OBJECTIVE To explore and establish a full-cycle management model for drug traceability codes that aligns with national policy requirements and the practical needs of healthcare institutions， thereby enhancing the refinement of drug management and the level of medication safety. METHODS A tripartite strategy integrating “hardware deployment， system transformation， and process re-engineering” was adopted. This involved the introduction of intelligent identification devices （personal digital assistant， high-definition industrial reader）， the modification of the hospital information system interface， and the re-engineering of workflows （drug warehousing， dispensing and distribution， drug withdrawal， uploading to the insurance platform） to achieve comprehensive， informatized collection and association of drug traceability codes throughout all stages. RESULTS A full-cycle management model for drug traceability codes was successfully established， realizing the goals of making drugs “traceable to their source， trackable in their distribution， and accountable in their responsibility”. The patient waiting time for medication dispensing before and after the implementation was [3.08（1.67，5.58）] min and [3.28（1.77，5.98）] min， respectively. Among them， the patient waiting time under the pre-preparation mode was [3.60（2.13，6.35）] min and [3.50（2.03，6.30）] min， respectively； the patient waiting time under the real-time mode was [2.05（0.83，4.03）] min and [2.78（1.18，5.38）] min， respectively； the number of dispensing errors was 3， 0， respectively； the staffing of relevant positions had not been increased. CONCLUSIONS The drug traceability code management model constructed from a full-cycle perspective effectively meets national policy requirements. It provides data support for refined hospital management and offers solid technical and procedural safeguards for ensuring patient medication safety and strengthening medical insurance fund supervision， demonstrating practical value.

OBJECTIVE To formulate Guidelines for the standardized implementation of pharmacist-managed clinics （ 2026 edition ） in response to the challenges faced by such clinics in China， including uneven development， large discrepancies in service specifications， insufficient patient awareness， and limited medical insurance coverage. METHODS Led by the Pharmaceutical Affairs Professional Committee of the Chinese Hospital Association， the Evidence-based Pharmacy Professional Committee of the Chinese Pharmaceutical Association， and the Hospital Pharmacy Professional Committee of the Cross-strait Medical and Health Exchange Association， a total of 19 domestic hospital pharmacy experts were organized. Through a systematic review of national policies and literature research， current practical experience was summarized. Consensus on the contents of the guidelines was reached after in-depth discussions. RESULTS &CONCLUSIONS The guidelines covered five sections： definition and connotation of pharmacist-managed clinics， establishment requirements， implementation and management， post competency， and practical research. Firstly， the definition and connotation included three operational forms of pharmacist-managed clinics （independent mode， physician-pharmacist joint mode， and online pharmacist-managed clinic mode） and classified service modes （specialty-specific， drug-specific， and disease-specific pharmacist-managed clinics）. The establishment requirements were further refined， covering system construction （pharmaceutical service management system， quality control and assessment mechanism）， personnel qualifications （professional credentials， continuing education and professional training， etc）， service recipients， as well as service venues and facilities. Subsequently， the implementation and management of pharmacist-managed clinics were proposed， involving service procedures， intervention measures， documentation and records， patient education and follow-up， humanistic care， as well as risk management and quality control. Finally， post competency encompassed the competency requirements for pharmacists providing services in pharmacist-managed clinics， as well as the suggestions on teaching methods； practical research encouraged the conduct of high-quality pharmaceutical practice in the setting of pharmacist-managed clinics. The guidelines provide valuable guidance for the standardized implementation of pharmacist-managed clinics in China in terms of establishment， management， teaching， and research， fill the guideline gap in this field， and can promote the high-quality development of pharmacist-managed clinics.

Objective: To identify early clinical predictors associated with dysphagia and delayed swallowing recovery in patients with traumatic brain injury (TBI). Methods: In this retrospective study, we enrolled adult TBI patients admitted to the rehabilitation unit of a tertiary medical center between June 2019 and June 2023. Data on baseline characteristics, neurological status, imaging findings, and rehabilitation-related variables were collected. Swallowing function was assessed using two indicators: (1) nasogastric (NG) tube retention and (2) the Functional Oral Intake Scale (FOIS) scores at 1, 4, and 12 weeks post-injury. Regression analyses were conducted to identify predictors associated with dysphagia and swallowing recovery. Results: A total of 160 patients were included. At 1 week post-injury, longer intensive care unit (ICU) stay, poor initial sitting balance and use of sedative medication in ICU were associated with NG tube retention. At 4 weeks, lower initial Rancho Los Amigos Scale (RLAS) scores, immobility-related complications, longer hospitalization, and temporal lobe hematomas were associated with persistent NG tube dependence. By 12 weeks, older age, delayed ability to follow commands, and poor initial sitting balance remained associated with NG tube retention. FOIS outcomes were also associated with older age, delayed time to follow commands, impaired initial sitting balance, prolonged ICU stay, temporal lobe hematomas, lower initial RLAS scores, immobility-related complications, prolonged endotracheal tube placement and extended hospital stays. Conclusion Impaired cognitive status, poor physical function, immobility-related complications, and temporal lobe hematomas were key factors associated with dysphagia and delayed oral intake in individuals with TBI.

Background: Cerebral hypoxia-ischemia impairs brain development in extremely preterm infants and is associated with poor neurological outcomes. Near-infrared spectroscopy (NIRS) is a noninvasive continuous monitoring method for regional cerebral oxygen saturation (rcSO2).Purpose: This study evaluated the clinical feasibility and neurological impact of a neurocritical care bundle that incorporates prolonged multidisciplinary hemodynamic monitoring and a stepwise management algorithm. Methods: Preterm infants with a gestational age (GA) ≤28 weeks or birth weight (BW) ≤1,000 g were prospectively enrolled in a bundle group subjected to NIRS for rcSO2, electrical cardiometry for cardiac output, and daily brain and cardiac echography during the first 72 hours of life. Monitoring was repeated weekly in the first month and then monthly until discharge or the term-equivalent age (TEA) was reached. We implemented a stepwise management algorithm for treating cerebral hypoxia. The primary outcome was a composite of mortality and adverse neurological events (structural abnormalities or electroencephalogram-confirmed seizures) before discharge. The secondary outcomes were the physiological pattern of rcSO2 within the initial 72 hours and up to discharge or TEA. Results: Thirty preterm infants (GA, 27.1±2.0 weeks; BW, 830±225 g) were enrolled in the bundle group. The mean time-averaged rcSO2 (66.8%±10.3%) was not associated with GA or BW. However, postnatal age appeared to influence physiological rcSO2 changes, given that rcSO2 values were higher during the initial 72 hours than at subsequent intervals. Seven infants (23.3%) had poor outcomes and significantly lower time-averaged rcSO2 (51.1% [50.0%–65.2%] vs. 71.8% [67.1%–73.1%], P=0.002). Multivariate regression indicated that a lower rcSO2 was an independent risk factor, and a 65% threshold showed an optimal predictive value for poor outcomes. Conclusion The neurocritical care bundle helped identify preterm infants at risk of cerebral hypoxia, and lower rcSO2 was an independent risk factor for composite mortality and adverse neurological outcomes.

To address the growing challenge of an increasing number of elderly lung cancer patients amidst China's aging population and to fill the gap in quality control standards for surgical treatment in this special population, this study aimed to develop a standardized surgical evaluation system for elderly lung cancer patients tailored to China's national conditions. The system was established through a literature review, integrated the pathophysiological characteristics of elderly patients, and was constructed following review, feedback, and revision by experts from multiple thoracic surgery centers. Employing a 100-point scoring system, it comprises three primary domains: physical infrastructure and geriatric adaptability foundational conditions (10 points); management level and perioperative care models (20 points); and technical proficiency and clinical outcomes (70 points). The system places a strong emphasis on geriatric adaptability, proposing specific, quantifiable indicators for age-friendly facility modifications, control of elderly-specific complications, multidisciplinary collaboration, and standardized perioperative management. It provides a convenient and measurable assessment tool for quality control in the surgical treatment of elderly lung cancer in China, which is expected to promote the standardization and homogenization of diagnosis and treatment.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Background/Aims: Metabolic dysfunction-associated steatohepatitis (MASH) is a significant risk factor for gallstone formation, but mechanisms underlying MASH-related gallstone formation remain unclear. Golgi membrane protein 1 (GOLM1) participates in hepatic cholesterol metabolism and is upregulated in MASH. Here, we aimed to explore the role of GOLM1 in MASH-related gallstone formation. Methods: The UK Biobank cohort was used for etiological analysis. GOLM1 knockout (GOLM1-/-) and wild-type (WT) mice were fed with a high-fat diet (HFD). Livers were excised for histology and immunohistochemistry analysis. Gallbladders were collected to calculate incidence of cholesterol gallstones (CGSs). Biles were collected for biliary lipid analysis. HepG2 cells were used to explore underlying mechanisms. Human liver samples were used for clinical validation. Results: MASH patients had a greater risk of cholelithiasis. All HFD-fed mice developed MASH, and the incidence of gallstones was 16.7% and 75.0% in GOLM1-/- and WT mice, respectively. GOLM1-/- decreased biliary cholesterol concentration and output. In vivo and in vitro assays confirmed that GOLM1 facilitated cholesterol efflux through upregulating ATP binding cassette transporter subfamily G member 5 (ABCG5). Mechanistically, GOLM1 translocated into nucleus to promote osteopontin (OPN) transcription, thus stimulating ABCG5-mediated cholesterol efflux. Moreover, GOLM1 was upregulated by interleukin-1β (IL-1β) in a dose-dependent manner. Finally, we confirmed that IL-1β, GOLM1, OPN, and ABCG5 were enhanced in livers of MASH patients with CGSs. Conclusions In MASH livers, upregulation of GOLM1 by IL-1β increases ABCG5-mediated cholesterol efflux in an OPN-dependent manner, promoting CGS formation. GOLM1 has the potential to be a molecular hub interconnecting MASH and CGSs.