Objective To compare the pain relief and long-term clinical success rate of vital pulp therapy and root canal treatment in mature permanent teeth with carious irreversible pulpitis.Methods A total of 90 patients diagnosed with carious irreversible pulpitis in mature permanent teeth were collected at Shanghai Stomatological Hospital from Jan 2021 to Jun 2022.They were randomly divided into two groups:test group(n=45)undergoing vital pulp therapy(VPT)and control group(n=45)undergoing root canal treatment(RCT).Pain scores were recorded before treatment,24 hours after operation and 7 days after operation.We conducted clinical evaluation and imaging analysis at 1,6,and 12 months after the surgery,then compared the pain scores and treatment success rates between the two groups.Results Eighty-one patients,including 39 patients in group VPT aged(31.00±1.43)years old and 42 patients in group RCT aged(30.60±1.54)years old,received follow-up for more than 1 year,and the success rate of the test group and control was 97.44%and 95.24%.The pain degree of the two groups was reduced at 24 hours and 7 days after operation(P<0.05),and the pain score of the test group was reduced compared with that in the control group 7 days after operation(P<0.01).Conclusion Compared with root canal treatment,vital pulp therapy for mature permanent teeth with carious irreversible pulpitis can achieve good results in short-term pain evolution and long-term clinical success.

Objective:To explore the prognostic factors of seroma after endoscopic thyroidectomy by breast ap-proach,and construct a nomogram to predict the possibility of cervical seroma.Methods:Data of patients undergoing endoscopic thyroid surgery in Dongguan Tungwah Hospital from January 2022 to May 2024 and Dongguan Songshan Lake Tungwah Hospital from May 2023 to August 2024 were retrospectively analyzed,and 1493 patients meeting the in-clusion criteria were selected.Among them,there were 1048 patients in Dongguan Tungwah Hospital as the training co-hort,1015 patients without seroma group and 33 patients with seroma group.There were 445 patients in Dongguan Songshan Lake Tungwah Hospital as the verification cohort,including 424 patients without seroma and 21 patients with seroma.Multivariate logistic regression analysis was used to obtain relevant independent prognostic factors,and R soft-ware established a nomogram model.Calibration curves,Hosmer-Lemeshow goodness of fit,ROC curves were used to evaluate the calibrability of the nomogram model,and clinical utility was assessed by clinical decision curves.Results:Multivariate logistic regression analysis showed that central lymph node dissection,diabetes,hyperthyroidism,and nod-ule size were independent prognostic factors related to seroma.Based on the prognostic factors,the nomogram of se-roma after ETBA was constructed.The calibration curves of the training and the verification group were in good agree-ment with the observed results,and the Hosmer-Lemeshow goodness of fit test was good,with the training cohort P=0.244 and the verification cohort P=0.803.The ROC curve of the training cohort showed that the area under the curve was 0.810(95%CI:0.740～0.879),and the ROC curve of the verification cohort showed that the area under the curve was 0.815(95%CI:0.722～0.909).Conclusion:The nomogram model based on the relevant prognostic factors ob-tained by multivariate logistic regression analysis has a good prediction effect on the seroma after ETBA,and can provide reasonable and individualized treatment plan for patients.

Isoflavones which mainly distributed in leguminous plants have plenty of health benefits.Isoflavone synthase(IFS)is a membrane-associated cytochrome P450 enzyme(CYP450)which carries out the unique aryl-ring migration and hydroxylation.So far,few crystal structures of plant P450s have been obtained.We determined the crystal structure of IFS from Medicago truncatula at 1.9 ? by MAD method using a selenomethionine substituted crystal and conducted molecular docking and mutagenesis study.The structure of IFS complexed with imidazole exhibits the helix Ⅰa-loop-helix Ⅰβ motif which cor-responds to helix Ⅰ of other P450s.Compared with structures of common P450s,IFS/imidazole structure contains an extra domain,i.e.,the γ-domain.The structure reveals a homodimer in which the γ-domain of one molecule interacts with the β-domain of another.The plane of heme group makes an angle of ap-proximately 40° with the helix Ⅰa-loop-helix Ⅰβ motif.Molecular docking combined with mutagenesis study suggested that Trp-128 and Asp-300 might play important roles in substrate binding and recogni-tion.Phe-301,Ser-303 and Gly-305 from the helix Ⅰa-loop-helix Ⅰβ motif may play important roles in the aryl-ring migration.These novel structural features reveal insights into the unique reaction mechanism of IFS and provide a basis for engineering IFS in leguminous crops for health purpose.

Isoflavones which mainly distributed in leguminous plants have plenty of health benefits.Isoflavone synthase(IFS)is a membrane-associated cytochrome P450 enzyme(CYP450)which carries out the unique aryl-ring migration and hydroxylation.So far,few crystal structures of plant P450s have been obtained.We determined the crystal structure of IFS from Medicago truncatula at 1.9 ? by MAD method using a selenomethionine substituted crystal and conducted molecular docking and mutagenesis study.The structure of IFS complexed with imidazole exhibits the helix Ⅰa-loop-helix Ⅰβ motif which cor-responds to helix Ⅰ of other P450s.Compared with structures of common P450s,IFS/imidazole structure contains an extra domain,i.e.,the γ-domain.The structure reveals a homodimer in which the γ-domain of one molecule interacts with the β-domain of another.The plane of heme group makes an angle of ap-proximately 40° with the helix Ⅰa-loop-helix Ⅰβ motif.Molecular docking combined with mutagenesis study suggested that Trp-128 and Asp-300 might play important roles in substrate binding and recogni-tion.Phe-301,Ser-303 and Gly-305 from the helix Ⅰa-loop-helix Ⅰβ motif may play important roles in the aryl-ring migration.These novel structural features reveal insights into the unique reaction mechanism of IFS and provide a basis for engineering IFS in leguminous crops for health purpose.

This study was aimed at establishing a method of ultra-fast quantitative PCR for Brucella detection.We used an exogenous recombinant plasmid as the internal reference and targeted the T4SS secretion system,an important Brucella viru-lence factor,to design specific primers and probes.The sensitivity,specificity,and repeatability of this method were evaluated,and a standard curve was constructed.The coincidence rate of detection findings with this method versus quantitative PCR was determined.This method markedly decreased the detection time to only 10 minutes.The standard curve demonstrated a good linear relationship(Y=-3.410 7x+38.357,R2=0.998 5)with a low minimum detection limit of 10 copies/μL.The method exhibited good specificity and did not specifically amplify several common clinical bacteria other than Brucella.The de-tection of three concentrations of positive plasmids yielded coefficients of variation(CVs)of 0.20％to 0.91％,thus demonstra-ting the method's excellent repeatability.Furthermore,140 clinical samples were analyzed concurrently with the fluorescence PCR method,which yielded a 100％compliance rate and consistent results.Our findings indicated that the Brucella ultra-fast quantitative PCR was ultrafast;had high sensitivity,high specificity,and good specificity;and can be used for the clinical de-tection of Brucella and emergency investigation of epidemics.Therefore,this method is valuable for the early diagnosis of Bru-cella.

Objective:Investigation of the relationship between variant angina pectoris syncope and coronary artery spastic targeted location, arrhythmias, and coronary artery stenostic lesion.Methods:This study combined retrospective and prospective registry approaches. Data were sourced from the case database of Henan province "Multicenter Clinical Observation Study of Variant Angina Pectoris". A total of 507 patients with variant angina pectoris who had complete records from June 1980 to December 2022 were consecutively enrolled. Select patients among them who experienced syncope, and analyze the target vessel sites of coronary artery spasm, arrhythmias during variant angina pectoris attacks, and the degree of stenosis in coronary artery lesions.Results:Among 507 variant angina pectoris patients, 88 experienced syncope. Age was (53.9±9.7) years and 66 patients (75.0%) were male. Forty patients (45.5%, 40/88) were aged 50-59 years. The incidence of syncope in variant angina pectoris caused by left anterior descending artery (LAD) spasm, right coronary artery (RCA) spasm, and multivessel coronary artery spasm was 7.4% (15/202), 22.7% (42/185), and 23.6% (25/106), respectively. The latter two were significantly higher than those in the LAD group ( P all<0.05). Among 77 patients with variant angina pectoris syncope, definitive electrocardiogram recordings were available during syncope episodes. All patients exhibited arrhythmias during syncope: 34 cases involved tachyarrhythmias and 43 cases involved bradyarrhythmias. The incidence of rapid arrhythmias in patients with LAD, RCA, and multi-vessel spasm syncope was 72.7% (8/11), 24.3% (9/37), and 54.2% (13/24), respectively, with P<0.05 for the first two. Bradyarrhythmias occurred in 27.3% (3/11) of LAD, 75.7% (28/37) of RCA, and 45.8% (11/24) of multivessel coronary artery spasm syncope cases, with the first two showing P<0.05. Coronary angiography analysis of 56 syncope patients revealed target vessel locations and stenosis severity: 12 patients had LAD lesions and 41 had RCA lesions, stenosis ≥50% occurred in 66.7% (8/12) and 43.9% (18/41) of these lesions, respectively ( P>0.05). Conclusions:Variant angina pectoris syncope predominantly affects middle-aged males. Bradyarrhythmias triggered by RCA spasm are a common cause, while the incidence of syncope shows no significant correlation with the degree of coronary artery stenostic lesion, whether in the LAD or the RCA.

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

PURPOSE: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. METHODS: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1 - L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. RESULTS: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (F_z) of THOR-AV and THUMS changed in the similar trend. The maximum F_z ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (M_y) and the time when the maximum M_y occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of M_y measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. CONCLUSION The F_z of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on F_z. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map M_y directly because they are very different in ATD and HBM. The M_y of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.
Humans ; Lumbar Vertebrae/injuries* ; Finite Element Analysis ; Biomechanical Phenomena ; Manikins ; Spinal Injuries/physiopathology*

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People