Objective:To investigate the survival outcomes and prognostic factors in patients undergoing radical resection for pancreatic body and tail cancer.Methods:A retrospective case series study was conducted on 992 patients who underwent radical resection for pancreatic body and tail cancer at the Pancreatic Center of the First Affiliated Hospital of Nanjing Medical University from January 2016 to June 2024. In this study, 577 (58.2%) were male and 415 (41.8%) were female,with an age of (65±9) years (range: 26 to 86 years). Follow-up continued until June 2024. Survival rates were estimated using the Kaplan-Meier method,and prognostic factors were identified using univariate and multivariate Cox proportional hazards models.Results:Among 992 patients,open surgery was the predominant approach (89.1%, 884/992), and radical antegrade modular pancreatosplenectomy (RAMPS) was performed in 317 patients (32.0%). Combined organ resection,venous resection,and arterial resection were performed in 23.5%, 9.3%,and 11.2% of patients,respectively. The rates of R0, R1-1 mm, and R1-direct resections were 49.8% (494/992),41.5% (412/992), and 8.7% (86/992),respectively. Stage ⅡB was the most common TNM stage (32.2%,319/992). A total of 801 patients (80.8%) received adjuvant chemotherapy. The median follow-up period was 32.0(8.8) months(range:3.2 to 105.3 months),during which 508 patients (51.2%) died. The overall median survival (OS) was 26.4 months,with 1-,3-, and 5-year survival rates of 79.0%,40.0%, and 29.0%, respectively. In the recent five years (from 2020 to 2024), the median OS improved significantly to 34.1 months compared to 20.0 months from 2016 to 2019 ( P<0.01). Histological subtype analysis showed that the median OS time was 26.7 months for pancreatic ductal adenocarcinoma (PDAC, n=855),58.9 months for invasive intraductal papillary mucinous carcinoma (IPMC, n=32),and 15.7 months for adenosquamous carcinoma of pancreas (ASCP, n=73) ( P=0.001). Among PDAC patients, adjuvant chemotherapy significantly improved survival (29.1 months vs. 14.4 months, P<0.01);in IPMC patients, adjuvant chemotherapy also extended survival (65.7 months vs. 58.9 months, P=0.047). Although ASCP patients receiving chemotherapy had a longer median OS time than those without (18.8 months vs. 8.9 months),the difference was not statistically significant ( P=0.151). Multivariate Cox regression analysis in PDAC patients indicated that adjuvant chemotherapy, R0 resection, T stage,N stage,and tumor differentiation were independent prognostic factors ( P<0.01). The median OS time by TNM stage was:not reached for stage ⅠA, 51.6 months for ⅠB, 25.5 months for ⅡA, 23.7 months for ⅡB, 23.0 months for Ⅲ, and 14.4 months for Ⅳ. The median OS time for R0,R1-1 mm,and R1-direct resections was 34.1,24.7,and 15.7 months,respectively ( P<0.01). Conclusion:Adjuvant chemotherapy,R0 resection,tumor stage,and differentiation are independent prognostic factors for pancreatic body and tail cancer.

Objective:To investigate the survival outcomes and prognostic factors in patients undergoing radical resection for pancreatic body and tail cancer.Methods:A retrospective case series study was conducted on 992 patients who underwent radical resection for pancreatic body and tail cancer at the Pancreatic Center of the First Affiliated Hospital of Nanjing Medical University from January 2016 to June 2024. In this study, 577 (58.2%) were male and 415 (41.8%) were female,with an age of (65±9) years (range: 26 to 86 years). Follow-up continued until June 2024. Survival rates were estimated using the Kaplan-Meier method,and prognostic factors were identified using univariate and multivariate Cox proportional hazards models.Results:Among 992 patients,open surgery was the predominant approach (89.1%, 884/992), and radical antegrade modular pancreatosplenectomy (RAMPS) was performed in 317 patients (32.0%). Combined organ resection,venous resection,and arterial resection were performed in 23.5%, 9.3%,and 11.2% of patients,respectively. The rates of R0, R1-1 mm, and R1-direct resections were 49.8% (494/992),41.5% (412/992), and 8.7% (86/992),respectively. Stage ⅡB was the most common TNM stage (32.2%,319/992). A total of 801 patients (80.8%) received adjuvant chemotherapy. The median follow-up period was 32.0(8.8) months(range:3.2 to 105.3 months),during which 508 patients (51.2%) died. The overall median survival (OS) was 26.4 months,with 1-,3-, and 5-year survival rates of 79.0%,40.0%, and 29.0%, respectively. In the recent five years (from 2020 to 2024), the median OS improved significantly to 34.1 months compared to 20.0 months from 2016 to 2019 ( P<0.01). Histological subtype analysis showed that the median OS time was 26.7 months for pancreatic ductal adenocarcinoma (PDAC, n=855),58.9 months for invasive intraductal papillary mucinous carcinoma (IPMC, n=32),and 15.7 months for adenosquamous carcinoma of pancreas (ASCP, n=73) ( P=0.001). Among PDAC patients, adjuvant chemotherapy significantly improved survival (29.1 months vs. 14.4 months, P<0.01);in IPMC patients, adjuvant chemotherapy also extended survival (65.7 months vs. 58.9 months, P=0.047). Although ASCP patients receiving chemotherapy had a longer median OS time than those without (18.8 months vs. 8.9 months),the difference was not statistically significant ( P=0.151). Multivariate Cox regression analysis in PDAC patients indicated that adjuvant chemotherapy, R0 resection, T stage,N stage,and tumor differentiation were independent prognostic factors ( P<0.01). The median OS time by TNM stage was:not reached for stage ⅠA, 51.6 months for ⅠB, 25.5 months for ⅡA, 23.7 months for ⅡB, 23.0 months for Ⅲ, and 14.4 months for Ⅳ. The median OS time for R0,R1-1 mm,and R1-direct resections was 34.1,24.7,and 15.7 months,respectively ( P<0.01). Conclusion:Adjuvant chemotherapy,R0 resection,tumor stage,and differentiation are independent prognostic factors for pancreatic body and tail cancer.

Background: s/Aims: Distal pancreatectomy with splenectomy (DPS) is a common surgical procedure for pancreatic body cancer.However, spleen-preserving distal pancreatectomy (SPDP) utilizing the Warshaw technique (WT) in malignancies is generally not favored due to concerns about inadequate resection. This study aims to assess the feasibility and oncologic outcomes of employing SPDP with WT in pancreatic body cancer. Methods: We conducted a retrospective analysis comparing 21 SPDP patients with 63 DPS patients matched by propensity score from January 2018 to November 2022. Clinical outcomes and follow-up data were analyzed using R. Results: Both groups exhibited similar demographic, intraoperative, and pathological characteristics, with the exception of a reduced number of total lymph nodes (p = 0.006) in the SPDP group. There were no significant differences in the rates of postoperative complications, recurrence, or metastasis. Local recurrence predominantly occurred in the central region as opposed to the spleen region.There were no cases of isolated recurrences in the splenic region. Median overall survival and recurrence-free survival times were 51.5 months for SPDP vs 30.5 months for DPS and 18.7 months vs 16.8 months, respectively (p > 0.05). The incidence of partial splenic infarction and left-side portal hypertension in the SPDP group was 28.6% (6/21) and 9.5% (2/21), respectively, without necessitating splenic abscess puncture, splenectomy, or causing bleeding from perigastric varices. Conclusions SPDP did not negatively impact local recurrence or survival rates in selected pancreatic body cancer patients. Further studies are necessary for validation.

Objective:To observe the early clinical efficacy of 3D-printed modular supporting prosthesis for reconstruction of lacunar bone defect caused by giant cell tumor of the distal femur.Methods:From May 2018 to July 2023, a total of 9 patients with giant cell tumor of the distal femur were treated with 3D-printed modular supporting prosthesis to reconstruct lacunar bone defects in the Department of Orthopedics, West China Hospital, Sichuan University. There were 4 males and 5 females, aged 30.8±6.1 years (range, 24-44 years), 5 cases on the left side, 4 cases on the right side, 2 cases of Campanacci grade I, 7 cases of Campanacci grade II. The anteroposterior and lateral X-ray films and T-SMART tomosynthesis imaging of the knee joint were taken to observe the bone graft healing and osseointegration after operation. Musculoskeletal Tumor Society (MSTS)-93 was used to evaluate knee function, and visual analogue scale (VAS) was used to evaluate knee pain.Results:All patients were successfully operated and followed up for an average of 30.8±7.5 months (range, 18-42 months). The operation time was 124.2±23.6 min, and the intraoperative blood loss was 105.6±17.4 ml. All autografts showed bony union at the graft-host junction, and the healing time was 3.3±0.4 months (range, 3.0-4.0 months). At 6 months after surgery, T-SMART tomosynthesis imaging showed that the gap between the prosthesis-bone interface was less than 1 mm in all patients. At the last follow-up, the thickness of residual subchondral bone was 5.7±1.3 mm, which was greater than that before operation 2.2±0.8 mm, and the difference was statistically significant ( t=10.823, P<0.001). At the last follow-up, the score of MSTS-93 was 26.7±2.4, which was higher than that before operation 18.8±3.7, and the difference was statistically significant ( t=5.367, P<0.001). At the last follow-up, the range of motion of the knee joint was 122.8°±9.1°, which was higher than that before operation 108.3°±6.1°, and the difference was statistically significant ( t=3.970, P<0.001). All patients were able to walk normally, go up and down stairs and other daily activities, and 7 patients were able to complete squats. At the last follow-up, there was no local tumor recurrence, distant metastasis, death, joint infection, pain (VAS score was 0), delayed wound healing, joint degeneration, prosthesis loosening or articular surface collapse. Conclusion:Reconstruction of lacunar bone defect caused by giant cell tumor of distal femur with 3D-printed modular supporting prosthesis can effectively improve knee joint function and osseointegration, and the short-term clinical results are satisfactory.

Objective:To explore the early and mid-term efficacy of three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee.Methods:A retrospective analysis was conducted on the data of 24 patients who underwent reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee using 3D-printed customized porous prostheses at West China Hospital of Sichuan University from June 2015 to June 2021. There were 14 female cases and 10 male cases, with an average age of 28.9±16.5 years (range, 12-61 years), 12 cases at the distal end of the femur and 12 cases at the proximal end of the tibia. Tumor types: 16 cases of osteosarcoma, 4 cases of Ewing's sarcoma, 2 cases of chondrosarcoma, and 2 case of parosteal osteosarcoma. All patients were classified as Enneking stage IIB. Record the oncology results of the patients, the length of tumor segment resection, and the remaining bone length at the distal femur or proximal tibia, as well as complications, systemic metastasis and imaging changes. The bone integration at the prosthesis-bone interface was evaluated by tomosynthesis-shimadzu metal artifact reduction technology (T-SMART). Limb function was evaluated using the Musculoskeletal Tumor Society (MSTS)-93 score and knee range of motion assessment.Results:All 24 patients successfully completed the surgery and were followed up, with an average follow-up time of 51.8±12.7 months (range, 32-99 months). The length of femoral osteotomy was 241.1±66.2 mm (range, 150.6-333.4 mm), and the length of tibial osteotomy was 198.6±35.6 mm (range, 156.6-287.6 mm). The remaining bone length at the epiphyseal end around the knee joint (from the knee joint plane to the osteotomy plane of the distal femur or proximal tibia) was 52.6±11.0 mm (range, 31.1-77.5 mm). At the last follow-up, 23 patients survived tumor-free, while one patient died due to lung metastasis 54 months after the operation. One patient had prosthesis fracture 75 months after the operation, two patients had aseptic loosening 6 and 8 months after the operation, and the T-SMART of the remaining 20 patients showed that the implanted prostheses all achieved good osseointegration. At the last follow-up, the range of motion of the knee joint was 126.2°±7.5° (range, 110.0°-140.0°), and the MSTS-93 score was 26.7±1.8 points (range, 23-30 points). Among them, the MSTS-93 score of the femoral prosthesis was 26.7±1.6 points (range, 24-29 points), and the MSTS-93 score of the tibial prosthesis was 26.9±1.9 points (range, 23-30 points). The average knee range of motion was 126.2°±7.5° (range, 110°-140°), and the MSTS-93 functional score was 26.7±1.8 points (range, 23-30 points) at the last follow-up. The femoral component had an average score of 26.7±1.6 points (range, 24-29 points), while the tibial component had an average score of 26.9±1.9 points (range, 23-30 points).Conclusion:The application three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee can preserve the joint, restore limb function well, and have a low incidence of prosthesis complications, with good clinical efficacy in the early and middle stages.

Pressure ulcer is a common complication of long-term bed rest in intensive care unit(ICU)patients,which can increase the risk of infection and prolong ICU hospitalization.They are an important indicator of patient safety and nursing quality in medical institutions.Early prevention of pressure ulcer is an important means of controlling their development.At present,the prevention of pressure ulcer mainly involves timed flipping and the use of pressure reducing devices.However,during the flipping process,it often requires two or more nursing staff to complete,which increases the workload and also exacerbates the occurrence of occupational lower back pain among nursing staff.In addition,existing pressure reducing devices still have certain limitations in use,and their functions are single,often requiring the combination of multiple tools to increase material and financial resources.Based on this,the research team from the department of critical care medicine of Hospital of Chengdu University of Traditional Chinese Medicine,has designed a nursing device for preventing pressure ulcer in critically ill patients,and has obtained a National Utility Model Patent of China(Patent Number:ZL 202320609787.6).It has several inflation components and connecting structures.The inflation components are equipped with a connected air inlet,a connected air outlet,and a discharge port on the side;the inflatable components are fitted together and can be detachably connected through a connecting structure.The connected air inlet of one inflatable component corresponds to the connected air outlet of adjacent inflatable components.This device is connected by multiple inflation components,which lower or raise the height of the airbag through inflation and deflation,adjust the pressure on various parts of the patient's body,and solve the problem of labor-intensive and heavy workload in nursing work;In addition,multiple inflatable components can be detachably connected to form an inflatable mattress.When in use,the number of inflatable component connections can be selected according to the specific needs of different patients or nursing areas.The device is easy to operate,flexible in combination,and suitable for timed flipping pressure reduction regulation in pressure ulcer high-risk areas under various postures.It has good clinical application value.

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

Objective The study aims to investigate the immunological functions of the nucleocapsid (N) protein of the novel coronavirus Omicron (BA.1, BA.2) and evaluate the differences among different N proteins of mutant strains in immunogenicity. Methods By aligning sequences, the mutation sites of the Omicron (BA.1, BA.2) N protein relative to prototype strain of the novel coronavirus (Wuhan-Hu-1) were determined. The pET-28a-N-Wuhan-Hu-1 plasmid was used as template to construct pET-28a-BA.1/BA.2-N through single point mutation or homologous recombination. The three kinds of N protein were expressed in prokaryotic system, purified through Ni-NTA affinity chromatography, and then immunized into mice. The titer and reactivity of the polyclonal antibody, as well as the expression level of IL-1β and IFN-γ in mouse spleen cells, were detected using indirect ELISA and Western blot assay. Results The constructed prokaryotic expression plasmids were successfully used to express the Wuhan-Hu-1 N, BA.1 N, and BA.2 N proteins in E.coli BL21(DE3) at 37 DegreesCelsius for 4 hours. The indirect ELISA test showed that the titers of polyclonal antibody prepared by three N proteins were all 1:51 200. All three N proteins can increase the expression of IFN-γ and IL-1β cytokines, but the effect of Omicron N protein in activing two cytokines was more obvious than that of Wuhan-Hu-1 N protein. Conclusion The study obtained three new coronavirus N proteins and polyclonal antibodies, and confirmed that mutations in the amino acid sites of the N protein can affect its immunogenicity. This provides a basis for developing rapid diagnostic methods targeting N protein of different novel coronavirus variants.
Animals ; Mice ; SARS-CoV-2/genetics* ; Coronavirus Nucleocapsid Proteins/immunology* ; Nucleocapsid Proteins/isolation & purification* ; COVID-19/immunology* ; Antibodies, Viral/immunology* ; Mice, Inbred BALB C ; Interferon-gamma/metabolism* ; Interleukin-1beta/metabolism* ; Female ; Escherichia coli/metabolism* ; Mutation ; Humans

Acute kidney injury (AKI) has high morbidity and mortality, but effective clinical drugs and management are lacking. Previous studies have suggested that macrophages play a crucial role in the inflammatory response to AKI and may serve as potential therapeutic targets. Emerging evidence has highlighted the importance of forkhead box protein O1 (FoxO1) in mediating macrophage activation and polarization in various diseases, but the specific mechanisms by which FoxO1 regulates macrophages during AKI remain unclear. The present study aimed to investigate the role of FoxO1 in macrophages in the pathogenesis of AKI. We observed a significant upregulation of FoxO1 in kidney macrophages following ischemia-reperfusion (I/R) injury. Additionally, our findings demonstrated that the administration of FoxO1 inhibitor AS1842856-encapsulated liposome (AS-Lipo), mainly acting on macrophages, effectively mitigated renal injury induced by I/R injury in mice. By generating myeloid-specific FoxO1-knockout mice, we further observed that the deficiency of FoxO1 in myeloid cells protected against I/R injury-induced AKI. Furthermore, our study provided evidence of FoxO1's pivotal role in macrophage chemotaxis, inflammation, and migration. Moreover, the impact of FoxO1 on the regulation of macrophage migration was mediated through RhoA guanine nucleotide exchange factor 1 (ARHGEF1), indicating that ARHGEF1 may serve as a potential intermediary between FoxO1 and the activity of the RhoA pathway. Consequently, our findings propose that FoxO1 plays a crucial role as a mediator and biomarker in the context of AKI. Targeting macrophage FoxO1 pharmacologically could potentially offer a promising therapeutic approach for AKI.