Multidrug-resistant (MDR) bacterial infections have emerged as a serious challenge of global public health crisis. The overuse and misuse of conventional antibiotics have dramatically accelerated the emergence, evolution and worldwide spread of drug-resistant bacterial strains, necessitating urgent exploration of novel antibacterial strategies. Bacteriophages serve as natural bacterial predators offering distinct advantages including high host specificity, autonomous self-replication capabilities and cost-effective large-scale production. However, wild-type phages present significant clinical limitations due to their narrow host ranges, susceptibility to rapid immune clearance and poor penetration of bacterial biofilms, which severely restrict their therapeutic applications. The convergence of synthetic biology, nanotechnology and advanced gene editing technologies has accelerated the development of engineered bacteriophage platforms, providing programmable, scalable and clinically translatable pathways to overcome these inherent biological constraints. Here, we systematically delineate four fundamental strategies for engineered bacteriophage development. Chemical modification utilizes reactive functional groups such as amino, carboxyl and thiol moieties on capsid proteins through esterification, amidation or click chemistry reactions to achieve precise drug conjugation and surface functionalization. In vivo editing encompasses ultraviolet or chemical mutagenesis for random mutation induction, homologous recombination for targeted genetic alterations, recombineering methodologies including electroporation-mediated bacteriophage recombination engineering, and CRISPR-Cas systems for precise genome editing to enable exact genetic reconstruction and host range reprogramming. In vitro synthesis leverages genome engineering platforms where intact phage genomes are transferred into yeast or host bacteria to facilitate highly efficient homologous recombination, enabling large DNA fragment assembly and cross-gene host range expansion without bacterial toxicity constraints. Directed evolution combines artificial selection through mutation library screening with rational design approaches involving chimeric receptor binding protein construction or site-specific mutagenesis, effectively balancing the discovery of unknown adaptive pathways with targeted host specificity modification. Moreover, we comprehensively discuss therapeutic applications across diverse clinical scenarios. Engineered bacteriophage effectively disrupt bacterial biofilms through sophisticated functionalized delivery platforms including nanozyme-conjugated phages, phage-liposome nanoconjugates and bio-responsive hydrogels, demonstrating significantly enhanced bactericidal efficiency compared to unmodified free phages. These bioengineered vectors attenuate bacterial virulence and resensitize pathogens to antibiotics by delivering CRISPR-Cas systems or base editors to disrupt critical virulence factors such as pili, capsule synthesis machineries and quorum sensing systems, or by inactivating antibiotic resistance determinants including beta-lactamase genes. As an intelligent nanomedicine delivery platform, engineered bacteriophage enable precise pathogen elimination an through photocatalytic reactive oxygen species generation, immunomodulatory interventions, or controlled release of antibacterial drugs. Furthermore, oral administration of engineered bacteriophage facilitates microbiota modulation, which selectively eliminate intestinal pathogens while preserve beneficial commensal microbiota, thereby restoring microbial community balance and preventing complications associated with dysbiosis. Finally, we critically analyze persistent challenges including host strain matching complexity, evolution of bacterial resistance mechanisms, pharmacokinetic optimization requirements, optimal administration route selection, large-scale production quality control standards and clinical dosing determination protocols. Through multidisciplinary integration of synthetic biology, infectious disease medicine and immunology, future translational medicine studies of bacteriophage should establish comprehensive technical platforms encompassing rapid phage screening, intelligent rational design, rigorous in vivo evaluation and standardized clinical validation processes, ultimately advancing engineered bacteriophage from laboratory innovations to clinically approved therapeutics for effectively combating MDR bacterial infections.

Objective To investigate the risk factors for pneumonia complicating infectious mononucleosis(IM)in adults and construct a nomogram prediction model.Methods A retrospective analysis was conducted on 198 IM patients admitted to the Second Affiliated Hospital of Air Force Medical University from January 2015 to December 2021.Patients were divided into pneumonia group(n=52)and non-pneumonia group(n=146)based on whether pulmonary infection occurred during hospitalization.The baseline data(age,gender,place of onset,etc.),clinical manifestations(maximum body temperature,lymph node enlargement,splenomegaly,etc.),and inflammatory indicators[white blood cell count(WBC),C-reactive protein(CRP),etc.]were compared between the two groups.Kaplan-Meier curves were plotted to analyze the key indicators affecting the hospital stay of IM patients.Multivariate logistic regression was used to analyze the independent risk factors for pneumonia complicating IM in adults and construct a nomogram prediction model based on the identified risk factors.The predictive efficacy of the model was evaluated using the receiver operating characteristic(ROC)curve and the consistency of the model was assessed using the calibration curve.The fit of the model was evaluated using the Hosmer-Lemeshow test.Additionally,the sensitivity,specificity,and accuracy of the model were assessed using confusion matrix.Results Compared with non-pneumonia group,the pneumonia group had a significantly higher proportion of patients from rural areas,with body mass index(BMI)≥24 kg/m2,smoking history,hepatomegaly,fever duration of≥7 d,as well as increased total hospitalization costs and average daily hospitalization costs,and prolonged hospital stay(P<0.05).The proportion of patients with a history of antibiotic use was lower in the pneumonia group(P<0.05).Kaplan-Meier survival analysis showed that patients from rural areas,with BMI≥24 kg/m2,smoking history,no prophylactic use of antibiotics,fever duration≥7 d,and hepatomegaly had significantly prolonged hospital stays(P<0.05).Multivariate logistic regression analysis revealed that living in a rural area(OR=4.089,P<0.05),hepatomegaly(OR=4.082,P<0.05),and elevated WBC(OR=1.205,P<0.05)were independent risk factors for pneumonia complicating IM in adults,while the prophylactic use of antibiotics(OR=0.142,P<0.05)was an independent protective factor.The area under the ROC curve of the constructed nomogram prediction model was 0.827(95%CI 0.762-0.892),and the slope of the calibration curve was close to 1,and the Hosmer-Lemeshow test showed χ2=5.299,P=0.725,indicating good consistency and fit of the prediction model.The results of the confusion matrix assessment showed that the sensitivity of the model was 0.669(0.624-0.773),the specificity was 0.827(0.724-0.930),and the accuracy was 0.732(0.665-0.793).Conclusion The nomogram prediction model based on place of onset,hepatomegaly,the prophylactic use of antibiotics and WBC has excellent fit and discrimination,providing an effective quantitative tool for prognosis assessment of IM.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective:This study aimed to investigate the characteristic expression of programmed death-ligand 2(PD-L2)and epithelial-mesenchymal transition(EMT)-related biomarkers in head and neck squamous cell carcinoma(HNSCC)and their mechanism of action in HNSCC metastasis.Methods:Tumor tissue samples from 94 patients with HNSCC were collected from Tianjin Medical University Cancer Hos-pital from January 2018 to July 2023,and their correlation with clinicopathological parameters,including lymph node metastasis,was statist-ically assessed.Western blot was used to detect PD-L2 expression in HNSCC tumor tissues.PD-L2 overexpression and knockdown stably-transfected monoclonal cell lines were generated using lentiviral vectors.Transwell assays were performed to explore the effect of PD-L2 on the invasive migration of the HNSCC cell lines.Additionally,RNA sequencing was used to identify downstream target genes regulated by PD-L2.The expression levels of key EMT markers,including E-cadherin,N-cadherin,and Vimentin,were examined by Western blot to elucidate the molecular mechanism by which PD-L2 promotes tumor cell metastasis through EMT pathway activation.Additionally,RNA sequencing was employed to identify downstream target genes regulated by PD-L2.The expression levels of key EMT markers,including E-cadherin,N-cadherin,and Vimentin,were examined with Western blot analysis to elucidate the molecular mechanism by which PD-L2 promotes tumor cell metastasis through the EMT pathway activation.Results:High expression of PD-L2 is positively correlated with N staging(P<0.05),and elevated PD-L2 expression predicts a poor prognosis in HNSCC patients.Conclusions:PD-L2 regulates the EMT pathway to promote HNSCC metastasis.Targeting PD-L2 is expected to provide a new strategy for the treatment of metastatic HNSCC.

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

OBJECTIVE: To explore the clinical features and genetic characteristics of three patients with Infantile liver failure syndrome type 2 (ILFS2). METHODS: Three children who were diagnosed with ILFS2 at the Children's Hospital Affiliated to Zhengzhou University from February 2023 to February 2024 were selected as the study subjects. Clinical data of the children were collected. Peripheral blood samples of the children and their parents were collected and subjected to whole exome sequencing (WES). Candidate variants of the NBAS gene were verified by Sanger sequencing. This study was approved by the Ethics Committee of the Children's Hospital Affiliated to Zhengzhou University (Ethics No. 2024-k-069). RESULTS: The three children had presented with fever-triggered recurrent acute liver failure. All of them were found to harbor compound heterozygous variants of the NBAS gene, including c.3596G>A and c.1181A>T in child 1, c.2617C>T and c.2T>C in child 2, and c.3596G>A and c.2817_2818insT in child 3. Among these, the c.1181A>T and c.2817_2818insT variants were unreported previously. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), they were respectively classified as variants of uncertain significance (PM2_Supporting+PM3+PP3) and pathogenic (PVS1+PM2_Supporting+PM3). CONCLUSION Combined with the patient's clinical phenotype, the compound heterozygous variants of the NBAS gene probably underlay the pathogenesis of ILFS2 in the three children. For children with fever-related acute liver failure of unknown causes, the possibility of this disease should be suspected, and genetic testing may facilitate the diagnosis. Early diagnosis and timely intervention can significantly improve the prognosis. Discoveries of the c.1181A>T and c.2817_2818insT variants have enriched the mutational spectrum of the NBAS gene.
Humans ; Exome Sequencing ; Genetic Testing/methods* ; Liver Failure, Acute/etiology* ; Mutation ; Child ; Adult ; Neoplasm Proteins

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.