OBJECTIVE: To evaluate the dynamic changes of glucocorticoid (GC) dose and the feasibility of GC discontinuation in rheumatoid arthritis (RA) patients under the background of Chinese medicine (CM). METHODS: This multicenter retrospective cohort study included 1,196 RA patients enrolled in the China Rheumatoid Arthritis Registry of Patients with Chinese Medicine (CERTAIN) from September 1, 2019 to December 4, 2023, who initiated GC therapy. Participants were divided into the Western medicine (WM) and integrative medicine (IM, combination of CM and WM) groups based on medication regimen. Follow-up was performed at least every 3 months to assess dynamic changes in GC dose. Changes in GC dose were analyzed by generalized estimator equation, the probability of GC discontinuation was assessed using Kaplan-Meier curve, and predictors of GC discontinuation were analyzed by Cox regression. Patients with <12 months of follow-up were excluded for the sensitivity analysis. RESULTS: Among 1,196 patients (85.4% female; median age 56.4 years), 880 (73.6%) received IM. Over a median 12-month follow-up, 34.3% (410 cases) discontinued GC, with significantly higher rates in the IM group (40.8% vs. 16.1% in WM; P<0.05). GC dose declined progressively, with IM patients demonstrating faster reductions (median 3.75 mg vs. 5.00 mg in WM at 12 months; P<0.05). Multivariate Cox analysis identified age <60 years [P<0.001, hazard ratios (HR)=2.142, 95% confidence interval (CI): 1.523-3.012], IM therapy (P=0.001, HR=2.175, 95% CI: 1.369-3.456), baseline GC dose ⩽7.5 mg (P=0.003, HR=1.637, 95% CI: 1.177-2.275), and absence of non-steroidal anti-inflammatory drugs use (P=0.001, HR=2.546, 95% CI: 1.432-4.527) as significant predictors of GC discontinuation. Sensitivity analysis (545 cases) confirmed these findings. CONCLUSIONS RA patients receiving CM face difficulties in following guideline-recommended GC discontinuation protocols. IM can promote GC discontinuation and is a promising strategy to reduce GC dependency in RA management. (Trial registration: ClinicalTrials.gov, No. NCT05219214).
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; Arthritis, Rheumatoid/drug therapy* ; Glucocorticoids/therapeutic use* ; Medicine, Chinese Traditional ; Retrospective Studies

Fifty whitespotted bamboo sharks (Chiloscyllium playgiosum) of both sexes were used to establish a large capacity variable domain of the new antigen receptor (VNAR) library with a total capacity of over 10⁹ colony-forming units (CFU). It was applied to screen VNARs against human serum albumin (HSA) and human transcription factor EB (TFEB), respectively. Meanwhile, VNAR libraries specific to HSA and TFEB with capacities above 10⁸ CFU were obtained following conventional immunization. These two approaches were systematically studied in terms of VNAR yield and composition. By comparing the VNAR sequences obtained from naïve and antigen-immunized libraries, we found that the complementary-determining region 3 (CDR3) of the former differs in composition from that of the latter. It shares a higher degree of homology with the naïve library. Meanwhile, the binding efficiency assessed by ELISA is also different between the naïve and antigen-immunized libraries. The binding of VNARs from the TFEB-immunized library appeared to surpass that observed with the naïve libraries, whereas the performance of VNARs from the HSA-immunized library indicated that both the immunized and naïve libraries for HSA had positive binding responses in polyclonal and monoclonal ELISA. The results are useful to develop novel diagnostic and therapeutic products based on shark VNARs.

OBJECTIVE: A new three-dimensional(3D) classification of posterior cruciate ligament (PCL) tibial avulsion fracture based on computed tomography(CT) features was established and the significance in clinical treatment was explored in this study. METHODS: From May 2013 to November 2023, 43 cases of PCL tibial avulsion fracture in the Second Hospital of Jilin University were analyzed retrospectively, including 29 males and 14 females, aged (34.3±8.5) years. According to traditional Meyers and McKeever classification, 3 cases were typeⅠ;2 cases of typeⅡ;38 cases were type Ⅲ. Based on the characteristics of CT images, 43 patients were given specific treatment strategies and followed up to evaluate the curative effect. According to the degree of fracture displacement, involved range and the integrity of fracture block demonstrated by CT images, the new three-dimensional classification of PCL avulsion fracture was established. Kappa coefficient was used for consistency test. RESULTS: A new 3D classification of PCL tibial avulsion fracture was established. TypeⅠwas the non-displaced fracture (displacement degree ≤3 mm), in which typeⅠa was the avulsion range limited in the posterior intercondylar fossa, and Ib was the avulsion range beyond the posterior intercondylar fossa. TypeⅡrepresented the displaced fracture in the posterior intercondylar fossa (avulsion limited to the posterior intercondylar fossa and fracture displacement>3 mm), in which typeⅡa represented a slight displacement with a intact broken block and the posterior elevation of the avulsion (hinge mechanism), typeⅡb represented the complete separation of fracture ends with a intact fracture block, and typeⅡc was the comminuted fracture. Type Ⅲ was the displaced fracture beyond the posterior intercondylar fossa (avulsion involving the articular surface of the tibial plateau or the intercondylar ridge and the degree of displacement > 3 mm), among which type Ⅲa was the simple fracture with intact broken block, type Ⅲb represented the comminuted fracture, and type Ⅲc was the complex fracture with tibial plateau fracture. According to this new 3D classification, 43 patients were classified as type Ia in 2 cases and typeⅠb in 1 case;typeⅡa in 2 cases, typeⅡb in 15 cases and typeⅡc in 7 cases;type Ⅲa in 2 cases, type Ⅲb in 5 cases and type Ⅲc in 9 cases. All the 43 cases in this study achieved bone union. At the last follow-up, according to the hospital for special surgery knee score(HSS)evaluation system for the knee joint function, 27 cases were excellent, 11 cases were good, 5 cases were fair. The average Kappa value of inter-observer reliability in the first stage was 0.793, and the second stage was 0.855. The average Kappa value of the whole stage was 0.839, indicating high level of consistency. The average Kappa value of intra-observer reliability was 0.893, indicating high level of consistency. CONCLUSION The 3D classification of PCL tibial avulsion fracture is intuitive, demonstrating a high level of reliability. It has a certain guiding significance for the selection of clinical treatment methods, and it is suggested to be promoted and applied as a new classification system in clinical practice.
Humans ; Male ; Female ; Posterior Cruciate Ligament/surgery* ; Adult ; Tibial Fractures/classification* ; Tomography, X-Ray Computed ; Middle Aged ; Retrospective Studies ; Fractures, Avulsion/classification* ; Imaging, Three-Dimensional ; Young Adult

Primary ciliary dyskinesia (PCD) is a clinically rare, genetically and phenotypically heterogeneous condition characterized by chronic respiratory tract infections, male infertility, tympanitis, and laterality abnormalities. PCD is typically resulted from variants in genes encoding assembly or structural proteins that are indispensable for the movement of motile cilia. Here, we identified a novel nonsense mutation, c.466G>T, in cilia- and flagella-associated protein 300 ( CFAP300 ) resulting in a stop codon (p.Glu156*) through whole-exome sequencing (WES). The proband had a PCD phenotype with laterality defects and immotile sperm flagella displaying a combined loss of the inner dynein arm (IDA) and outer dynein arm (ODA). Bioinformatic programs predicted that the mutation is deleterious. Successful pregnancy was achieved through intracytoplasmic sperm injection (ICSI). Our results expand the spectrum of CFAP300 variants in PCD and provide reproductive guidance for infertile couples suffering from PCD caused by them.
Adult ; Female ; Humans ; Male ; Pregnancy ; China ; Ciliary Motility Disorders/genetics* ; Codon, Nonsense ; East Asian People/genetics* ; Exome Sequencing ; Homozygote ; Infertility, Male/genetics* ; Kartagener Syndrome/genetics* ; Pedigree ; Sperm Injections, Intracytoplasmic ; Cytoskeletal Proteins/genetics*

Objective To evaluate the efficacy and safety of systemic thrombolysis(ST)and standard anticoagulation(SA)in the treatment of lower extremity fracture complicated with distal deep vein thrombosis(DDVT).Methods We retrospectively analyzed the clinical data of 60 patients with lower extremity fracture complicated with DDVT treated from January 2021 to December 2023.When the lower limb venography indicated a calf thrombus burden score ≥3 points,a retrievable inferior vena cava filter(IVCF)was successfully placed in the healthy femoral vein before orthopedic surgery.The patients who received further anticoagulant or thrombolytic therapy after surgery were allocated into a ST group(n=30,urokinase ST and SA)and a SA group(n=30,only SA).The two groups were compared in terms of calf thrombus burden score,thrombus dissolution rate,IVCF placement time,IVCF retrieval rate,intercepted thrombi,hemoglobin level,platelet count,D-dimer level,and complications.Results There was no statistically significant difference in the calf thrombus burden score between the two groups before treatment(P=0.431).However,after treatment,the scores in both groups decreased(both P<0.001),with the ST group showing lower score than the SA group(P=0.002).The thrombus dissolution rate in the ST group was higher than that in the SA group(P<0.001).There was no statistically significant difference in the IVCF placement time between the two groups(P=0.359),and the IVCF retrieval rate was 100% in both groups.The ST group had fewer intercepted thrombi than the SA group(P=0.002).There was no statistically significant difference in hemoglobin level(P=0.238),platelet count(P=0.914),or D-dimer level(P=0.756)between the two groups before treatment.However,after treatment,both groups showed an increase in platelet count(both P<0.001)and a decrease in D-dimer level(both P<0.001).There was no statistically significant difference in the occurrence of complications between the two groups(P=0.704).Conclusions Both SA and ST demonstrate safety and efficacy in the treatment of lower extremity fractures complicated with DDVT,serving as valuable options for clinical application.Compared with SA,ST not only enhances the thrombus dissolution in the calf but also mitigates the risk of thrombosis associated with IVCF.
Humans ; Venous Thrombosis/therapy* ; Retrospective Studies ; Thrombolytic Therapy/methods* ; Male ; Female ; Middle Aged ; Fractures, Bone/complications* ; Lower Extremity/injuries* ; Anticoagulants/therapeutic use* ; Aged ; Treatment Outcome ; Adult

On the basis of that the fluorescence wavelength of copper nanoclusters(CuNCs)could cover the entire visible region,multicolor fluorescent CuNCs/starch composites were prepared and applied in fingermark development.With L-glutathione as the reducing agent and protective ligand,blue emissive and orange emissive CuNCs solutions were obtained in alkaline solutions at 90℃and 25℃,respectively.With the aggregation-induced emission effect induced by ethanol as a poor solvent,the fluorescence of orange emissive CuNCs with a higher intensity was achieved in an ethanol-water solution.With ascorbic acid as the reducing agent and 3-mercaptopropionic acid as the protective agent,green emissive CuNCs solution was prepared in an acid solution.Particle morphologies,chemical compositions and optical properties of these three CuNCs above were investigated using physical characterization and spectroscopic analysis,indicating that well-dispersed CuNCs had excellent photoluminescent properties.These CuNCs solutions were combined with starch to form composite powders by simply drying.The influences of the type of CuNCs and the ratio of CuNCs to starch on the emission wavelength and fluorescence intensity of the products were studied.The obtained CuNCs/starch composites could emit blue,green and orange fluorescence under 365 nm ultraviolet light,respectively,which were suitable for fingermark development.Minutiae and partial level-3 features of latent fingermarks could be effectively developed.High-quality fluorescence fingermark images would be captured using appropriate optical filters to eliminate background interference of various substrates.

A deep learning-based method for recognizing the minutiae in fingerprint,as well as a Python programming-based evaluation system for quantifying the evidence value of fingerprint was proposed.Firstly,latent fingerprints,which were developed using a series of fluorescent nanomaterials synthesized by chemical methods,were used as unknown fingerprint(UKFP),while ink impressed fingerprints were used as known fingerprint(KFP).Then,the bifurcations and terminations in minutiae were recognized using the improved YOLOv8 deep learning model.After that,the similarity index(Sim.)of UKFP vs KFP were calculated by analyzing the angle similarity factor(α)and the curve similarity factor(β)between UKFP and KFP,meanwhile,the sensitivity index(Sen.)were calculated by analyzing the fineness factor(γ)between UKFP and KFP.The evidence value(EV)of fingerprint was thus obtained by the combination of Sim.and Sen..The calculation formulas for above evaluation factors(i.e.α,β and γ),evaluation indexes(i.e.Sim.and Sen.),and EV were also put forward.Finally,the evaluation system for quantifying the evidence value of fingerprint was established,the feasibility and reliability of this system were verified,and the external factors that impacted on Sim.,Sen.,and EV were investigated in detail.The Python-based evaluation system for quantifying the evidence value of fingerprint could achieve the goals objectively,comprehensively,accurately and efficiently,exhibiting easy operability,high efficiency,responsiveness and reliability.This research was expected to provide beneficial references for quantitatively evaluating and thoroughly developing the evidence value.

The influence of material properties on fingerprint development effects were systematically studied.Firstly,carbon dots/NaYF4 and Cu nanoclusters/starch nanocomposites respectively possessing different fluorescent intensities and dual fluorescent colors,as well as NaYF4 micro-/nano-materials exhibiting different morphologies,sizes,and surface properties were chemically synthesized and further used for latent fingerprint development.Then,the developing effects were comprehensively evaluated by visual analysis combining with spectral characterization and Python-based calculation.Finally,the influences of material properties on latent fingerprint development were quantitatively evaluated from three dimensions including contrast,sensitivity,and selectivity.The fluorescence properties of developing materials and substrates could significantly affect the developing contrast,namely,the stronger the developing signal,the higher the contrast;the weaker the background noise,the higher the contrast.The sizes and morphologies of the developing materials could respectively influence the quantity and quality of developed minutiae,and significantly affect the developing sensitivity,namely,the smaller the particle size of developing materials,the more the quantity of developed minutiae and the higher the sensitivity;the smaller the surface area of developing materials,the higher the quality of developed minutiae and the higher the sensitivity.The surface properties together with the sizes and morphologies of developing materials could influence their adsorption performances,and significantly affect the developing selectivity,namely,the stronger the specific adsorption of developing materials with fingerprint substance,and the weaker the non-specific adsorption of developing materials with substrate,the higher the selectivity.Moreover,the fingerprint development using the materials with suitable surface area and appropriate mass would have a high selectivity.

The anti-counterfeiting application of three-color fluorescent carbon dots(CDs)in high-quality inkjet printing was studied.Blue,green and red fluorescent CDs were synthesized by solvothermal method using three kinds of isomers of phenylenediamine as precursor,and ethanol-glycerol mixture as solvent.The morphology,composition,structure,and optical properties were characterized.Blue,green and red fluorescent inks were then prepared by diluting CDs with water.The dilution ratio,excitation light source and filtering method were also optimized.The optimal dilution ratio of blue,green and red fluorescent ink was 5,5 and 20,respectively.Under 365,415 and 450 nm light excitation,bright blue,green and red fluorescence from above inks could be observed by using a blue,green and red filter,respectively.These fluorescent inks were finally used for high-quality inkjet printing through monochrome printing mode and polychrome printing mode.In addition,the sensitivity and contrast of printing were quantitatively investigated.The series of three-color fluorescent inks possessed great prospects in ordinary and invisible fluorescent anti-counterfeiting application.

Objective To establish a rapid analysis method for cyanide based on a ratiometric fluores-cent probe,providing a quantitative strategy for on-site visual and rapid detection of cyanide.Methods A dual-emission ratiometric fluorescent probe(AuNCs-FL)was constructed by using bovine serum al-bumin(BSA)-stabilized gold nanoclusters(AuNCs,fluorescence emission at 660 nm)as the responsive signal unit and fluorescein(FL,emission at 515 nm)as the internal reference.Results The etching effect of cyanide on AuNCs resulted in fluorescence quenching at 660 nm,while the fluorescence inten-sity of FL at 515 nm remained unchanged,enabling a rapid response analysis of cyanide shift from red to green fluorescence.The developed probe enabled rapid analysis of cyanide within 3 min,with a limit of detection(LOD)of 3.4 mg/L and a visual detection range of 10-100 mg/L.Conclusion The AuNCs-FL fluorescent probe is structurally simple,low-cost,and easy to operate,delivering rapid and accurate results.It also avoids the interference from sulfides encountered in commercial cyanide test kits,making it suitable for the on-site rapid detection of suspected powder samples in cyanide poisoning cases.