BACKGROUND:With the development of computer-aided design and computer-aided manufacturing technology,zirconia abutments with a titanium base are widely used in clinic due to its good application advantages,but there are still some problems and a lack of consensus design standards. OBJECTIVE:To review the fabrication methods of Ti-base zirconia abutment,and the effect of abutment connection,emergence design,abutment angle,and bonding on mechanical properties of Ti-base zirconia abutment. METHODS:Relevant literature published from 2010 to 2023 was searched in CNKI and PubMed databases with the search terms"zirconia abutment,titanium base"in Chinese and English,respectively.The search time limit was extended for some classical literature.The relevant literature was obtained through inclusion and exclusion criteria,and 57 eligible documents were included for review. RESULTS AND CONCLUSION:It is recommended that clinicians try to select antirotational titanium bases or rotational titanium bases with a Morse taper connection.Implants should be placed in the correct axial angulation of not more than 15° or with an inclination to the palatal side when using angled zirconia abutments.When a≥30° labial inclination is followed for implant placement,the bite force must be decreased effectively to reduce the risk of mechanical and biological complications of implants,abutments,and prostheses.Ti-base zirconia abutments with a higher gingival height should be selected,and its restorative angle should not exceed 40°.Multilink Hybrid Abutment could be the first choice for extraoral bonding of zirconia abutment to titanium bases.

AIM To evaluate the chemical constituent consistency in formula granules and traditional decoctions of Gouteng Jiangya Formula.METHODS HPLC characteristic chromatograms were established,the analysis was performed on a 30 ℃ thermostatic YMC-Triart C18 column(4.6 mm× 250 mm,5 μm),with the mobile phase comprising of acetonitrile-0.2％phosphoric acid flowing at 1.0 mL/min in a gradient elution manner,and the detection wavelength was set at 240 nm.Puerarin was used as an internal standard to calculate the relative correction factors of 3'-methoxy puerarin,puerarin apioside,magnolflorine,paeoniflora,daidzin,baicalin,palmatine,berberine,wogonoside and benzoylpaeoniflorin,after which the content detemination was made by quantitative analysis of multi-components by single-marker(QAMS).RESULTS The characteristic chromatograms of 9 batches of formula granules and 15 bacthes of traditional decoctions demonstrated the similarities of more than 0.90 at the detection wavelengths of 192,210,240,260,280,300,320,360 nm,along with similar total peak areas.Eleven constituents showed good linear relationships within their own ranges(r＞0.999 0),whose average recoveries were 97.27％-101.64％with the RSDs of 0.36％-1.11％,the result obtained by QAMS and external standard method demonstrated no significant differences(P＞0.05).The contents of various constituents in the formula granules approximated those in the traditional decoctions.CONCLUSION The consistent kinds and contents of various constituents are obversable in formula granules and traditional decoctions of Gouteng Jiangya Formula,which can provide a reference for the reasonable clinical application of this formula.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Objective:To examine the clinical features and genetic profiles of patients with thyroid peroxidase(TPO) gene mutations and provide diagnostic guidance for clinicians.Methods:A retrospective review of four patients with TPO mutations treated at Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, from January 2014 to December 2023. Data on demographics, clinical manifestation, genotypes, treatment, and prognosis of these patients were analyzed.Results:Two males and two females, aged 13 to 27 years at diagnosis, presented with goiter as the initial symptom, with three cases menifesting during puberty. Laboratory findings showed mildly elevated or upper-limit-normal serum thyroid-stimulating hormone(TSH) levels, significantly increased free triiodothyronine/free thyroxine(FT 3/FT 4) ratios, and elevated thyroglobulin(TG) levels. Genetic testing revealed compound heterozygous pathogenic or likely pathogenic TPO mutations. Despite regular levothyroxine(L-T 4) therapy, goiter persisted. Three patients required thyroidectomy due to cosmetic or compressive symptoms, with pathology showing follicular hyperplasia. Conclusion:TPO mutations are characterized by adolescent-onset goiter, elevated FT 3/FT 4 ratios, and normal to high TSH. Genetic testing confirms the diagnosis. L-T 4 offers limited improvement, and surgery is often needed.

ObjectiveTo analyze the premature mortality and disease burden attributable to major chronic diseases in Huangyan District, Taizhou City, Zhejiang Province from 2015 to 2024, and to provide data support for the efforts of local chronic disease prevention and control. MethodsBased on the mortality surveillance data of registered residents in Huangyan District from 2015 to 2024, mortality rates and premature mortality rates of malignant tumors, diabetes mellitus, cardiovascular and cerebrovascular diseases, and chronic respiratory diseases were calculated. Indicators such as potential years of life lost (PYLL), average years of life lost (AYLL), and potential years of life lost rate (PYLLR) were also estimated. ResultsFrom 2015 to 2024, the crude mortality rate of major chronic diseases among registered residents in Huangyan District was 514.27/100 000, with an age-standardized mortality rate of 377.17/100 000. The crude (standardized) mortality rate was 588.00/100 000 (422.00/100 000) in males and 440.50/100 000 (328.08 /100 000) in females, indicating higher mortality among males. The fluctuation ranges of premature mortality rate of malignant tumors, diabetes mellitus, cardiovascular and cerebrovascular diseases and chronic respiratory diseases were 4.53%‒8.38%, 0.15%‒0.72%, 2.00%‒4.03% and 0.23%‒0.47%, respectively. The premature mortality rates of malignant tumors and cardiovascular and cerebrovascular diseases showed a decreasing trend (all P<0.05), while that of diabetes mellitus increased statistically significant (P<0.05). Malignant tumors accounted for the highest PYLL and PYLLR (5 107.15 person-years and 9.47‰, respectively), whereas chronic respiratory diseases contributed the lowest (213.25 person-years and 0.40‰, respectively). Cardiovascular and cerebrovascular diseases resulted in the highest AYLL (10.62 years), while chronic respiratory diseases had the lowest (7.64 years). The PYLL, AYLL, and PYLLR for major chronic diseases were 5 432.20 person-years, 10.24 years, and 19.99‰ in males, and 2 617.15 person-years, 10.49 years, and 9.78‰ in females, respectively, indicating greater loss of life expectancy in males than in females. ConclusionFrom 2015 to 2024, both age-standardized mortality and premature mortality attributable to major chronic diseases of registered residents declined in Huangyan District, reflecting notable achievements in chronic disease control. However, malignant tumors and cardiovascular and cerebrovascular diseases remained the main causes of death, while the burden of diabetes mellitus continued to rise. Males experienced higher premature mortality rate and life expectancy loss caused by major chronic diseases than females. Targeted chronic disease screening, risk factor surveillance, and interventions among high-risk populations should be further strengthened by local health authorities.

A recombinant adenovirus(rAd)for expression of Mycobacterium tuberculosis(M.tb)c-di-AMP phosphodiesterase CnpB was constructed,and its induced humoral immune response was detected.The codon-optimized gene of M.tb CnpB was cloned into the adenoviral plasmid pcADV.The recombinant plasmid pcADV-CnpB was transfected into HEK293T cells,and expression was detected with Western blot.The recombinant plasmid pcADV-CnpB and the backbone plasmid were co-transfected into HEK293T cells to obtain the recombinant adenovirus rAd-CnpB.rAd-CnpB was amplified in HEK293T cells,and the target protein expression of rAd-CnpB was detected with Western blot and immunofluorescence.Mice were immunized with rAd-CnpB intranasally,and their sera and bronchoalveolar lavage fluid(BALF)were collected.ELISA was used to detect levels of antigen-specific antibodies.Restriction enzyme digestion and sequencing indicated that the recombinant plasmid pcADV-CnpB was successfully constructed and led to protein expression in eukaryotic cells.rAd-CnpB was packaged and produced in HEK293T cells.After amplification and purification,rAd-CnpB with a titer of 5.53×1010 PFU/mL was obtained.rAd-CnpB led to CnpB expression in HEK293T cells.Intranasal immunization with rAd-CnpB increased levels of IgG and secretory IgA in BALF and led to high levels of IgG in sera.rAd-CnpB,the recombinant adenovirus for expression of c-di-AMP phosphodiesterase CnpB was successfully constructed,and was found to induce antigen-specific humoral and mucosal immune responses through mucosal immunization.Thus,rAd-CnpB may be used in further research on new TB vaccine strategies.

BACKGROUND:As an essential trace element for body growth and development,copper participates in many processes such as redox process,energy generation,signal transduction and bone metabolism.The imbalance of copper homeostasis in diabetic patients will lead to the increase of oxidative stress and the impairment of antioxidant mechanism,which stimulate the production of inflammatory mediators and inflammatory factors,and thus lead to cytotoxicity and body damage.In recent years,the role of copper in diabetes has gradually attracted attention,and some studies have confirmed that copper plays a key regulatory role in the pathological process of diabetes.OBJECTIVE:To summarize the current progress in the role of copper in systemic complications of diabetes and provide some theoretical reference for its future research and treatment.METHODS:The first author searched PubMed,Web of Science,CNKI and WanFang databases for literature related to the role of copper in systemic complications of diabetes.The search terms were"copper,Cu,diabetes,diabetic complications,diabetic cardiomyopathy,diabetic nephropathy,diabetic retinopathy,diabetic osteoporosis,diabetic periodontitis"in English and Chinese,respectively.After screening,95 articles were included in the review.RESULTS AND CONCLUSION:(1)Copper is involved in the occurrence and development of diabetic complications and most of the damage caused by copper to the body is due to interference with the body's redox level.(2)In diabetic cardiomyopathy,increased Cu2+in the corpuscular circulation and impaired uptake of copper ions by cardiomyocytes,the accumulation of redox-active Cu2+and ceruloplasmin outside the cardiomyocyte induces copper oxidative stress in cardiomyocytes,leading to acute cardiac impairment.(3)In diabetic nephropathy,the toxic effect of excessive copper leads cause granular degeneration and vacuolar degeneration of renal tubular epithelial cells and proximal tubular necrosis,eventually leading to chronic or acute renal failure.(4)Excessive copper in diabetic patients can produce reactive oxygen species and directly or indirectly affect the function of copper protein with antioxidant function,thus damaging retinal cells.(5)In patients with diabetic osteoporosis,accumulated copper induces lipid peroxidation and interferes with bone metabolism.Copper acts on osteoblasts mainly through inhibition of superoxide dismutase,glutathione peroxidase,and alkaline phosphatase activities.(6)Excessive copper exacerbates inflammatory changes in periodontal tissue by promoting inflammatory responses.

This study investigated the drug resistance and genetic relationships among strains co-existing in animals,the environ-ment,and the living quarters of employees at large-scale pig farms in certain regions of Shandong Province,to provide a scientific ba-sis for elucidating the transmission mechanisms of drug-resistant bacteria through bacterial traceability analysis.Samples were col-lected from two pig farms,and bacteria were isolated and purified.The species of the isolated strains were identified via 16S rRNA gene sequencing.Antimicrobial susceptibility testing was conducted with a VITEK-2 Compact system and the disk diffusion method for strains present in pigs,the environment,and living areas.Furthermore,whole-genome sequencing was performed on the Illumina Miniseq platform to annotate drug resistance genes,and multilocus sequence typing(MLST)and core genome single nucleotide poly-morphism(cgSNP)analyses were used to trace the resistant strains.Three species—Staphylococcus aureus,Pseudomonas aeruginosa,and Bacillus cereus—were isolated and cultured from animals,the environment,and employee living areas,and their distributions were analyzed.These strains exhibited diverse drug resistance spectra and genetic diversity.Additionally,the strains displayed highly consistent resistance profiles,resistance genes,ST types,and SNP loci in pig urine,soil both inside and outside the facility,human drinking water,and the cafeteria and dormitories.Our findings indicated a potential risk of transmission of opportunistic pathogens be-tween the pig farming area and the living quarters.Particular attention should be paid to the environmental transmission of methicillin-resistant Staphylococcus aureus.

In recent years,robot-assisted technology has become increasingly sophisticated in the field of orthopedic surgical navigation.To ensure surgical safety and protect patient rights,corresponding products must undergo rigorous and standardized pre-market quality evaluations.In 2023,the National Medical Products Administration issued the sectoral standard YY/T 1901-2023 Requirements and Test Methods for Orthopaedic Surgical Navigation Equipment Employing Robotic Technology.This standard specifies the performance require-ments for robotic orthopedic surgical navigation systems across ten key aspects:general requirements,robotic arm positioning device performance,tracking device performance,system performance,installation repeatability,protective functions,orthopedic powered surgical instruments,liquid cooling,positioning acces-sory requirements,and software requirements.Additionally,it standardizes quality evaluation methods,provi-ding significant guidance for advancing robotic technology,accelerating product market entry,and strengthe-ning regulatory oversight.This article analyzes the key components of the standard to facilitate better quality assessment of products and promote high-quality development within the industry.

In recent years,with the rapid development of the artificial intelligence(AI)medical device industry,regulatory authorities have been continuously strengthening quality control over datasets.In 2024,the National Medical Products Administration(NMPA)issued the significant industry standard YY/T 1949-2024 Artificial Intelligence Medical Devices—Particular Requirements for Datasets:Color Fundus Photographs of Dia-betic Retinopathy,which is China's first specialized standard for evaluating dataset quality in AI medical devices targeting a specific disease area.Under the existing general standards framework for AI medical devices,this standard focuses specifically on diabetic retinopathy fundus photograph datasets,systematically proposing spe-cialized quality requirements and testing methods.Its implementation will provide clear technical guidance for dataset manufacturers,help improve the development quality of AI-assisted diagnostic software for diabetic retinopathy,and promote standardized industry advancement.