw length, caudal inclination angle, medial inclination angle, and entry point position across trajectories were statistically significant ( P<0.05). Conclusion:The ideal screw trajectory for L 5 spondylolysis involves insertion through the midpoint of the entry zone, passing through the pars defect, and exiting at the midpoint of the superior edge of the pedicle. The optimal entry point is located on the inferior edge of the lamina, 8.23±1.46 mm from the root of the spinous process and 13.23±1.68 mm from the spinous process midline. The screw should be placed at a caudal inclination angle of 52.73°±5.29° and a medial inclination angle of 21.21°±3.01°. The recommended screw length is 38.28±2.34 mm, with a diameter of 4.5 mm (range, 4.5-5.0 mm).

Objective:To explore the anatomical parameters of the ideal trajectory for pedicle screw fixation through the lamina in the treatment of L 5 spondylolysis. Methods:CT data from 40 male patients with bilateral L 5 spondylolysis (age, 24.95±4.01 years; range, 20-36 years), treated at the 940th Hospital of PLA Joint Logistics Support Force between January 2021 and June 2024, were analyzed. Three-dimensional vertebral models were reconstructed using this data. Measurements included the lumbosacral angle, the thickness at the midpoint of the superior and inferior lamina edges, mid-lamina thickness, the distance from the lateral edge of the lamina to the spinous process midline, the thickness at the defect of the pars interarticularis, and the vertical diameter of the defect. The screws were inserted from the inferior edge of the lamina, passing through the pars interarticularis defect, and exiting at the superior edge of the pedicle. In the vertical direction of the lamina, the inferior and superior edges of the lamina were divided into three zones, named A, B, C (for the inferior lamina edge) and 1, 2, 3 (for the superior pedicle edge). Seven trajectories (A2, A3, B1, B2, B3, C2, and C3) were designed by combining these zones. Screws with diameters of 5.0, 4.5, 4.0, and 3.5 mm were sequentially inserted along each trajectory. Screw trajectories with an insertion success rate ≥95% were selected and evaluated for feasibility. Parameters such as screw length, medial inclination angle, caudal inclination angle, and entry point position were measured. The ideal trajectory and screw dimensions were determined by considering anatomical features, screw characteristics, and insertion safety. Results:The measurement results from the 3D model showed that the lumbosacral angle was 36.22°±5.23°, and the midpoint thickness of the superior lamina edge was 4.14±0.66 mm (left) and 4.18±0.65 mm (right), the mid-lamina thickness was 6.73±0.72 mm (left) and 6.72±0.70 mm (right), the midpoint thickness of the inferior lamina edge was 6.50±0.56 mm (left) and 6.50±0.66 mm (right), the distance from the lateral edge of the lamina to the spinous process midline was 25.95±2.86 mm (left) and 26.39±3.10 mm (right), the thickness at the pars defect was 9.67±0.57 mm (left) and 9.67±0.51 mm (right), and the vertical diameter of the pars defect was 18.76±2.16 mm (left) and 19.26±2.03 mm (right). No statistically significant differences were found between the left and right sides for these parameters ( P>0.05). The trajectories considered feasible and with an insertion success rate ≥95% were B2, B3, C2, and C3. Safe screw diameters were B2 (4.5 mm), B3 (4.0 mm), C2 (4.0 mm), and C3 (3.5 mm). Corresponding screw lengths were B2 (38.28±2.34 mm), B3 (37.03±2.99 mm), C2 (38.37±2.42 mm), and C3 (36.88±2.87 mm). The caudal inclination angles were B2 (52.73°±5.29°), B3 (55.06°± 4.46°), C2 (49.09°±3.92°), and C3 (50.18°±4.36°). The medial inclination angles were B2 (21.21°±3.01°), B3 (5.11°±1.58°), C2 (22.55°±2.46°), and C3 (12.59°±1.80°). The distances from the entry point to the spinous process midline were B2 (13.23±1.68 mm), B3 (13.15±1.46 mm), C2 (11.12±0.64 mm), and C3 (11.09±0.65 mm). The distances from the entry point to the root of the spinous process were B2 (8.23±1.46 mm), B3 (8.21±1.31 mm), C2 (6.65 ±0.76 mm), and C3 (6.67±0.72 mm). Differences in screw length, caudal inclination angle, medial inclination angle, and entry point position across trajectories were statistically significant ( P<0.05). Conclusion:The ideal screw trajectory for L 5 spondylolysis involves insertion through the midpoint of the entry zone, passing through the pars defect, and exiting at the midpoint of the superior edge of the pedicle. The optimal entry point is located on the inferior edge of the lamina, 8.23±1.46 mm from the root of the spinous process and 13.23±1.68 mm from the spinous process midline. The screw should be placed at a caudal inclination angle of 52.73°±5.29° and a medial inclination angle of 21.21°±3.01°. The recommended screw length is 38.28±2.34 mm, with a diameter of 4.5 mm (range, 4.5-5.0 mm).

Objective:To investigate the differences between the expression levels of ribosomal protein L32 (RPL32) in human breast cancer tissue and normal breast tissue and the effects on the proliferation of breast cancer cells.Methods:Paraffin samples of breast cancer tissues and adjacent tissues (more than 3 cm from the tumor margin) were collected from 56 breast cancer patients in the Department of Thyroid and Breast Surgery of the First People's Hospital of Shangqiu City from July 2020 to May 2022. The expression of RPL32 in 56 breast cancer patients and their corresponding paracancer tissues was detected by immunohistochemistry. MCF7 cells were divided into experimental group (ribosomal protein L32, RPL32) and control group (negative control, NC). MCF7 cells in experimental group were transfected with RPL32-siRNA vector, while MCF7 cells in control group were transfected with scramble siRNA vector. RPL32 mRNA content in each group was detected by RT-PCR. The expressions of RPL32 and P53 in the experimental group and control group were detected by western blot. The proliferative ability of cells in each group was detected by CCK8 assay. The clonogenesis ability of each group of cells was detected by clone formation experiment.Results:The positive rate of RPL32 in breast cancer patients was 8.93% (5/56), and the expression rate of RPL32 in paracancer tissues was 78.57% (44/56). The expression rate of RPL32 in breast cancer patients was significantly higher than that in paracancer tissues, with statistical significance ( P=0.007). After transfection with siRNA vector, the mRNA content of RPL32 in MCF7 cells of experimental group and control group decreased, and the protein expression level of RPL32 was 1.09±0.21 and 0.40±0.11, respectively. The expression levels of P53 protein were 1.24±0.32 and 0.37±0.09, respectively. The absorbance of CCK8 at 120 h was 1.11±0.24 and 2.19±0.28, respectively, and the proliferation ability of MCF7 cells in the experimental group was significantly decreased ( P=0.043). The results of clone formation experiment showed that the cell clone formation rate of the experimental group and the control group was (21.11±3.46) % and (58.75±4.29) %, respectively, and the cell clone formation of the experimental group was decreased ( P=0.026) . Conclusions:The expression of RPL32 is significantly increased in breast cancer, which may be related to the malignant degree of breast cancer. Inhibition of RPL32 expression in breast cancer cells affects its proliferation ability.

ObjectiveTo analyze the effect of O₃ pollution on outpatient visits for respiratory diseases in a district of Shanghai. MethodsWe collected the respiratory disease outpatient data， and atmospheric and meteorological data of from a suburban general hospital in Shanghai from 2015 to 2017. A time-series analysis by generalized additive model was conducted to examine the relationship between O₃ pollution and daily outpatient visits. ResultsThe daily outpatient volume for respiratory diseases was 831. The daily 8 h median concentration of O₃ was 101.04 μg·m^-3. The excess relative risk was 0.461% （95%CI： 0.240%‒0.682%） at lag3. Stratified by gender and age， females， child and the aged had higher risk of respiratory diseases. In the double-pollutant model， PM_2.5 and PM₁₀ increased health effects， while CO reduced health effects. ConclusionThe increase of O₃ concentration can increase the daily outpatient volume of respiratory diseases.