Objective To investigate the impact of Toxoplasma gondii type I, II and III rhoptry protein 16 (ROP16) on programmed cell death ligand 1 (PD-L1) expression in lung adenocarcinoma cells, and to examine the effects of T. gondii type I ROP16 protein on the relative PD-L1 expression, the relative PD-L1 distribution on the cell membrane surface, and the binding of programmed cell death 1 (PD-1) to PD-L1 in lung adenocarcinoma cells. Methods Lentiviral vectors overexpressing T. gondii type I, II and III ROP16 proteins were generated, and transfected into the human lung adenocarcinoma A549 cell line. A549 cells were used as a blank control group, and A549 cells transfected with an empty lentiviral expression vector were used as a negative control group, while A549 cells transfected with lentiviral vectors overexpressing T. gondii type I, II and III ROP16 proteins served as experimental groups. Stably transfected cells were selected with puromycin and verified using Western blotting, quantitative real-time PCR (RT-qPCR), and immunofluorescence assays. The PD-L1 expression was quantified at translational and transcriptional levels using Western blotting and RT-qPCR assays in A549 cells in the five groups, and the relative PD-L1 distribution was detected on the A549 cell membrane surface using flow cytometry. In addition, the effect of T. gondii type I ROP16 protein on the PD-1/PD-L1 binding was measured in A549 cells using enzyme-linked immunosorbent assay (ELISA). Results The relative ROP16 protein expression was 0, 0, 1.546 ± 0.091, 1.822 ± 0.047 and 2.334 ± 0.089 in the blank control group, negative control group, and the T. gondii type I, II and III ROP16 protein overexpression groups (F = 1 339.00,P < 0.001), and the relative ROP16 mRNA expression was 2.153 ± 0.949, 2.436 ± 1.614, 14.343 ± 0.020, 12.577 ± 0.285 and 15.090 ± 0.420 in the blank control group, negative control group and the T. gondii type I, II and III ROP16 protein overexpression groups, respectively (F = 483.50,P < 0.001). The ROP16 expression was higher in the T. gondii type I, II and III ROP16 protein overexpression groups than in the blank control group at both translational and transcriptional levels (allP values < 0.001). Immunofluorescence assay revealed that T. gondii type I, II and III ROP16 proteins were predominantly localized in A549 cell nuclei. Western blotting showed that the relative PD-L1 protein expression was 0.685 ± 0.109, 0.589 ± 0.114, 1.007 ± 0.117, 0.572 ± 0.151, and 0.426 ± 0.116 in the blank control group, negative control group, and the T. gondii type I, II and III ROP16 protein overexpression groups (F = 9.46,P < 0.05), and RT-qPCR assay quantified that the relative PD-L1 mRNA expression was 1.012 ± 0.190, 1.281 ± 0.465, 1.950 ± 0.175, 0.889 ± 0.251, and 0.230 ± 0.192 in the blank control group, negative control group, and the T. gondii type I, II and III ROP16 protein overexpression groups (F = 14.18,P < 0.05). The PD-L1 expression was higher in the T. gondii type IROP16 protein overexpression group than in the blank control group at both translational and transcriptional levels (both P values < 0.05). Flow cytometry detected that the relative distributions of PD-L1 protein were (10.83 ± 0.60)%, (11.23 ± 0.20)%, and (14.61 ± 0.50)% on the A549 cell membrane surface (F = 28.31, P < 0.05), and the relative distribution of PD-L1 protein was higher in the T. gondii type IROP16 protein overexpression group than in the blank control group and negative control group (both P values < 0.001). ELISA measured significant differences in the absorbance (A) value among the T. gondii type IROP16 protein overexpression group, the blank control group and the negative control group if the concentrations of the recombinant PD-1 protein were 0.04 (F = 10.45, P < 0.05), 0.08 μg/mL (F = 11.68, P < 0.05) and 0.12 μg/mL (F = 52.68, P < 0.05), and the A value was higher in the T. gondii type IROP16 protein overexpression group than in the blank control group and the negative control group (both P values < 0.05), indicating that T. gondii type IROP16 protein promoted the PD-L1/PD-1 binding in A549 cells in a concentration-dose manner. Conclusions T. gondii type IROP16 protein overexpression may up-regulate PD-L1 expression in A549 cells at both transcriptional and translational levels and the relative PD-L1 distribution on the A549 cell membrane surface, and affect the PD-1/PD-L1 binding in a concentration-dependent manner.

This article discusses the key pathogenesis of atherosclerosis （AS） based on the physiological characteristics and pathological changes of lipids and introduces the therapeutic effect of Zhuyuwan on AS， aiming to provide a theoretical basis for the treatment of cardiovascular diseases from the spleen. As essential substances， lipids have the same essence but different forms. They circulate throughout the body with body fluids under the action of Yang Qi to nourish the nutrient Qi and support the defensive Qi. Lipid metabolism disorder often leads to the obstruction of Qi movement， the accumulation of dampness and turbidity， and the generation of phlegm and blood stasis. It has been proven that the formation of vulnerable plaques in AS is attributed to the interaction of three pathogenic factors： deficiency of healthy Qi， phlegm-turbidity， and collateral stasis. Their pathological essence is closely related to abnormal lipid metabolism. As lipids constitute the thick and dense components of body fluids， their impaired dispersion may lead to phlegm-turbidity and blood stasis， the pathological process of which is predominantly ascribed to the dysfunction of the spleen in distributing essence. Therefore， AS is rooted in spleen-stomach disorder， manifests as plaques formed by pathological product accumulation in vessels， with lipid transport disorder as its core pathogenesis. Specifically speaking， the dysfunction of spleen in transportation with accumulation of dampness-turbidity marks the initial stage， and blood turbidity and coagulation and phlegm-nodules accumulating in vessels represent the intermediate phase. Cold accumulation and stagnated heat transforming into toxins represent the terminal stage. Zhuyuwan， first recorded in Taiping Holy Prescriptions for Universal Relief， contains equal proportions of Coptidis Rhizoma and Evodiae Fructus. Coptidis Rhizoma， bitter and cold， exerts descending and purging actions to assist stomach Qi in lowering turbidity. Evodiae Fructus， pungent-bitter and hot， disperses obstruction and promotes free flow to support spleen Qi in ascending the clear. The compatibility of Coptidis Rhizoma and Evodiae Fructus ascends the clear and descends the turbid to harmonize Yin and Yang， assisting the spleen in distributing essence and resolving lipid accumulation to reduce lipid levels. In terms of the therapeutic mechanism， Zhuyuwan modulates lipid metabolism by correcting immune-inflammation network imbalance， improving gut microbiota composition and metabolism， and enhancing reverse cholesterol transport. By analyzing the pathological characteristics of lipid transport disorder in AS， this study delves into the intrinsic connections between cardiovascular disease and lipid transport disorder， giving novel insights into the prevention and treatment of AS.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

This article discusses the key pathogenesis of atherosclerosis （AS） based on the physiological characteristics and pathological changes of lipids and introduces the therapeutic effect of Zhuyuwan on AS， aiming to provide a theoretical basis for the treatment of cardiovascular diseases from the spleen. As essential substances， lipids have the same essence but different forms. They circulate throughout the body with body fluids under the action of Yang Qi to nourish the nutrient Qi and support the defensive Qi. Lipid metabolism disorder often leads to the obstruction of Qi movement， the accumulation of dampness and turbidity， and the generation of phlegm and blood stasis. It has been proven that the formation of vulnerable plaques in AS is attributed to the interaction of three pathogenic factors： deficiency of healthy Qi， phlegm-turbidity， and collateral stasis. Their pathological essence is closely related to abnormal lipid metabolism. As lipids constitute the thick and dense components of body fluids， their impaired dispersion may lead to phlegm-turbidity and blood stasis， the pathological process of which is predominantly ascribed to the dysfunction of the spleen in distributing essence. Therefore， AS is rooted in spleen-stomach disorder， manifests as plaques formed by pathological product accumulation in vessels， with lipid transport disorder as its core pathogenesis. Specifically speaking， the dysfunction of spleen in transportation with accumulation of dampness-turbidity marks the initial stage， and blood turbidity and coagulation and phlegm-nodules accumulating in vessels represent the intermediate phase. Cold accumulation and stagnated heat transforming into toxins represent the terminal stage. Zhuyuwan， first recorded in Taiping Holy Prescriptions for Universal Relief， contains equal proportions of Coptidis Rhizoma and Evodiae Fructus. Coptidis Rhizoma， bitter and cold， exerts descending and purging actions to assist stomach Qi in lowering turbidity. Evodiae Fructus， pungent-bitter and hot， disperses obstruction and promotes free flow to support spleen Qi in ascending the clear. The compatibility of Coptidis Rhizoma and Evodiae Fructus ascends the clear and descends the turbid to harmonize Yin and Yang， assisting the spleen in distributing essence and resolving lipid accumulation to reduce lipid levels. In terms of the therapeutic mechanism， Zhuyuwan modulates lipid metabolism by correcting immune-inflammation network imbalance， improving gut microbiota composition and metabolism， and enhancing reverse cholesterol transport. By analyzing the pathological characteristics of lipid transport disorder in AS， this study delves into the intrinsic connections between cardiovascular disease and lipid transport disorder， giving novel insights into the prevention and treatment of AS.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

To investigate the correlation between vitamin D nutritional status and insulin resistance in pubertal adolescents.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.