Triclosan (TCS) and triclocarban (TCC) are widely used synthetic broad-spectrum antibacterial agents that can enter the human body through the skin, gastrointestinal tract, and other pathways. More and more studies have found that exposure to TCS and TCC can affect human health, but currently, review reports on the health effects of human exposure to TCS and TCC are limited. Therefore, this study reviewed population studies on the relationship between TCS and TCC exposure and health effects by searching the PubMed database, summarized the associated health outcomes, and elucidated the biological mechanisms. A total of 56 studies were retrieved, among which cross-sectional studies (25 studies, 44.64%) and cohort studies (25 studies, 44.64%) accounted for a relatively large proportion, while case-control studies (6 studies, 10.72%) were relatively few. Studies on TCS exposure (48 studies, 85.71%) were far more prevalent than those on TCC exposure (2 studies, 3.57%). The remaining 6 studies involved both TCS and TCC exposure. The research results revealed that TCS exposure was associated with male and female abnormal reproductive functions, fetal growth restriction, abnormal behavior development in children, obesity, gestational diabetes mellitus (GDM), and immune-related diseases. Although the results of different studies show significant differences, they have indicated that exposure to TCS is a potential risk factor for these health problems. Due to the limited number of studies, the evidence for the relationship between TCC exposure and most of the aforementioned health effects is insufficient. Population studies and in vitro and in vivo studies have shown that exposure to TCS and TCC can interfere with the microbial homeostasis, the endocrine system, oxidative stress and immune function of the body, which are potential mechanisms causing adverse health effects. In the future, large-scale prospective cohort studies, as well as in vivo and in vitro studies, are still needed to further clarify the associations between TCS and TCC exposure and health effects, and to deeply explore its mechanism of action. These efforts will provide references for clarifying the human health hazards of TCS and TCC exposure and formulating targeted prevention and control strategies.

Objective:To explore the early and mid-term efficacy of three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee.Methods:A retrospective analysis was conducted on the data of 24 patients who underwent reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee using 3D-printed customized porous prostheses at West China Hospital of Sichuan University from June 2015 to June 2021. There were 14 female cases and 10 male cases, with an average age of 28.9±16.5 years (range, 12-61 years), 12 cases at the distal end of the femur and 12 cases at the proximal end of the tibia. Tumor types: 16 cases of osteosarcoma, 4 cases of Ewing's sarcoma, 2 cases of chondrosarcoma, and 2 case of parosteal osteosarcoma. All patients were classified as Enneking stage IIB. Record the oncology results of the patients, the length of tumor segment resection, and the remaining bone length at the distal femur or proximal tibia, as well as complications, systemic metastasis and imaging changes. The bone integration at the prosthesis-bone interface was evaluated by tomosynthesis-shimadzu metal artifact reduction technology (T-SMART). Limb function was evaluated using the Musculoskeletal Tumor Society (MSTS)-93 score and knee range of motion assessment.Results:All 24 patients successfully completed the surgery and were followed up, with an average follow-up time of 51.8±12.7 months (range, 32-99 months). The length of femoral osteotomy was 241.1±66.2 mm (range, 150.6-333.4 mm), and the length of tibial osteotomy was 198.6±35.6 mm (range, 156.6-287.6 mm). The remaining bone length at the epiphyseal end around the knee joint (from the knee joint plane to the osteotomy plane of the distal femur or proximal tibia) was 52.6±11.0 mm (range, 31.1-77.5 mm). At the last follow-up, 23 patients survived tumor-free, while one patient died due to lung metastasis 54 months after the operation. One patient had prosthesis fracture 75 months after the operation, two patients had aseptic loosening 6 and 8 months after the operation, and the T-SMART of the remaining 20 patients showed that the implanted prostheses all achieved good osseointegration. At the last follow-up, the range of motion of the knee joint was 126.2°±7.5° (range, 110.0°-140.0°), and the MSTS-93 score was 26.7±1.8 points (range, 23-30 points). Among them, the MSTS-93 score of the femoral prosthesis was 26.7±1.6 points (range, 24-29 points), and the MSTS-93 score of the tibial prosthesis was 26.9±1.9 points (range, 23-30 points). The average knee range of motion was 126.2°±7.5° (range, 110°-140°), and the MSTS-93 functional score was 26.7±1.8 points (range, 23-30 points) at the last follow-up. The femoral component had an average score of 26.7±1.6 points (range, 24-29 points), while the tibial component had an average score of 26.9±1.9 points (range, 23-30 points).Conclusion:The application three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee can preserve the joint, restore limb function well, and have a low incidence of prosthesis complications, with good clinical efficacy in the early and middle stages.

Objective:To summarize the clinical characteristics of elderly patients with stage Ⅰ diffuse large B-cell lymphoma (DLBCL) and analyze the factors associated with prognosis.Methods:A case series study was conducted by retrospectively collecting clinical data from patients aged over 60 years with newly diagnosed stage Ⅰ DLBCL across 20 medical centers in Jiangsu Province, China, between June 2010 and April 2023. The involved site, classification and treatment plan were summarized. The primary endpoints were progression-free survival (PFS) and overall survival (OS). Statistical analyses were performed using the Kaplan-Meier method, and Cox regression model.Results:The study included 255 patients with a median age of 69 years, of whom 130 (51.0%) were male, 66 (25.9%) were aged ≥75 years and 26 (10.1%) had a high Charlson Comorbidity Index (CCI) score of ≥2. Extranodal involvement was observed in 163 (63.9%) patients, with the stomach (37.4%, 61/163), intestine (19.0%, 31/163), testes (11.0%, 18/163), and breast (7.4%, 12/163) being the most frequently affected sites. The non-germinal center B-cell (non-GCB) subtype was prevalent in 63.7% of patients (142/223), with no significant difference between the nodal and extranodal groups ( P=0.681). Furthermore, 73.9% (184/249) and 11.7% (29/249) of patients received the R-CHOP (rituximab, cyclophosphamide, doxorubicin, vincristine, prednisone) and R-miniCHOP regimen, respectively. The overall 3-year PFS rate was 81.5%, and the 3-year OS rate was 85.6%. Patients aged ≥75 years ( HR=2.910, 95% CI 1.565-5.408, P=0.001) and/or with a CCI score ≥2 ( HR=2.324, 95% CI 1.141-4.732, P=0.020) had a significantly poorer PFS. Incorporating age ≥75 years and CCI score ≥2 into the stage-modified international prognostic index (sm-IPI) can better stratify the prognosis of elderly patients with stage Ⅰ DLBCL. The 3-year PFS rate was 48.7% in the high-risk group versus 85.7% in the low-risk group ( P<0.001). Conclusions:Our findings show that the elderly patients with stage Ⅰ DLBCL were predominantly characterized by extranodal involvement (particularly in the stomach and intestinal tract) and non-GCB subtype. Age ≥75 years and CCI ≥2 were identified as independent prognostic factors. The newly established sm-IPI-75-CCI incorporating these factors demonstrated superior prognostic discrimination compared to conventional risk assessment systems.

Objective:To explore the risk fall death associated with compound hot extremes.Methods:This study collected data on fall deaths in Guangdong, Hunan, and Zhejiang Provinces from 2013 to 2018 and matched their exposure to meteorological data. Based on a time-stratified case-crossover design, a conditional logistic regression model embedded with a cross-basis function of the distributed lag nonlinear model was applied to estimate the risk of fall to death due to compound hot extremes.Results:Compared with regular days, compound hot extremes significantly increased the risk of death from falls ( OR=1.19, 95% CI: 1.09-1.30), and women ( OR=1.27, 95% CI: 1.11-1.45) and the elderly age 65 and above ( OR=1.24, 95% CI: 1.12-1.39) were more sensitive to compound hot extremes. The maximum duration of compound hot extremes was 7 days, and the maximum intensity was 6.2 ℃, and the duration and intensity were proportional to the risk of death from falls. The risk of death from falls increased by 12% ( OR=1.12, 95% CI: 1.06-1.18) each day, increasing in duration after linearization. The risk of death from falls increased by 16% ( OR=1.16, 95% CI: 1.10-1.22) for each 1 ℃ increase in linearized intensity. Conclusion:Compound hot extremes increase the risk of death cases from falls.

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

The genome tagging project (GTP) plays a pivotal role in addressing a critical gap in the understanding of protein functions. Within this framework, we successfully generated a human influenza hemagglutinin-tagged sperm-specific protein 411 (HA-tagged Ssp411) mouse model. This model is instrumental in probing the expression and function of Ssp411. Our research revealed that Ssp411 is expressed in the round spermatids, elongating spermatids, elongated spermatids, and epididymal spermatozoa. The comprehensive examination of the distribution of Ssp411 in these germ cells offers new perspectives on its involvement in spermiogenesis. Nevertheless, rigorous further inquiry is imperative to elucidate the precise mechanistic underpinnings of these functions. Ssp411 is not detectable in metaphase II (MII) oocytes, zygotes, or 2-cell stage embryos, highlighting its intricate role in early embryonic development. These findings not only advance our understanding of the role of Ssp411 in reproductive physiology but also significantly contribute to the overarching goals of the GTP, fostering groundbreaking advancements in the fields of spermiogenesis and reproductive biology.
Animals ; Female ; Humans ; Male ; Mice ; Spermatids/metabolism* ; Spermatogenesis/physiology* ; Spermatozoa/metabolism* ; Thioredoxins/genetics*

BACKGROUND: Physical inactivity is a significant yet underappreciated risk factor for cardiovascular disease (CVD), particularly among older adults. The aim of this study was to analyze the global burden of CVD attributable to physical inactivity in individuals aged 70 years and older from 1990 to 2021 using the Global Burden of Disease data. METHODS: We assessed trends in disability-adjusted life years (DALYs) and deaths, decomposed changes into population growth, aging, and epidemiological factors, and examined health inequalities across sociodemographic index (SDI) regions. RESULTS: From 1990 to 2021, a substantial rise in DALYs was observed, especially in low and middle SDI regions, with a 120.06% increase in the low SDI region, but a 23.10% decline in the high SDI region. Decomposition analysis identified population aging and growth as primary drivers for the burden, contributing 66.39% and 83.56% to the increase in middle and low SDI regions, respectively. By contrast, epidemiological improvements alleviated burden in the high SDI region (54.91%). Gender disparities persisted, with women experiencing a higher burden. Inequality analysis indicated a shift in CVD burden towards the low SDI region, with declining concentration indices for DALYs (-0.03 to -0.13) and deaths (-0.07 to -0.15). The Bayesian age-period-cohort projections suggest continued increases in DALYs and deaths through 2050, with women disproportionately affected. CONCLUSIONS These findings highlight the urgent need for targeted interventions promoting physical activity, improving healthcare access, and implementing region-specific prevention strategies.

OBJECTIVE: To evaluate the effect and safety of Chinese medicine (CM) Fuzheng Huazhuo Decoction (FHD) in treating patients with coronavirus disease 2019 (COVID-19) who persistently tested positive for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). METHODS: This retrospective cohort study was conducted at Shanghai New International Expo Center shelter hospital in China between April 1 and May 30, 2022. Patients diagnosed as COVID-19 with persistently positive SARS-CoV-2 reverse transcription-polymerase chain reaction (RT-PCR) test results for ⩾8 days after diagnosis were enrolled. Patients in the control group received conventional Western medicine (WM) treatment, while those in the FHD group received conventional WM plus FHD for at least 3 days. The primary outcome was viral clearance time. Secondary outcomes included negative conversion rate within 14 days, length of hospital stay, cycle threshold (Ct) values of the open reading frame 1ab (ORF1ab) and nucleocapsid protein (N) genes, and incidence of new-onset symptoms during hospitalization. Adverse events (AEs) that occurred during the study period were recorded. RESULTS: A total of 1,765 eligible patients were enrolled in this study (546 in the FHD group and 1,219 in the control group). Compared with the control group, patients receiving FHD treatment showed shorter viral clearance time for nucleic acids [hazard ratio (HR): 1.500, 95% confidence interval (CI): 1.353-1.664, P<0.001] and hospital stays (HR: 1.371, 95% CI: 1.238-1.519, P<0.001), and a higher negative conversion rate within 14 days (96.2% vs. 82.6%, P<0.001). The incidence of new-onset symptoms was 59.5% in the FHD group, similar to 57.8% in the control group (P>0.05). The Ct values of ORF1ab and N genes increased more rapidly over time in the FHD group than those in the control group post-randomization (ORF1ab gene: β =0.436±0.053, P<0.001; N gene: β =0.415 ±0.053, P<0.001). The incidence of AEs in the FHD group was lower than that in the control group (24.2% vs. 35.4%, P<0.001). No serious AEs were observed. CONCLUSION FHD was effective and safe for patients with persistently positive SARS-CoV-2 PCR tests. (Registration No. ChiCTR2200063956).
Humans ; Drugs, Chinese Herbal/adverse effects* ; Retrospective Studies ; Male ; Female ; Middle Aged ; COVID-19 Drug Treatment ; SARS-CoV-2/drug effects* ; COVID-19/virology* ; Adult ; Aged ; Treatment Outcome

Osteoarthritis (OA) causes chronic pain that significantly impairs quality of life, with current treatments often proving insufficient and accompanied by adverse effects. Recent research has identified the dorsal root ganglion (DRG) and its resident macrophages as crucial mediators of chronic OA pain through neuroinflammation driven by macrophage polarization. We present a novel injectable thermo-sensitive hydrogel system, KAF@PLEL, designed to deliver an anti-inflammatory peptide (KAF) specifically to the DRG. This biodegradable hydrogel enables sustained KAF release, promoting the reprogramming of DRG macrophages from pro-inflammatory to anti-inflammatory phenotypes. Through comprehensive in vitro and in vivo studies, we evaluated the hydrogel's biocompatibility, effects on macrophage polarization, and therapeutic efficacy in chronic OA pain management. The system demonstrated significant capabilities in preserving macrophage mitochondrial function, suppressing neuroinflammation, alleviating chronic OA pain, reducing cartilage degradation, and improving motor function in OA rat models. The sustained-release properties of KAF@PLEL enabled prolonged therapeutic effects while minimizing systemic exposure and side effects. These findings suggest that KAF@PLEL represents a promising therapeutic approach for improving outcomes in OA patients through targeted, sustained treatment.