ObjectiveTo explore the mechanism by which the ethanol extract of Epimedium brevicornu （EEBM） intervenes in mesenchymal adipose-derived stem cells （ADSCs） to delay aging in castrated rats. MethodsForty-five 3-month-old SPF female SD rats were ovariectomized and randomly divided into model group， ADSCs treatment group， and ADSCs groups treated with low， medium， and high concentrations of EEBM （1， 50， 100 μg·L^-1）， referred to as the AE low， medium， and high concentration groups， with 9 rats in each group. After tail vein injection of 200 μL of the corresponding stem cell suspension， aging-related indicators including cyclin-dependent kinase inhibitor （p21）， tumor suppressor gene （p53）， interleukin-6 （IL-6）， interleukin-8 （IL-8）， superoxide dismutase （SOD）， malondialdehyde （MDA）， B-cell lymphoma-2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cysteine-aspartic acid protease-3 （Caspase-3）， and lipofuscin were measured using enzyme-linked immunosorbent assay （ELISA） and Western blot. ResultsCompared with the model group， the IL-6 content in the AE low， medium， and high concentration groups was significantly decreased （P<0.05）. Lipofuscin， MDA， and IL-8 levels in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.01）， while SOD content was significantly increased （P<0.05， P<0.01）. Compared with the ADSCs treatment group， lipofuscin and IL-8 levels in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）. The MDA content was significantly decreased in the AE medium concentration group （P<0.01）. Compared with the model group， protein levels of p21， p53， Bax， and Caspase-3 in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， while the Bcl-2 protein level was significantly increased （P<0.01）. Compared with the ADSCs treatment group， protein levels of p21， p53， Bax， and Caspase-3 in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， and the Bcl-2 protein level in the AE low concentration group was significantly increased （P<0.01）. ConclusionThe results of this experiment show that EEBM-treated ADSCs or ADSCs may delay aging in castrated rats by inhibiting cell apoptosis， reducing cell cycle inhibitors and pro-inflammatory factors， enhancing antioxidant capacity， and reducing oxidative reactions. Moreover， EEBM-treated ADSCs demonstrate stronger anti-aging effects than ADSCs alone. This study provides experimental evidence supporting the clinical use of EEBM to intervene in ADSCs and delay aging.

OBJECTIVE To provide technical support for improving recognition rate of adverse drug events （ADEs） related to traditional Chinese medicine （TCM） formula granules and decoction pieces among inpatient patients. METHODS By referencing the global trigger tool （GTT） whitepaper， literature on adverse reactions to TCM， and expert review opinions， ADE trigger items for TCM formula granules and decoction pieces used in the inpatients were established. GTT was applied to analyze ADEs in inpatients who had used TCM formula granules and decoction pieces in our hospital from August 2013 to August 2023， utilizing the Chinese Hospital Pharmacovigilance System. The effectiveness of GTT and the characteristics of these ADEs were analyzed. RESULTS A total of forty-eight triggers were established， including thirty-two laboratory test indexes， thirteen clinical symptoms， and three antidotes. Among the 1 682 patients included， GTT identified 652 potential ADEs， 284 true positive ADEs，with a trigger rate of 38.76% and a positive predictive value of 43.56%. After review by the auditor， 278 cases of ADEs were finally confirmed， with an incidence rate of 16.53%， significantly higher than the number of spontaneously reported ADEs during the same period （0）. The 278 cases of ADEs were mostly grade 1 （223 cases）， mainly involving hepatobiliary system， gastrointestinal system， blood- lymphatic system， etc；a total of 219 types of TCMs are involved，and the top five suspected TCMs used at a frequency higher than 1% were Poria cocos， Codonopsis pilosula， Atractylodes macrocephala， fried Glycyrrhiza uralensis， and Scutellaria baicalensis. CONCLUSIONS The established GTT can improve the recognition rate of ADEs for hospitalized patients using traditional Chinese medicine formula granules and decoction pieces.

BACKGROUND:Socket-shield technique can effectively maintain labial soft and hard tissues,but the incidence of postoperative complications such as exposure and displacement of root shield is relatively high.It is speculated that the root shield may be exposed and displaced due to excessive load after long-term function of dental implants. OBJECTIVE:Through three-dimensional finite element analysis,we aim to study the influence of varying root shield thicknesses on the stress distribution,equivalent stress peaks,and displacement in the root shield,periodontal ligaments,implant,and surrounding alveolar bone under normal occlusal loading.We also attempt to analyze the correlation between the thickness of the root shield and occurrence of mechanical events such as root shield exposure,displacement,and fracture. METHODS:Cone-beam CT data of a patient who met the indication standard of socket-shield technique for maxillary central incisor were retrieved from database.Reverse engineering techniques were used to build models of the maxillary bone and root shield,while forward engineering was used to create models for the implant components based on their parameters.Models depicting various root shield thicknesses(0.5,1.0,1.5,and 2.0 mm)were created using Solidworks 2022 software.ANSYS Workbench 2021 software was then used to simulate and analyze the effects of varying root shield thicknesses on stress distribution,equivalent stress peaks,and displacement of the root shields,periodontal ligaments,implants,and surrounding alveolar bone under normal occlusion. RESULTS AND CONCLUSION:(1)In all root shield models,the stress was concentrated on the palatal cervical side,both sides of the edges and the lower edge of the labial side.As the thickness of the root shield increased,the equivalent stress peak and displacement showed a decreasing trend.The 0.5 mm thickness model produced a stress concentration of 176.20 MPa,which exceeded the yield strength(150 MPa)of tooth tissue.(2)The periodontal ligament stress in each group was concentrated in the neck margin and upper region.With the increase of root shield thickness,the equivalent stress peak and displacement of periodontal ligament showed a decreasing trend.(3)Implant stress in all models was concentrated in the neck of the implant and the joint of the implant-repair abutment,and the labial side was more concentrated than the palatal side.With the increase of root shield thickness,the equivalent stress peak of the implant in the model showed an increasing trend.(4)In each group of models,stress of cortical bone concentrated around the neck of the implant and the periphery of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the equivalent stress peak around the root shield decreased;the peak value of the equivalent stress of the bone around the neck of the implant showed an increasing trend.In the model,the stress of cancellous bone was mainly concentrated around the neck of the lip of the implant,the top of the thread,the root tip and the lower margin of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the peak value of the equivalent stress of the bone around the root shield in the model showed a decreasing trend.The minimum principal stress of cortical bone in each group of models was concentrated around the neck of the implant,exhibiting a fan-shaped distribution.As the thickness of the root shield increased,the minimum principal stress of cortical bone showed an increasing trend.(5)These results indicate that different thicknesses of the root shield have different biomechanical effects.The root shield with a thickness of 0.5 mm is easy to fracture.For patients with sufficient bone width,the root shield with a thickness of 2.0 mm is an option to reduce the risk of complications such as root shield exposure,fracture,and displacement.Meanwhile,it should be taken into account to protect the periodontal ligament in the preparation process,and rounding treatments ought to be carried out on both sides and the lower edge of the root shield.

BACKGROUND:Human periodontal ligament stem cells are potential functional cells for periodontal tissue engineering.However,long-term in vitro culture may lead to reduced stemness and replicative senescence of periodontal ligament stem cells,which may impair the therapeutic effect of human periodontal ligament stem cells. OBJECTIVE:To investigate the effect of oxymatrine on the stemness maintenance and osteogenic differentiation of periodontal ligament stem cells in vitro,and to explore the potential mechanism. METHODS:Periodontal ligament stem cells were isolated from human periodontal ligament tissues by tissue explant enzyme digestion and cultured.The surface markers of mesenchymal cells were identified by flow cytometry.Periodontal ligament stem cells were incubated with 0,2.5,5,and 10 μg/mL oxymatrine.The effect of oxymatrine on the proliferation activity of periodontal ligament stem cells was detected by CCK8 assay.The appropriate drug concentration for subsequent experiments was screened.Western blot assay was used to detect the expression of stem cell non-specific proteins SOX2 and OCT4 in periodontal ligament stem cells.qRT-PCR and western blot assay were used to detect the expression levels of related osteogenic genes and proteins in periodontal ligament stem cells. RESULTS AND CONCLUSION:(1)The results of CCK8 assay showed that 2.5 μg/mL oxymatrine significantly enhanced the proliferative activity of periodontal stem cells,and the subsequent experiment selected 2.5 μg/mL oxymatrine to intervene.(2)Compared with the blank control group,the protein expression level of SOX2,a stem marker of periodontal ligament stem cells in the oxymatrine group did not change significantly(P>0.05),and the expression of OCT4 was significantly up-regulated(P<0.05).(3)Compared with the osteogenic induction group,the osteogenic genes ALP,RUNX2 mRNA expression and their osteogenic associated protein ALP protein expression of periodontal ligament stem cells were significantly down-regulated in the oxymatrine+osteogenic induction group(P<0.05).(4)The oxymatrine up-regulated the expression of stemness markers of periodontal ligament stem cells and inhibited the bone differentiation of periodontal ligament stem cells,and the results of high-throughput sequencing showed that it may be associated with WNT2,WNT16,COMP,and BMP6.

The plants of the genus Caragana Fabr. are desert plants of the Leguminosae family, which are widely used in traditional ethnomedicine, with the effects of nourishing Yin and nourishing blood, dispelling wind and removing dampness, clearing heat and detoxifying toxins. The anti-inflammatory effect of Caragana Fabr. has attracted much attention, the research on the related mechanism has made some progress, but it lacks systematic collation. By summarising the anti-inflammatory effects of the active ingredients of Caragana Fabr., the authors found that they have good anti-inflammatory activities on different inflammatory cell models in vitro, and have good improvement effects on rheumatoid arthritis, colitis, complex nephritis, and acute lung injury and other disease models. The anti-inflammatory effects of the active components of this genus mainly include the reduction of the levels of a variety of pro-inflammatory factors, and the signalling pathways involved mainly include TLR4/NF-κB, TLR4/MAPK, TLR4/NF-κB/IRF3, JAK/STAT-1, ERK/STAT-1 and so on. Therefore, the paper mainly reviews the research progress on the anti-inflammatory effects and mechanisms of the Caragana Fabr. plants and their active components according to disease types, with a view to providing reference for the in-depth study of their anti-inflammatory activities and the development of new products with related functions.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Systemic lupus erythematosus （SLE）， a refractory autoimmune disease， is among the dominant diseases where traditional Chinese medicine （TCM） shows advantages in the field of rheumatology and immunology. The China-Japan Friendship Hospital hosted the "46^th Youth Salon on Dominant Diseases （Systemic Lupus Erythematosus）" organized by the China Association of Chinese Medicine， which led to a consensus on "the advantages， challenges， interdisciplinary approaches， and translational achievements of integrated TCM and Western medical approaches in the diagnosis and treatment of SLE." The diagnosis and treatment of SLE currently face several challenges， such as frequent misdiagnosis and missed diagnosis in the early stages， difficulty in achieving treatment targets， multiple side effects from pharmacotherapy， and the lack of management strategies for special populations， all of which hinder the fulfillment of the clinical needs of patients. Integrated TCM and Western medical approaches can improve clinical symptoms such as skin erythema， aversion to cold and cold limbs， fatigue， dry mouth， restlessness， and heat sensation in the palms and soles， thereby improving patients' quality of life. The approaches also help consolidate the efficacy of conventional Western medicine， slow disease progression， reduce relapse rates， address multi-organ involvement， and prevent or treat complications. Additionally， they enhance efficacy and reduce toxicity， prevent the side effects of Western medications， help reduce hormone use， and offer distinct advantages in the individualized intervention of special populations， contributing to the whole-process management of the disease. However， evidence-based medical support for this integrated approach remains limited， and the quality of available evidence is generally low. Common evaluation systems and modern research methodologies should be adopted to clarify the efficacy of TCM in SLE treatment. Efforts should be made to carry out high-quality evidence-based medical research， strengthen the development of fundamental and pharmacological research， and further explain the distinct advantages of TCM in the diagnosis and treatment of SLE. Future efforts should focus on advancing the integration of TCM and modern medicine， incorporating multi-omics technologies， individualized stratification， and other precision medicine concepts， in combination with artificial intelligence. Moreover， interdisciplinary collaboration should be promoted to utilize modern technology in exploring the essence of TCM theories and screening effective formulae， thereby comprehensively improving the diagnosis and treatment of SLE through integrated TCM and Western medical approaches.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.