ObjectiveTo observe the clinical efficacy and safety of Yuyin Lidan granules （YYLD） in preventing the recurrence of common bile duct stones （CBDS） in patients with liver and gallbladder dampness-heat syndrome following endoscopic retrograde cholangiopancreatography （ERCP）. MethodsThis randomized， parallel， controlled trial enrolled postoperative CBDS-ERCP patients who met the inclusion and exclusion criteria. Sixty-four patients were randomly assigned to an observation group or a control group， with 32 cases in each. Both groups received conventional Western medical treatment after ERCP， while the observation group additionally received YYLD for 8 weeks. The follow-up period lasted for 1 year. The efficacy indicators included bile bilirubin levels， traditional Chinese medicine （TCM） syndrome scores， clinical efficacy rate， pancreatitis and inflammation markers， postoperative liver function， and CBDS recurrence rate at 1-year follow-up， which were used to jointly evaluate the clinical efficacy and safety of both groups. ResultsA total of 56 patients completed the study and were included in the final analysis， i.e.， 29 in the observation group and 27 in the control group. Baseline characteristics were comparable between the two groups. Compared with pre-treatment and with the control group after treatment， the bile bilirubin level in the observation group significantly decreased （P<0.05）. After treatment， the clinical cure and marked improvement rates were higher in the observation group than in the control group， showing a statistically significant difference in overall clinical efficacy （P<0.05）. Compared with pre-treatment， the primary and secondary symptoms in the observation group， as well as the primary symptom and the secondary symptom of nausea and vomiting in the control group （weeks 4 and 8）， were significantly reduced （P<0.05）. Compared with the control group after treatment， the observation group showed significant reductions in the primary symptom of loose stools/constipation （day 5 and week 4） and in three secondary symptoms， i.e.， bitter taste and sticky dry mouth， abdominal distension and poor appetite （throughout the treatment period）， and general heaviness and fatigue （day 5 and week 4）， with statistical differences （P<0.05）. Compared with pre-treatment， both groups showed decreased lipase and urinary amylase levels （P<0.05）. However， no significant between-group differences were observed in pancreatitis or inflammation-related indices after treatment. Compared with pre-treatment， all liver function indicators in the observation group and alanine aminotransferase （ ALT ）， γ-glutamyl transferase （ γ-GT ）， alkaline phosphatase （ALP）， and conjugated bilirubin in the control group significantly decreased at weeks 4 and 8 （P<0.05）. Compared with the control group after treatment， only serum total bilirubin and unconjugated bilirubin were significantly reduced in the observation group during the treatment period （P<0.05）. ConclusionYYLD combined with conventional Western medical treatment can effectively regulate bilirubin metabolism （in bile and serum）， improve TCM clinical symptoms， and prevent CBDS recurrence after ERCP in patients with liver and gallbladder dampness-heat syndrome. This regimen is safe and effective and is worthy of further clinical research and promotion.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

ObjectiveTo investigate the incidence rate of post-endoscopic retrograde cholangiopancreatography （ERCP） pancreatitis （PEP） in patients with difficult common bile duct intubation undergoing pancreatic duct stenting during surgery， as well as the effect of pancreatic duct stenting in the prevention and treatment of PEP， and to provide a basis for clinical treatment. MethodsA retrospective analysis was performed for the clinical data of 186 patients with biliary tract disease who underwent initial ERCP and had difficult common bile duct intubation in The First Affiliated Hospital of Zhengzhou University from January 2016 to December 2024， and according to the condition of pancreatic duct stenting， the patients were divided into control group with 73 patients （without pancreatic duct stenting）， 5Fr-5 cm stent group with 67 patients， and 7Fr-5 cm stent group with 46 patients. The three groups were compared in terms of baseline data， intraoperative procedures， and postoperative outcomes. A one-way analysis of variance was used for comparison of normally distributed continuous data between multiple groups， and the least significant difference t-test was used for further comparison between two groups； the Kruskal-Wallis H rank sum test was used for comparison of non-normally distributed continuous data between multiple groups， and the Dunn method was used for further comparison between two groups； the chi-square test or the Fisher’s exact test was used for comparison of categorical data between groups. The Logistic regression analysis was used to investigate the influencing factors for PEP in patients with difficult intubation during ERCP. ResultsThe overall incidence rate of PEP was 12.37% （23/186）. Compared with the 5Fr-5 cm stent group and the 7Fr-5 cm stent group， the control group had a significantly higher incidence rate of PEP， a significantly higher score of postoperative abdominal pain， and a significantly longer length of postoperative hospital stay （all P0.01）， and 55.56% of the patients in the control group had moderate-to-severe PEP. The univariate Logistic regression analysis showed that intradiverticular papilla， double guide wire intubation， needle knife precut， the application of basket and balloon for removal of common bile duct stones， intraoperative biopsy， pancreatic duct stenting， intubation time≤10 minutes， frequency of intubation≤5 times， preoperative CRP≤5 mg/L were influencing factors for PEP （all P0.05）， and the multivariate Logistic regression analysis showed that intraoperative pancreatic duct stenting， needle knife precut， and intraoperative biopsy were independent influencing factors for the onset of PEP （all P0.05）. ConclusionPancreatic duct stenting during ERCP can effectively reduce the risk of PEP in patients with difficult intubation， while needle knife precut and intraoperative biopsy can increase the risk of PEP in patients with difficult intubation.

ObjectiveIn nature, objects cast shadows due to illumination, forming the basis for stereoscopic perception. Birds need to adapt to changes in lighting (meaning they can recognize stereoscopic shapes even when shadows look different) to accurately perceive different three-dimensional forms. However, how neurons in the key visual brain area in birds handle these lighting changes remains largely unreported. In this study, pigeons (Columba livia) were used as subjects to investigate how neurons in pigeon’s ventrolateral mesopallium (MVL) represent stereoscopic shapes consistently, regardless of changes in lighting. MethodsVisual cognitive training combined with neuronal recording was employed. Pigeons were first trained to discriminate different stereoscopic shapes (concave/convex). We then tested whether and how light luminance angle and surface appearance of the stereoscopic shapes affect their recognition accuracy, and further verify whether the results rely on specify luminance color. Simultaneously, neuronal firing activity of neurons was recorded with multiple electrode array implanted from the MVL during the presentation of difference shapes. The response was finally analyzed how selectively they responded to different stereoscopic shapes and whether their selectivity was affected by the changes of luminance condition (like lighting angle) or surface look. Support vector machine (SVM) models were trained on neuronal population responses recorded under one condition (light luminance angle of 45°) and used to decode responses under other conditions (light luminance angle of 135°, 225°, 315°) to verify the invariance of responses to different luminance conditions. ResultsBehavioral results from 6 pigeons consistently showed that the pigeons could reliably identify the core 3D shape (over 80% accuracy), and this ability wasn’t affected by changes in light angle or surface appearance. Statistical analysis of 88 recorded neurons from 6 pigeons revealed that 83% (73/88) showed strong selectivity for specific 3D shapes (selectivity index>0.3), and responses to convex shapes were consistently stronger than to concave shapes. These shape-selective responses remained stable across changes in light angle and surface appearance. Neural patterns were consistent under both blue and orange lighting. The decoding accuracy achieves above 70%, suggesting stable responses under different conditions (e.g., different lighting angles or surface appearance). ConclusionNeurons in the pigeon MVL maintain a consistent neural encoding pattern for different stereoscopic shapes, unaffected by illumination or surface appearance. This ensures stable object recognition by pigeons in changing visual environments. Our findings provide new physiological evidence for understanding how birds achieve stable perception (“invariant neural representations”) while coping with variations in the visual field.

Objective To evaluate the influence of the wearing position of dosimeters outside lead aprons on effective dose estimation for interventional radiology workers, analyze the differences between single and double dosimeter methods in effective dose estimation, and provide a reference for the personal dose monitoring of interventional radiology workers. Methods This study employed a combined approach of on-site monitoring and Monte Carlo simulation to evaluate the impact of the wearing position of dosimeters outside lead aprons on effective dose estimation, as well as the differences between effective doses measured using single and double dosimeters. Interventional radiology workers wore dosimeters at three positions: the neck outside the lead collar, the left chest outside the lead apron, and inside the lead apron. Effective doses were estimated using the single and double dosimeter methods specified in GBZ 128-2019 Specifications for individual monitoring of occupational external exposure, and the impact of different wearing positions on the estimation results was compared. Geant4 Monte Carlo simulations were used to model dose distributions at the neck outside the lead collar and at the left chest outside the lead apron for operators performing cardiovascular interventions under tube voltages of 70, 80, 90, and 100 kVp and exposure angles of posteroanterior (PA), anteroposterior (AP), and left anterior oblique 45° (LAO45°) positions. The study assessed the impact of dosimeter wearing position on effective dose estimation. Results Monte Carlo simulations demonstrated that neck doses consistently exceeded left chest doses across different tube voltages and exposure angles, with neck-to-chest dose ratios of 0.80-0.90. Under identical tube voltage conditions, AP showed the highest doses, followed by LAO45°, and PA demonstrated the lowest doses. The single and double dosimeter methods exhibited consistent patterns in effective dose estimation. Single dosimeter method generally yielded higher effective doses with relative deviations of 9.9% to 83%, though these deviations decreased under high tube voltages. Field monitoring data indicated that most interventional radiology workers maintained relative deviations between single and double dosimeter calculations below 6%, with neck-to-chest dose ratios of 0.95-1.1. The estimation patterns remained consistent across both methods, though single dosimeter method showed slightly higher results. Conclusion Under PA, AP, or LAO45°, the doses at the neck consistently exceeded those at the left chest. Therefore, when wearing lead protective equipment, the dosimeter should be properly positioned at the neck outside the lead collar to accurately reflect the radiation doses of surgeons. Some interventional radiology workers improperly positioned the dosimeter (intended at the neck outside the lead collar) at the left chest outside the lead apron, and this may result in an underestimation of the effective dose.

Aim To establish and evaluate an alternative meth-od for detecting skin sensitization of cosmetics based on local lymph node assay using bromodeoxyuridine(BrdU)with flow cytometry(FCM).Methods(1)25％hexyl cinnamic alde-hyde(HCA)was chosen as a positive control with an acetone:olive oil(4∶1,V/V,AOO)mixture as a vehicle control for the experiment.The dorsal sides of both ears of mice were treated with test solutions on day 1,day 2,and day 3.Brdu solution was injected inter-peritoneally on day 5.On day 6,the bilateral ears and mandibular lymph nodes were excised,and the number of Brdu positive cells was measured by flow cytometry.The stim-ulation index(SI)was calculated to identify whether it was ≥3,in order to establish the method of LLNA:Brdu-FCM.(2)BrdU-FCM test was conducted using a blind method with the fif-teen reference substances listed in OECD TG429 whose skin sensitization potentials were known.The test substances were dissolved in AOO,N,N-dimethylformamide(DMF)or dimeth-yl sulfoxide(DMSO)at three different concentrations.Tests were performed the same as above.SI and EC2.7 were calculat-ed to evaluate whether the test substance was categorized as a skin sensitizer.The reliability and accuracy of the method were validated by comparing the classification of test substances with that in OECD TG429.Results The SI for 25％HCA was 3.9,showing positive in the skin sensitization test.It demonstrated that the LLNA:Brdu-FCM test method was properly implemen-ted.Nine test substances(2,4-dinitrochlorobenzene,4-pheny-lenediamine,cobalt chloride,2-mercaptobenzothiazole,hexyl-cinnamaldehyde,eugenol,phenyl benzoate,cinnamic alcohol,imidazolidinyl urea)were positive,and six test substances(methyl methacrylate,chlorobenzene,isopropanol,lactic acid,methyl salicylate,salicylic acid)were negative.The method was evaluated with sensitivity of 90％,specificity of 100％,positive prediction rate of 100％,negative prediction rate of 83％,false positive rate of 0％,false negative rate of 17％and accuracy of 93％.The LLNA:BrdU-FCM assay could correctly categorize the test substances that were skin sensitizers or non-sensitizers.Conclusion The LLNA:BrdU-FCM assay appears to be a relia-ble predictor of skin sensitization protential of chemicals,and it is expected to an alternative method for identifying skin sensitization as a supplementary in safety evaluation of cosmetic ingredient.

An assay was established for detection of toxigenic Clostridioides difficile by combining microfluidic chip analysis with immunochromatography,and its performance was evaluated and compared with those of the Xpert C.difficile/Epi and VIDAS CD AB tests.Primer pairs were designed according to the tcdB and tpi genes in C.difficile.The specificity,limit of detection,reproducibility,and stability were evaluated.A total of 215 stool samples from patients with diarrhea were collected and tested in parallel with the Xpert C.difficile/Epi,VIDAS CDAB,and our assay.C.difficile was isolated from samples,and the tcdB gene was identified when discrepant results were obtained from the three above assays.Our assay showed no cross-reaction with other diarrhea-associated pathogens.Its reproducibility was 100％in testing of two standard plasmids containing tcdB and tpi genes at two concentrations(105 and 102 copies/μL).Two standard plasmids were detected after the PCR and immunochromatography reagents had been stored for 3,6,9,and 12 months,and all the results were posi-tive.The limit of detection was 10 copies/μL for toxigenic C.difficile.Testing of 33 samples positive for C.difficile with our assay(33/215,15.3％)yielded findings statistically coherent with those of the Xpert C.difficile/Epi test(kappa value=0.965).The sensitivity,specificity,positive predictive value,and negative predictive value of our assay,with respect to Xpert C.difficile/Epi as the standard,were 94.3％,100.0％,100.0％,and 98.9％;these values were significantly higher than those of VIDAS CDAB(60.0％,98.9％,91.3％,and 92.7％)(Kappa=0.714,OR=157.50,95％CI:62.03-847.28,P=0.013).In conclusion,our newly developed assay is specific,stable,and reproducible,and may be used for rapid and accu-rate detection of toxigenic C.difficile.The assay could be used for C.difficile infection screening in outpatient and emergen-cy,community medical service center,and epidemiological settings.

Objective To observe the impact factors of vascular heat sink effect during in vitro microwave ablation(MWA)of porcine lung.Methods Simulation models were established using in vitro porcine lung tissue blocks based on isobaric inflation with an air pump and cyclic perfusion of duck blood with a glass tube and peristaltic pump,etc.MWA was performed under 8 different combining conditions(vessel diameter of 3 or 5 mm,blood perfusion of 30 or 50 cm/s,as well as distance between vessel and ablation antenna of 5 or 10 mm)each for 3 times.The highest temperature TV on vessel side and TC on control side during MWA,and ablation depth DV on vessel side and DC on control side after MWA were recorded.Multi-factor linear regression equations were constructed based on simulated vessel diameters,blood perfusion and distance between vessel and ablation antenna,and the impact factors of|TC-TV|and|DC-DV|were screened,respectively.Results Simulated vessel diameter showed linear positive correlation with both|TC-TV|and|DC-DV|(both P＜0.001).Simulated distance between vessel and ablation antenna showed linear negative correlation with both|TC-TV|and|DC-DV|(both P＜0.001),and the latter had more obvious impact on vascular heat sink effect than the former.Meanwhile,no significant linear relationship was found between simulated blood perfusion and|TC-TV|nor|DC-DV|(both P＞0.05).Conclusion Simulated vessel diameter and distance between vessel and ablation antenna were both impact factors of vascular heat sink effect during in vitro MWA of porcine lung,and the latter was more influential,whereas simulated blood perfusion showed no significant impact on it.

Objective To explore the correlation between fasting blood glucose(FBG)level and fractional flow reserve(FFR)in patients with borderline coronary artery disease,and to clarify its potential influence on FFR measurement.Methods From August 2020 to August 2023,the data of 135 patients with coronary atherosclerotic heart disease who received coronary angiography and FFR evaluation in the Fourth Affiliated Hospital of Harbin Medical University were retrospectively collected.According to the exclusion and inclusion criteria,85 cases of borderline diseased vessels of single coronary artery with stenosis degree of 50％-80％were screened out,and they were divided into FBG≥6.1 mmol/L group(47 cases)and FBG＜6.1 mmol/L group(38 cases).The baseline data,angiographic and functional indexes of the two groups were compared,and the correlation between FBG and FFR was analyzed.Results Compared with the FBG＜6.1 mmol/L group,the FBG≥6.1 mmol/L group had a higher proportion of FFR negative results(72.3％vs.23.7％,P＜0.001),and the FFR measurement values were generally increased[0.84(0.80,0.90)vs.0.75(0.68,0.80),P＜0.001],with statistically significant differences.Pearson correlation analysis was performed on all lesions,and FFR＞0.80(negative result)was positively correlated with FBG≥6.1 mmol/L(r=0.484,P＜0.001).Conclusions Among the patients with borderline coronary artery disease(50％-80％stenosis)included in this study,FBG≥6.1 mmol/L is significantly correlated with FFR＞0.80.For patients with borderline coronary lesions with elevated FBG,the influence of blood glucose factors should be carefully considered in clinical interpretation of FFR results.