ObjectiveTo evaluate the efficacy and safety of Janus kinase （JAK） inhibitors combined with Chinese herbal medicine （CHM） in treating rheumatoid arthritis （RA）. MethodsClinical data from 169 RA patients were retrospectively collected. Among them， 71 cases received JAK inhibitors as the control group， while 98 cases received JAK inhibitors plus CHM as the observation group， both treated for 24 weeks. The rheumatoid factor （RF）， cyclic citic peptide antibody （anti-CCP）， erythrocyte sedimentation rate （ESR）， C-reactive protein （CRP）， and white blood cell count （WBC） were recorded before and after treatment. Databases including CNKI， Wanfang， VIP， PubMed and Web of Science were searched from inception till August 31st， 2025 for randomized controlled trials （RCTs） on the combined use of JAK inhibitors and CHM for RA. The methodological quality of the included studies was evaluated using the risk of bias assessment tool. Meta-analyses were performed for RF， anti-CCP， ESR， CRP， 28-joint disease activity score （DAS28）， overall clinical effective rate， and incidence of adverse events. Sensitivity analysis were also performed. ResultsThe retrospective study demonstrated that after treatment， ESR， CRP， and anti-CCP levels decreased in the observation group， while ESR and CRP levels decreased in the control group （P＜0.05）. Moreover， ESR and RF levels in the observation group were lower than those in the control group （P＜0.05）. A total of 9 RCTs involving 770 patients were included in the meta-analysis. The results indicated that the JAK inhibitors plus CHM group was superior to the JAK inhibitors group in reducing RF （MD=-8.97， 95%CI -15.01 to -2.94， P=0.004）， CRP （MD=-3.34， 95%CI -3.82 to -2.86， P＜0.001）， ESR （MD=-5.33， 95%CI -7.98 to -2.69， P＜0.001）， and DAS28 score （MD=-0.54， 95%CI -0.74 to -0.34， P＜0.001）， as well as in improving the overall clinical effective rate （OR=4.53， 95%CI 2.55 to 8.03， P＜0.001）. No statistically significant differences were observed between groups in anti-CCP levels （SMD=-2.08， 95%CI -4.41 to 0.24， P=0.080） or incidence of adverse events （OR=0.93， 95%CI 0.55 to 1.57， P=0.790）. ConclusionThe combination of JAK inhibitors and CHM demonstrates remarkable efficacy in treating RA， contributing to improved disease activity and reduced inflammatory markers with a favorable safety profile.

Objective To investigate the diagnostic value of our regression model based on quantitative parameters of dual-energy CT and clinical features for stages T2 and T3 colorectal cancer.Methods A cross-section study was performed on 91 patients with colorectal cancer confirmed by postoperative pathology in our hospital from January 2022 to November 2023.All of them underwent dual-energy CT examination.According to the pathological T staging criteria of Chinese Colorectal Cancer Diagnosis and Treatment Standard(2020 Edition),they were divided into T2 group(n=43)and T3 group(n=48).Univariate analysis was used to compare the differences in quantitative CT parameters and clinical features between the 2 groups,and the obtained significant variables were employed to construct diagnosis models by univariate or multivariate logistic regression analysis.The area under receiver operating characteristic curve(AUC)of the CT parametric model and the model combined with clinical features was compared to evaluate the efficacy of diagnosing T2 and T3 stages.Results Univariate analysis showed that carcinoembryonic antigen(CEA),N stage,tumor location,tumor longest diameter(LD),CT value of virtual noncontrast(CT-VNC),fat fraction,electron density(Rho)and dual energy index(DEI)were significantly different between the T2 and T3 groups(P＜0.05).Multivariate logistic regression analysis found that N stage,tumor location,LD,fat fraction and DEI were independent risk factors for the diagnosis of stage T3.The AUC value of the model of above CT parameters in diagnosing stage T3 colorectal cancer was 0.671(95％CI:0.558～0.783),and the AUC value of the combined model of above CT parameters and clinical features was 0.886(95％CI:0.815～0.957),and statistical difference was observed in the AUC value between the combined model and the CT parametric model(P＜0.01).Conclusion The regression model constructed with dual-energy CT quantitative parameters combined with clinical features has high value in the preoperative diagnosis of stages T2 and T3 colorectal cancer before surgery.

Organophosphorus nerve agents are the most threatening chemical warfare agents and terrorist agents.The number of nerve agents and their related chemicals involved in the verification of Chemical Weapon Convention(CWC)exceeds ten million,with the majority being isomers.Accurate structural identification of these chemicals has always been one of the challenges in CWC related verification analysis.In this work,a total of 17 kinds of alkyl phosphonate isomers and structural analogs from 5 groups were designed and synthesized,and then analyzed by gas chromatography-mass spectrometry(GC-MS)and gas chromatography-infrared spectroscopy(GC-FTIR).The spectra of isomers or structural analogs obtained from two techniques as well as the structural information provided therein were compared and analyzed.The results showed that for isomers or structural analogs with similar MS spectra,FTIR spectra could provided more structural fingerprint information of compounds and had advantages in confirming structures.Combined with the excellent separation ability of GC,GC-FTIR can be used to assist GC-MS in the structural confirmation of alkyl phosphates,achieving rapid and accurate identification of isomers or structural analogues.

Due to the immaturity of visualization and quantitative analysis methods,the utilization rate of level 3 characteristics is seriously insufficient.In this work,based on the wet-membrane method and scanning electrochemical microscopy(SECM),and the introduction of conductive black ink to enhance the visualization effect,a systematic level 3 feature quantitative method was developed.Firstly,the feasibility and effect of the multi-level characteristics extraction strategy of latent fingerprints was investigated.Then,the influences of various deposition conditions on the level 3 features were explored.The results showed that the higher the deposition pressure,the wider the ridges,and the smaller the pore size.Moreover,excessive oil content could cause the pore size to be smaller and even been covered.Subsequently,the quantitative method was established from various pore characteristics such as pore number,pore activity,pore size,pore-to-pore distance and pore-to-pore angle.The stability of the level 3 features(pore number,pore-to-pore distance and pore-to-pore angle)was confirmed via repeated experiments on the same fingerprint region.After stability test,the recognition ability of three indicators was investigated for different fingerprints,verifying the uniqueness of pore-to-pore distance and pore-to-pore angle.Finally,a multiple recognition strategy was proposed that combined frequency distribution fitting curves for pore-to-pore distance and angle with other level 3 details,and was successfully applied to incomplete fingerprint recognition.This ink-enhanced optical and electrochemical extraction method and quantitative analysis provided a new path for fingerprint recognition.

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

Introducing fingerprint level 3 features(especially sweat pores)in fingerprint recognition can significantly improve the value of fingerprints.However,conventional fingerprint visualization methods suffer from issues such as poor stability and reproducibility,insufficient resolution,and feature masking in detecting level 3 features.Electrospun membrane has unique advantages in latent fingerprint(LFP)detection due to its excellent adsorption performance and high specific surface area,and thus its application potential in LFP visualization urgently need to be explored.A novel pore visualization method based on core-shell structured PAN-Flu/PVP composite nanofibrous membrane was proposed in this work.Specifically,the PAN-Flu/PVP composite nanofibrous membrane was prepared via coaxial electrospinning technology,with polyacrylonitrile(PAN)loaded with fluorescein(Flu)as the core and polyvinylpyrrolidone(PVP)as the shell.The experimental results showed that the prepared PAN Flu/PVP composite nanofibrous membrane had a porous structure and excellent adsorption performance.Based on the water solubility of the outer shell PVP and the water induced fluorescence enhancement effect of the core Flu,high-resolution visualization of sweat pores could be achieved within 2 s.The optimization experiment showed that the best quality of sweat latent fingerprints was obtained when the Flu content was 4 mg/mL,the spinning time was 1 h,and the sweating time was 2 min.Through repeated fingerprinting and live fingerprint comparison experiment,the strong stability and high reproducibility of the as-produced membrane in displaying fingerprint sweat pores were finally verified.In summary,the development method could quickly,stably and accurately extract the spatial distribution and activity level of fingerprint sweat pores,which was of great significance for improving the utilization and value of fingerprints.

6-gingerol, a bioactive compound from ginger, has demonstrated promising anticancer properties across various cancer models by inducing apoptosis and inhibiting cell proliferation and invasion. In this study, we explore its mechanisms against glioblastoma multiforme (GBM), a notably aggressive and treatment-resistant brain tumor. We found that 6-gingerol crosses the blood-brain barrier more effectively than curcumin, enhancing its potential as a therapeutic agent for brain tumors. Our experiments show that 6-gingerol reduces cell proliferation and triggers apoptosis in GBM cell lines by disrupting cellular energy homeostasis. This process involves an increase in mitochondrial reactive oxygen species (mtROS) and a decrease in mitochondrial membrane potential, primarily due to the downregulation of manganese superoxide dismutase (MnSOD). Additionally, 6-gingerol reduces ERK phosphorylation by inhibiting EGFR and RAF, leading to G1 phase cell cycle arrest. These findings indicate that 6-gingerol promotes cell death in GBM cells by modulating MnSOD and ROS levels and arresting the cell cycle through the ERFR-RAF-1/MEK/ ERK signaling pathway, highlighting its potential as a therapeutic agent for GBM and setting the stage for future clinical research.

A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size