Objective: To evaluate the current situation of thermal environment in primary and secondary school classrooms during winter, and to analyze students thermal comfort needs, so as to provide a basis for improving classroom thermal environment. Methods: From December 16 to 26, 2024, a stratified cluster random sampling method was used to select 90 classrooms from 15 primary and secondary schools in centralized/air conditioned heating areas(Liaoning Province, Tianjin City, Shanghai City) and naturally ventilated areas(Anhui Province and Jiangxi Province)for on site environmental measurement. A questionnaire survey was conducted among 743 students. The differences between groups using the χ 2 test were compared. Based on actual measurement data, a predicted mean vote prepared percentage of dissatisfied (PMV-PPD) model for centralized/air conditioned classrooms and an adaptive model for naturally ventilated classrooms were established, and the thermal neutral temperature and comfort interval were calculated. Results: The average outdoor temperature during on site measurement was 4.00(0.20，7.00)℃. In classrooms with centralized or air conditioned heating systems, the measured average temperature was (19.33±2.59)℃, with a thermal comfort range of 20.35-25.35 ℃ and a thermal neutral temperature of 22.85 ℃. And 13.92% of students reported feeling cold, while 80.80% felt comfortable. In classrooms with natural ventilation, the measured average temperature was (12.26±1.83)℃, with a thermal neutral temperature of 19.67 ℃ and a thermal comfort range of 16.17-23.17 ℃. About 48.33% of students reported feeling cold, and 49.81 % felt comfortable.The results of univariate analysis showed that there were statistically significant differences in shoe thickness, temperature sensation, relative humidity sensation and wind speed sensation between centralized/air conditioned heating areas ( χ 2= 7.01 , 31.47, 13.57, 13.80,all P <0.05). There were also statistically significant differences in school stage for primary and secondary school students, body mass index, classroom location for seat, temperature sensation, relative humidity sensation and wind speed sensation between naturally ventilated areas ( χ 2=42.13, 11.13, 11.04, 60.39, 29.27, 38.46,all P <0.05). Conclusions There are differences in thermal environment and students subjective thermal comfort in primary and secondary schools under different ventilation modes in winter. The temperature standards for heated classrooms should be revised, and differentiated environmental regulation strategies should be adopted based on different ventilation methods to improve students health and comfort levels.

Oral squamous cell carcinoma (OSCC) is a common head and neck malignancy. Approximately 50% to 60% of patients with OSCC are diagnosed at a locally advanced stage (clinical staging III-IVa). Even with comprehensive and sequential treatment primarily based on surgery, the 5-year overall survival rate remains below 50%, and patients often suffer from postoperative functional impairments such as difficulties with speaking and swallowing. Programmed death receptor-1 (PD-1) inhibitors are increasingly used in the neoadjuvant treatment of locally advanced OSCC and have shown encouraging efficacy. However, clinical practice still faces key challenges, including the definition of indications, optimization of combination regimens, and standards for efficacy evaluation. Based on the latest research advances worldwide and the clinical experience of the expert group, this expert consensus systematically evaluates the application of PD-1 inhibitors in the neoadjuvant treatment of locally advanced OSCC, covering combination strategies, treatment cycles and surgical timing, efficacy assessment, use of biomarkers, management of special populations and immune related adverse events, principles for immunotherapy rechallenge, and function preservation strategies. After multiple rounds of panel discussion and through anonymous voting using the Delphi method, the following consensus statements have been formulated: 1) Neoadjuvant therapy with PD-1 inhibitors can be used preoperatively in patients with locally advanced OSCC. The preferred regimen is a PD-1 inhibitor combined with platinum based chemotherapy, administered for 2-3 cycles. 2) During the efficacy evaluation of neoadjuvant therapy, radiographic assessment should follow the dual criteria of Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 and immune RECIST (iRECIST). After surgery, systematic pathological evaluation of both the primary lesion and regional lymph nodes is required. For combination chemotherapy regimens, PD-L1 expression and combined positive score need not be used as mandatory inclusion or exclusion criteria. 3) For special populations such as the elderly (≥ 70 years), individuals with stable HIV viral load, and carriers of chronic HBV/HCV, PD-1 inhibitors may be used cautiously under the guidance of a multidisciplinary team (MDT), with close monitoring for adverse events. 4) For patients with a poor response to neoadjuvant therapy, continuation of the original treatment regimen is not recommended; the subsequent treatment plan should be adjusted promptly after MDT assessment. Organ transplant recipients and patients with active autoimmune diseases are not recommended to receive neoadjuvant PD-1 inhibitor therapy due to the high risk of immune related activation. Rechallenge is generally not advised for patients who have experienced high risk immune related adverse events such as immune mediated myocarditis, neurotoxicity, or pneumonitis. 5) For patients with a good pathological response, individualized de escalation surgery and function preservation strategies can be explored. This consensus aims to promote the standardized, safe, and precise application of neoadjuvant PD-1 inhibitor strategies in the management of locally advanced OSCC patients.

Biomolecular condensates are formed through phase separation of biomacromolecules such as proteins and RNAs. These condensates exhibit liquid-like properties that can futher transition into more stable material states. They form complex internal structures via multivalent weak interactions, enabling precise spatiotemporal regulations. However, the use of inconsistent and non-standardized terminology has become increasingly problematic, hindering academic exchange and the dissemination of scientific knowledge. Therefore, it is necessary to discuss the terminology related to biomolecular condensates in order to clarify concepts, promote interdisciplinary cooperation, enhance research efficiency, and support the healthy development of this field.

Background: and Purpose Symptomatic intracranial hemorrhage (sICH) following endovascular thrombectomy (EVT) is a severe complication associated with adverse functional outcomes and increased mortality rates. Currently, a reliable predictive model for sICH risk after EVT is lacking. Methods: This study used data from patients aged ≥20 years who underwent EVT for anterior circulation stroke from the nationwide Taiwan Registry of Endovascular Thrombectomy for Acute Ischemic Stroke (TREAT-AIS). A predictive model including factors associated with an increased risk of sICH after EVT was developed to differentiate between patients with and without sICH. This model was compared existing predictive models using nationwide registry data to evaluate its relative performance. Results: Of the 2,507 identified patients, 158 developed sICH after EVT. Factors such as diastolic blood pressure, Alberta Stroke Program Early CT Score, platelet count, glucose level, collateral score, and successful reperfusion were associated with the risk of sICH after EVT. The TREAT-AIS score demonstrated acceptable predictive accuracy (area under the curve [AUC]=0.694), with higher scores being associated with an increased risk of sICH (odds ratio=2.01 per score increase, 95% confidence interval=1.64–2.45, P<0.001). The discriminatory capacity of the score was similar in patients with symptom onset beyond 6 hours (AUC=0.705). Compared to existing models, the TREAT-AIS score consistently exhibited superior predictive accuracy, although this difference was marginal. Conclusions The TREAT-AIS score outperformed existing models, and demonstrated an acceptable discriminatory capacity for distinguishing patients according to sICH risk levels. However, the differences between models were only marginal. Further research incorporating periprocedural and postprocedural factors is required to improve the predictive accuracy.

On the basis of that the fluorescence wavelength of copper nanoclusters(CuNCs)could cover the entire visible region,multicolor fluorescent CuNCs/starch composites were prepared and applied in fingermark development.With L-glutathione as the reducing agent and protective ligand,blue emissive and orange emissive CuNCs solutions were obtained in alkaline solutions at 90℃and 25℃,respectively.With the aggregation-induced emission effect induced by ethanol as a poor solvent,the fluorescence of orange emissive CuNCs with a higher intensity was achieved in an ethanol-water solution.With ascorbic acid as the reducing agent and 3-mercaptopropionic acid as the protective agent,green emissive CuNCs solution was prepared in an acid solution.Particle morphologies,chemical compositions and optical properties of these three CuNCs above were investigated using physical characterization and spectroscopic analysis,indicating that well-dispersed CuNCs had excellent photoluminescent properties.These CuNCs solutions were combined with starch to form composite powders by simply drying.The influences of the type of CuNCs and the ratio of CuNCs to starch on the emission wavelength and fluorescence intensity of the products were studied.The obtained CuNCs/starch composites could emit blue,green and orange fluorescence under 365 nm ultraviolet light,respectively,which were suitable for fingermark development.Minutiae and partial level-3 features of latent fingermarks could be effectively developed.High-quality fluorescence fingermark images would be captured using appropriate optical filters to eliminate background interference of various substrates.

An efficient analytical method was developed for simultaneous detection of alkylamines and alkylamides in food packaging plastics using liquid chromatography-high resolution mass spectrometry(LC-HRMS).Based on the physicochemical properties of alkylamines and alkylamides,as well as the complexity of plastic samples,sample pretreatment and chromatographic-mass spectrometric parameters were optimized.The samples were extracted by vortex-ultrasonic extraction with a methanol-acetonitrile mixture for 15 min,followed by nitrogen evaporation to concentrate the extract,reconstitution,and analysis.The chromatographic mobile phase consisted of 0.1%formic acid aqueous solution and acetonitrile,and a gradient elution was used.The electrospray ionization(ESI)source was operated in positive ion mode,and mass spectrometry data were collected in full scan and data-dependent acquisition modes.Quantification was performed using an isotope-labeled internal standard method.The results showed that within the quantification range of 1-1000 ng/mL,the calibration curves exhibited good linearity(R2>0.99).Some compounds interfered with the validation experiments at higher concentrations,so only 10 kinds of target analytes were validated.Using a mixed food packaging plastic matrix,the recoveries at spiking levels of 40,400,and 4000 ng/g were mostly between 66.0%and 117.1%,with relative standard deviations ranging from 0.6%to 10.6%.The method was applied to detect 14 food packaging plastic samples,and the results showed that the concentrations of alkylamines and alkylamides ranged from not detected to 8924 ng/g.This method offered high sensitivity and accuracy,and was suitable for the screening and quantitative determination of alkylamines and alkylamides in plastics.

By summarizing the mass spectrometric fragmentation patterns of oxyphenisatin substances,an analytical method was established for screening of illegally added oxyphenisatin compounds in weight-loss health foods using high performance liquid chromatography-in-source-fragmentation-quadrupole time-of-flight mass spectrometry(HPLC-ISF-QTOF-MS),along with a quantitative method for 11 kinds of oxyphenisatin compounds.Based on the developed screening method,an oxyphenisatin derivative was discovered in the reference standards,which was tentatively identified as 4-(3-(4-hydroxyphenyl)-2-oxoindolin-3-yl)phenyl acetate and confirmed by MS/MS analysis.The results showed that all 11 kinds of oxyphenisatin compounds had correlation coefficients greater than 0.9971,with limits of detection(LODs)ranging from 0.12 to 0.68 μg/L and limits of quantification(LOQ)from 0.21 to 2.29 μg/L.The LODs for 11 kinds of characteristic ions ranged from 0.45 to 9.11 μg/kg.At spiking levels of 25,50 and 100 μg/kg,the recoveries ranged from 78.9%to 117.3%.The instrumental precision,intra-day method precision and inter-day method precision were 0.23%?1.70%,0.7%?2.4%,and 1.1%?3.3%,respectively.The developed targeted and non-targeted detection method demonstrated high sensitivity,strong stability,rapid analysis,and an expanded screening range for oxyphenisatin substances,and provided robust technical support for regulatory authorities in combating illegal adulteration.

Objective To construct an aptamer-functionalized carboxylated graphene oxide(CGO)fluo-rescent sensor to achieve highly sensitive and specific detection of ketamine(KET)and its metabolite norketamine(NK)using an aptamer capable of simultaneously recognizing KET and NK.Methods A specific aptamer for simultaneous recognition of KET and NK was screened using graphene oxide-sys-tematic evolution of ligand by exponential enrichment(GO-SELEX)and molecular docking tech-niques.The aptamer,labeled with Cy5 fluorescence,was chemically conjugated to CGO to construct an aptamer-functionalized CGO fluorescent sensor.By optimizing detection conditions,including the mass concentration of CGO,aptamer concentration,reaction temperature,and incubation time,quantita-tive analysis of the target analytes was achieved using the ratio of fluorescence intensity changes be-fore and after target addition.The stability of the sensor in biological matrices was evaluated by moni-toring fluorescence intensity changes over incubation time in blank blood and urine,in comparison with the traditional physical adsorption-based CGO fluorescent sensor.Spiked recovery experiments in blank blood and urine were conducted to compare performance with that of HPLC-MS/MS.Results A specific aptamer A5 was selected and chemically conjugated with CGO to construct the aptamer-functionalized CGO fluorescent sensor.Under optimized conditions,the proposed fluorescent sensor ex-hibited a linear detection range of 1.0-5.0 ng/mL for KET,with a limit of detection(LOD)of 0.86 ng/mL;while for NK,the linear detection range was 1.0-5.0 ng/mL,with an LOD of 0.70 ng/mL.Com-pared with the CGO fluorescent sensor constructed via physical adsorption,this sensor demonstrated greater stability in blood and urine.The spiked recovery rates of KET and NK in blank blood and urine ranged from 81.50%to 110.03%,exhibiting detection performance comparable to that of HPLC-MS/MS.Conclusion The aptamer screening method offers a novel approach for selecting aptamers tar-geting drugs and their metabolites.The constructed aptamer-functionalized CGO fluorescent sensor pro-vides an efficient and reliable strategy for the high-performance detection of KET and NK.

This study identified 8 members including NjBIN2 of the GSK3 family in Nardostachys jatamansi by bioinformatics analysis. Moreover, the phylogenetic tree revealed that the GKS3 family members of N. jatamansi had a close relationship with those of Arabidopsis. RT-qPCR results showed that NjBIN2 presented a tissue-specific expression pattern with the highest expression in roots, suggesting that NjBIN2 played a role in root growth and development. In addition, the application of epibrassinolide or the brassinosteroid(BR) synthesis inhibitor(brassinazole) altered the expression pattern of NjBIN2 and influenced the photomorphogenesis(cotyledon opening) and root development of N. jatamansi, which provided direct evidence about the functions of NjBIN2. In conclusion, this study highlights the roles of BIN2 in regulating the growth and development of N. jatamansi by analyzing the expression pattern and biological function of NjBIN2. It not only enriches the understanding about the regulatory mechanism of the growth and development of N. jatamansi but also provides a theoretical basis and potential gene targets for molecular breeding of N. jatamansi with improved quality in the future.
Brassinosteroids/metabolism* ; Steroids, Heterocyclic/metabolism* ; Gene Expression Regulation, Plant/drug effects* ; Plant Proteins/metabolism* ; Phylogeny ; Nardostachys/metabolism* ; Plant Growth Regulators/pharmacology* ; Plant Roots/drug effects*

Eight butyl-phthalides, senkyunolide K(1), senkyunolide N(2), butylphthalide(3), senkyunolide I(4), senkyunolide H(5),(Z)-butylidenephthalide(6),(Z)-ligustilide(7), and 3-butylidene-7-hydroxyphthalide(8) were isolated from the aerial part of Ligusticum sinense by column chromatography on silica gel column, ODS, Sephadex LH-20 and semi-preparative HPLC. Their structures were elucidated on the basis of spectroscopic and chemical data, especially NMR and MS. Compound 1 was a new butyl-phthalide and compounds 2-8 were isolated from the aerial part of L. sinense for the first time. Furthermore, the inhibitory activities of compounds 1-8 against the nitric oxide(NO) production induced by lipopolysaccharide(LPS) in mouse RAW264.7 macrophages in vitro were evaluated. The results showed that compounds 1-8 exerted inhibitory activities on NO production with IC_(50) of 19.34-42.16 μmol·L~(-1).
Animals ; Mice ; Nitric Oxide/biosynthesis* ; Ligusticum/chemistry* ; Benzofurans/isolation & purification* ; Drugs, Chinese Herbal/isolation & purification* ; Macrophages/immunology* ; RAW 264.7 Cells ; Molecular Structure