A 71-year-old man with undifferentiated sarcoma was treated with palliative first-line regimen(epirubicin,anlotinib and penpulimab)for 6 cycles and maintained with anlotinib and penpulimab for 30 cycles.He was admitted to the hospital due to chest pain 25 months after the first treatment.The laboratory examination showed cardiac troponin T 1.26 ng·mL-1,N terminal pro B type natriuretic peptide 8,545 pg·mL-1,coronary computed tomography angiography(CTA)showed non-calcified plaque in the left proximal anterior descending branch,severe lumen stenosis,nearly complete occlusion.Emergency CTA was performed on the same day,showing 50％stenosis of the distal left main coronary artery(LMCA);95％stenosis of the left anterior descending(LAD)branch ostium,the LAD branch was medium-sized and showed no stenosis;50％stenosis of the left circumflex branch(LCx),and a cardiac stent was implanted into the LAD branch.The patient has recovered after coronary artery stent implantation.Naranjo's Assessment Scale was used to evaluate the association of suspected drugs,the acute myocardial infarction of this patient was likely associated with the combination of penpulimab and anlotinib.Myocardial infarction is a rare but severe adverse drug reaction of anti-tumor treatment.This article summarizes the related risks and treatment measures to provide a reference for clinical medication safety.

Objective To screen the prescription,preparation,quality evaluation of Ganoderma lucidum extract nano-emulsion(GLEN)and study its anti-skin aging effect.Methods The emulsifier and oil phase of the nano-emulsion were preliminarily screened by solubility method.The pseudo-ternary phase diagram method was used to screen the nano-emulsions,and the prepared GLEN were evaluated for quality in terms of the appearance,particle size,structure,drug loading,stability and skin safety.A mouse skin aging model was constructed by injecting D-galactose combined with ultraviolet radiation.GLEN was applied to the skin at the modeling site and investigated for their anti-skin aging efficacy.Results The optimal GLEN prescription was 30%polyoxymethylene castor oil,14.4%glycerol,11.1%medium chain triglycerides,and 44.5%water.GLEN was a dark brown and transparent liquid at room temperature,O/W type nano-emulsion with an average particle size(32.20±2.89)nm,polydispersity coefficient 0.38±0.03,zeta potential value(-4.05±0.27)mV.The content of Ganoderma lucidum polysaccharides was(36.35±0.55)mg·mL-1,and the content of Ganoderma lucidum triterpenes was(5.99±0.46)mg·mL-1,which possessed good stability.Pharmacodynamic experiments showed compared with the model group,the skin scores of mice in the GLEN group significantly improved(P﹤0.05),the water content increased(P﹤0.01),and the contents of SOD,GSH-PX and Hyp increased(P﹤0.05),while the content of MDA was decreased significantly(P﹤0.01).HE,Masson and Sirius crimson staining further indicated that the pathological changes in mice were alleviated to varying degrees in GLEN group.And GLEN had high safety for skin,could be applied to human body.Conclusion In this study,the prepared GLENs were homogeneous in appearance,stable in nature,and exhibited significant anti-aging effects on mouse skin.

Objective To screen the prescription,preparation,quality evaluation of Ganoderma lucidum extract nano-emulsion(GLEN)and study its anti-skin aging effect.Methods The emulsifier and oil phase of the nano-emulsion were preliminarily screened by solubility method.The pseudo-ternary phase diagram method was used to screen the nano-emulsions,and the prepared GLEN were evaluated for quality in terms of the appearance,particle size,structure,drug loading,stability and skin safety.A mouse skin aging model was constructed by injecting D-galactose combined with ultraviolet radiation.GLEN was applied to the skin at the modeling site and investigated for their anti-skin aging efficacy.Results The optimal GLEN prescription was 30%polyoxymethylene castor oil,14.4%glycerol,11.1%medium chain triglycerides,and 44.5%water.GLEN was a dark brown and transparent liquid at room temperature,O/W type nano-emulsion with an average particle size(32.20±2.89)nm,polydispersity coefficient 0.38±0.03,zeta potential value(-4.05±0.27)mV.The content of Ganoderma lucidum polysaccharides was(36.35±0.55)mg·mL-1,and the content of Ganoderma lucidum triterpenes was(5.99±0.46)mg·mL-1,which possessed good stability.Pharmacodynamic experiments showed compared with the model group,the skin scores of mice in the GLEN group significantly improved(P﹤0.05),the water content increased(P﹤0.01),and the contents of SOD,GSH-PX and Hyp increased(P﹤0.05),while the content of MDA was decreased significantly(P﹤0.01).HE,Masson and Sirius crimson staining further indicated that the pathological changes in mice were alleviated to varying degrees in GLEN group.And GLEN had high safety for skin,could be applied to human body.Conclusion In this study,the prepared GLENs were homogeneous in appearance,stable in nature,and exhibited significant anti-aging effects on mouse skin.

Oxidative stress(OS)and dopaminergic neuron(DN)dysfunction are implicated in the pathogenesis and progression of various neurological disorders.As the primary active component of the traditional Chinese herb Scutellaria baicalensis,baicalin has garnered significant attention due to its potent antioxidant and anti-inflammatory properties.Baicalin exhibits a particular affinity for the dopamine(DA)system,maintaining cerebral DA levels by regulating oxidative stress(OS)-related pathways,suggesting that the DA system serves as the"intracerebral target system"through which it exerts its neuroprotective effects.Nuclear factor erythroid 2-related factor 2(Nrf2),a central transcription factor regulating redox homeostasis,plays a pivotal role in the anti-OS process mediated by baicalin.This systematic review covers the pharmacological effects of baicalin,providing an in-depth mechanistic analysis of the interaction between OS and DN,with a focus on the latest research progress in baicalin-mediated treatment of OS through the Nrf2 signaling pathway in neurological diseases to provide theoretical references for the pharmacological and molecular mechanisms of baicalin's anti-OS modulation of the DA system for the treatment of neurological diseases.

Objective To compare the stress difference of the resin with different thicknesses in the screw access hole using three-dimensional finite element method.Methods A three-dimensional finite element model of the implant at the site of the mandibular first molar was established by computer aided design(CAD)software.A static load of 200 N was applied to the resin models with different thicknesses(1,2,3,4,5 mm)to analyze the effect of thickness on the von Mises stress and shear stress of the resin.Results In a certain range,the maximum von Mises stress and the maximum shear stress of the resin decreased with the increase of the thickness.At the thickness of 1mm,the maximum von Mises stress and shear stress of the resin were 23.85 MPa and 11.82 MPa,respectively.When the thickness was 2 mm,the maximum von Mises stress and shear stress of the resin were 18.75 MPa and 9.73 MPa respectively.At the thickness of 3 mm,the maximum von Mises stress and shear stress of the resin were 17.46 MPa and 9.04 MPa,respectively.When the thickness of the resin was more than 3 mm,the stress on it was in a stable level trend.When the thickness was 4 mm,the maximum von Mises stress and shear stress of the resin were 17.38 MPa and 9.04 MPa,respectively.When the thickness was 5 mm,the maxi-mum von Mises stress and maximum shear stress of the resin were 17.18 MPa and 8.85 MPa,respectively.Conclusion When the res-in reaches a certain thickness,the stress is small and stable.This study provides a new design strategy for reducing the complications after implant restoration caused by stress fatigue of the resin.

Objective To compare the differences in stress on maxillary anterior implants and labial cortical bone under varying thicknesses of palatal bone plates through three-dimensional finite element analysis.Methods Using CBCT scan data and finite ele-ment software,a three-dimensional finite element model of maxillary central incisor implant restoration was constructed.The thickness of the palatal bone plate at the cervical region of the implant was set to 0,0.5,1.0 mm,respectively.The effects of different palatal bone plate thicknesses on the equivalent stress of the implant and the minimum principal stress(compressive stress)of the labial corti-cal bone under normal occlusal conditions were simulated.Results Under normal occlusion,when the palatal cervical bone plate thickness was 0,0.5,1.0 mm,the maximum equivalent stress of the implant was consistently located at the midline of the labial cervi-cal region at the implant-abutment interface,with values of 106.8,103.5,99.71 MPa,respectively.Meanwhile,the minimum princi-pal stress of the cortical bone appeared at the alveolar crest at the junction of the implant-abutment and labial alveolar bone,measuring 107.8,103.2,95.55 MPa,respectively.The results indicated that as the palatal cervical bone plate thickness decreased,both the maximum equivalent stress of the implant and the minimum principal stress of the labial cortical bone exhibited an increasing trend,though they remained below their respective yield strengths.Conclusion From a biomechanical perspective,maxillary anterior implant restoration remains feasible even when the thickness of the palatal bone plate at the cervical region of the implant is 0 mm.

A 71-year-old man with undifferentiated sarcoma was treated with palliative first-line regimen(epirubicin,anlotinib and penpulimab)for 6 cycles and maintained with anlotinib and penpulimab for 30 cycles.He was admitted to the hospital due to chest pain 25 months after the first treatment.The laboratory examination showed cardiac troponin T 1.26 ng·mL-1,N terminal pro B type natriuretic peptide 8,545 pg·mL-1,coronary computed tomography angiography(CTA)showed non-calcified plaque in the left proximal anterior descending branch,severe lumen stenosis,nearly complete occlusion.Emergency CTA was performed on the same day,showing 50％stenosis of the distal left main coronary artery(LMCA);95％stenosis of the left anterior descending(LAD)branch ostium,the LAD branch was medium-sized and showed no stenosis;50％stenosis of the left circumflex branch(LCx),and a cardiac stent was implanted into the LAD branch.The patient has recovered after coronary artery stent implantation.Naranjo's Assessment Scale was used to evaluate the association of suspected drugs,the acute myocardial infarction of this patient was likely associated with the combination of penpulimab and anlotinib.Myocardial infarction is a rare but severe adverse drug reaction of anti-tumor treatment.This article summarizes the related risks and treatment measures to provide a reference for clinical medication safety.

Glucagonoma is a rare neuroendocrine tumor derived from the pancreatic α cells, and alopecia is an uncommon clinical manifestation. We report a case of glucagonoma presenting with marked alopecia, aiming to raise clinicians′ awareness of this rare presentation.

Objective To compare the stress difference of the resin with different thicknesses in the screw access hole using three-dimensional finite element method.Methods A three-dimensional finite element model of the implant at the site of the mandibular first molar was established by computer aided design(CAD)software.A static load of 200 N was applied to the resin models with different thicknesses(1,2,3,4,5 mm)to analyze the effect of thickness on the von Mises stress and shear stress of the resin.Results In a certain range,the maximum von Mises stress and the maximum shear stress of the resin decreased with the increase of the thickness.At the thickness of 1mm,the maximum von Mises stress and shear stress of the resin were 23.85 MPa and 11.82 MPa,respectively.When the thickness was 2 mm,the maximum von Mises stress and shear stress of the resin were 18.75 MPa and 9.73 MPa respectively.At the thickness of 3 mm,the maximum von Mises stress and shear stress of the resin were 17.46 MPa and 9.04 MPa,respectively.When the thickness of the resin was more than 3 mm,the stress on it was in a stable level trend.When the thickness was 4 mm,the maximum von Mises stress and shear stress of the resin were 17.38 MPa and 9.04 MPa,respectively.When the thickness was 5 mm,the maxi-mum von Mises stress and maximum shear stress of the resin were 17.18 MPa and 8.85 MPa,respectively.Conclusion When the res-in reaches a certain thickness,the stress is small and stable.This study provides a new design strategy for reducing the complications after implant restoration caused by stress fatigue of the resin.

Objective To compare the differences in stress on maxillary anterior implants and labial cortical bone under varying thicknesses of palatal bone plates through three-dimensional finite element analysis.Methods Using CBCT scan data and finite ele-ment software,a three-dimensional finite element model of maxillary central incisor implant restoration was constructed.The thickness of the palatal bone plate at the cervical region of the implant was set to 0,0.5,1.0 mm,respectively.The effects of different palatal bone plate thicknesses on the equivalent stress of the implant and the minimum principal stress(compressive stress)of the labial corti-cal bone under normal occlusal conditions were simulated.Results Under normal occlusion,when the palatal cervical bone plate thickness was 0,0.5,1.0 mm,the maximum equivalent stress of the implant was consistently located at the midline of the labial cervi-cal region at the implant-abutment interface,with values of 106.8,103.5,99.71 MPa,respectively.Meanwhile,the minimum princi-pal stress of the cortical bone appeared at the alveolar crest at the junction of the implant-abutment and labial alveolar bone,measuring 107.8,103.2,95.55 MPa,respectively.The results indicated that as the palatal cervical bone plate thickness decreased,both the maximum equivalent stress of the implant and the minimum principal stress of the labial cortical bone exhibited an increasing trend,though they remained below their respective yield strengths.Conclusion From a biomechanical perspective,maxillary anterior implant restoration remains feasible even when the thickness of the palatal bone plate at the cervical region of the implant is 0 mm.