Background Work alienation is a subjectively negative psychological state characterized by detachment from one's job and its environment. Due to heavy workloads, high-intensity tasks, low compensation, as well as pressures related to promotion, nurses are particularly susceptible to work alienation. Objective To meta-analyze the primary factors affecting work alienation of nurses in China, providing an evidence-based foundation for improving nursing management and nurses' physical and mental health. Methods A systematic search was conducted across multiple databases, including PubMed, Embase, the Cochrane Library, Web of Science, CNKI, VIP, Wanfang Data, and DBM, for cross-sectional studies on work alienation and its influencing factors among nurses in China published from inception to December 2024. Two researchers independently conducted literature screening, data extraction, and risk of bias assessment for the included studies. Meta-analysis was performed using Stata 15.0 and RevMan 5.4 software. Pooled effect sizes were calculated using either fixed-effects or random-effects models based on the magnitude of heterogeneity. Results A total of 27 studies involving 13 028 nurses were included in the meta-analysis, from which 11 influencing factors of work alienation were identified. The pooled score for work alienation among nurses in China was 34.79 (95%CI: 32.56, 37.01). Subgroup analysis revealed that the emergency department reported the highest score (36.81, 95%CI: 31.64, 41.98), followed by the intensive care unit (34.99, 95%CI: 32.27, 37.72) and internal medicine department (33.90, 95%CI: 29.10, 38.71). Significant factors influencing work alienation included length of work experience [standardized mean difference (SMD)=0.32, 95%CI: 0.02, 0.61], professional title (SMD=0.30, 95%CI: 0.16, 0.44), monthly income (SMD=0.38, 95%CI: 0.14, 0.62), psychological capital (SMD=–0.41, 95%CI:–0.52, –0.29), work stress (SMD=0.54, 95%CI: 0.49, 0.58), attitude toward aggression and violence management (SMD=–0.38, 95%CI:–0.44, –0.32), and organizational climate (SMD=–0.47, 95%CI: –0.57, –0.36) (P <0.05). Sensitivity analysis confirmed the robustness of the meta-analysis results, and no significant publication bias was detected. Conclusion Nurses in China exhibit a high level of work alienation, particularly in high-acuity settings like emergency and intensive care unit departments compared to general departments. Shorter work experience (<5 years), lower professional title, lower monthly income (<5 000 CNY), and greater work stress are positively correlated with work alienation. In contrast, psychological capital, proactive attitudes toward managing aggression and violence, and a supportive organizational climate are negatively correlated. These findings indicate a need for nursing managers to develop targeted strategies based on these multifaceted factors to mitigate alienation among nursing staff.

ObjectiveTo explore the application of virtual reality biofeedback training combined with oral localization therapy in dysphagia after oral cancer surgery. MethodsFrom May, 2023 to July, 2024, 86 patients with dysphagia after oral cancer surgery in Zhejiang Provincial People's Hospital were randomly divided into control group (n = 43) and experimental group (n = 43). The control group received conventional swallowing function training, while the experimental group added virtual reality biofeedback training combined with oral positioning therapy, for four weeks. The Standardized Swallowing Function Assessment Scale (SSA), Functional Oral Intake Scale (FOIS) and M.D.Anderson Dysphagia Inventory (MDADI) were used for evaluation before intervention, and two weeks, four weeks and eight weeks after intervention. ResultsFor scores of SSA , the main effects of group (F = 150.190, P < 0.001, η²_p = 0.641) and time (F = 230.870, P < 0.001, η²_p = 0.733), as well as the interaction effect (F = 16.910, P < 0.001, η²_p = 0.168) were all significant. For scores of FOIS, the main effects of group (F = 59.601, P < 0.001, η²_p = 0.415) and time (F = 89.464, P < 0.001, η²_p = 0.516), as well as the interaction effect (F = 7.990, P < 0.001, η²_p = 0.087) were all significant. For scores of MDADI, the main effects of group (F = 33.133, P < 0.001, η²_p = 0.283) and time (F = 49.650, P < 0.001, η²_p = 0.371), as well as the interaction effect (F = 3.224, P = 0.023, η²_p = 0.037) were all significant. ConclusionVirtual reality biofeedback training combined with oral localization therapy could improve the swallowing function, oral feeding ability and overall quality of life of patients with dysphagia after oral cancer surgery.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

BACKGROUND:Periprosthetic joint infection is the most common cause of early failure after total knee replacement.The current methods of preventing periprosthetic joint infection by improving the surface of the prosthesis have limitations to varying degrees.OBJECTIVE:To construct a coating material that can stably improve the surface of the implant,prevent the initial floating bacterial infection of periprosthetic infection,and regulate the bone transfer function around the implant.METHODS:(1)Material preparation:YGF polypeptide(which promotes bone formation),LL-37 polypeptide(with antibacterial properties)and YGF+LL-37 composite peptide were prepared by Fmoc solid phase peptide synthesis technology.The titanium-based materials were immersed in the three polypeptide solutions for 2 hours to obtain YGF coating,LL-37 coating and composite peptide coating coated titanium sheets.(2)In vitro experiment:Uncoated titanium sheets and coated titanium sheets were co-cultured with Escherichia coli(or Staphylococcus aureus)and the colonies were counted by plate method.MC3T3 cells were inoculated on the surface of uncoated titanium sheet and coated titanium sheet,respectively.Alizarin red staining was used to observe the calcium salt deposition on the surface of the material.Western blot assay was used to detect the protein expression of RUNX2,osteocalcin,osteopontin,and bone morphogenetic protein 2.(3)Animal experiment:24 SD rats were randomly divided into three groups:the blank group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal;the control group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension;the experimental group(n=8)was implanted with composite peptide coated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension.After 5 weeks of implantation,micro-CT examination,hematoxylin-eosin staining and immunohistochemical staining of femur specimens were performed.RESULTS AND CONCLUSION:(1)In vitro experiment:Compared with uncoated titanium sheet and YGF coated titanium sheet,LL-37 coated and composite peptide coated titanium sheet could significantly inhibit the growth and reproduction of Escherichia coli and Staphylococcus aureus.Compared with uncoated titanium sheets and LL-37-coated titanium sheets,YGF-coated and composite peptide-coated titanium sheets could promote calcium salt deposition in osteoblasts and increase the protein expression of RUNX2,osteocalcin,osteopontin and bone morphogenetic protein 2.(2)Animal experiment:Micro-CT test showed that the control group had less bone mass than the blank group and the experimental group.Hematoxylin-eosin staining showed that there was a large amount of fibrous tissue around the nail channel in the control group,only a small amount of tissue fibrosis around the nail channel in the blank group,and only a small amount of tissue fibrosis around the nail channel in the experimental group.Immunohistochemical staining showed that the protein expression of interleukin 1β and tumor necrosis factor α in the control group was higher than that in the blank group and the experimental group,and the expression of osteocalcin,RUNX2 and osteopontin in the experimental group was higher than that in the blank group and the control group.(3)The results show that the titanium-based material coated with YGF+LL-37 composite peptide coating has good antibacterial ability and can promote bone transfer around the implant.

BACKGROUND:Periprosthetic joint infection is the most common cause of early failure after total knee replacement.The current methods of preventing periprosthetic joint infection by improving the surface of the prosthesis have limitations to varying degrees.OBJECTIVE:To construct a coating material that can stably improve the surface of the implant,prevent the initial floating bacterial infection of periprosthetic infection,and regulate the bone transfer function around the implant.METHODS:(1)Material preparation:YGF polypeptide(which promotes bone formation),LL-37 polypeptide(with antibacterial properties)and YGF+LL-37 composite peptide were prepared by Fmoc solid phase peptide synthesis technology.The titanium-based materials were immersed in the three polypeptide solutions for 2 hours to obtain YGF coating,LL-37 coating and composite peptide coating coated titanium sheets.(2)In vitro experiment:Uncoated titanium sheets and coated titanium sheets were co-cultured with Escherichia coli(or Staphylococcus aureus)and the colonies were counted by plate method.MC3T3 cells were inoculated on the surface of uncoated titanium sheet and coated titanium sheet,respectively.Alizarin red staining was used to observe the calcium salt deposition on the surface of the material.Western blot assay was used to detect the protein expression of RUNX2,osteocalcin,osteopontin,and bone morphogenetic protein 2.(3)Animal experiment:24 SD rats were randomly divided into three groups:the blank group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal;the control group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension;the experimental group(n=8)was implanted with composite peptide coated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension.After 5 weeks of implantation,micro-CT examination,hematoxylin-eosin staining and immunohistochemical staining of femur specimens were performed.RESULTS AND CONCLUSION:(1)In vitro experiment:Compared with uncoated titanium sheet and YGF coated titanium sheet,LL-37 coated and composite peptide coated titanium sheet could significantly inhibit the growth and reproduction of Escherichia coli and Staphylococcus aureus.Compared with uncoated titanium sheets and LL-37-coated titanium sheets,YGF-coated and composite peptide-coated titanium sheets could promote calcium salt deposition in osteoblasts and increase the protein expression of RUNX2,osteocalcin,osteopontin and bone morphogenetic protein 2.(2)Animal experiment:Micro-CT test showed that the control group had less bone mass than the blank group and the experimental group.Hematoxylin-eosin staining showed that there was a large amount of fibrous tissue around the nail channel in the control group,only a small amount of tissue fibrosis around the nail channel in the blank group,and only a small amount of tissue fibrosis around the nail channel in the experimental group.Immunohistochemical staining showed that the protein expression of interleukin 1β and tumor necrosis factor α in the control group was higher than that in the blank group and the experimental group,and the expression of osteocalcin,RUNX2 and osteopontin in the experimental group was higher than that in the blank group and the control group.(3)The results show that the titanium-based material coated with YGF+LL-37 composite peptide coating has good antibacterial ability and can promote bone transfer around the implant.

ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

Ulcerative colitis is a chronic relapsing inflammatory bowel disease. Modern research indicates that immune dysregulation resulting from disruptions in circadian rhythm is closely associated with its pathogenesis. Both Western chronomedicine and traditional Chinese medicine（TCM）" treatment based on temporal factors" emphasize the temporal relationship between natural rhythms and human physiology and pathology. The " midnight-noon and ebb-flow " theory represents the concrete application and deepening of TCM " treatment based on temporal factors" within the realm of chronomedicine. This article correlates the onset time of ulcerative colitis with specific periods in the " midnight-noon and ebb-flow"theory：the Mao period（05：00-07：00），when the yangming large intestine meridian of hand is dominant； the Si period（09：00-11：00），when the taiyin spleen meridian of foot is dominant； and the You period（17：00-19：00），when the shaoyin kidney meridian of foot is dominant. According to this perspective，if the disease manifests during the Mao period，the pathogenesis is attributed to dampnessheat accumulation and disorder of qi and blood. Treatment should focus on clearing heat，resolving dampness，and harmonizing qi and blood，using modified formulas such as Shaoyao Decoction or Baitouweng Decoction. If it occurs during the Si period，the pathogenesis involves spleen deficiency with dampness obstruction and disharmony of qi and blood. Treatment should focus on strengthening the spleen，eliminating dampness，and restoring qi and blood，using modified formulas such as Huangya Decoction or Shenling Baizhu Powder. If it presents during the You period，the pathogenesis is characterized by fire failing to warm earth，and consumption resulting in qi and blood leakage. Treatment should focus on warming the kidney and spleen，and securing qi and blood，using modified formulas such as Sishen Pill or Tianhun Decoction. In addition to oral administration of Chinese herbal medicine，comprehensive therapies including acupuncture，herbal enemas，and acupoint application can provide novel insights for the clinical diagnosis and treatment of ulcerative colitis.

ObjectiveTo develop a standardized classification model for traditional Chinese medicine （TCM） syndrome patterns of mixed hemorrhoids using multi-center real-world data， and unveil their distribution patterns and core risk factors， thereby providing evidence-based support for standardizing TCM syndrome differentiation and implementing precision interventions. MethodsA multi-center cross-sectional study was conducted， enrolling 13 283 mixed hemorrhoid patients from eight hospitals in Jiangsu Province between September 1st， 2023 and December 31st， 2024. DeepSeek-R1-Distill-Qwen-7B and LLaMA-3.3 large language models （LLM） were integrated with latent class analysis （LCA） to perform unsupervised learning and latent class modeling of TCM symptomatology. Potential risk factors were screened via univariate analysis， followed by logistic regression to identify independent risk factors for each syndrome pattern. ResultsThe model's performance indicators were stable and reliable across different clinical data types，i.e. in the outpatient records， past medical history （F1=99.7%）， current medical history （F1=94.9%）， and specialist examination （F1=90.7%）； in inpatient records， past medical history （F1=98.2%）， current medical history （F1=91.2%）， specialist examination （F1=90.3%）， and discharge status （F1=90.6%）. Latent class mode-ling identified four core TCM syndrome patterns including spleen deficiency and qi sinking syndrome （915 cases， 6.89%）， damp-heat pouring downward syndrome （10 820 cases， 81.46%）， qi stagnation and blood stasis syndrome （1252 cases， 9.43%）， and wind injuring intestinal collaterals syndrome （296 cases， 2.22%）， with respective latent class probabilities of 0.069， 0.815， 0.094， and 0.022. Logistic regression demonstrated that gender， age， disease duration， hypertension， diabetes， hyperlipidemia， constipation， smoking history， and alcohol consumption were independent risk factors for pattern differentiation （P＜0.05）. The efficacy validation evaluation revealed that the cure rates for patients with spleen deficiency and qi sinking syndrome and qi stagnation and blood stasis syndrome were higher than those for patients with damp-heat pouring downward syndrome （adjusted P＜0.05）， with no statistically significant differences among other syndrome patterns. ConclusionDamp-heat pouring downward syndrome is the predominant syndrome in mixed hemorrhoids. Gender， age， disease duration， hypertension， diabetes， hyperlipi-demia， constipation， smoking history， and alcohol consumption are independent risk factors for the differentiation of syndrome types.